NETGEAR GSM7328S, GSM7352S User Manual

24/7

TECHNICAL

SUPPORT *

ProSafe® 24-, 24 SFP, and 48-port

*

Gigabit L3 Managed Stackable Switches Data Sheet

GSM7328S, GSM7328FS, GSM7352S

Flexible, Stackable, High Speed Switching!

NETGEAR’s low-cost, stackable, Gigabit Ethernet switches deliver maximum throughput and
flexibility where you need it — to high-speed, high-density workgroups at the edge of the
network, in the backbone of growing networks or for bandwidth-thirsty file and application
servers. The ProSafe GSM7328S and GSM7352S fully-managed switches deliver 24 and 48
ports of auto-sensing 10/100/1000 Mbps interfaces for high-density copper connectivity. Four
(GSM7328S) or eight (GSM7352S) hot-swappable Small Form-factor Pluggable (SFP) gigabit
interfaces provide optional fiber connectivity for longer reach Gigabit Ethernet requirements.
For high-density fiber installations, the GSM7328FS delivers 24 hot-swappable SFP Gigabit
interfaces for fiber connectivity and 4 combo ports of auto-sensing 10/100/1000 Mbps
interfaces for copper connectivity. All switches have four high-speed, module bays offering
modular expansion for 10 Gigabit Ethernet or 24 Gigabit Stacking connectivity. The
non-blocking design of the switches delivers simultaneous, full wire-speed, low-latency
throughput to all ports.

A full suite of Layer 3 switching functionality ensures reliable routing between VLANs and
network segmentation where and when you need it, at no additional cost. By configuring the
switches into a stack of up to 8 units across a 48 Gbps bi-directional ring, a high-density, single
IP-addressable switch can be built.

Robust security features include IEEE 802.1x port-based authentication and access control
lists, ensuring that only authorized users can access your network. Secure management of the
switches is available through Secure Sockets Layer (SSLv3) for the Web GUI and Secured Shell
(SSH) for command-line sessions or with SNMP v3 for network management software. For
workgroup deployments in cost-sensitive organizations that require Layer 3 switching,
additional Gigabit capacity, high-value price point, flexibility of stacking, and reduced
maintenance requirements, NETGEAR’s ProSafe Gigabit Layer 3 Stackable switches deliver
the ideal access-edge solution.

With their high-value price point, flexible design, and reduced maintenance requirements,
NETGEAR’s ProSafe Gigabit Layer 3 Stackable switch solutions yield a high return on
investment, and are ideal for delivering highly reliable, converged voice, video, and data services
over a single network infrastructure.

Powerful

Easy to Use

1-888-NETGEAR (638-4327)
Email: [e-mail]

In desktop switching environments, wire-speed performance with full QoS control for
all 10/100/1000 interfaces is critical. The 4 high-speed 10G/24G module bays provide
unprecedented flexibility, whether you are stacking between switches, attaching bandwidth­thirsty file servers, or aggregating critical data to the core of your network.

Simplify and reduce IT staff workload and mean time-to-repair with intuitive, GUI-based device
configuration, and an industry-standard command-line interface (CLI). The EZ-Config tool
simplifies initial configuration steps to streamline the out-of-box set-up. For easy tracking of
port usage, use the text-based port description to label how ports are used. Stacking capabilities
allow you to build a single-IP manageable device with up to eight switches utilizing
ultra-high-speed 48 Gbps across intelligent bi-directional redundant stacking links.

ProSafe® 24-, 24 SFP and 48-port Gigabit L3 Managed Stackable Switches GSM7328S, GSM7328FS, GSM7352S

Resilient Stacking:
GSM7328S
GSM7328FS
GSM7352S

ProSafe Dual Band
Access Point

Linked Aggregation

Internet

GSM7352SGSM7352S

Application Servers
Gigabit NICs
GA311

File Servers
Gigabit NICs
GA311

ModemProSafe VPN
Firewall 200
FVX538

Modem

Gigabit NICs GA311

Wireless Adapter
WAG5111

Wireless Adapter
WAG5111

Physical Interfaces

RJ-45 Connectors for 10BASE-T, –
100BASE-TX, and 1000BASE-T (Auto
Uplink™ on all ports):

-GSM7328S 24 ports

-GSM7328FS 4 ports

-GSM7352S 48 ports
Small form-factor pluggable (SFP) –

modules for fiber Gigabit Ethernet
interfaces:

