NEC PF-51V21 User Manual

COLOUR TELEVISION

PF-51V21

INSTRUCTIONS

Thank you for your purchasing this NEC colour television.
To ensure your complete understanding, please read this manual thoroughly
before operation.

Contents

1. Specifications ………………….….

2. Important safeguard …………..…

3. Television Installation ………..…..

4. Control Panel ……………….……..

5. Remote Control Hand Unit …..

1 Specification

Television RF system B, G

Colour System PAL, NTSC 3.58/4.43(AV input only)

Channel and frequencies VHF Low channel (VL) =46.25 to 168.25 MHz

VHF high channel (VH) =175.25 to 463.25 MHz

UHF channel U) =471.25 to 863.25 MHz

Power input AC 240V, 50/60 Hz

Power consumption Maximum 115W

Screen size Picture tube 55 cm

(measured diagonally) Visible area 51 cm

Audio output 5 W + 5 W (Rated output)

Speakers (5 cm x 9 cm ) oval x 2

External input/output VIDEO inputs (RCA) at rear and front left

AUDIO L/R inputs (RCA) at rear and front left

S-Video input at rear

VIDEO output (RCA) at rear

AUDIO L/R output (RCA) at rear

Headphone jack: mini jack (dia 3.5mm) at front left

Dimensions (WxHxD) 585 x 520 x 465

Weight 24.1 kg

Accessories Remote control unit: RE-001 x 1 AAA/ R03 /UM-4 dry battery x 2

All specifications are subject to change without notice.

6. Control Your TV ………………… 6

1

7. Tuning Procedure………………

2

8. Menu Operation …..……………

3

9. Trouble Shooting ………………

4
5

. 9

10

13

2

IMPORTANT SAFEGUARDS

Warning:

LOCATION

Place the TV set on a flat, level surface and in a dry area free from dust and moisture. Do not place the unit in direct sunlight, or

where it would be affected by smoke, steam, vibration or heat from heat radiating appliances. To prevent excessive internal

temperature rise, place the unit so that there is at least 15 cm of space between it and the surrounding walls.

FIRE AND SHOCK PRECAUTIONS

 Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free from foreign objects,

 Do not set liquids, including flower vases and vessels filled with chemicals or water etc., on top of the unit as liquid could



WARNING

 Do not remove the back cover of the TV set. Accidental contact with high voltage components could result in electric

 If your set produces sound but no picture, or it emits smoke or produces a strange sound or smell, continued operation

 During vacation or other occasions when you will not be using the set for an extended period, remove the power plug

 This appliance should not be operated by children or infirm persons without adequate supervision.

If a continual DISCOLOURATION or a COLOURED PATCH appears on your picture image, it may be caused by one of the

following..

 External speakers placed near to the TV.

 Vacuum cleaners switched ON or OFF near the TV.

 Moving or rotating the position of the TV while it is turned on.

 The TV has been left in the STANDBY mode for some period of time, without being turned OFF using the front panel power

If this happens then…

1. Switch OFF the TV by using the FRONT PANEL POWER button.

Leave the TV switch OFF for at least 20 minutes.

2.

3. Then switch ON the TV using the FRONT PANEL POWER button.

Note: You may need to repeat steps 1, 2 and 3 for the best result.

To prevent fire or shock hazard, do not expose this TV set to rain or moisture.

such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other enclosures in which it would be poorly

ventilated. Do not place it on carpet or a bed as low ventilation holes could become obstructed.

get inside the unit. If a hazardous object falls inside the TV set, unplug it immediately and call a qualified technician for

removal.

When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot. To

avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on the

power cord. Keep cord away from heat radiating appliances. Do not allow cord to become knotted or tangled.

Do not lengthen the cord. When removing the power plug from the socket, always hold onto the plug, never

pull by the cord.

shock. When internal adjustment is necessary, please contact your distributor.

is dangerous. Immediately turn off power and remove the power plug from the socket and contact your distributor.

from the socket.

button.

２

3 Television Installation

Connect antenna or video facility

1. Use 75 Ω coaxial cable plug or 300-75 Ω impedance converter to plug in antenna input terminal on the rear

of the cabinet.

2. Connect the video facility to the audio, video in jack on the rear of the cabinet.

Audio out （VCR）

Video out （VCR）

Battery installation and replacement for remote control unit.

The remote control unit uses two 1.5v AAA batteries. For battery installation and replacement see as

follows:

1. Turn the remote control unit upside down. Press

down the grip of the battery compartment and

slide the cover in the direction of the arrow.

2. Install two new batteries, make sure that battery

polarity matches with the (+)(-) marks inside the

compartment, otherwise it would damage the unit.

3. Close the battery compartment cover.

VCR

Antenna in jack

VHF Antenna

UHF Antenna

Mixer

75Ωcoaxial cable

Antenna in jack

75Ωcoaxial cable

３

4

g

p

k

r

Control Panel

Front Controls

Audio 2 (Left) Input

Audio 2 (Right) Input

NOTE:

When plug in to this

earphone jack, sound

from speakers would

not be muted.

Volume conontrol fo

the earphone can be

done independently.

Rear Terminals

Video 2 Input

Earphone jac

S-Video Input

MENU

TV/AV

VOLUME UP/DOWN

CHANNEL UP/DOWN

Audio

L R Video

L(Mono) R Video

Audio Video Output

Audio Video 1 In

MAIN SWITCH:

Push this switch to turn Mains Power On.

Push again to turn Mains Power Off.

Power Indicator: When Mains Power On, this will be lit.

Power ON: GREEN

Power OFF: RED

ON-TIMER set: ORANGE

Remote Control Window:

Receives the remote control si

Antenna In(75Ω)

ut

nal.

４

5

;

(

Remote Control Hand Unit

Please refer indicated pages.

TV/AV Select

Sound Volume Up/Down

Direct Access Numeric

(Ref; P7)

（Ref

P6）

Call

(Ref.P7)

Keys

(Ref.P6)

Surround Sound

Effect

(Ref.P8)

P+

V-

P-

SLEEP

--

-

V+

LOCK

QV

SCAN

- ZOOM

| |

♪

| ♪|

RE-001

Power/Standby

Ref; P6)

MENU

(Ref.P10)

Channel Up/Down

（Ref; P6）

Mute

(Ref.P7)

Child Lock

(Ref.p8)

Quick View

(Ref.p7)

Channel Scan

(Ref.P7)

ZOOM

(Ref.P6)

Picture Effect

(Ref.P8)

Picture MENU

(Ref.P12)

Sound effect

(Ref.P8)

Sound MENU

(Ref.P12)

５