NETGEAR C6230 User Manual

0 (0)

LED		Description
WPS button		This button lets you use WPS to join the WiFi network without typing the
with LED		WiFi password. The WPS LED blinks during this process and then lights solid.

WiFi On/Off		Pressing this button for two seconds turns the WiFi radios in the modem
button with		router on and off. If this LED is lit, the WiFi radios are on. If this LED is off, the
LED		WiFi radios are turned off and you cannot use WiFi to connect to the modem
		router.

Power		• Green. Power is supplied to the modem router.
		• Red. Power is cut off due to a thermal error caused by heat. Move the

		unit to a well ventilated area and power cycle the unit.
		• Off. No power is supplied to the modem router.

Downstream		• Solid green. One or more downstream channels are locked.
		• Blinking green. The modem router is scanning for a downstream
		channel.
		• Off. No downstream channel is locked.

Upstream		• Solid green. One or more upstream channels are locked.
		• Blinking green. The modem router is scanning for a upstream channel.
		• Off. No upstream channel is locked.

Internet		• Solid green. The modem router is online.
		• Blinking green. The modem router is synchronizing with the cable
		provider’s cable modem termination system (CMTS).
		• Off.The modem router is offline.

2.4 GHz radio		• Solid green. The 2.4 GHz WiFi radio is on.
		• Blinking green. There is WiFi activity on the 2.4 GHz band.
		• Off. The 2.4 GHz WiFi radio is off.

5 GHz radio		• Solid green. The 5 GHz WiFi radio is on.
		• Blinking green. There is WiFi activity on the 5 GHz band.
		• Off. The 5 GHz WiFi radio is off.

Ethernet		• Solid green. A powered-on device is connected to an Ethernet port.
		• Blinking green.The Ethernet port is sending or receiving traffic.
		• Off. No device is connected to an Ethernet port.

USB		• Solid green. A USB device is connected to the port on the back panel.
		• Off. No USB device is connected to the port on the back panel.

Support

Thank you for purchasing this NETGEAR product. You can visit https://www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources.

For regulatory compliance information, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Customer-owned cable modems might not be compatible with certain cable networks. Check with your cable Internet provider to confirm that this NETGEAR cable modem is allowed on your cable network.

If you are experiencing trouble installing your modem router, contact NETGEAR at 1-866-874-8924. If you are experiencing trouble connecting your router, contact the router manufacturer.

Note to CATV system InstallerThis reminder is provided to call the CATV systems installer’s attention to Section 820-93 of the National Electrical Code, which provides guidelines for proper grounding and in particular, specifies that coaxial cable shield shall connected to the grounding system of the building, as close to the point of cable entry as practical

NETGEAR, Inc.	NETGEAR INTERNATIONAL LTD
350 East Plumeria Drive	Floor 1, Building 3
San Jose, CA 95134, USA	University Technology Centre
	Curraheen Road, Cork,
	T12EF21, Ireland

Quick Start

AC1200 WiFi Cable Modem Router

Model C6230

Download the Nighthawk app to get started

For more information about the Nighthawk app, visit Nighthawk-app.com.

Set up your modem router and activate your Internet service with the Nighthawk app.

If you don’t want to use the Nighthwaki app, set up your modem router using the instructions in Set up using the router web interface, and activate your Internet service using the instructions in Activate Your Internet Service.

+ 1 hidden pages