NETGEAR, the NETGEAR logo, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.
Microsoft, Windows, and Wi ndows NT are registered trademarks of Microsoft Corporation. Other brand and product
names are registered trademarks or trademarks of their respective holders. Portions of this document are copyright
Intoto, Inc.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Certificate of the Manufacturer/Importer
It is hereby certified that the GS700TR Series Smart Switch has been suppressed in accordance with the conditions set
out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test
transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes
in the operating instructions.
The Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and
has been granted the right to test the series for compliance with the regulations.
Product and Publication Details
Model Number:GS700TR
Publication Date:December 2007
Product Family:Smart Switch
Product Name:GS700TR Series Smart Switch
Home or Business Product:Business
Language:English
Publication Part Number:202-10304-01
Publication Version Number:1.0
ii
v1.0, December 2007
Contents
GS700TR Series Hardware Installation Guide
About This Manual
Conventions, Formats and Scope .....................................................................................v
How to Use This Manual .................................................................................................. vi
How to Print this Manual ................................................................................................... vi
The NETGEAR® GS700TR Series Hardware Installation Guide describes how to install,
configure and troubleshoot the GS700TR Series Smart Switch. The information in this manual is
intended for readers with intermediate computer and Internet skills.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
•Typographical Conventions. This manual uses the following typographical conventions:
ItalicEmphasis, books, CDs, file and server names, extensions
BoldUser input, IP addresses, GUI screen text
FixedCommand prompt, CLI text, code
italicURL links
•Formats. This manual uses the following formats to highlight special messages:
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
v1.0, December 2007
v
GS700TR Series Hardware Installation Guide
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
•Scope. This manual is written for the GS700TR Series Smart Switch according to these
specifications:
Product VersionGS700TR Series Smart Switch
Manual Publication DateDecember 2007
Note: Product updates are available on the NETGEAR, Inc. website at
http://kbserver.netgear.com/main.asp.
How to Use This Manual
The HTML version of this manual includes the following:
•Buttons, and , for browsing forwards or backwards through the manual one page
at a time
•A button that displays the table of contents and an button. Double-click on a
link in the table of contents or index to navigate directly to where the topic is described in the
manual.
•A button to access the full NETGEAR, Inc. online knowledge base for the product
model.
•Links to PDF versions of the full manual and individual chapters.
How to Print this Manual
To print this manual you can choose one of the following several options, according to your needs.
•Printing a Page in the HTML View. Each page in the HTML version of the manual is
dedicated to a major topic. Use the Print button on the browser toolbar to print the page
contents.
•Printing a Chapter. Use the PDF of This Chapter link at the top left of any page.
viAbout This Manual
v1.0, December 2007
GS700TR Series Hardware Installation Guide
–Click the PDF of This Chapter link at the top right of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
–Your computer must have the free Adobe Acrobat reader installed in order to view and
print PDF files. The Acrobat reader is available on the Adobe Web site at
http://www.adobe.com.
–Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
•Printing the Full Manual. Use the Complete PDF Manual link at the top left of any page.
–Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
–Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
Revision History
Part Number
202-10304-011.0December 2007 Initial release
About This Manualvii
Version
Number
DateDescription
v1.0, December 2007
GS700TR Series Hardware Installation Guide
viiiAbout This Manual
v1.0, December 2007
Chapter 1
Introduction
Congratulations on the purchase of the NETGEAR Smart Switch. The NE TGEAR Smart Switch is
a state-of-the-art, high-performance, IEEE-compliant network solution designed for users who
require a large number of ports and want the power of Gigabit connectivity to eliminate
bottlenecks, boost performance, and increase productivity. To simplify installation, the switch is
shipped ready for use out of the box.
This chapter serves as an introduction to the GS700TR Series Smart Switch and provides the
following information:
•Overview
•Features
•Package Contents
Overview
This Installation Guide is for the following NETGEAR Smart Switches:
•GS724TR – This product offers support for 24 ports of 10 /100/1000 and two Form-factor slots
which support 1000 (1000Base-SX/LX)/100M SFP.
•GS748TR – This product offers support for 48 ports of 10/100/1000 and four Form-factor
slots which support 1000 (1000Base-SX/LX)/100M SFP.
