NEW HOLLAND BB9OOO
BB9O6O BB9O8O
WORLD-WIDE LEADERSHIP IS NOT A COINCIDENCE
New Holland has played a dominant role in the big square
bale revolution from the start. Together with industry partners
New Holland was responsible for some of the major product
and feature introductions. This shared expertise is the basis for
the world-wide success of the uncontested leader on the big
baler market. Large farmers and contractors have given their
confidence to the brand and that confidence was awarded,
model after model.
PROVEN HERITAGE
4
8
10
14
16
BALING EXCELLENCE
SUPERIOR CHOPPING
COMFORT AND CONVENIENCE
RELIABILITY AND QUALITY
SPECIFICATIONS
BB9060
BB9080
THE HIGH PERFORMANCE FARMING
AND CONTRACTOR BUSINESS
Two models of big balers combining bale widths of
80 or 120 cm and bale height of 90 cm, represent the
largest portion of the big baler market. These different
bale sections not only result in different package volumes,
but also allow perfect adapting to any handling system
and storage situation. The two new models described
in this leaflet are a development of an extremely
successful and proven range of big balers.
Bale dimension (cm) BB9060 BB9080
Width 80 120
Height 90 90
Length 250 250
Even the shortest piece of straw or the smallest dry leaf
of valuable hay is taken up by the Super Sweep™ pick-up.
Proven characteristics like curved tines and close tine spacing
combined with an efficient wind-guard and pneumatic gauge
wheels help to sweep fields clean at a high speed.
TAKE ALL THE CROP
BALING EXCELLENCE45
BALES FORMED THE RIGHT WAY
The stuffer forks that lift the crop from the
pre-compression chamber to the bale chamber
only operate when the trip sensor fingers indicate
that the required density has been reached.
This assures a consistent bale density wad
after wad. This quality of a big bale is highly
appreciated when it is opened for bedding
or feeding.
EXCELLENT FIELD BEHAVIOUR
For a smooth field operation, the
Super Sweep™ pick-up mounting
includes an adjustable flotation spring.
Adjusting the flotation range is quick
and simple and doesn’t require the
use of any tools.
CONSISTENTLY FIRM PACKAGES
MAKE A PERFECT STACK
An extremely consistent density management
system that is monitored by IntelliView III™
monitoring systems, constantly measures the
load on the plunger sensors.
Any change in that load or any change of
the density requirement results in an automatic
adjustment of the hydraulic pressure on the side
doors and top chamber rail. Each and every
bale will be exactly made the way you want it!
SQUARE CORNERS, EQUALLY FILLED
As the stuffer fork moves the pre-compressed
crop into the bale chamber, its speed is increasing.
This “fine tuning” of the bale formation process,
introduced on the new BB9000 models, further
assures a perfect filling of the top corners of the
bale, whether it be working in straw, hay or silage.
Higher bale density, lower strain on the
knotters and increased knotting reliability
are the known result of the proven double
knotter system. Two twines are fed to the
knotter who makes a final knot for the bale
that is complete and a starting knot for
the bale that is still “in production”.
Four knotters on the 80 cm wide models
and six knotters on the 120 cm wide
models maintain the bale integrity even
when producing high density bales.
THE RIGHT KNOT, 4 OR 6 PER BALE
BALING EXCELLENCE67
FULLY INFORMED: BALE MOISTURE CONTENT
Accurate information about the condition of the crop being
baled prevents processing a crop which is not really ready.
The displayed information provided by the moisture sensing
system available as a dealer installed accessory, also allows
precise application of additives. Because the two star wheels
are penetrating the bale, they provide an extremely accurate
measurement of the moisture content.
RELIABLE KNOTTER EFFICIENCY
Knotter fans are fitted as standard: clean knotters add to the
knotter performance. The new round shielding on the knotter
compartment furthermore amplifies the air-flow for improved
fan efficiency.
SUPERIOR CHOPPING89
Varying crop-growing conditions, evolving
crop conservation methods and specific fodder
requirements call for different chop lengths.
The new range of BB9000 big balers provide
the flexibility that is requested by the customers.
IN RESPONSE TO VARYING
CHOP LENGTH REQUIREMENTS
Crop Cutter options / Knife Distance (mm) BB9060 BB9080
6 knives (packer cutter) 114 –
11 knives (Medium cut) 78 –
17 knives (Medium cut) – 78
23 knives (Short Cut) 39 –
33 knives (Short Cut) – 39
REDUCED POWER CONSUMPTION WITH THE
CROPCUTTER™ SYSTEM
The proven design of the CropCutter™ system with the W-tine
pattern rotor assures an even spread of the cutting force and
a smooth cutting action. The ingenious design not only divides
the power requirement equally over the two rotor halves –
for both the 80 cm and the 120 cm bale widths – but it
assures an equal distribution of the crop over the full
of the pre-compression chamber and the bale chamber.