-GSM7328S 4 slots

-GSM7328FS 24 slots

-GSM7352S 8 slots
(4) 10 Gigabit Ethernet/24G Stacking –

Module Bays
RS-232 Console Port –

Layer 2 Services•

IEEE 802.1Q Static VLAN (Up to –
4k VLAN ID)

IEEE 802.1p Class of Service (CoS) –
IEEE 802.1D Spanning Tree Protocol –
IEEE 802.1v Protocol VLAN & Port –

VLAN
IEEE 802.1 Q-inQ –
IEEE 802.1w Rapid Spanning Tree –
IEEE 802.1s Multiple Spanning Tree –
IEEE 802.3ad Link Aggregation (LACP) –

up to 48 trunks
IEEE 802.1x Port Access Authentication –
IGMP v1, v2 Snooping Support –
Network Storm Protection including –

Broadcast, multicast and unicast traffic
Static multicast filtering –
Ingress Rate Limit in 1Kbps increments –

Layer 3 Services•

VLAN routing –
Port routing –
RIP v1/v2 (RFC 1058, 2453) –
OSPF v2 (RFC 1583, 2328) –
OSPF Equal Cost Multipath (4 - ECMP –

routes)
VRRP (RFC 2338, 2787) 64 instances –
Access Control Lists (ACL) - MAC, IP, TCP –
ACLs – 1,024 Global –
DiffServ QoS (RFC 2998) –
DNS Caching –
DHCP/Bootp Relay -primary and –

backup (RFC3046, option 82)

Switch Management Specifications•

SNMP v1, v2c, v3 with multiple –
IP addresses

RFC 1157, 1901-1910, 2574, 2575 –
RFC 768 UDP –
UDP Relay –
RFC 854-859 telnet –
RFC 951 BootP –
RFC 1213 MIB II –
RFC 1757 RMON groups 1,2,3, and 9 –
RFC 1215 SNMP Traps –
RFC 1493 Bridge MIB –
RFC 1643 Ethernet Interface MIB –
RFC 1534 DHCP and BootP –

Interoperation
RFC 2131, 2132 DHCP and BootP –
RFC 2865 RADIUS (both switch and –

management access)
RFC 2866 RADIUS Accounting –
Private Enterprise MIB –
Port Mirroring Support –
RFC 2236 IGMP v2 –
IGMP Querier –
RFC 2030 Simple Network Time –

Protocol (SNTP)
RFC 1027 Proxy ARP –
SYSLOG –

Firmware upgrade via TFTP or HTTP –
Port Description –

Performance Specifications•

Forwarding modes: Store-and-forward –
GSM7328S/GSM7328FS: 144 Gbps; –

107.1 Mpps
GSM7352S: 192 Gbps; 285.7 Mpps –
Switch latency: < 6 us for 64-byte –

frames (10G to 10G)
< 2 us for 64-byte frames
(1G to 1G)

System memory: 256 MB –
Packet buffer memory: 334 KB –

embedded memory per port
Code Storage (Flash): 32 MB –
Address database size: 8K media –

access control (MAC) addresses
Number of VLANs: 512 –
Number of trunks: 48 –
Number of Queues: 8 –
Number of routes: 512 –
Jumbo frame support: up to 9K –

packet size
Acoustic noise: GSM7328S 52.4 dB –

GSM7328FS 51.7 dB
GSM7352S 52.8 dB

Heat Dissipation: –

-GSM7328S 273.12 BTU/hr

-GSM7328FS 266 BTU/hr

-GSM7352S 375.54 BTU/hr
Mean time between failures (MTBF): –

117,747 hours (~ 13.4 years)

User Interfaces•

Command Line Interface (CLI) via –
console port

Web-based management via –
embedded HTTP server protected with
Secured Sockets Layer

(SSLv3) or Transport Layer Security –
(TLS v1)

Telnet remote login (5 sessions) –
securable with Secured Shell
(SSH v1.5, v2)

ProSafe® 24-, 24 SFP and 48-port Gigabit L3 Managed Stackable Switches GSM7328S, GSM7328FS, GSM7352S

