New Holland H8000 Series
Self-Propelled Windrower Specifications
H8040 H8040 Prairie Special H8060 H8080
MODEL H8040 H8060 H8080
ENGINE New Holland 4-cylinder New Holland 6-cylinder New Holland 6-cylinder
..........................................................................................................................Turbocharged with air-to-air intercooler....................................................................................
Rated horsepower (kW)* 126 (94) @ 2,300 rpm 190 (142) @ 2,200 rpm 226 (168) @ 2,200 rpm
Fuel injection pump Mechanical Electronically controlled Electronically controlled
Batteries / alternator 1, 12-Volt 925 CCA / 150 amp 2, 12-Volt 650 CCA / 150 amp 2, 12-Volt 650 CCA / 150 amp
Fuel capacity, gal. (L) .......................................................................................................................120 (454) ...........................................................................................................
Rotary radiator screen cleaner..........................................................................................................Standard............................................................................................................
TRANSMISSION.....................................................................................................................Dual range hydrostatic.................................................................................................
Final drive ...........................................................................................................................Double reduction planetary..............................................................................................
Steering...........................................................................................................................................Hydrostatic..........................................................................................................
Speed range, mph (kph) 0-10.6 (0-17) working** 0-12.5 (0 - 20) - working*** 0-12.5 (0 - 20) - working***
LENGTH, with header 283.1 (7192) with HS Series 269.5 (6847) with 2355 269.5 (6847) with 2358
Less header and lift arms, in. (mm)............................................................................................205.2 (5213).........................................................................................................
Height, in. (mm) 134.1 (3415)** 136.1 (3456)*** 136.1 (3456)***
Wheelbase, in. (mm).......................................................................................................................138 (3494) ..........................................................................................................
Front tread width, in (mm) 127 (3225)** 130.2 (3308)*** 130.2 (3308)***
Rear tread width (adjustable), in. (mm)..........................................................................90-105-120 (2286-2667-3048) ..........................................................................................
Rear axle suspension.........................................................................................................................Optional.............................................................................................................
Tractor weight, lbs. (kg) 10,745 (4874)** 11,365 (5155)*** 11,365 (5155)***
Rear axle tires..............................................................................................................................14L x 16.1 8PR.......................................................................................................
Rear axle ground clearance 35.7 (908) 35.7 (908) 38.8 (986)
Header drive......................................................................................................................................Hydraulic............................................................................................................
Header flotation Hydraulic (in-cab adjustable) .......................Independent hydraulic flotation (flotation weight at each end
HEADER TILT
Hydraulic ...........................................................................................................................................Standard............................................................................................................
Header power reverser......................................................................................................................Standard............................................................................................................
Adjustable windrow shields..............................................................................................................Standard............................................................................................................
In-cab windrow-width adjustment.....................................................................................................Optional.............................................................................................................
Single lever header
Transport lock system ....................................................................................................................Standard............................................................................................................
8040 PRAIRIE SPECIAL
H
274 cu. in. (4.5 L) 411 cu. in. (6.7 L) 411 cu. in. (6.7 L)
high pressure common rail high pressure common rail
0-15.8 (0-25.4) - road** 0-18 (0 - 29) - road*** 0-18 (0 - 29) - road***
with 18.4 x 26 front tires with 18.4 x 26 front tires with 23.1 x 26 front tires
of header independently controlled from cab)............................................
CAB ....................................................................................................................................Deluxe, curved tinted glass..............................................................................................
Cab suspension.................................................................................................................................Standard............................................................................................................
Cab air filtration............................................................................................Dual: 1 external air filter and 1 in-cab recirculation filter.......................................................................
Seat ...............................................................................................Deluxe air suspension seat with fore/aft lumbar adjuster, ride dampening ........................................................
Instructor seat...................................................................................................................................Standard............................................................................................................
*Manufacturer's rating per ECE R120 / ISO 14396 **with 18.4 x 26 tires ***with 23.1 x 26 tires
HEADERS Sickle Hay Headers Disc Hay Header Draper Headers
12HS* 14HS 16HS 18HS 720HD** 750HD 770HD 21HB** 25HB 30HB 36HB
12 ft., 3 in. 14 ft., 3 in. 16 ft., 3 in. 18 ft., 3 in. 13 ft. 15 ft., 5 in. 18 ft. 21 ft. 25 ft. 30 ft. 36 ft.
