Netgear NTV350 Installation Guide

NeoTV 350 HD Media Player (NTV350)

Installation Guide

©2010 NETGEAR, Inc. All rights reserved.

Technical Support

Thank you for selecting NETGEAR products.
Locate the serial number on the label of your product and use it to register

your product at http://www.NETGEAR.com/register. Registration is required
before you can use the telephone support service. Registration at the
NETGEAR website is strongly recommended.

Go to http://support.netgear.com for product updates and Web support.
For complete DoC please visit the NETGEAR EU Declarations of

Conformity website at: 

http://kb.netgear.com/app/answers/detail/a_id/11621/

Trademarks

NETGEAR, the NETGEAR logo, ReadyNAS, NeoTV, ProSafe, Smart
Wizard, and Auto Uplink are trademarks or registered trademarks of
NETGEAR, Inc. Other brand and product names are registered trademarks
or trademarks of their respective holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the products
described in this document without notice. NETGEAR does not assume
any liability that may occur due to the use or application of the product(s) or
circuit layout(s) described herein.

Package Contents

Ethernet cable

Remote control

NeoTV 350

Power adapter

Component cableA/V cable

Stand

AAA batteries (2)

3

Front and Back View

USB 2

Ethernet
HDMI

SPDIF

Component

A/V

Power

Card reader/

On/Off
button

USB 1

memory stick*

*4-in-1 card reader, SD/MMC/xD/Memory Stick

(Composite)

and
USB 3

Installation

Connect the NeoTV™350 to your TV, then connect a USB or
memory card storage device to the card reader or a USB port. You
can also connect the NeoTV 350 to your home network, as shown
in the following sections.

4