Nec MULTISYNC LCD1500M User Guide

NEC Technologies, Inc. MultiSync

LCD1500M

™

Setup instructions for Windows® 95/98 & NT Computers

For Optimal Performance

the MultiSync LCD

1500M

1024x768 @ 75Hz.

Once you have booted up your computer and have entered Windows, please follow the instructions below

to fully optimize your MultiSync LCD monitor.

Step 1 Auto Size your MultiSync LCD monitor

To begin the setup/adjustment of the NEC MultiSync LCD1500M monitor,

•

push the Menu button on the front bezel of the monitor to bring up the NEC

Press the right arrow until the words “AUTO SIZE” are displayed at the

•

bottom of the OSD window.

Press the “+” button to initiate the

•

On Screen Display

should be set up for

Auto Size

Function.

LCD1500 12/8/98, 4:36 PM1

Press MENU to close the OSD.

•

(Proceed to Step 2)

see reverse side

Part No.

Printed in Japan

Step 2 Make sure that your computer is set up for 1024x768 resolution.

Open the Display Properties window by following this mouse click sequence (1, 2, 3, 4, & 5) indicated by the numbered arrows below.

On the right side of the Display Properties window there is a box labeled Display

area. Make sure the “Screen” slide bar (6) is set to 1024x768.

You may have to restart your computer for this change to take effect. After the restart, double check the Display Properties/Settings window to make sure you are now at 1024x768.

(Proceed to Step 3.)

Step 3 Repeat Step 1.

This will ensure that the monitor is auto-adjusted to the new resolution.

If you have questions regarding the setup of your MultiSync LCD monitor, please refer to the user’s

LCD1500 12/8/98, 4:41 PM2

manual or contact your NEC Technical Support representative.