H8040 •••• NA NA NA ••••
H8060 •••• •• NA ••••
H8080 •••• •• • ••••
*12-foot header requires 16.9 x 28 drive tires **not compatable with 23.1 x 26 drive tires
Page 1 of 5
New Holland
HS Series Sicklebar Header Specifications
12HS 14HS Specialty 16HS 18HS
MODELS 12HS 14HS / 14HS SPECIALTY 16HS 18HS
utting width, ft. in. (m) 12' 3" (3.73) 14' 3" (4.34) 16' 3" (4.95) 18' 3" (5.56)
C
Overall width, ft. in. (m) 14' 3" (4.34) 16' 3" (4.95) 18' 3" (5.56) 20' 3" (6.17)
Weight, lb. (kg) – rubber rolls 3,630 (1647) 3,900 (1770) / 3,180 (1442) 4,120 (1869) 4,370 (1983)
CUTTERBAR
Type .....................................................................................................................................Timed, dual, counterstroking.........................................................................................
Knives.........................................................................................................................................Overserrated, bolted ...............................................................................................
Guards 2-tine, double-hardened 2-tine, double-hardened(14HS) 2-tine, double-hardened 2-tine, double-hardened
Angle range, degrees...........................................................................................................................-6 to -12.........................................................................................................
Skid shoes 24 44
Cutting height, in. (mm).............................................................................................................1.2-6.2 (30.5-157.5)...............................................................................................
SICKLE DRIVE
Type ............................................................................................................................................Open, dual, wobble ................................................................................................
Speed, SPM 1,810 1,810 / 1,828 1,810 1,810
Stroke, in. (mm)....................................................................................................................................3 (76)...........................................................................................................
2-tine stub, double-hardened,
independent adjustable
hold-down (14HS Specialty)
REEL
Type 5-bat 5-bat / 6-bat 5-bat 5-bat
Adjustments .................................................................................................................................Fore/aft & vertical .................................................................................................
SPEED
Mechanical drive, rpm 52-83 52-83 / NA 52-83 52-83
Hydraulic drive (optional), rpm 0-76 0-76 / Standard 0-76 0-76 0-76
Speed adjustment Variable sheave Variable sheave / In cab Variable sheave Variable sheave
Diameter, in. (mm) .............................................................................................................................42 (1067)........................................................................................................
Drive Belt & chain Belt & chain / Hydraulic motor and chain Belt & chain Belt & chain
Tine bars............................................................................................................................................Segmented.......................................................................................................
Bushings/bearings, in. (mm) ..........................................................1.25 (31.75) bearing w/collar at cam end & bushings at all other locations....................................................
CONDITIONER
Type Chevron-design Chevron-design Chevron-design Chevron-design
Roll length (crush area), in. (mm) 102 (2591) 102 (2591) / NA 102 (2591) 102 (2591)
Roll diameter, in. (mm) 10.375 (263.5) 10.375 (263.5) / NA 10.375 (263.5) 10.375 (263.5)
Roll drive Spur gearbox & PTOs Spur Gearbox & PTOs / NA Spur gearbox & PTOs Spur gearbox & PTOs
Speed, rpm 717 717 / NA 717 717
Roll pressure Hand crank Hand crank / NA Hand crank Hand crank
Roll gap Adjustable stop-bolt Adjustable stop-bolt / NA Adjustable stop-bolt Adjustable stop-bolt
Windrow width, in. (mm) 38-96(910-2438) 38-96 (910-2438) / 60 (1324) 38-96 (910-2438) 38-96 (910-2438)
AUGER
Type ................................................................................................................................................Single, floating....................................................................................................
Diameter, in. (mm) ..............................................................................................................................20 (508).........................................................................................................
Floating range, in. (mm) ......................................................................................................................2 (50.8) .........................................................................................................
Flighting depth, in. (mm)......................................................................................................................5 (178)..........................................................................................................
Speed, rpm 287 287 / 215 287 287
intermeshing rubber intermeshing rubber / NA intermeshing rubber intermeshing rubber
or 83 (2108)
OPTIONS (field-installed)
• Crop dividers
• High-contact chevron conditioning rolls
• Hydraulic reel drive (requires windrower drive kits)
• Reel truss kit
• Push bar extension kit (for tall crops)
• Slatted steel conditioner rolls (for cane crops)
• Stub guard conversion kit (standard or speciality heads)
• Right and left-hand conditioner throat opening wear plates
(recommended for abrasive soil conditions)
• Stainless steel replacement floor inserts (for abrasive soil conditions)
• Gauge wheels
Page 2 of 5
New Holland
®
Discbine
720HD 750HD 750HD Specialty 770HD
MODEL 720HD 750HD 750HD SPECIALTY 770HD
INDROWER MODEL H8060/H8080 H8060/H8080 H8060/H8080 H8080
W
Header drive........................................................................................Hydrostatically driven header with dual hydraulic header drive motors........................................................