EXCELLENT CHOPPING WITH THE PACKER CUTTER
A basic cutting of the straw or silage, using three packer forks and six double tines
is possible on the 80 cm wide models. This introduces an important degree of crop
compaction for improved silage and a reduced number of bales to be handled, and
it also eases the feeding. Engaging or disengaging the cutting function on these
packer cutter models is done with ease from the comfort of the tractor seat.
EASY SHARPENING DEMANDS LESS ENERGY
The knife drawer can be slid out of the baler to exposes the
knives for easy sharpening. The simplicity, with which this is
carried out, encourages the operator to do it when required,
resulting in a smoother cutting action that demands less
power. To extend the interval between sharpening a hard
faced knives kit is available as a dealer installed accessory.
COMFORT AND CONVENIENCE10 11
MONITORING
TO SUIT YOUR FLEET
BB9000 big balers are ready for operating with any ISOBUS
compatible tractor. Full baler information and control are
possible using the tractor’s built in monitor.
In case the baler will be operated by a non ISOBUS tractor,
it can be fitted with a separate monitor.
Added advantages of the new IntelliView III™ touch screen
monitor are:
• Easy navigation between screens with simple
finger tip operation.
• An output that can be linked to a rear view
camera available as a dealer installed accessory,
for improved visibility.
RELY ON THE SAFE BALE DELIVERY
Highly appreciated in any crop and working
condition is the roller bale chute. It is standard
equipment on all models. For even smoother
ejection the last two rollers are mounted on
bearings. The long bale chamber lower floor
also adds to a smooth bale ejection and the
design of the side supports of the bale chute
assures a long service life.
HAVE A LOOK BEHIND
A quick inspection of the completed bale,
a check if reversing is safe, or checking
for any traffic behind while on the road.
It is made possible with the dealer installed
camera which can be connected to the
IntelliView llI™ touch screen colour monitor.
The monitoring/camera display is easily
switched from the cab, while at work.
FULL OR PARTIAL BALE-EJECT™ SYSTEM
For easy cleaning out of the baler after finishing a
day’s work, the standard Bale-Eject™ system fully
clears the bale chamber of any remaining crop.
Two rails in the bottom of the bale chamber,
each with 4 tines, operated by hydraulics with a
dedicated control lever at the rear of the baler, eject
the entire bale completely from the bale chamber.
Allowing ejection of only the completed bale and
leaving the start of the next bale in the chamber, is
made possible with the optional dealer installed
accessory partial Bale-Eject™ system which can be
added to the standard full Bale-Eject™ system.
Separate pushing teeth on each side of the
chamber are activated by separate hydraulics. By
leaving a number of wads inside the bale chamber,
the start off of the next bale is much faster for
increased in-field productivity.
COMFORT AND CONVENIENCE12 13
ALL DAY COMFORT
AXLE CHOICE TO SUIT ANY OPERATING TERRAIN
For adapting to the area of operation and to the basic field conditions a choice can
be made between a single axle and a tandem axle. The large diameter tyres mounted
on single axle units reduce the risk of bulldozing whereas the tandem axle reduces soil
compaction as well as vertical baler movement. It also improves the ride when working
in the field or when travelling on the road at high speed.
SLIM HITCH FOR TIGHT TURNS
The design of the drawbar includes a straight driveline arrangement.
The overall tongue construction is kept narrow. This results in a 5%
improvement on headland turns when compared to previous range
and improves the overall baling capabilities. It also improves the
baler’s manoeuvrability when on the road or in the yard.
ENHANCED MANOEUVRABILITY
To reduce ground friction the models with a rotor cutter can be fitted
with an Auto-Steer™ tandem axle. The steering system allows the
tyres to follow the driving direction. To reduce ground compaction
and bulldozing tendency even further, a new Auto-Steer™ tandem
axle with large 620/50x22.5 tyres can be specified.
5%
more
agility
TWINE FOR A LONG BALING DAY
A maximum of 30 twine balls can be stored in
the dust proof twine box. This keeps you going
for the longest working day in any condition.
HANDY WEIGHING ON-THE-GO
A bale weighing system with an accuracy
of +/- 2% that can easily handle different
bale sizes in any kind of crop condition is
available as a dealer installed accessory.
It provides a quick and reliable recording
of valuable information for the farmer as
well as for the contractor.
MONITOR CONTROLLED OILING
AND GREASING GIVES PEACE OF MIND
Increased reliability and reduced maintenance
requirements are achieved by the automatic oiling
system. There is also an automatic centralised
greasing bank which gives easy access to all
greasing points and is controlled from the monitor
in the cab.
IDEAL BALE LENGTH CONSISTENCY
Maximum bale length accuracy eliminates frustration
in the haulage and stacking process and improves
crop conservation. Fitted in addition to the mechanical
bale length measuring system, the dealer installed
electronic system uses the “average wad” information
to trip the knotting cycle. The precision of the system
is guaranteed by the notched wheel that measures a
precise movement of the bale in the bale case. Setting
or changing the bale length is extremely simple and is
controlled from the comfort of the tractor seat.
RELIABILITY AND QUALITY14 15
DURABLE BY DESIGN
A DURABLE MONOCOQUE FRAME
A vital requirement for a long baler life is
a rugged overall construction. Keeping
all essential components on their precise
locations and maintaining the strength
required for a powerful job is achieved thanks
to the massively engineered one-piece frame.
