NEC NP-U300X-WK1 Quick Start Manual
NEC Display Solutions of America, Inc.
U300X Installation Guide
Desktop and Ceiling Mount v1.3
Contents
Product Description, Lens Specs, Notes and Formulas Page 1
Diagrams and Distance Charts
Ceiling Mounted Installation Page 2
Desktop Setup Page 3
Cabinet Dimensions
Top, Front and Right Side Page 4
Bottom, Back and Left Side Page 5
Optional Wall Mount Dimensions Page 6, 8
Optional Wall Mount Dimensions cont. Page 7, 9
Input Panel and Control Codes Page 10
Product Description
Type: 1 chip DMDTM Ultra Short Throw projector Dimensions: 16.8”(W) x 7.9”(H) x 16.0”(D)
Weight: 14.3 lbs
Native Resolution: 1024 x 768 (1024x576 for 16:9 screens) Screen Range: 63” – 85” Diagonal (4:3)
Brightness: 3000 lumens Fan Noise: 36 dB / 32dB @ 1 meter
Power Consumption: 360W (max) BTU’s: 1228 BTU/hour
Screen/Aspect Ratio_
Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.
Notes
For screen sizes not indicated on the projection charts, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary 5%.
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug the screen width in for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3.
Definitions: 4:3 Screen Formulas:
W = Screen width W = H x 4/3
H = Screen height H = W x 3/4
A = Distance between projector cabinet and screen Screen Diagonal = W x 5/4
B = Vertical distance between projector foot and screen center
C = Throw distance 16:9 Screen Formulas:
D = Vertical distance between projector foot and screen bottom W = H x 16/9
(screen top for ceiling mounted application) H = W x 9/16
Screen Diagonal = W x 18.868/16
Projection Formulas:
A = C-13.48
B = 0.631W
C = 0.377W
D = 0.256W
www.necdisplay.com U300X Page 1 of 10
Diagonal Width(W) Height(H)
inches inches inches inches inches inches
inches
64 51 38 6 32 19
13
67 54 40 7 34 20
14
72 58 43 8 36 22
15
77 62 46 10 39 23
16
84 67 50 12 42 25
17
D
Image Size (4:3)
ABC
D
B
C
A
55°
NEC Display Solutions of America, Inc.
U300X Installation Guide
Desktop and Ceiling Mount v1.3
Ceiling Mounted Installation
The following diagram shows the relationship between projector position and the screen. Refer to the charts below for data.
Distances are in inches. For millimeters multiply by 25.4.
Distance chart for popular 4:3 screen sizes
Note: For screen sizes not indicated in the distance charts, use the formulas on page 1.
www.necdisplay.com U300X Page 2 of 10
Diagonal Width(W) Height(H)
inches inches inches inches inches inches
inches
64 51 38 6 32 19
13
67 54 40 7 34 20
14
72 58 43 8 36 22
15
77 62 46 10 39 23
16
84 67 50 12 42 25
17
D
Image Size (4:3)
ABC
D
B
55°
A
C
NEC Display Solutions of America, Inc.
U300X Installation Guide
Desktop and Ceiling Mount v1.3
Desktop Setup
The following diagram shows the relationship between projector position and the screen. Refer to the charts below for data.
Distances are in inches. For millimeters multiply by 25.4.
Distance chart for popular 16:9 screen sizes
Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image up and down in the unused portion of
the 4:3 DLP panel. This adjustment is only available when the projector is set for 16:9 in the “Screen” menu.
Note: For screen sizes not indicated in the distance charts, use the formulas on page 1.
www.necdisplay.com U300X Page 3 of 10
Loading...