New Holland TT75A, TT45A, TT50A, TT60A User Manual

New Holland TT-A Series Tractor Specifications

TT45A TT50A TT60A TT75A

MODEL TT45A TT50A TT60A TT75A

†

NGINE

Type ...................................................................................................................................................4-cycle, diesel ...................................................................................................

Number of cylinders / Aspiration 4 / NA 4 / NA 3 / NA 4 / NA Displacement, cu. in. (L) 121.7 (2.0) 135.2 (2.2) 179 (2.9) 238 (3.9) Gross engine horsepower, HP (kW) 40 (28.8) 48 (35.8) 56 (41.7) 75 (56) PTO horsepower, HP (kW) 35 (26.1) 42 (31.3) 47 (35) 62 (46.3)

Rated speed (RPM) 2,600 2,800 ............................................. 2,500..................................................

Fuel type ...........................................................B5 Biodiesel (meeting ASTM 6751 standards).............. .............B20 Biodiesel (meeting ASTM 6751 standards) .................

Air filter..................................................................................Dual element, dry type with cleanable outer element and replaceable inner safety element.......................................

Lubrication..........................................................................................Full flow, pressure lubrication with vertical mount spin-on filter cartridge ....................................................

Oil & filter change interval ............................................................100 hours .......................................... ..........................................300 hours...............................................

Starting aid..........................................................................................................................................Thermostart.....................................................................................................

Throttle....................................................................................................................................Hand and/or foot controlled ........................................................................................

Exhaust....................................................................................................................Under hood muffler w/ horizontal exhaust pipe.........................................................................

Emissionization standard .........................................................................................................................Tier-II..........................................................................................................

Fuel tank capacity, gal. (L) .............................................................13.4 (51)........................................... ...........................................16.4 (62)................................................

TRANSMISSION

Base on Standard tractor ...................8F x 2R with 4 constant mesh gears and 2 constant mesh ranges 8F x 2R with 4 (2 synchronized) gears and 2 constant mesh ranges

Traction clutch, in. (mm)................................................................................................Dry, 11 (279.4) diameter organic plate................................................................................

Ground speed*, mph (k/hr)....................................................................Forward - 1.9 to 19.0 (3 to 30.5), Reverse - 2.6 to 9.5 (4.1 to 15.3)

Final drive / rear axle ...........................................................................................................Outboard bull gear / Flange axle .....................................................................................

Rear differential lock.........................................................................................................Mechanical foot pedal engagement...................................................................................

Service brakes .............................................................................................................Individual mechanically actuated wet disc .............................................................................

Parking brake........................................................................................................Engage hand-lever, press brakes to engage brakes ......................................................................

and/or standard diesel fuels and/or standard diesel fuels

HYDRAULICS

System type ...............................................................................................................Open center, fixed displacement gear pump............................................................................

System pressure, psi (bar)..........................................................2,538 (175)......................................... .........................................2,755 (190)..............................................

Implement pump capacity, gpm (L/min)........................................9.8 (37) ............................................ .........................................10.8 (40.5) ..............................................

Steering & services system, gpm (L/min) ......................Hydrostatic power steering............................. .............................Hydrostatic power steering .................................

Total maximum tractor flow, gpm (L/min) ....................................17.2 (65)........................................... .........................................19.3 (72.5)..............................................

Remote valves - standard.........................................................................................................................None ..........................................................................................................

Remote valves - optional......................................................................................1 to 2 open center, rear mounted, lever controlled.......................................................................

3-POINT HITCH

Rear.......................................................................................................................................................Standard .......................................................................................................

Category....................................................................................................................II, convertible to I with interchangeable balls...........................................................................

Position control / draft sensing..........................One lever position control / No draft control ............... ..........One lever position control / Optional draft control, ...............

Lower link ends ........................................................................................................................................Fixed ..........................................................................................................

Stabilizers...........................................................................................................................................Check Chains....................................................................................................

Lift capacity (OECD @ ball ends), lbs. (kg) ................................2,550 (1160)........................................ 2,930 (1332) 3,410 (1546)

PTO

Rear ................................................................................................................................Standard, w/ flip-up PTO shaft guard.................................................................................

Clutch type......................................................................................................................Independent, 11-in. organic plate, dry ................................................................................

Engagement ......................................................................................................................One lever, mechanical engagement...................................................................................

Speed.....................................................................................................................................................540 RPM.......................................................................................................

Engine speed with PTO at 540 RPM ................................................2,555.............................................. ..............................................1,967 ..................................................

w/dedicated gear pump - 7.4 (28) w/dedicated gear pump - 8.5 (32)

2 valve open center loader control valve, joystick controlled

top link sensing

Page 1 of 2

New Holland TT-A Series Tractor Specifications

TT45A TT50A TT60A TT75A

MODEL TT45A TT50A TT60A TT75A

RONT AXLE

F 2WD

Track adjustment, in. (mm) 50.3 (1277) to 70.6 (1793) 52.2 (1326) to 68.7 (1744) ..............................56.4 (1432) to 74 (1879)...................................

Maximum turn angle............................................................................................................................55 degrees......................................................................................................

Maximum axle oscillation ....................................................................................................................11 degrees......................................................................................................

Steering cylinder & linkage................................................................................................Contained behind main axle beam ...................................................................................

FWD

Track adjustment, in. (mm).................................................................NA................................................ 57.6 (1462) to 78.1 (1984) 59.6 (1515) to 79.6 (2022)

Maximum wheel turn angle ................................................................NA................................................ .........................................55 degrees..............................................

Maximum axle oscillation ...................................................................NA................................................ .........................................11 degrees..............................................

Steering cylinder & linkage.................................................................NA................................................ ...........................Contained in main axle beam................................

Front differential lock ..........................................................................NA................................................ .........................................Limited slip..............................................

FWD clutch engagement.....................................................................NA................................................ .....................................Mechanical lever..........................................

ELECTRICAL

Alternator..................................................................................12 Volt, 40 Amp ..................................... .....................................12 Volt, 45 Amp ..........................................

Battery capacity (cold cranking amps)...............................................600 ............................................... ...............................................800....................................................

Lighting...................................................................................................2 hi/lo beam halogen headlights, flashing safety lights / turn signals ........................................................

Accessory power outlets...........................................................................................Standard equipment, 7-pin implement outlet...........................................................................

Fuses...........................................................................................................................................Automotive blade type.............................................................................................

APPROXIMATE SHIPPING WEIGHT

ROPS - 2WD, lbs. (kg) 3,600 (1633) 3,738 (1695) 4,540 (2049) 4,740 (2150)

ROPS - FWD, lbs. (kg)........................................................................NA................................................ 4,989 (2263) 5,189 (2354)

†Manufacturer's estimate *TT75A w/16.9x30 tires NA - Not Applicable

Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).

Design, materi als a nd/or specifications ar e sub ject t o chan ge wit hout noti ce and wi thout lia bility the refor. Specificat ions are applicable to units sold in Canada, the United Stat es, its territo ries and possessio ns, and may var y ou tside these areas .

Safety begins with a thorough understanding of

the equipment. Always make sure you and

your operators read the Operator’s Manual

before using the equipment. Pay close

attention to all safety and operating

decals and never operate machinery

without all shields, protective devices

and structures in place.

Page 2 of 2