THE BEST IN CLASS KNOTTER
WITH ABSOLUTE REFINING
An important part of the development effort with the
new BB9000 range of big balers, was directed to the
knotter performance. Although proven for many years
all over the world, the complete system was looked at
in detail, and taking into account the development of
the tying requirements detailed refinements were made
to further upgrade the double knotting system: larger
diameter knotter brake disc, reduced twine tension,
changes to the bill hook profile and other detail
changes have resulted in more than 15,000 bales
without a single mistie during testing.
STURDY GEARBOXES KEEP YOU GOING LONGER
A high capacity baling operation that includes
the processing of large amounts of crop implies
the transmission of high forces. On the New Holland
big balers, gearboxes are used for all main drivelines,
which results in increased reliability and lower
maintenance requirements.
LOW KNOTTER STRAIN
STRETCHES SERVICE INTERVALS
The renowned double knotter system on
New Holland big balers allows higher bale
density as there is virtually no strain on the twine
and knotter components during bale formation.
Two twine feed positions mean that the twines
do not slide over the bale surface while crop
is pushed through the bale chamber. Extended
knotter life is an important advantage which
adds to the reliability of the baling process.
MODELS
BB9O6O BB9O8O
Typ e Standard (SY) Packer Cutter (PY) Rotor Cutter (RY) Standard (SY) Rotor Cutter (RY)
Bale dimensions
Width / Maximum length (cm) 80 / 260 80 / 260 80 / 260 120 / 260 120 / 260
Height 90 90 90 90 90
Tractor requirements
Minimum PTO Power (kW/hp) 75/102 80/110 95/130 90/122 110/150
Main Drive
Protection Shearbolt, overrunning clutch and slip clutch
Super Sweep™ Pick-up
Width (DIN 11220) (m) 1.98 1.98 1.98 2.25 2.4
CropCutter™ system – 6 11 or 23 – 17 or 33
Knife distance (mm) – 114 78 or 39 – 78 or 39
Knife removal – From the front Sliding knife drawer – Sliding knife drawer
Feeding system
Feeder 2 packer forks 3 packer forks Rotor 3 packer forks Rotor
6 single tines 6 single tines Width 972mm 9 single tines Width 1356mm
“W” tine configuration “W” tine configuration
Feeder Protection Slip Clutch Slip Clutch Cut-out clutch Slip Clutch Cut-out clutch
Stuffer
fork type with 4 tines fork type with 6 tines fork type with 4 tines fork type with 6 tines fork type with 6 tines
Stuffer Protection Shearbolt Shearbolt Shearbolt Shearbolt Shearbolt
Plunger
Speed (Strokes/min) 42 42 42 42 42
Length of stroke (mm) 710 710 710 710 710
Tying system
Type Double knot type Double knot type Double knot type Double knot type Double knot type
Number of twines 44466
Knotter fan type Electric Electric Electric Electric Electric
Knotter function alert Monitor and visual Monitor and visual Monitor and visual Monitor and visual Monitor and visual
Knotter Lubrication Grease Grease Grease Grease Grease
Twine ball capacity 30 30 30 30 30
Bale density system
Proportional 3-way control Monitor controlled Monitor controlled Monitor controlled Monitor controlled Monitor controlled
Manual override GGGGG
Electronic control system
ISO 11783 Connection Ready GGGGG
IntelliView III™ touch screen colour monitor GGGGG
Axles Tyre size
Single axle 710/40x22.5 710/40x22.5 710/40x22.5 710/40x22.5 710/40x22.5
Large wheel tandem axle with Auto-Steer™ system – – 620/50R22.5 – 620/50R22.5
Baler dimensions
Width (Single axle) (mm) 2580 2580 2580 2580 2580
Width (Tandem axle) (mm) 2520 2520 2520 2520 2520
Standard Equipment: Standard Bale-Eject™ system, Roller bale chute / hydraulic folding.
Optional Equipment: Automatic greasing, Partial bale-Eject™ system, Working lights, Camera monitoring system, Bale weighing system, moisture measuring system, Hard face knife
kit, Electronic Bale Length system.
G
Standard OOptional – Not Available
AT YOUR OWN DEALER
Visit our web site at: www.newholland.com - tel: +61 2 9673 7777
31-53 Kurrajong Road, St Marys NSW 2760
The data indicated in this folder is approximate. The models described here can be subjected to modifications without any notice by the manufacturer.
The drawings and photos may refer to equipment that is either optional or intended for other countries. Please apply to our Sales Network for any further
information. Published by New Holland Brand Communications. Bts Adv. - Printed in Australia - BB9000 05/09
Safety begins with a thorough understanding of the
equipment. Always make sure you and your operators
read the Operator’s Manual before using the
equipment. Pay close attention to all safety and
operating decals and never operate machinery
without all shields, protective devices and
structures in place.
YOUR SUCCESS - OUR SPECIALTY
SPECIFICATIONS 16
Loading...