NETGEAR GSM7352Sv2, GSM7328Sv2 User Manual
ProSafe® 24-port, and 48-port
Gigabit L3 Managed Stackable Switches Data Sheet
GSM7328Sv2, GSM7352Sv2
Flexible, Stackable, Enterprise-class High-speed Switching!
NETGEAR’s low-cost, stackable, Gigabit Ethernet switches deliver maximum throughput and
flexibility where you need it — to high-speed, high-density workgroups at the edge of the
network, in the backbone of growing networks or for bandwidth-thirsty file and application
servers. The ProSafe GSM7328S and GSM7352S fully-managed switches deliver 24 and 48
ports of auto-sensing 10/100/1000 Mbps interfaces for high-density copper connectivity.
Four hot-swappable small form-factor pluggable (SFP) Gigabit interfaces provide optional
fiber connectivity for longer reach Gigabit Ethernet requirements. All switches have two 10
Gigabit Ethernet small form-factor pluggable (SFP+) interfaces and two high-speed, module
bays offering modular expansion for 10 Gigabit Ethernet or 48 Gigabit Stacking connectivity.
The non-blocking design of the switches delivers simultaneous, full wire-speed, low-latency
throughput to all ports.
A full suite of Layer 3 switching functionality ensures reliable routing between VLANs and
network segmentation where and when you need it, at no additional cost. By configuring the
switches into a stack of up to 8 units across a 48 Gbps bi-directional ring, a high-density, single
IP-addressable switch can be built.
Robust security features include IEEE 802.1x port-based authentication and access control
lists, ensuring that only authorized users can access your network. Secure management of the
switches is available through Secure Sockets Layer (SSLv3) for the Web GUI and Secured Shell
(SSH) for command-line sessions or with SNMP v3 for network management software. For
workgroup deployments in cost-sensitive organizations that require Layer 3 switching,
additional Gigabit capacity, high-value price point, flexibility of stacking, and reduced
maintenance requirements, NETGEAR’s ProSafe Gigabit Layer 3 Stackable switches deliver
the ideal access-edge solution.
With their high-value price point, flexible design, and reduced maintenance requirements,
NETGEAR’s ProSafe Gigabit Layer 3 Stackable switch solutions yield a high return on
investment, and are ideal for delivering highly reliable, converged voice, video, and data services
over a single network infrastructure.
Powerful
Easy to Use
Flexible Stacking
Non-stop Service
24/7
T E C H N I C A L
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: info@NETGEAR.com
In desktop switching environments, wire-speed performance with full QoS control for all
10/100/1000 interfaces is critical. The 2 built-in 10 GE SFP+ slots and the 2 module bays for
10 GE or 48 Gigabit stacking connectivity provide unprecedented performance, whether you are
stacking between switches, attaching servers or aggregating data to the core.
Simplify and reduce IT staff workload and mean time-to-repair with intuitive, GUI-based device
configuration, and an industry-standard command-line interface (CLI). The EZ-Config tool
simplifies initial configuration steps to streamline the out-of-box set-up. For easy tracking of port
usage, use the text-based port description to label how ports are used.
Stacking capabilities allow you to build a single-IP unique logical device with up to eight switches
utilizing intelligent bi-directional redundant stacking links. Stacking is flexible, it can either be via
AX742 kit (48 Gigabit stacking short connectivity) or longer reach 10 GE fiber uplinks.
The new rev 2 hardware now comes with a removable power module as the switch’s main power
supply. In the event of a power supply failure, the switch will change to use the external RPS
device for power, and the internal power module can be replaced without an RMA of the entire
switch. This will avoid the problem of service disruption or down time due to power supply failure.
