NEC ELECTRA ELITE IPK II, ELITE IPK II User Manual

Page 1

NOTICE

Note that when converting this document from its original format to a .pdf file, some minor font and format changes may occur. When viewing and printing this document, we cannot guarantee that your specific PC or printer will support all of the fonts or graphics. Therefore, when you view the document, fonts may be substituted and your individual printer may not have the cap ability to print the document correctly.

Page 2

Page 3

Multiline Telephone

User Guide

Page 4

Page 5

Table of Contents

ELITE IPK TELEPHONES ........................................................1

GENERAL INFORMATION .......................................................3

ANSWERING CALLS ..................................................................4

Ringing Calls ............................ .... ... ... ... .... ... ... ... .... ................................ ... .4

Ringing Calls To A Second Incoming Extension/CAR/VE Key ..................4

Voice Announce Calls ................................................................................4

Camp-on (Call Waiting) ..............................................................................5

Off-Hook Signaling .......................... ................................... ........................5

PLACING CALLS ........................................................................ 5

Internal Calls ............................................................. ... ... ... .... ... ... ... .... ... ....5

Outside Calls ..............................................................................................6

Trunk Queuing ............................................................................................6

Last CO/PBX Number Redial .....................................................................6

Speed Dial - System/Group/Station ...........................................................7

MICROPHONE CONTROL ........................................................9

SPEAKERPHONE CALLS ..........................................................9

GROUP LISTEN .......................................................................... 9

HOLDING CALLS ....................................................................10

Page 6

TRANSFERRING CALLS ........................................................ 10

CONFERENCE .......................................................................... 11

CALL PARK - SYSTEM ............................................................ 12

CALL PARK – STEP CALL ...................................................... 13

STATION BUSY/NO ANSWER OPTIONS .............................. 14

Callback ....................... ............................. .......................... ......................14

Message Waiting ......................................................................................15

Tone Override ..........................................................................................16

Department Step Call ...............................................................................16

Voice Over ................................................................................................17

CO/PBX DIALING OPTIONS .................................................. 18

Save Number Dialed ................................................................................18

Memo Dial ................................................................................................19

Repeat Redial ...........................................................................................20

Caller ID ...................................................................................................21

Answer ........................................................................................................21

Temporary Memory .....................................................................................21

CALL PICKUP ........................................................................... 22

Group Call Pickup ....................................................................................22

Directed Call Pickup .................................................................................23

PAGING ...................................................................................... 23

Meet-Me Answer ......................................................................................24

BACKGROUND MUSIC ........................................................... 25

Page 7

CALL FORWARDING ............................................................... 25

All Calls (CF/A) .........................................................................................25

Call Forward Busy/No Answer (B/NA) ......................................................26

SELECTABLE DISPLAY MESSAGING ..................................28

SET RELOCATION ...................................................................29

CODE RESTRICTION, DIAL BLOCK .....................................29

ACCOUNT CODE ENTRY ........................................................ 30

AUTOMATIC CALL DISTRIBUTION (ACD) .........................32

Agent Log In .............................................................................................32

AIC Agent Log In ... ................................ .... ... ... ... .... ... ... ... ... ......................32

Multiple AIC Agent Log In ............. ... ... ... .... ... ... ................................ .... ... ..33

Rest Mode ............................. ... .... ... ... ... .... ................................ ... ... .... ... ..34

Queue Status Display ............................ .... ...............................................34

Answering a Call Using a Headset .. .........................................................35

Using the Headset with Automatic Answer for ACD Agents ....................35

STATION SPEED DIAL — DIAL ACCESS ............................36

LINE KEYS/PROGRAMMABLE FUNCTION KEYS ............. 37

Function Numbers ....................................................................................38

Character Entry ........................................................................................42

Page 8

THIS PAGE INTENTIONALLY LEFT BLANK

Page 9

ELITE IPK TELEPHONES

1 Speaker 6 Large LED 11 Directory

Key (DIR)

2 Line Keys/

Programmable Function Keys

7 Alphanumeric

3x24 Character LCD Display

12 Message

Key (MSG)

3 Dialpad/Dedicated

Function Keys

8 Hookswitch 13 MIC Key

4 Microphone 9 Headset Jack 5 Volume Control 10 Soft Keys

8-Button Display

16-Button Display

8-Button Non Display

Page 10

1 Spe aker 6 Large LED 11 Directory Key

(DIR)

2 Line Keys/

Programmable Keys

7 Alphanumeric

Display

12 Message Key

(MSG)

3 Dialpad/Dedicated

Function Keys

8 Hookswitch 13 MIC Key

4 Microphone 9 Built-in

Headset Jack

5 Volume Control 10 Softkeys

32-Button Display with 16 DSS/BLF One Touch Keys

16-Button Multiline

Liquid Display

2 (all rows)

Page 11

GENERAL INFORMATION

The following should be considered when reviewing this User Guide:

P All operational instructions assume Prime Line Pickup is assigned to

intercom dial tone, Ringing Line Preference is assigned to all telephones, a Line and Second Incoming Extension key has been assigned to all multiline telephones.