Cutting width, ft. in. (m) 13' (3.96) 15' 4" (4.7) 15' 4" (4.7) 17' 11" (5.45)
Overall width, ft. in. (m) 13' 3" (4.04) 15' 6" (4.75) 15' 6" (4.75) 18' 1" (5.51)
Weight, lbs. (kg) 3010 (1365) 4680 (2123) 3305 (1499) 4890 (2218)
MODULAR DISC CUTTERBAR
Number of discs 10 12 12 14
Maximum disc speed, rpm.....................................................................................................................3000............................................................................................................
Number of reversible,
swing-away knives 20 (2 per disc) 24 (2 per disc) 24 (2 per disc) 28 (2 per disc)
Knife tip speed, mph (kph) 187 (301) 187 (301) 187 (301) 187 (301)
Flotation ....................................................................................................................Hydraulic adjustment from windrower cab..............................................................................
Cutting angle and height..............................................................Standard hydraulic control, from 2 to 12 degrees (minimum: 0.6 in. [15 mm]).................................................
Transport height—
bottom of skid shoes, in. (mm) 24.5 (622) 29.6 (754) 29.6 (754) 29.6 (754)
Hood liner.................................................................................................................High density, impact-resistant polyethylene.............................................................................
CONDITIONER
Type Chevron-design, intermeshing Chevron-design, intermeshing NA Chevron-design, intermeshing
Length, in. (m) 102 (2.6) 102 (2.6) NA 102 (2.6)
Roll speed, rpm 920 923 NA 923
Roll pressure Torsion-bar roll pressure system Torsion-bar roll pressure system NA Torsion-bar roll pressure system
Roll gap Adjustable stop-bolt Adjustable stop-bolt NA Adjustable stop-bolt
Windrow/swath width, in. (mm) 38–96 (965–2438) 38–96 (965–2438) 60 (1524), 83 (2108) 38–96 (965–2438)
Disc Header Specifications
with standard skid shoes*
molded rubber rolls molded rubber rolls molded rubber rolls
adjusts with a single crank, adjusts with a single crank, adjusts with a single crank,
rolls separate automatically rolls separate automatically rolls separate automatically
“on the go” to allow thick “on the go” to allow thick “on the go” to allow thick
material to pass material to pass material to pass
or 100 (2540)
AUGER
Type NA Floating Floating Floating
Maximum diameter, in. (mm) NA 20 (508) 20 (508) 20 (508)
Flighting depth, in. (mm) NA 5 (127) Tapered, 7 (178) to 1 (25) 7 (178)
*with 18.4 x 26 tires **with 23.1 x 26 tires
OPTIONS (field-installed):
• Crop dividers
• High-contact chevron conditioning rolls
• High stubble kit
• Corner marker kit
• Slatted-steel conditioning bundle
• Gauge wheels
• Push bar
• Closure kit
Page 3 of 5
New Holland
HB Series Draper Header Specifications
21HB 25HB 30HB 36HB
MODEL 21HB 25HB 30HB 36HB
ERSIONS AVAILABLE
V
Single-knife drive, standard deck xx
Single-knife drive, double swath xx
Double-knife drive, standard deck xxx
Double-knife drive, double swath xx xx
HEADER
Cutting width, ft. (m) 21 (6.4) 25 (7.6) 30 (9.1) 36 (11)
Approximate weight (includes reel), lbs. (kg) 3880 (1760) 4135 (1875) 5021 (2278) 5434 (2465)
Cutting height (minimum), in. (mm) 1.0 (25)* 1.0 (25)* 1.0 (25) 1.0 (25)*
Castering gauge wheels NA Optional Standard Standard
Standard deck center windrow
width opening, in. (m) NA 80 (2.03) 80 (2.03) 80 (2.03)
Double swath center windrow
width opening, in. (m) 50 (1.27) 56 (1.42) 56 (1.42) 56 (1.42)
Slow speed header transport kit..............................................................................................................Standard.....................................................................................................
Transport height, in. (m) ................................................................................................40 (1.02) from tip of guards to ground)* ...........................................................................
CUTTERBAR
Cutting system............................................................................Choice of New Holland dual-knife system or Schumacher single-or dual-knife system........................................
Knife drive...................................................................................................Schumacher hydraulically-driven, planetary-reduction sickle drive........................................................
Sickles 2 1 or 2 1 or 2 2
Sickle speed - strokes per minute...............................................................................................................1400 ........................................................................................................
Sickle stroke, in. (mm) ............................................................................................................................3.31 (84).....................................................................................................
Hay guards...............................................................................................................................................Standard .....................................................................................................
REELS
Type Steel ..........Pick-up with steel or plastic fingers .......... Plastic fingers
Speed range 20–48 rpm 20–48 rpm 20–48 rpm 20–48 rpm
Drive.........................................................................................................................Direct hydraulic drive w/ 45 cu. in. (.74 L) motor ....................................................................
