Nexo ID24-T6060, ID24-TI2040-PW, ID24-T9040-PW, ID24-T12060-PW, ID24-I9040-PW Users Manual

User Manual

DP2117-07b-DI

ID24t – ID24i

Page 2/11

1 CONTENTS

1 CONTENTS ...................................................................................................................................................................... 2

2 WARNINGS ...................................................................................................................................................................... 3

3 ID24 – ACCESSORIES ................................................................................................................................................... 4

4 DESCRIPTION ................................................................................................................................................................ 5

5 SETUPS ID24 .................................................................................................................................................................. 5

6 HORN ROTATION ......................................................................................................................................................... 6

7 CROSSOVER FREQUENCY ........................................................................................................................................... 6

8 ARRAY EQ ....................................................................................................................................................................... 6

9 MAINTENANCE .............................................................................................................................................................. 7

10 TECHNICAL SPECIFICATIONS ................................................................................................................................ 10

11 USER NOTES ................................................................................................................................................................ 11

EU Conformity declaration

We, NEXO SA
ZA DU PRE DE LA DAME JEANNE
60128 PLAILLY – France

Declare under our sole responsibility that the product Loudspeaker

Type ID24
Serial number On the product
Is in conformity with the provisions of the following 2006/95/CE (Low Voltage Directive)

directive including all applicable amendments:
Applied rules and standards: EN ISO 12100, EN 60065
Plailly, December 18th, 2015 Joseph CARCOPINO, R&D Director

Page 3/11

2 WARNINGS

PRECAUTIONS

Do not open the speaker, do not try to disassemble it neither to modify it in any way. The system doesn’t include any user-repairable part.
If the system seems to be malfunctioning or damaged, stop using it at once and have it repaired by a NEXO qualified technician.

Do not expose the system directly to the sun or to the rain, do not immerse it into fluids, do not place objects filled with liquid on the system.
If a liquid gets into the system, please have it inspected by a NEXO qualified technician.

The connection of ID24 should be performed by qualified technician, by ensuring that power is off.
Operating temperature with temperate climate: 0°C to +40°C (-20°C to +60°C for storage).

SAFETY INFORMATIONS

Read this manual before using the speaker.
Keep this manual available for further reference.
Observe all warnings and cautions.
Please check the NEXO Web site nexo-sa.com to get the most up-to-date version of this manual.
Ensure you are aware of the safety rules applying to rigging, stacking or installing on tripod or speaker stand. Failure to observe these rules

may expose persons to potential wounds or even death.
Only use the system with accessories specified by NEXO.
Please always consult a NEXO-accredited technician if the installation needs architectural works and observe following precautions:

Mounting Precautions:

- Please select screws and mounting location supporting 4 times the system weight.

- Do not expose the system to excessive dust, vibrations, to extreme cold or hot temperatures, to reduce the risk of damaging
components.

- Do not place the system in an unstable position: it could fall accidentally.

- If the system is used on a tripod, please ensure the tripod’s specifications are adapted and that it’s height does not exceed

1.40m/55”. Do not move the tripod with the system in position.

Connection and Powering Precautions:

- Unplug connected cables before moving the system.

- Power off the system before connecting the system.

- When switching on the installation, the amplifier must be powered last; when switching the installation off, shut off the
amplifier first.

- If you work by cold temperatures, progressively raise the level to nominal value during the first minutes of use, to allow
the system components to stabilize.

Please check regularly the system condition.

HIGH ACOUSTIC PRESSURE LEVELS

Exposure to very high sound pressure levels may cause permanent hearing losses. Degrees of hearing losses may be different from one
person to another, but almost everybody will be affected if exposed to high sound pressure levels during a long period of time. The OSHA
(Occupational Safety and Health Administration) American Agency specified the following maximal exposures:

Number of Hours

Sound Pressure Level (dBA), Slow Response

8

90 6 92

4

95

3

97 2 100

1 ½

102 1 105

½

110

¼ or less

115

Page 4/11

WASTE OF ELECTRIC OR ELECTRONIC EQUIPMENT

This symbol on the product or its packaging indicates that this product must not be treated as household waste.
Instead, it is your responsibility to hand it over to a designated collection point for the recycling of waste electrical
and electronic equipment. By ensuring your waste equipment is recycled, you will help prevent potential negative
consequences for the environment and human health, which could appear if this product was not recycled.
Recycling helps spare natural resources. For more information about the recycling of this product, please contact
your local city office, your household waste disposal service or your reseller.

3 ID24 – ACCESSORIES

ID24t

IDT-GSTK

IDT-TCBRK2538-V2 / TCBRK3851-V2 /
QRA-V2

IDT-TVP

Rigging emplacements :

- 5 prints for IDT-QRA / IDT-TCBRK

- Rear panel plate for IDT-GSTK

- M10 threaded insert for IDT-TVP (WARNING, for other fasteners, the length of thread must be less than 12mm).

ID24i

IDI-WB02

IDI-WM01

Rigging emplacements :

- 6 x M6 threaded inserts on the speaker belt for mounting accessories.

Security Slot: you can find a Kensington Security Slot on each ID24

ID24i

ID24t