4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
©2004 NETGEAR, Inc. NETGEAR
®
, the
Netgear Logo, ProSafe, and Everybody’s
connecting are trademarks or registered
trademark of Netgear, Inc. in the United
States and/or other countries. Microsoft,
Windows, and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United
States and/or other countries. Other
brand and product names are trademarks
or registered trademarks of their respective
holders. Information is subject to change
without notice. All rights reserved.
* Free basic installation support provided
for 90 days from date of purchase.
Advanced product features and
configurations are not included in free
basic installation support; optional
premium support available.
D-FM114P-1
Technical Specifications
• Physical Interfaces:
- LAN port: four (4) 10/100 Mbps auto-sensing,
Auto Uplink
™
RJ-45 ports (one Cat 5 UTP
cable included)
- WAN ports: 10/100BASE-T Ethernet RJ-45 port
to connect to any broadband modem, such as DSL
or cable
• Security Features:
- Firewall: Stateful Packet Inspection (SPI) to prevent
Denial of Service (DoS) attacks (Syn flood, ICMP
flood, UDP flood, "ping of death", IP spoofing,
land attack, tear drop attack, IP address sweep
attack, Win Nuke attack), Intrusion Detection
System (IDS) including logging, reporting and
e-mail alerts, Web URL content filtering
- VPN Functionality: NAT traversal (VPN pass-
through) for IPsec, PPTP and L2TP VPNs
- Mode of Operation: Network Address Translation
(NAT), static routing, unrestricted users per port
- IP Address Assignment: Static IP address assign
ment, internal DHCP server on LAN, DHCP
client on WAN, PPPoE client support.
- Wireless: 40-/64- and 128-bit WEP encryption,
Web configurable
• Management Features:
- Administration interface: Web graphic user interface,
user name and password protected. Smart Wizard
and Install Assistant for basic parameter settings.
Remote management support authenticated through
IP address or IP address range, and password.
- Configuration and upgrades: Upload and down
load configuration settings, field upgradeable flash
memory and DRAM
• Wireless Operating Range
:
- Indoor
@ 11 Mbps 100 ft. (30m)
@ 5.5 Mbps 165 ft. (50m)
@ 2 Mbps 230 ft. (70m)
@ 1 Mbps 300 ft. (91m)
- Outdoor
@ 11 Mbps 500 ft. (152m)
@ 5.5 Mbps 885 ft. (270m)
@ 2 Mbps 1300 ft. (396m)
@ 1 Mbps 1500 ft. (457m)
-
Modulation Technique: Direct Sequence Spread
Spectrum (DSSS)
- Frequency Band: 2.4 GHz
- Certifications: WECA/Wi-Fi certified
• Protocol Support:
- Network: IP routing, TCP/IP, UDP, ICMP, PPPoE
- IP addressing: DHCP (client and server)
- VPN/Security: IPSec, PPTP, L2TP pass-through
- Routing: RIP-1, RIP-2 (Static & Dynamic)
- Printing Methods: Windows PTP (Peer-to-Peer)
over TCP/IP and LPD printing
- Print Server Protocol: TCP/IP
- Printer Connection: Parallel Port (36 pin Centronics,
bi-directional IEEE 1284 compliant, supports
Nibble mode) with up to 1.5 Mbps transfer rate
• Warranty:
- NETGEAR 3-year warranty
• User Support:
- Wireless LAN: Up to 32 users
- Wired LAN: Up to 253 users (less number of
wireless users)
• RFC Support:
PPTP client and server (RFC 2637)
IPSec tunnel mode (RFC 2401)
(pass through mode), IP v4
DHCP server (RFC 2131)
DHCP client (RFC 2131)
TFTP client (RFC 1350)
IP routing (RIP1, RIP2) (RFC 2453)
NAT (many-to-one) (RFC 1631)
Compression Control Protocol (RFC 1974)
IP control Protocol (RFC 1332)
PPPoE (RFC 2516)
• Functions:
Smart Wizard to automatically detect ISP Address
type (static, dynamic, PPPoE), Port Range
Forwarding, Exposed Host (DMZ), Enable/Disable
WAN Ping, DNS Proxy, MAC Address Cloning,
NTP support, URL Content Filtering, E-mail Alerts,
DHCP Server (Info and display table), PPPoE login
client support, WAN DHCP Client, Diagnostic tools
(ping, trace route, other)
• Maintenance:
Save/Restore Configuration, Restore Defaults,
Upgrades via Web Browser, Display Statistics,
Logging
• Hardware Specifications:
- Processor: ADMtek 5106, 75MHz
- Memory: 1Mb Flash, 4 Mb DRAM
- Power Adapter: 12V DC, 0.8A. Plug is localized to
country of sale
- Dimensions: H: 1.25" (3.2 cm), W: 7.4" (18.75cm),
D: 4.9" (12.4 cm)
- Weight: 1.8 lb (.82 kg)
• Environmental Specifications:
- Operating temperature: 0 to 40°C (32° to 140°F)
- Operating humidity: 90% maximum relative
humidity, noncondensing
Package Contents
- FM114P ProSafe 802.11b Wireless
Firewall/Print Server
- Power adapter
- 10 ft. (3.05 m) Ethernet cable
- Installation guide
- Resource CD
- Warranty/Support information card
NETGEAR Related Products
- MA521 802.11b Wireless PC Card
- MA111 802.11b Wireless USB
Adapter
- MA701 802.11b Wireless Compact
Flash Card
- FA311 Fast Ethernet PCI Adapter
- FA511 Fast Ethernet Adapter for
notebooks
System Requirements
- Cable, DSL, Satellite or Wireless
Broadband modem and Internet
service
- Ethernet connectivity from
Broadband modem
- Network card for each connected
PC
- Network Software (e.g. Windows)
- Internet Explorer 4.0 or higher OR
Netscape Navigator 4.0 or higher
- TCP/IP Networking software
(Windows
®
95, 98, Me, NT,
2000, XP, NetWare,
®
UNIX,
®
Linux,®Macintosh)
- Windows 95, 98, Me, 2000, or XP
for Print Server
FM114P ProSafe 802.11b Wireless Firewall with Print Server