Hydraulic reel fore / aft adjustment Standard Optional Optional Standard
DRAPER BELTS
Belt width and construction................................42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection and molded V-Guide................
Speed range, ft. (m)......................................................................................................................0 - 705 (215) / minute ..........................................................................................
In cab canvas-speed control....................................................................................................................Standard.....................................................................................................
Angle..................................................................................................................................................10 to 20 degrees...............................................................................................
Double swath shift means .......................................................................................................................Hydraulic.....................................................................................................
* with 18.4 x 26 drive tires
OPTIONS (factory-installed)
• Poly cutterbar skid plates
• End-gauge wheels
• Castering gauge wheels for 25HB
• Cross auger kit
Page 4 of 5
New Holland SP Windrower Dual Windrow
Merger Attachment Specifications
GENERAL INFORMATION
Mechanical design Laterally-mounted, draper-belt conveyor; folds up under windrower belly frame when not in use, allowing single windrow or swath formation.
Crop delivery direction Right side, behind right front tire
Windrower compatibility Tier II, 6-cylinder models (non-draper) and all Tier III, 6-cylinder models (except with dealer-installed draper ready)
Windrower software requirement 7.1 or higher*
Header compatibility 15.5' and 18' disc headers with conditioning system
Belt construction Single ply w/two ply edges; vulcanized endless construction w/vee-guide tracking rib on inner surface and lateral
Belt tensioning Adjustable spring tension to minimized shock loading
Belt tracking Eye bolt adjustment at front end of driver roll
Merger conveyor flotation Table can float upward to minimize damage in the event of an obstruction or obstacle
HYDRAULIC SYSTEM
Raise/lower-deflector- belt drive Common system utilizing optional windrower-mounted auxiliary hydraulic system
Pump type Windrower-mounted, fixed-displacement
Pump capacity @ rated speed, gpm Tier II - 11.3 gpm (42.8 lpm); Tier III - 15.1 gpm (57.2 lpm)
Relief Pressure, psi (bar) 2000 (137.9)
Belt drive type Fixed-displacement gear motor drive through #50 chain
Motor displacement, cu. in. (cu. cm) 1.53 (25)
Conveyor belt speed range, mph (kph) 7 - 13 (11.3 - 21)
Raise/lower cylinder, in. (mm) 2.5 (63.5) diameter, double-acting w/mechanical transport lock
Side deflector cylinder, in. (mm) 1.5 (38.1) diameter, double-acting
SIDE DEFLECTOR
Design Top-hinged, formed steel deflector w/plastic lower extension to protect the deflector from damage in the event of hitting an obstruction or high-centering
Mounting frame Horizontal (manually) adjustable to accommodate two sizes of headers and operator preference on windrow shape and width
OPERATOR CONTROLS
Raise/lower Propulsion handle-mounted button control- fully up or fully down
Belt speed Right-hand console mounted, two-action On/Off switch and variable speed toggle switch
Side deflector Propulsion handle-mounted rocker-switch, variable position control
DIMENSIONS
Conveyor frame length, in. (mm) 77.4 (1966.2)
Conveyor frame width, in. (mm) 89 (2260.5)
Conveyor belt width, in. (mm) 42 (1066.8)
Conveyor belt length, in. (mm) 84.6 (2150) center to center of rolls
Belt roller diameter, in. (mm) 4 (101.6)
Ground clearance, operating, in. (mm) Adjustable; 5 (127) recommended (continuous ground contact is not intended)
Ground clearance, transport, in. (mm) 28 (711)
WEIGHT (merger attachment only; does not include aux. hyd. kit)
Shipping, lb. (kg) 1125 (510.3)
Operating, lb. (kg) 976 (443)
LUBRICATION
Grease points 50 hr. lube interval at 3 zerks
Drive chain 10 hr or daily interval; lube belt drive chain w/motor oil
OTHER REQUIREMENTS
Auxiliary hydraulic drive kit Select Tier II (dealer installed) or Tier III kit (factory- or dealer-installed option)
* 7.1 is assumed to be the level that will be installed concurrent w/MY09 Job 1 at this time (3/08). MY08 units have 7.0 installed. Special software was provided for each of the pre-build units.
Software on those units need not be replaced, unless other issues would necessitate it.
Merger folds down and forward (further forward at the left end) when deployed for merging application.
Movable deflector allows operator to control distance crop is thrown.
cleats on the outer surface to positively move material
Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377
Design, ma terials and/or s pecifications ar e s ubject to
chan ge w ithout no tice and with out liabi lity ther efor.
Specificat ions are applicable to units sold in Canada, the
United Stat es, its territ ories and possessi ons, and may
var y o utside these are as.
© 2008 CNH America LLC
New Holland is a regis tered tr ademark of CNH America LLC.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Page 5 of 5
Loading...