Using Gigabit ports, high-speed connections can be made to a server or network backbone. For
example:
•Linking to high-speed servers
•Providing 10/100/1000 copper and fiber connectivity
The GS700TR Series Smart Switch also provides the benefit of administrative management with a
complete package of features for the observation, configuration, and control of the network. With a
W eb-based Graphical User Interface (GUI), the switch’s many capabilities can be viewed and used
in a simple and intuitive manner. The switch’s management features include configuration for port
and switch information, VLAN for traffic control, port trunking for increased bandwidth, and
1-1
v1.0, December 2007
GS700TR Series Hardware Installation Guide
Class of Service (CoS) for traffic prioritization. These features provide better understanding and
control of the network. Initial discovery of the switch on the network requires the Smart Wi zard
Discovery program, a utility that runs on a PC.
The GS700TR Series Smart Switch can be free-standing, or rack mounted in a wiring closet or
equipment room. It is IEEE-compliant and offers low latency for high-speed networking. All ports
can automatically negotiate to the highest speed. This capability makes the switch ideal for
environments that have a mix of Ethernet, Fast Ethernet, or Gigabit Ethernet devices. In addition,
all RJ-45 ports operate in half- or full-duplex mode. The maximum segment length is 328 feet (100
meters) over Category 5 Unshielded Twisted-Pair (UTP) cable, but much longer for fiber
connections using SFP GBIC modules.
Features
The following list identifies the key features of the NETGEAR Smart Switch.
•24/48 RJ-45 10/100/1000M auto sensing Giga switching ports.
•2/4 Small Form-factor Pluggable (SFP) GBIC slots which function as combo ports. Combo
ports are single ports with two physical connections, SFP fiber and RJ-45 copper. The RJ-45
copper ports corresponding to the Combo ports are the last four 10/100/1000M auto sensing
Giga switching ports on each device. If both devices are plugged in, the fiber connection is
active, with fiber port taking priority if both are connected. The following SFP types are
supported:
•1000Base-SX
•1000Base-LX
•100Base-FX
•The devices support full Netgear Smart Switch functionality.
•The devices provide full compatibility with IEEE standards:
•IEEE 802.3i, (10BASE-T)
•IEEE 802.3u (100BASE-TX, 100BASE-FX)
•IEEE 802.3x (Full-duplex flow control)
•IEEE 802.3ab (1000BASE-T)
•IEEE 802.3z (1000BASE-X)
•Auto-sensing and auto-negotiating capabilities for all ports.
1-2Introduction
v1.0, December 2007
GS700TR Series Hardware Installation Guide
•Auto Uplink™ on all ports to make the right connection.
•Automatic address learning function to build the packet-forwarding information table. The
table contains up to 4K Media Access Control (MAC) addresses.
•Full- and Half-duplex functions for all 10/100/1000 Mbps ports.
•Store-and-Forward transmission to remove bad packets from the network.
•Active flow control to minimize packet loss/frame drops.
•Half-duplex back-pressure control.
•Per port LEDs, System LEDs.
•Standard 1U high, rack mountable 17” chassis.
•Fan speed control supported.
Package Contents
Figure 1-1 shows the package contents of the NETGEAR GS700TR Series Smart Switch.
Figure 1-1
Verify that the package contains the following:
•NETGEAR Smart Switch
Introduction1-3
v1.0, December 2007
GS700TR Series Hardware Installation Guide
•Rubber footpads for tabletop installation
•Power cord
•Rack-mount kit for installing the switch in a 19-inch rack
•Installation guide
•Smart Switch Resource CD with Smart Wizard Discovery and User’s manual
•Warranty/Support Information Card
If any item is missing or damaged, contact the place of purchase immediatel y.
1-4Introduction
v1.0, December 2007
Chapter 2
Physical Description
This chapter describes the NETGEAR Smart Switch hardware features. Topics include:
•GS724TR Front and Back Panel Configuration
•GS748TR Front and Back Panel Configuration
•LED Designations
•Device Hardware Interfaces
GS724TR Front and Back Panel Configuration
The GS724TR is a 24-Port 10/100/1000M + 2 SFP Combo ports Smart Switch with Static
Routing. Every RJ45 port is capable of sensing the line speed and negotiati ng the operation duplex
mode with the link partner automatically
Figure 2-1 illustrates the NETGEAR GS724TR Smart Switch front panel:
System LEDs
10/100/1000M Ethernet Ports
Figure 2-1
The front panel contains the following:
•24 RJ-45 connectors for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports.
•Two SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP.
•Reset button to restart the device.
•Recessed default reset button to restore the device back to the factory defaults.
•Port LEDS
v1.0, December 2007
Port LEDs
SFP Ports
2-5
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.