New Holland F62B User Manual

New Holland
Forage Blower Specifications

F62B

MODEL F62B

LENGTH 108 in. (2,743 mm)

WIDTH 100 in. (2,540 mm)

WEIGHT 1,605 lbs. (729 kg)

BLOWER

Blowing height* Over 100 ft. (Over 30 m)
Blower housing 60 in. dia. (1,524 mm)
Paddles (adjustable) 8
Paddle tip speed 8,460 ft./min. (2,579 m/min.)
Drive Direct PTO

HOPPER

Diameter Auger–12 in. (305 mm)
Length Auger–50 in. (1,270 mm)
Width 37 in. (940 mm)
Height from ground Adjustable–20

to 27

Feeder type Auger

1

1

⁄2in. (520 mm)

⁄8in. (699 mm)

DRIVELINE PROTECTION Shearbolt

PTO 540 rpm

TIRES 4.80–8 “C” load range

CAPACITY (with adequate power)

Corn silage* Up to 180 tons/hr. (163 mt/hr.)
Haylage* Up to 110 tons/hr. (100 mt/hr.)

OPTIONAL EQUIPMENT Pipe Clamp

* Capacity and height will depend upon tractor horsepower, type of crop, moisture content, length of cut, as well as general maintenance of pipes and spout.
+ Available from New Holland Service Parts.

Kwik Pipe Bundle
Telescoping Pipe Section
Hinged Deflector
Safety Tow Chain+

Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).

Design, materials and/o r spe cifications ar e sub ject to
chan ge w ithout no tice and with out liabi lity ther efor.
Specificat ions are applicable to units sold in Canada, the
United Stat es, its territo ries and possessio ns, and may
var y ou tside these areas .

© 2008 CNH America LLC
New Holland is a regis tered trad emark of CNH America LLC.

Safety begins with a thorough understanding of

the equipment. Always make sure you and

your operators read the Operator’s Manual

before using the equipment. Pay close

attention to all safety and operating

decals and never operate machinery

without all shields, protective devices

and structures in place.

Page 1 of 1