New Holland TV6070 User Manual

New Holland

™

TV6070 Bidirectional

TractorSpecifications

TV6070

MODEL TV6070

ated PTO power, HP (kw) 105 (78)

ENGINE

Make/model FPT Type 6-cylinder parent bore diesel Fuel Injection Bosch mechanical pump, direct injection Bare engine power, HP (kw) 155 (116) Rated speed, RPM 2,200 Idle speed, RPM 850-950 Displacement, cu. in. (L) 6 / 411 (6 / 6.7) Aspiration Turbocharged/air-air intercooled Air cleaner Dual element dry with aspirated spin tube precleaner Cold start aids Grid heater/coolant block heater Bio diesel compatibility Up to 100%

ELECTRICAL

Type 12v negative ground Batteries Two group 31 low maintenance Cold start rating, each, CCA 950 Alternator, amps 120

TRANSMISSION

Type Multi-range closed-loop hydrostatic Pump Variable displacement, mechanical operator control Motor Electronically controlled 8-range variable displacement Ground speeds in ranges, MPH (KPH)

Braking Dynamic braking by moving lever to neutral position

1 0 to 6.7 (10.8) 2 0 to 7.7 (12.4) 3 0 to 8.3 (13.4) 4 0 to 9.1 (14.6) 5 0 to 10.3 (16.6) 6 0 to 11.6 (18.7) 7 0 to 16.2 (26.0) 8 0 to 19.5 (31.4)

AXLES AND BRAKES

Axle type HD flange with inboard planetary reduction Differential lock, cab end Standard Differential lock, engine end Optional Oscillation, degrees 10 Brake type Wet disc in cab-end axle, hydraulic actuation Total brake area, in. Parking brake Cable actuation of service brakes

PTO SYSTEMS

Type Mechanical 540/1000 RPM Shafts Interchangeable 1 3/8" diameter Locations: cab end Standard

Engagement Electro-hydraulic

(cm2) 507 (3271)

engine end Optional

Page 1 of 2

New Holland

™

TV6070 Bidirectional

TractorSpecifications

TV6070

MODEL TV6070

YDRAULIC SYSTEMS

Standard system-type

Type CCLS with piston pump Total flow @ 2200 engine RPM, GPM (LPM) 29.5 (111) Pressure compensator, PSI (Bar) 3,000 (207) Remote valves-standard cab end 3 In-cab flow controls 3 Valve actuation Hand levers, foot pedals Remote valves-optional engine end 2 Valve actuation Hand levers Couplers 1/2" ISO, 2 for each valve

Optional auxiliary hydraulics

Type CCLS with piston pump; electronic flow control

Maximum flow @ 2200 engine RPM, GPM (LPM) 35 (133) Pressure compensator, PSI (Bar) 4350 (300) Couplers 3/4" ISO, with 1/2" case drain

3-POINT HITCHES

Type Category II, flex link ends and sway links Controls Electronic position control, auto and manual modes Standard cab end

Lift capacity @ 24" behind links, lbs. (kg) 6,500 (2950) Optional cab end

Lift capacity @ 24" behind links, lbs. (kg) 8,700 (3950) Optional engine end

Lift capacity @ 24" behind links, lbs. (kg) 4,000 (1800)

STEERING

Type Hydrostatic power Articulation angle 45 degrees maximum Curb clearance circle, ft. in. (m) 32' 10" (10.0)

CAB

Type 2-Door ROPS/FOPS Tinted safety glass, area, ft Climate control Pressurizer, heater/defroster, air conditioning Fan 3-speed Seat Air suspension, 7 comfort adjustments Turnabout™ console 210 degree rotation to face either driving direction

DRAWBARS

Type 3-position adjustable, swinging Cab end Standard Engine end Optional

REFILL CAPACITIES

Fuel tanks, gal. (L) 55 (208) Engine oil, gal. (L) 5 (19) Engine coolant, gal. (L) 7.25 (27) Hydraulic system/rear axle, gal. (L) 13.5 (51) Front axle, gal. (L) 6.5 (25)

Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).

Design, materials and/o r spe cifications ar e sub ject to chan ge w ithout no tice and with out liabi lity ther efor. Specificat ions are applicable to units sold in Canada, the United Stat es, its territo ries and possessio ns, and may var y ou tside these areas .

2(m2

) 61 (5.67)

Safety begins with a thorough understanding of

the equipment. Always make sure you and

your operators read the Operator’s Manual

before using the equipment. Pay close

attention to all safety and operating

decals and never operate machinery

without all shields, protective devices

and structures in place.

Page 2 of 2