*
ProSafe® 24-port and 48-port Gigabit L3 Managed Stackable Switches GSM7328Sv2, GSM7352Sv2
GSM7328SGSM7352S
File Servers
Gigabit NICs
GA311
Wireless Adapter
WAG5111
ProSafe Dual Band
Access Point
Wireless Adapter
WAG5111
Technical Specifications
•Physical Interfaces
– 24 or 48 RJ45 10/100/1000 ports with
Auto-Uplink™
– 4 shared SFP ports for fiber Gigabit
interfaces
– 2 built-in 10 Gigabit SFP+ ports
– 2 optional 10 Gigabit module bays
– RS-232 console
– USB port
‡
•Layer 2 Services
– IEEE 802.1Q Static VLAN (Up to
4k VLAN ID)
– IEEE 802.1p Class of Service (CoS)
– IEEE 802.1D Spanning Tree Protocol
– IEEE 802.1v Protocol VLAN & Port
VLAN
– Voice VLAN
– Guest VLAN
– IP subnet VLAN
– MAC-based VLAN
– IEEE 802.1 Q-in-Q
– IEEE 802.1w Rapid Spanning Tree
– IEEE 802.1s Multiple Spanning Tree
– IEEE 802.3ad Link Aggregation (Static
or LACP) up to 48 trunks
– IEEE 802.1x Port Access Authentication
– IGMP v1, v2, v3 snooping support
– IGMP querier
– Network storm protection including
broadcast, multicast and unicast traffic
– Static multicast filtering
– Port locking
– Ingress rate limit in 1 Kbps increments
– GARP/GVRP/GMRP
– DHCP snooping
– IP source guard
– Dynamic ARP inspection
– TACACS+
– LLDP
– LLDP-MED
Resilient Stacking:
GSM7328S
GSM7352S
– ISDP
– sFlow
– DoS
– Private group
– Protected port
– DHCP L2 relay
– MLD v1, v2 snooping
•Layer 3 Services
– VLAN routing
– Port routing
– RIP v1/v2 (RFC 1058, 2453)
– OSPF v2/v3 (RFC 1583, 2328)
– OSPF equal-cost multi-path
(4 - ECMP routes)
– VRRP (RFC 2338, 2787) 64 instances
– Access control lists (ACL) - MAC, IP, TCP
– ACLs – 1,024 Global
– ACL over VLAN
– Dynamic ACL
– COS
– DiffServ QoS (RFC 2998)
– DNS Caching
– DHCP/BOOTP relay -primary and
backup (RFC 3046, option 82)
– ICMP throttling
– DHCP v4/v6 server
– Captive portal
– Auto VoIP
– IP Helper
– PIM-DM (RFC 3973)
– PIM-SM (RFC 4601)
– IGMP v2,v3
– IGMP proxy
– DVMRP (RFC 1075)
– IPv6 unicast routing
– Neighbor discovery
– IPv6 tunnel
– OSFPv3 (RFC 2740)
– IPv6 PIM-SM
– IPv6 PIM-DM
– MLD (RFC 2710)
– MLD proxy
Linked Aggregation
Gigabit NICs GA311
‡
‡
‡
‡
‡
‡
‡
– DNSv6 (RFC 4472)
**The features listed assume the switch is running 8.0 release or newer.
***IPv6 routing and IP multicast routing is available for v1 hardware with software license upgrade.
‡
v2 only
Application Servers
Gigabit NICs
GA311
Firewall 200
FVX538
ModemProSafe VPN
Modem
Internet
•Switch Management Specifications
– SNMP v1, v2c, v3 with multiple
IP addresses
– RFC 1157, 1901-1910, 2574, 2575
– RFC 768 UDP
– UDP Relay
‡
– RFC 854-859 telnet
– RFC 951 BOOTP
– RFC 1213 MIB II
– RFC 1757 RMON groups 1,2,3, and 9
– RFC 1215 SNMP traps
– RFC 1493 Bridge MIB
– RFC 1643 Ethernet Interface MIB
– RFC 1534 DHCP and BOOTP
interoperation
– RFC 2131, 2132 DHCP and BOOTP
– RFC 2865 RADIUS (both switch and
management access)
– RFC 2866 RADIUS accounting
– RFC 3580 VLAN assignment via
RADIUS (Dynamic VLAN)
– Private enterprise MIB
– Port mirroring support
– Flow-based mirroring
– RFC 2030 Simple Network Time
Protocol (SNTP)
– RFC 1027 Proxy ARP
– SYSLOG
– TFTP, SFTP, HTTP, SCP, or local USB flash
‡
‡
firmware upgrade
– RFC 1519 CIDR
– Proxy ARP
– DNS lookup
‡
‡
‡
‡
– Port description
– Auto install
– IPv6 management
– Dual image
‡
•Single IP Address Management
(firmware version 7.3 or higher)
– Manage up to 48 fully
managed switches
– Feature can be used with the
following models:
‡
- FSM726E, FSM7226RS, FSM7250RS
- FSM7328S, FSM7352S, FSM7328PS,
FSM7352PS
- GSM7224R, GSM7248R
- GSM7328S, GSM7352S
Loading...