New Holland K-11, K-94, K-24, K-90 User Manual

New Holland
Industrial Dryer Specifications

K-11 K-24 K-90 K-94

MODEL K-11 Tabletop Dryer K-24 K-90 K-94

Overall Height 19.5 in. 36.5 in. 40.5 in. 46.5 in.
Work Height 16 1/8 in. 30 1/2 in. 37 in. 43 in.
Table Space Required 9 3/8 in. x 14 in. ———
Floor Space Required — 24 in. x 37 in. 31 in. x 40 in. 31 in. x 40 in.
Weight 79 lbs. 400 lbs. 615 lbs. 690 lbs.
Operating Speed 1,100 rpm 825 rpm 625 rpm 625 rpm
Motor Size 1/8 hp 1 hp 2 hp 3 hp
Basket Size 6 in. x 6 in. 12 in. x 12 in. 18 in. x 18 in. 18 in. x 24 in.
Capacity 7 lbs. 75 lbs. 150 lbs. 250 lbs.
Bearings 2, sealed ball 2, tapered roller 2, tapered roller 2, tapered roller
Reversible Control No Yes Yes Yes
Drive Direct coupled 2 V-belts 2 V-belts 2 V-belts
Constuction Arc-welded steel plate Arc-welded steel plate Arc-welded steel plate Arc-welded steel plate
Electrical System 110/120 VAC 50/60Hz 208, 220, 440, or 208, 220, 440, or 208, 220, 440, or

Heating Unit 600 watts switchable electric (Optional) electric; steam (Optional) electric; steam (Optional) electric; steam
Amperage Starting: 10.1/10.4 Starting and operating amperage Starting and operating amperage Starting and operating amperage

Meets N.E.C. Specifications Yes Yes Yes Yes
U.L. Recognized Yes Yes Yes Yes
Grease Fittings None Exposed Exposed Exposed
Meets J.I.C. Specifications — Yes Yes Yes

OPTIONS

Soft Start — Yes Yes Yes
Variable Speed — Yes Yes Yes
Timer — Yes Yes Yes
Temperature Control — Yes Yes Yes

in. x 6 in. 12 in. x 12 in. 18 in. x 18 in. 18 in. x 24 in.

6

550 VAC at 60Hz; 550 VAC at 60Hz; 550 VAC at 60Hz;
380 VAC at 50Hz; 3-phase 380 VAC at 50Hz; 3-phase 380 VAC at 50Hz; 3-phase

Operating: 6.7/7.1 varies with voltage selected varies with voltage selected varies with voltage selected

For more information or to find an authorized New Holland industrial dryer
distributor, contact us at:

CNH America LLC
P.O. Box 1895, M.S. 237
New Holland, PA 17557-0903

Phone: [phone]
Fax: [phone]

or visit our Web site at www.newholland.com/na

Design, material s and/or specifica tions are subject to
change wit hout n otice and without liabi lity therefor.
Specificat ions are applica ble to units sold in Ca nada, the
United States, its territori es and possess ions, and may
var y ou tside these areas .

© 2008 CNH America LLC

Safety begins with a thorough understanding of

the equipment. Always make sure you and

your operators read the Operator’s Manual

before using the equipment. Pay close

attention to all safety and operating

decals and never operate machinery

without all shields, protective devices

and structures in place.

Page 1 of 1