P All access codes listed are standard; some may vary based on system

assignment.

P Access to many features is based on system assignments. Not all

features may be available from your telephone.

P Telephones equipped with displays will provide useful call processing

information such as digits dialed, recall indications, feature confirmation, etc.

Page 12

ANSWERING CALLS

Ringing Calls

1. Lift the handset.

2. Converse.

Note: When assigned the Delayed Ringing feature, incoming calls will

first ring at a primary station. If the call is unanswered after a preprogrammed time interval, calls will also ring at the assigned secondary station.

Ringing Calls To A Second Incoming Extension/CAR/VE Key

1. Lift the handset.

2. Converse.

Note 1: A Second Incoming Extension key must be assigned to

appear and ring.

Note 2: A Line key must be available to answer an incoming outside

call.

Voice Announce Calls

1. Ensure the MIC LED is lit.

2. Adjust the Speaker volume (W or V) as needed.

3. Respond handsfree.

Note: The handset may be used at any time during the conversation.

Page 13

Camp-on (Call Waiting)

Receive camp-on tone while on another call:

1. Replace the handset to disconnect present call.

- OR -

Press Hold and press the Hookswitch to converse with the second party.

Off-Hook Signaling

With a call in progress:

1. Receive Off-Hook Signaling.

2. Press the Answer key, then converse with the second party.

Note 1: The second call may be placed on Hold. Note 2: Press the flashing Line key or Conf key to return to the first

call.

PLACING CALLS

Internal Calls

1. Lift the handset.

2. Dial a station number or 0 for the attendant.

- OR -

Press the Programmable Function Key programmed for Direct Station Select.

3. Voice announce after the tone burst or wait for the ringing call to be answered.

Note 1: When calling a multiline telephone, dialing 1 after the station

number will change ringing to voice or voice to ringing.

Note 2: To directly access a personal voice mailbox, dial 8 after

dialing the station number.

Page 14

Outside Calls

1. Lift the handset.

2. Dial the trunk access code, i.e. 9.

- OR -

Press an idle Outside Line key.

3. Dial the telephone number.

4. Converse.

Trunk Queuing

After pressing a busy Line key and receiving the trunk busy indication:

1. Dial # or press Trunk Queuing/Camp On key (Service Code 751: 35).

2. Replace the handset.

Note: When a line is available, your telephone will ring; lift the

handset and place the call.

Last CO/PBX Number Redial

1. Without lifting the handset, press the Redial key. The last dialed number is displayed.

2. To redial the last number, press #.

- OR -

Search for the desired number from the Redial List by pressing the Redial softkey or Volume Up or Volume Down keys.

3. Lift the handset or press Speaker to place the call.

Page 15

Speed Dial - System/Group/Station

To dial a Station Speed Dialing number:

1. Press the Speaker key.

2. Dial #7 (default Service Code).

Note: To preselect, press a line key in step 1 (instead of Speaker).

3. Dial the Station Speed Dial buffer number (0~9). 1 = Station Speed Dial buffer 1 2 = Station Speed Dial buffer 2 “ “ “ “ “ 0 = Station Speed Dial buffer 10

Note 1: The stored number dials out. Note 2: Unless you preselect, Trunk Group Routing selects the trunk

for the call. The system may optionally select a specific Trunk Group for the call.

Note 3: If you have a DSS Console, you may be able to press a DSS

Console key to chain to a stored number.

To dial a System Speed dialing number:

1. Press the Speaker key.

2. Dial #2 (default Service Code).

- OR -

Press the Redial key.

- OR -

Press the System Speed Dialing key (Service Code 751: 27).

Note: To preselect, press a line key in step 1 (instead of Speaker).

3. Dial the Station Speed Dial buffer number (Default: 000~999). The stored number dials out.

Page 16

Note 1: Initially (at default), there are 1000 System Speed Dial

buffers.

