Netgear LB1110 Installation Manual
Quick Start
NETGEAR LTE Bridge 1110
LB1110-111AJS
LB1110-111NAS
LB1110-111PES
Package Contents
1. Install the micro SIM card.
Note: To obtain a micro SIM card, contact
your mobile broadband Internet service
provider.
a. Ensure that power to the bridge is o.
b. Remove the SIM card cover on the
bottom of the bridge.
c. Unlock the SIM card door.
d. Carefully slide the micro SIM card into the
slot.
e. Lock the SIM card door.
f. Close the SIM card cover.
2. Provide power to the bridge.
If you power your bridge through the power
adapter, do the following:
a. Connect the power adapter to the bridge
and plug it into an electrical outlet.
b. Press the power On/O button on the
bridge.
c. Wait for the Power LED to light green.
If you connect your bridge to a router that
provides Power over Ethernet (PoE), do the
following:
a. Connect one end of the yellow Ethernet
cable to the bridge Gigabit Ethernet port.
b. Connect the other end of the yellow
Ethernet cable to the Internet or WAN
port on the router. The port must provide
PoE.
c. Make sure that your router is receiving
power.
d. Wait for the Power LED to light green.
3. Connect the bridge to a router or directly
to a computer.
To connect the bridge to a router, do the
following (skip steps a and b if you already
connected the bridge to a router that
provides PoE):
a. Connect one end of the yellow Ethernet
cable to the bridge Gigabit Ethernet port.
b. Connect the other end of the yellow
Ethernet cable to the Internet or WAN
port on the router.
c. Use another Ethernet cable (not
provided) to connect your computer to a
LAN port on the router.
To connect the bridge directly to a computer,
do the following:
a. Connect one end of the yellow Ethernet
cable to the bridge Gigabit Ethernet port.
b. Connect the other end of the yellow
Ethernet cable to an Ethernet port on
your computer.
4. Launch a web browser.
NETGEAR genie displays.
If you do not see genie, do the following:
a. In the address field of the web browser,
enter http://192.168.5.1.
b. When prompted, enter password for the
password.
Mobile Broadband Internet Connection
By default, when the bridge powers up with a SIM card installed, it
automatically searches for and connects to your network provider’s mobile
broadband network. This process might take several minutes. The SIM card
that is installed determines the mobile broadband network to which the
bridge connects. However, if the bridge does not automatically connect
to your network provider’s mobile broadband network, you might need to
contact your network provider to get the access point name (APN) profile
information and add a custom APN profile in the bridge. For information
about adding a custom APN profile, see the user manual.
Download the NETGEAR AirCard App for
Smartphones and Tablets
Download and use the complimentary
NETGEAR AirCard app to view your connection,
settings, and data usage from your smartphone
or tablet.
Search the app store for NETGEAR AirCard at
http://www.netgear.com/aircardapps.
Support
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you
use only ocial NETGEAR support resources.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
You can get the user manual online at http://downloadcenter.netgear.com or
through a link in the bridge’s web pages.
To manage all bridge settings, use the bridge’s
web pages at http://192.168.5.1.
October 2015
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
Loading...