NETGEAR 724TP, GS748TP-100NAS, GS724TPS-100NAS User Manual 2
GS700TP (724TP, 748TP)
Series Hardware
Installation Guide
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
202-10335-01
November 2007
© 2007 by NETGEAR, Inc. All rights reserved. FullManual.
Technical Support
Please refer to the support information card that shipped with your product. By registering your product at
http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product
and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
E-mail: support@netgear.com
North American NETGEAR website: http://www.netgear.com
Trademarks
NETGEAR, the NETGEAR logo, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.
Microsoft, Windows, and Wi ndow s NT are registered trademar ks of Microsoft Corporation.
Other brand and product names are registered trademarks or trademarks of their respective holders. Portions of this
document are copyright Intoto, Inc.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Certificate of the Manufacturer/Importer
It is hereby certified that the GS700TP Smart Switch has been suppressed in accordance with the conditions set out in
the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in
accordance with the regulations may, however , be subject to certain restricti ons. Please refer to the notes in the operating
instructions.
The Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
Bestätigung des Herstellers/Importeurs
Es wird hiermit bestätigt, daß das Smart Switch gemäß der im BMPT-AmtsblVfg 243/1991 und Vfg 46/1992
aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte (z.B. Testsender) kann jedoch
gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.
ii
v1.0, November 2007
Voluntary Control Council for Interference (VCCI) Statement
This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing
Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used
near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling.
Regulatory Compliance Information
This section includes user requirements for operating this product in accordance with National laws for usage of radio
spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result
in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country.
Therefore, all options described in this user's guide may not be available in your version of the product.
Europe – EU Declaration of Conformity
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the
following EU Council Directives: 89/336/EEC and LVD 73/23/EEC. Compliance is verified by testing to the following
standards: EN55022 Class A, EN55024 and EN60950-1.
FCC Requirements for Operation in the United States
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antenn as only. Any
product changes or modifications will invalidate all applicable regulatory certifications and approvals
FCC Guidelines for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Declaration Of Conformity
We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that
the model
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
GS700TP Smart Switch with Gigabit Ports complies with Part 15 of FCC Rules. Operation is subject
FCC Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide rea sonable protection against harmful interference in a residential
installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
v1.0, November 2007
iii
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following methods:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
GS700TP Smart Switch with Gigabit Ports
Tested to Comply
with FCC Standards
FOR HOME OR OFFICE USE
Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate
the equipment.
D
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (GS700TP Smart Switch with Gigabit Ports) does not exceed the Class B limits for
radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Product and Publication Details
Model Number: GS700TP
Publication Date: November 2007
Product Family: Smart Switch
Product Name: GS700TP Smart Switch
Home or Business Product: Business
Language: English
Publication Part Number: 202-10335-01
Publication Version Number: 1.0
iv
v1.0, November 2007
Contents
About This Guide
Conventions, Formats and Scope .................................................................................... ix
How to Use This Manual ...................................................................................................x
How to Print this Manual ....................................................................................................x
Revision History ..................... ... ... .... ... ... ... .......................................... .............................. xi
Chapter 1
Introduction
Overview ................................... ................ ................ ................. ................ ................ ...1-13
Switch Features ............................... ... .......................................... ................................1-15
Package Contents ........................................................................................................1-17
Chapter 2
Installation
Step 1: Preparing the Site .............................................................................................2-29
Step 2: Installing the Switch ..........................................................................................2-30
Installing the Switch on a Flat Surface ...................................................................2-30
Installing the Switch in a Rack ...............................................................................2-30
Step 3: Checking the Installation ..................................................................................2-31
Step 4: Connecting Devices to the Switch ....................................................................2-32
Step 5: Installing an SFP GBIC Module ........................................................................2-32
Step 6: Applying AC Power ..........................................................................................2-33
Step 7: Managing the Switch through a Web Browser or the PC Utility for Initial
Configuration ................................................................................................................ 2-34
Chapter 3
Physical Description
Front and Back Panel Configuration .............................................................................3-19
GS724TP Front and Back Panels Configuration .................... ...... ....... ...... ....... ......3-19
GS748TP Front and Back Panels Configuration .................... ...... ....... ...... ....... ......3-20
LED Designations .........................................................................................................3-21
Port LEDs . .... ... ... ... ... .... ... ....................................... ... ... ... .... ... ... ... ..........................3-21
v1.0, November 2007
v
System LEDs ..................... ... .... ... ... ... ....................................... ... .... ... ... ... ... .... ... ...3-22
Device Hardware Interfaces .........................................................................................3-23
RJ-45 Ports ............................................................................................................3-23
SFP GBIC Module ..................................... ... .......................................... ................3-24
Factory Defaults Button .......................... ... ... ... ... .... ... .......................................... ...3-24
Appendix A
Troubleshooting
Troubleshooting Chart ................................................................................................... A-1
Additional Troubleshooting Suggestions ......... ... ... ... .... ... ... ... .... ... ... .............................. A-2
Network Adapter Cards ........................................................................................... A-2
Configuration ................................... .................................... ................................... . A-2
Switch Integrity ... ... ... .......................................... .......................................... ........... A-2
Auto-negotiation .............................. ............................................................. ...........A -3
Appendix B
Technical Specifications
Network Protocol and Standards Compatibility ....................................................... B-1
Management ........................................................................................................... B-1
Interface .................................................................................................................. B-1
LEDs ....................................................................................................................... B-1
Performance Specifications ....................................................... ... .... ... ... ... .............. B-1
Power Supply .......................................................................................................... B-2
Physical Specifications ............................................................................................ B-2
Environmental Specifications .................................................................................. B-2
Electromagnetic Emissions ..................................................................................... B-2
Electromagnetic Immunity ....................................................................................... B-2
Safety ................................. .......................................................... ........................... B-2
Modules ..................................... ... ... ....................................... ... ... .... ... ... ... ... .... ....... B-3
vi Contents
v1.0, November 2007
About This Guide
Congratulations on the purchase of the NETGEAR Smart Switch. The NETGEAR® GS700TP
Installation Manual describes how to install, configure and troubleshoot the smart switch. The
information in this manual is intended for readers with intermediate computer and Internet skills.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
• Typographical Conventions. This manual uses the following typographical conventions:
Italics Books, CDs, URL names
Bold User input
Fixed Screen text, file and server names, extensions, commands, IP addresses
• Formats. This manual uses the following formats to highlight special messages:
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
v1.0, November 2007
ix
GS700TP Hardware Installation Guide
• Scope. This manual is written for the GS700TP according to these specifications:
Product Version GS700TP Smart Switch
Manual Publication Date November 2007
Note: Product updates are available on the NETGEAR, Inc. web site at
http://kbserver.netgear.com/main.asp.