Note 2: Unless you preselect, Trunk Group Routing selects the trunk

for the call. The system may optionally select a specific Trunk Group for the call.

Note 3: If you have a DSS Console, you may be a ble to pr ess a DSS

Console key to chain to a stored number.

To dial a Group Speed Dialing number:

1. Press the Speaker key.

2. Dial #4 (default Service Code).

- OR -

Press the Redial key.

- OR -

Press the Group Speed Dialing key (Service Code 751: 28).

Note: To preselect, press a line key in step 1 (instead of Speaker).

3. Dial the Group Speed Dial buffer number (none at default). The stored number dials out.

Note 1: Initially, there are no Group Speed Dial buffers assigned. Note 2: Unless you preselect, Trunk Group Routing selects the trunk

for the call. The system may optionally select a specific Trunk Group for the call.

Note 3: If you have a DSS Console, you may be a ble to pr ess a DSS

Console key to chain to a stored number.

Page 17

MICROPHONE CONTROL

1. Press the MIC key.

2. A lit MIC LED indicates that the MIC is on.

SPEAKERPHONE CALLS

1. Press the Speaker key and the LED lights.

2. Ensure that the MIC LED is lit.

3. Place internal or outside call.

4. Converse.

5. Press the Speaker key to disconnect call.

Note: The handset may be used at any time during the conversation.

To resume handsfree operation or to monitor a call, press the

Speaker key (the LED lights) and replace the handset.

GROUP LISTEN

To initiate Group Listen:

1. Place or answer call using the handset.

2. Press Speaker twice (but do not hang up).

Note 1: Speaker flashes slowly. Note 2: You can talk to the caller through your handset. Your

co-workers hear your caller’s voice over your telephone’s speaker.

Note 3: When you press Speaker once, you turn yo ur Speakerphone

on. The second press turns on Group Listen. Pressing the Speaker key a third time cancels the Group Listen feature.

Page 18

HOLDING CALLS

Note 1: To retrieve a held call, press the flashing Line key or Conf key

(internal calls).

Note 2: Calls on System Hold can be retrieved from any multiline

telephone with the held line appearance.

Note 3: After a preprogrammed time, the held call will recall to the

originating station.

TRANSFERRING CALLS

Note 1: If the called station is busy, replace the handset to initiate a

camp-on. Unanswered camp-ons and unscreened transfers will recall to the transferring station.

Note 2: To retur n to th e or igin al party, press the flashing Line key or

Conf key.

Note 3: A Programmable Function Key may be assign ed for DSS.

System Hold Exclusive Hold

With a call in progress:

1. Press Hold.

With a call in progress:

1. Press the Exclusive Hold key (Service Code 751: 45).

Using Manual Dial Using Direct Station Selection

(DSS)

With a call in progress:

1. Press the Transfer key.

2. Dial the station number.

3. Announce the call (optional).

4. Replace the handset.

With a call in progress:

1. Press the Transfer key.

2. Press the programmed DSS.

3. Announce the call (optional).

4. Replace the handset.

Page 19

Note 4: To transfer a call directly to a personal voice mailbox, dial 8

after dialing the station n umber.

CONFERENCE

1. Establish intercom or trunk call.

2. Press Conf or Conference key (Service Code 751: 07).

3. Dial the extension you want to add.

- OR -

Access outside call.

Note: To get the outside call, you can either press a line key or dial a

trunk/trunk group access code.

4. When called party answers, press Conference key twice.

Note: If you cannot add additional parties to your Conference, you

have exceeded the system’s Conference limit.

5. Repeat steps 2~4 to add more parties.

Page 20

CALL PARK - SYSTEM

To Park a call in a system orbit:

Note: You can Park Intercom or trunk calls.

1. Press the Park key (Service Code 752: *04 + orbit).

Note: The Park key LED lights.

2. Use Paging to announce call.

3. Press Speaker to hang up.

Note: If not picked up, the call will recall to you.

- OR -

1. Press the Transfer key.

2. Dial #6 and the Park orbit (01~64).

Note: If you hear busy tone, the orbit is busy. Try another orbit.

3. Use Paging to announce call.

4. Press Speaker to hang up.

Note: If not picked up, the call will recall to you.

To pick up a parked call:

1. Lift the handset.

2. Press the Park key (Service Code 752:

04 + orbit).

- OR -

1. Press the Speaker key.

2. Dial

6 and the Park orbit (01~64).