LEDs•

Per port: Speed, link, activity –
Per device: Power, fan status, stack ID, –

RPS, master

Network Standards Compatibility•

IEEE 802.3i 10BASE-T –
IEEE 802.3u 100BASE-TX –
IEEE 802.3u 100BASE-FX* –
IEEE 802.3ab 1000BASE-T –
IEEE 802.3z 1000BASE-X –
IEEE 802.3x Flow Control –
IEEE 802.3ae 10000BASE-X –

*Tested with Fiberxon SFP Modules

Physical Specifications•

Dimensions (w x d x h): –
440 x 385 x 43 mm
(17.32 x 15.16 x 1.7 in)

Weight: GSM7328S 4.5 kg (10 lb) –
GSM7352S 5.4 kg (12 lb)
GSM7328FS 5.4 kg (12 lb)

Environmental Specifications•

Operating temperature: –
GSM7328S/GSM7352S:
0° to 40° C (32 to 104° F)
GSM7328FS:
0° to 50° C (32 to 122° F)
Thermal sensor with SNMP trap
settings

Storage temperature: -20° to 70° C –
(-4 to 158° F)

Operating humidity: 90% maximum –
relative humidity, non-condensing

Storage humidity: 95% maximum –
relative humidity, non-condensing

Operating altitude: 3,000 m –
(10,000 ft) maximum

Storage altitude: 3,000 m –
(10,000 ft) maximum

Electrical Specifications•

Power Consumption: –

-GSM7328S 80 W maximum

-GSM7328FS 78 W maximum

-GSM7352S 110 W maximum

Electromagnetic Emissions•

CE mark –
EN55022 Class A - Emissions –
EN55024 - Immunity –
FCC Part 15 Class A –
VCCI Class A –
C-Tick –

Electromagnetic Safety•

CE mark –
EN 60950-1 –
UL/cUL 60950-1 –

Modules•

ProSafe AGM731F 1000BASE-SX –
SFP GBIC

ProSafe AGM732F 1000BASE-LX –
SFP GBIC

ProSafe AGM733 1000BASE-ZX –
SFP GBIC

ProSafe AX741 10 Gigabit Ethernet –
XFP Adapter

ProSafe AX742 24 Gigabit Stackable –
Modul

ProSafe AXM751 10GBASE-SR –
XFP GBIC

ProSafe AXM752 10GBASE-LR –

XFP GBIC

Warranty•

NETGEAR Lifetime Warranty –

Package Contents

ProSafe Gigabit L3 Managed Switch –
(GSM7328S, GSM7328FS or
GSM7352S)

Null modem cable –
Rubber footpads –
Power cable –
Rack-mount kit –
Installation Guide –
Resource CD-ROM –
Warranty/Support information card –

Ordering Information

North America•

GSM7328SNA –
GSM7328FS-100NAS –
GSM7352SNA –

Europe•

GSM7328SEU –
GSM7328FS-100EUS –
GSM7352S –

Asia•

GSM7328SAU –
GSM7328FS-100AUS –
GSM7352SAU –

Japan•

GSM7328SJP –
GSM7328FS-100JPS –
GSM7352SJP –

Modules•

AGM731F –
AGM732F –
AGM733 –
AX741 –
AX742 –
AXM751 –
AXM752 –

ProSupport Service Packs
Available

GSM7328FS & GSM7328S

OnCall 24x7, Category 3 •

PMB0333 –

XPressHW, Category 3 •

†

PRR0333-100 –

GSM7352S

OnCall 24x7, Category 4 •

PMB0334 –

XPressHW, Category 4 •

PRR0334-100 –

350 E. Plumeria Drive
San Jose, CA 95134-1911 USA

1-888-NETGEAR (638-4327)
E-mail: [e-mail]
www.NETGEAR.com

© 2008 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, NETGEAR Digital Entertainer Logo, Connect with Innovation, FrontView, IntelliFi,
PowerShift, ProSafe, RAIDar, RAIDiator, X-RAID, RangeMax, ReadyNAS and Smart Wizard are trademarks of NETGEAR, Inc. in the United
States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their
respective holder (s) . Information is subject to change without notice. All rights reserved.

*Free basic installation support provided for 90 days from date of purchase. Advanced product features and configurations are not included
in free basic installation support; optional premium support available.

†

Lifetime warranty for product purchased after 05/01/2007. For product purchased before 05/01/2007, warranty is limited lifetime.

D-GSM7328S/GSM7328FS/GSM7352S-3