How to Use This Manual
The HTML version of this manual includes the following:
• Buttons, and , for browsing forwards or backwards through the manual one page
at a time.
• The button displays the table of contents and the button. Double-click on a link
in the table of contents or index to navigate directly to where the topic is described in the
manual.
• The button accesses the full NETGEAR, Inc. online knowledge base for a particular
product model.
• Links to PDF versions of the full manual and individual chapters.
How to Print this Manual
To print this manual you can select one of the following options, according to your requirements.
• Printing a Page in the HTML View - Each page in the HTML version of the manual is
dedicated to a major topic. Use the Print button on the browser toolbar to print the page
contents.
• Printing a Chapter - Use the PDF of This Chapter link at the top left of any page.
– Click the PDF of This Chapter link at the top right of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
– Your computer must have the free Adobe Acrobat reader installed in order to view and
print PDF files. The Acrobat reader is available on the Adobe Web site at
http://www.adobe.com.
x About This Guide
v1.0, November 2007
GS700TP Hardware Installation Guide
– Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
• Printing the Full Manual - Use the Complete PDF Manual link at the top left of any page.
– Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
– Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
Revision History
Part Number
202-10335-01 1.0 November 2007 Product update
About This Guide xi
Version
Number
Date Description
v1.0, November 2007
Chapter 1
Introduction
The NETGEAR Smart Switch is a state-of-the-art, high-performance, IEEE-compliant network
solution designed for users who require a large number of ports and want the power of Gigabit
connectivity to eliminate bottlenecks, boost performance, and increase productivity. To simplify
installation, the switch is shipped ready for use out of the box.
This chapter serves as an introduction to the GS700TP Smart Switch and provides the following
information:
• Overview
• Switch Features
• Package Contents
Overview
This Installation Guide is for the following NETGEAR Smart Switches:
• GS724TP - This product offers support for 24 ports of 10 /100/100 0 and two Form- factor slots
which support 1000 (1000Base-SX/LX)/100M SFP. This product supports the added feature of
Power over Ethernet (PoE).
• GS748TP - This product offers support for 48 ports of 10 /100/1000 and four Fo rm-factor slots
which support 1000 (1000Base-SX/LX)/100M SFP. This product supports the added feature of
Power over Ethernet (PoE).
You can make high-speed connections using the Gigabit ports. For example:
• Connecting to a network backbone
• Linking to high-speed servers
• Providing 10/100/1000 copper and fiber connectivity
GS700TP Smart Switch also provides the benefit of administrative management with a complete
The
package of features for the observation, configuration, and control of the network. With a Webbased Graphical User Interface (GUI), you can view the switch’s many features and use them in a
simple and intuitive manner. The switch’s management features include configuration for port and
1-13
v1.0, November 2007
GS700TP Hardware Installation Guide
switch information, VLAN for traffic control, port trunking for increased bandwidth, and Class of
Service (CoS) for traffic prioritization. These features provide better understandi ng and co ntro l of
the network. Initial discovery of the switch on the network requires the SmartWizard Discovery
program, a utility that runs on a PC.
The
GS700TP Smart Switch can be free-standing, or rack mounted in a wiring closet or equipment
room. It is IEEE-compliant and offers low latency for high-speed networking. All ports can
automatically negotiate to the highest speed. This capability makes the switch ideal for
environments that have a mix of Ethernet, Fast Ethernet, or Gigabit Ethernet devices. In addition,
all RJ-45 ports operate in half- or full-duplex mode. The maximum segment length is 328 feet (100
meters) over Category 5 Unshielded Twisted-Pair (UTP) cable, but much longer for fiber
connections using SFP GBIC modules.
The NETGEAR Smart Switch can be used as a desktop to build a small network that enables you
to have 1000 Mbps access to a file server. With full-duplex enabled, the switch port connected to
the server or PC can provide 2000 Mbps throughput.
Introduction 1-14
v1.0, November 2007
Loading...