Page 21

CALL PARK – STEP CALL

(Version 2000 or higher software is required)

To Park a call in the first available system orbit:

Note: You can Park Intercom or trunk calls.

1. Press the Hold or Transfer key.

2. Dial #6.

Note: If you hear busy tone, the orbit is busy. Proceed to step 3.

3. Dial

Note: Program 20-11-27 must be enabled in the Multiline Terminal’s

Class of Service.

4. Press Speaker to hang up.

Note: If not picked up, the call will recall to you.

- OR -

Press the Hold or Transfer Key.

2. Press the DSS/BLF key programmed as #6*. (The park location will be displayed in the LCD.)

3. Press Speaker to hang up.

Page 22

STATION BUSY/NO ANSWER OPTIONS

Callback

To place a Callback:

1. Call unavailable (busy or unanswered) extension.

2. Dial # or press Callback key (Service Code 751: 35).

3. Hang up.

4. Lift the handset when the busy extension calls you back.

Note 1: If the unavailable extension was unanswered (not busy), the

Callback goes through after your co-worker uses their telephone for the first time.

Note 2: If you have Callback Automatic Answer, you automatically

place a call to the formerly busy extension when you lift the handset. If you do not have Callback Automatic Answer, you must press the ringing line appearance to place the call.

To cancel a Callback:

1. Press idle Speaker key and dial 770.

- OR -

Press Camp-On key (Service Code 751: 35).

Page 23

Message Waiting

To leave a Message Waiting:

1. Call busy or unanswered extension.

2. Dial 0 or press Message Waiting key (Service Code 751: 38).

3. Hang up.

To answer a Message Waiting:

Note: When you have a message, your MW LED flashes.

1. Press the Speaker key and dial *0.

- OR -

Press the Message Waiting key (Service Code 751: 38).

Note: If the called extension does not answer, dial 0 or press your

Message Waiting key to automatically leave them a message.

To cancel all your Messages Waiting:

Note: This includes messages you have left for other extensions and

messages other extension have left for you.

1. Press the Speaker key.

2. Dial 773.

3. Hang up.

To cancel the Messages Waiting you have left at a specific extension:

1. Press the Speaker key.

2. Dial 771.

3. Dial number of extension you do not want to have your messages.

4. Hang up.

Page 24

Tone Override

To send off-hook signals to an extension busy on a call:

Note: Your extension may send off-hook signals automatically.

1. Dial *.

- OR -

Dial 709.

2. Press the Off-Hook Signaling key (Service Code 751: 33).

Note 1: You hear Ring Busy Tone. Note 2: The called extension hears Call Alert Notification.

To answer Tone Override:

1. Receive Tone Override.

2. Press the Hold key and talk with the party.

Department Step Call

To make a Step Call:

1. Place a call to a busy Department Group member.

- OR -

Place a call to a Department Group pilot number.

2. Dial Department Step Code (2) to call the next available Department Group member.

3. Repeat step 2 to call other Department Group members.

Page 25

Voice Over

To initiate a Voice Over to a busy extension:

1. Press Voice Over key (Service Code 751: 48).

- OR -

Dial 6.

Note: You hear an alert tone and the V oice Over key flashes. You can

talk to the called party after the alert tone ends.

To respond to a Voice Over alert tone to your extension:

Note: You can only respond if you have a Voice Over key.

1. Press the Voice Over key (Service Code 751: 48).

Note: The Voice Over key lights steadily (green) and you can talk to

the interrupting party.

To return to your original call:

1. Press the Voice Over key.

Note 1: Your Voice Over key flashes re d when you are t a lking to your

original call.

Note 2: To switch between your original call and the interrupting party ,

just keep pressing the Voice Over key.

Page 26

CO/PBX DIALING OPTIONS

Save Number Dialed

To save the outside number you just dialed (up to 24 digits):

Note: Use this feature before hanging up.

1. Press the Save Number Dialed key (Service Code 751: 30).

To redial a saved number:

1. Press an idle trunk line key.

Note: This selects a specific trunk for the call.

2. Press the Save Number Dialed key (Service Code 751: 30).

Note: The stored number dials out.

- OR -

1. Press the Speaker key.

2. Dial 715.

Note 1: Save Number Dialed automatically selects a trunk from the

same group as your original call.

Note 2: The stored number dials out.

Page 27

Memo Dial

To store a number while you are on a call:

1. While on a call, press Memo Dial key (Service Code 751: 31).

2. Dial number you want to store.

3. Press Memo Dial key again and continue with conversation.

To call a stored Memo Dial number:

1. Do not lift the handset.

2. Press the Memo Dial key (Service Code 751: 31).

3. Press the Speaker key.

- OR -

Press a configured line key.

