New Holland
Haybine® Mower-Conditioner Specifications
472 488 499
MODEL |
472 |
CUTTERBAR WIDTH, ft. in. (mm) |
7’3” (2210) |
OVERALL WIDTH |
|
Operating, ft. in. (mm) |
11’11” (3632) |
Transport, ft. in. (mm) |
10’4-3⁄4”(3168) |
OVERALL LENGTH |
|
Operating, ft. in. (mm) |
13’1” (3988) |
Transport, ft. in. (mm) |
13’1” (3988) |
HEIGHT |
|
Operating, ft. in. (mm) |
3’5-3⁄4” (1060) |
Raised, ft. in. (mm) |
4’8” (1422) |
WEIGHT, lbs. (kg) |
2110 (957) |
DRIVE |
540 rpm PTO |
TRACTOR REQUIREMENT |
30-hp (22.4 kw) or greater |
|
with standard ASAE hitch |
|
and PTO locations |
488
9’3” (2819)
13’8-1⁄4” (4172) 12’2” (3708)
13’4” (4064) 13’4” (4064)
3’6” (1067) 5’7” (1702)
2763 (1253)
540 rpm PTO
35-hp (26.1 kw) or greater with standard ASAE hitch and PTO locations
499
12’3” (3734)
19’8” (5994) 13’9” (4191)
16’8” (5080) 21’6” (6553)
6’2-1⁄2” (1892) 6’8-1⁄2” (2045)
4480 (2032)
540 or 1000 rpm PTO hydrostatic system
60-hp (45 kw) or greater with standard ASAE hitch and PTO locations.
Two remote hydraulic systems required capable of 1750 psi (12066 kpa).
HEADER FLOTATION |
Full, lateral |
HEADER LIFT |
|
Guardpointsmaximumlift, in. (mm) |
18-1⁄2 (470) |
REEL |
4-tine bar |
Peripheral speed, mph (kph) |
6.2 to 8.2 (10.4 to 13.2) |
Diameter (maximum), ft. in. (mm) |
3’6-1⁄4” (1073) |
CUTTERBAR |
|
Knives |
Bolted, over-serrated |
|
sections |
Guards |
Twin-forged steel, double- |
|
hardened or stub guards |
Cutting height, in. (mm) |
Adjustable from 1-1⁄4 to 4-1⁄4 |
|
(32 to 108) |
SICKLE DRIVE |
wobble joint |
Speed, spm |
1632 |
Stroke, in. (mm) |
3 (76) |
Full, lateral
19 (483)
4-tine bar
6.5 to 8.6 (10.5 to 13.8)
3’6-1⁄4” (1073)
Bolted, over-serrated sections
Twin-forged steel, doublehardened or stub guards Adjustable from 1-1⁄4 to 4-1⁄4 (32 to 108)
wobble joint 1632 3 (76)
Full, lateral, independent of conditioning rolls
19-1⁄2 (495)
Rolareel standard—4.8 to 7.9
(7.7 to 12.7) with reduction kit—4.0 to 6.6 (6.5 to 10.7) 3’7-1⁄2” (1105)
Two opposing assemblies — bolted over-serratedsections, adjustable hold-downs Twin-forged steel, doublehardened or stub guards Adjustable from 1-1⁄4 to 6-1⁄4 (32 to 159)
enclosed gearbox 1700 3 (76)
Page 1 of 2