NETGEAR GS608v3 User Manual

GS608v3_IG_23sept2012.fm Page 1 Sunday, September 23, 2012 6:15 PM

8-Port Gigabit Ethernet Switch GS608v3

Installation Guide

Step 3. Connect power

Step 1. Position switch

Step 2. Connect equipment

Computer Server

GS608v3

Optional router

Internet

Optional modem

Step 4. Check status

Power LED

Off

Port LEDs

1000 Mbps link

10 /100 Mbps link

Activity (blinking)

No link (off)

September 2012

This symbol appears in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE directive). If you dispose of this product in the European Union, treat and recycle it in accordance with your jurisdiction’s laws that implement the WEEE directive.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders. © NETGEAR, Inc. All rights reserved.

For indoor use only in all EU countries and Switzerland.

For the complete EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

Specifications

Specification Description

Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T

Network cable Category 5e (Cat 5e) or better Ethernet cable

Ports 8

Power adapter 12V @ 1.0A DC input

Power consumption 4W max

Weight 0.35 Kg (0.77 lbs)

Dimensions (W x D x H)

177 mm x 117 mm x 31mm

4.6 in. x 7 in. x 1.2 in.

Operating temperature

0–40° C (32–104° F)

Operating humidity 10%–90% relative humidity, noncondensing

Electromagnetic compliance

CE Class B, FCC Class B, VCCI Class B, C-Tick Class B, KC B

Safety agency approvals

CE mark, KC

Technical Support

After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR web site. For product updates and web support, visit http://support.netgear.com.

GS608v3_IG_23sept2012.fm Page 2 Sunday, September 23, 2012 6:15 PM