New Holland BC5050, BC5080, BC5060, BC5000, BC5070 User Manual

New Holland BC5000 Series Small Square Baler Specifications

BC5050 BC5060 BC5070 BC5080

MODEL BC5050 BC5060 BC5070 BC5080

ALE SIZE:

Cross section, in. (cm) 14x18 (36x46) 14x18 (36x46) 14x18 (36x46) 16x18 (41x48)

Length, in. (cm) ................................................................................Adjustable, 12 to 52 (31 to 132) ..............................................................................

SUPER-SWEEP PICKUP:

Width inside, in. (m) 65 (1.65) 65 (1.65) 75 (1.9) 75 (1.9) Width on flare, in. (m) 70 (1.8) 70 (1.8) 80 (2) 80 (2) Number of teeth 88 on four tooth bars 110 on five tooth bars 156 on six tooth bars 156 on six tooth bars Floating windguard Eight rods Eight rods Thirteen rods Thirteen rods

Drive ........V-belt to roller chain to “lost motion” reel drive .......... ——

Gauge wheel 3.00x12; semi-pneumatic 3.00x12; semi-pneumatic 15x6.00x6 15x6.00x6

ROTARY FEEDING SYSTEM:

Type — Packer fork in combination Packer fork in combination Packer fork in combination

Drive — ............................Chain from main drive shaft; sealed ball bearings on all shafts ..........................

FLOW-ACTION

Type Six feeder tines on a moving —— —

Drive Chain; sealed ball bearings —— —

FEED OPENING, sq. in. (cm

FEEDING SYSTEM:

) 283 (1826) 283 (1826) 283 (1826) 318 (2052)

finger bar

with two paired rotors with three paired rotors with three paired rotors

PLUNGER:

Stroke length, in. (cm) 30 (76.2) 30 (76.2) 30 (76.2) 30 (76.2) Speed (540 rpm) 79 SPM 93 SPM 93 SPM 93 SPM

Construction ..........High-strength steel throughout; modified extension is built into the plunger face, eliminating the need for bolt-on extensions ........

TYING MECHANISMS:

Type Knotter Knotter or twister Knotter or twister (heavy-duty) Knotter (heavy-duty) Protection Shearbolt Shearbolt Shearbolt Shearbolt Capacity (twine) Four balls Six balls Eight balls Eight balls

(wire) NA Four coils Four coils NA

MAIN DRIVE:

Flywheel diameter, in. (cm) 22 (56) 22 (56) 22 (56) 22 (56) PTO Three-joint Three-joint Three-joint Three-joint

Protection ..........................................................................Shearbolt, overrunning and slip clutches........................................................................

Gearbox ................................................Hypoid with tapered roller bearings; heat-treated alloy steel running in oil ..............................................

TIRES:

Flotation (right) 25x7.50-15, 6PR 27x9.50-15, 6 PR 27x9.50-15, 6PR 11Lx15, 6PR

(left) 27x9.50-15, 6PR 31x13.50-15, 6PR 31x13.50-15, 6PR 14Lx16.1, 6PR

DIMENSIONS:

Height (max.), in. (cm) 58 (146) 70 (178) 71 (180) 71 (180) Width, in. (cm) 108 (275) 110 (279) 120 (304) 120 (304) Length:, in. (cm)

With 3-joint PTO and quarter-turn bale chute 240 (610) 247 (626) 247 (626) 247 (626)

Page 1 of 2

New Holland BC5000 Series Small Square Baler Specifications

BC5050 BC5060 BC5070 BC5080

MODEL BC5050 BC5060 BC5070 BC5080

EIGHT (APPROXIMATE):

With three-joint PTO,

twine version, lb. (kg) 3,085 (1399) 3,400 (1542) 3,715 (1685) 4,200 (1905)

With three-joint PTO,

wire version, lb. (kg) NA 3,536 (1603) 3,851 (1746) NA

RECOMMENDED TRANSPORT SPEED,

mph (km/h) 20 (32) 20 (32) 20 (32) 20 (32)

TRACTOR REQUIREMENT*

Horsepower (min.), hp (kW) 35 (26) 62 (45) 75 (56) 80 (60)

*Tractor weight must be greater than baler weight; excludes bale thrower.

OPTIONS

BC5050: two- or three-joint PTO (Cat. IV); hydraulic pickup lift; hydraulic tongue swing; needle slot baffle kit; auxiliary lights; road light kit; safety chain; wagon hitch and bale loading chute; triple-purpose chute; quarter-turn bale chute; hydraformatic bale tension; ball hitch (BC5070, BC5080 only); replaceable bale chamber, hydraulic doors kit and bale case extension kit (BC5080 only); bale case extension; grass feeder kit; safety chain; two-position hitch.

Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).

Design, materia ls an d/or sp ecifications are subject to chan ge wit hout n otice and wit hout l iabil ity th erefor. Specificat ions are applicable to units sold in Canada, the United Stat es, its territo ries and possessio ns, and may var y ou tside these areas .

Safety begins with a thorough understanding of

the equipment. Always make sure you and

your operators read the Operator’s Manual

before using the equipment. Pay close

attention to all safety and operating

decals and never operate machinery

without all shields, protective devices

and structures in place.

Page 2 of 2