ProSafe® 12-port and 24-port Gigabit
L2+ Managed Switches with PoE+ Data Sheet
GSM5212P, GSM7212F, GSM7212P, GSM7224P
The NETGEAR® ProSafe® “Intelligent Edge” Gigabit L2+ Managed Switches consist of four switches with PoE+ connectivity, delivering a
secure and flexible access layer in campus environments, warehouses and commercial buildings for convergence: Wireless access points,
IP telephony, CCTV and video-surveillance.
Intelligent Edge
Combining superior resiliency and advanced security even far from the wiring closet, GSM5212P, GSM7212F, GSM7212P, and GSM7224P
provide comprehensive Layer 2 and Lite Layer 3 switching, including 16K MAC table size, 64 routing interfaces and 16 static routes.
Unified Communications – Voice over IP
The NETGEAR ProSafe “Intelligent Edge” simplifies converged data deployments with state-of-the-art capabilities. CoS Layer 2
prioritization and DiffServ Layer 3 & 4 policies allow for 1Kbps ingress and egress TCP/UDP granularity. LLDP-MED (Media Endpoint
Discovery) automatically configures IP phones QoS and VLAN settings.
Unified Communications – Video Streams
IGMP filtering and querier ensure multicast streams are only delivered to interested receivers, preventing flooding even without a
dedicated multicast router. When receivers are in different VLANs, Multicast VLAN registration (MVR) uses a dedicated multicast VLAN
to forward multicast streams and avoid duplication for clients in different VLANs.
Outstanding Value
With its high-value price point, industry-standard command line interface (CLI) and single-pane-of-glass NMS200 management platform
(mass-configuration support), NETGEAR ProSafe “Intelligent Edge” yields a high return on investment. All four switches are backed by the
NETGEAR ProSafe Lifetime Hardware Warranty
Onsite Hardware Replacement.**
+
, ProSupport Lifetime 24x7 Advanced Technical Support*, and 3-Year Next Business Day
Low Acoustics
ModelsForm Factor
(Min <25°C – Max >40°C)
Variable Speed Fans
GSM5212PDesktop
GSM7212FRack mountMin 30dB – Max 48dB12124 first ports: PoE+ out150W
GSM7212PRack mountMin 35.8dB – Max 50.3dB12412 ports PoE+ out380W
GSM7224PRack mountMin 33.8dB – Max 49.9dB24424 ports PoE+ out380W
Below typical acoustic office ambient:
Min 19.8dB – Max 35.1dB
Gigabit RJ45
10/100/1000
124
Shared
SFP
100/1000
PoE+
Port Count
2 first ports: PoE+ in
10 other ports: PoE+ out
PoE+
Budget
22W (Pass-Through)
125W (Power Supply)
24/7
T E C H N I C A L
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: info@NETGEAR.com
- 1 -
ProSafe® 12- and 24-port Gigabit L2+ Managed Switches with PoE+ GSM5212P, GSM7212F, GSM7212P, GSM7224P
PROS
GSM5212P at a Glance
GSM5212P
SPD/Link/ACT
AFE
SFP SPD/Link/ACT mode:
Green = Link at 1G
Yellow = Link at 100M
Blink = ACT
USB DB9
Console(USB)
115200,N,8,1
USB/DB9
Console
Switch Selector
12 Gigabit Ports (RJ45)
2 PoE+ ports (PD – in)
10 PoE+ ports (PSE – out)
4 Combo SFP Ports
1
Power
Fan
PD
MaxPoE
2
Reset
3
4
Storage F/W, Conf., Logs
K
USB
USB Port
PoE (Max 30W per port):
Off = No PD
Green = PoE Powered
Yellow = PoE Fault
PoE-PD (Port 1,2):
Off = No PSE
Green = PSE 30w
Yellow = PSE 15.4w
RJ45 SPD/Link/ACT mode:
Green = 1G
Yellow = 10/100M
Blink = ACT
SPD/Link/ACT
PoE
13579T 10T864211T 12T11F 12F9F 10F
2
1
3
4
Mini-USB RS232
Console Port
Kensington
Lock Slot
Console 115200,N,8,1
DB9 RS232
Console Port
100-240V ~ 50-60Hz, 2.5A max.
Power Supply
For Optional Use
PoE Pass-Through mode: powered by PoE
GSM5212P can draw power from the wiring closet when the aggregation switch delivers PoE power – more flexibility in
challenging environments without outlet.
Simultaneously, GSM5212P is capable of powering PoE devices such as VoIP phones or other devices – redistributing PoE budget
from the upstream switch such as GSM7212F, GSM7212P or GSM7224P.
The two first Gigabit ports are PoE/PoE+ input ports. The ten other Gigabit ports (Port 3 through 12) are standard PoE/PoE+
output ports.
Placement outside the wiring closet
For secure deployment in open areas (conference rooms, offices, class rooms, sales floor in retail stores, etc…), GSM5212P
comes with a Wall Mount Kit with four brackets. As an option, a Rack Mount Kit is orderable.
On or underneath shelves On the wall
Powering Options PoE Input for PD PortsFunctionalityPoE Budget (output) for PSE Ports
PoE Pass-Through
(No AC Power)
AC Power
(Power Supply)
PD Port 1: 15.4W input
PD Port 1: 30W input
PD Port 1:15.4W input
PD Port 2:15.4W input
PD Port 1: 30W input
PD Port 2:15.4W input
PD Port 1: 30W input
PD Port 2: 30W input
-
• Low-power mode
• SFP ports, fans, USB ports not operational
• High-power mode
• All functions operational
• Low-power mode
• SFP ports, fans, USB ports not operational
• High-power mode
• All functions operational
• High-power mode
• All functions operational
• High-power mode
• All functions operational
- 2 -
-
-
Up to 13W
Port 3 through 12
Up to 13W
Port 3 through 12
Up to 22W
Port 3 through 12
Up to 125W
Port 3 through 12
ProSafe® 12- and 24-port Gigabit L2+ Managed Switches with PoE+ GSM5212P, GSM7212F, GSM7212P, GSM7224P