Note: The stored number dials out.

To check to see the stored Memo Dial number:

1. Do not lift the handset.

2. Press Memo Dial key (Service Code 751: 31).

Note: The stored number displays.

3. Press Exit to return to the main LCD screen.

To cancel (erase) a stored Memo Dial number:

1. Press the Speaker key.

2. Press the Memo Dial key (Service Code 751: 31).

Page 28

Repeat Redial

To use Repeat Redial (if the outside party you call is unavailable or busy):

1. Place a trunk call.

Note: Listen for busy tone or ring-no-answer.

2. Press the Feature + Redial keys.

- OR -

Press the Repeat Redial key (Service Code 751: 29).

Note: Y o ur Repeat Redial key flashes while you wait for the system to

redial.

3. Press Speaker to hang up.

Note 1: The system periodically redials the call. Note 2: System programming det er m ines the waiting time and the

number of redial attempts.

4. Lift the handset when called party answers.

Note: When using trunks with answer supervision the Repeat Redial

feature will automatically cancel.

To cancel Repeat Redial:

1. Press the Feature key.

2. Press the Redial key.

- OR -

1. Press Repeat Redial Key (Service Code 751: 29).

Page 29

Caller ID

Answer

Receive incoming ringing or transferred outside call:

1. Review the telephone display for the calling party’s name or number.

2. Answer the call accordingly.

Temporary Memory

An unanswered call will cause the Call History key (Service Code 751: 08) to flash, indicating a new call has been placed in the temporary memory. If enabled in programming, the telephone’s display will show “CHECK LIST”.

1. Press the Call History key (Service Code 751: 08) or press the

LIST Softkey and CID.

Note: The last addition to the list is displayed.

2. Press the ARROW DOWN softkey to scroll through the list of numbers in memory.

3. Press the DEL softkey to delete the entry and scroll to the next entry.

4. The Call History key will remain on as long as entries remain in memory.

5. T o place a call back to a number in the temporary memory list, with the number to be dialed displayed, press a line or Speaker key.

Note: The outgoing call is placed.

Page 30

CALL PICKUP

Group Call Pickup

To answer a call ringing another telephone in your Pickup Group:

1. Pick up the handset or press the Speaker key.

2. Press the Group Call Pickup key (Service Code 751: 24).

- OR -

Dial 756 or

Note: Service Code

# can pick up any call in the group, plus any

Ring Group calls. Service Code 756 cannot pick up Ring Group calls.

To answer a call ringing a telephone in another Pickup Group when you do not know the group number:

1. Pick up the handset or press the Speaker key.

2. Press the Group Call Pickup key (Service Code 751: 25).

- OR -

Dial 769.

To answer a call ringing a telephone in another Pickup Group when you know the group number:

1. Pick up the handset or press the Speaker key.

2. Press Group Call Pickup key (Service Code 751: 26 + group).

- OR -

Dial 768 and the group number (01~64).

Page 31

Directed Call Pickup

To use Directed Call Pickup to intercept a call to a co-worker’s extension:

1. Pick up the handset or press the Speaker key.

2. Dial

3. Dial the number of extension whose call you want to intercept.

Note: If more than one call is coming in, the system sets the priority

for which call it will answer first.

PAGING

To make an Internal Page announcement:

1. Press the zone’s Internal Paging key [Service Code 751: 21 01~64 for zones (00 for All Call).

- OR -

1. Press the Speaker key or lift the handset.

2. Dial 701 and the Paging Zone number (0~9 or 00~64).

Note: Dialing 0 or 00 calls All Call Internal Paging.

3. Dial *1 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).

Note 1: Display indicates the Combined Paging as an External Page. Note 2: If the Internal Page Zone is busy or if there ar e no extension s

in a page group, the page will be announced as an External Page only.

4. Make announcement.

5. Press Speaker to hang up.

Page 32

To Page an external zone:

1. Press External Paging key (Service Code 751: 19 for External Paging zones or 20 for External All Call Paging).

2. Make announcement.

- OR -

1. Press the Speaker key or pick up the handset.

- OR -

2. Dial 703 and the External Paging Zone code (1~8 or 0 for All Call).

- OR -

Dial

1 and the Combined Paging Group code (1~8 or 0 for

Internal/External All Call).

Note 1: Display indicates the Combined Paging as an External Page. Note 2: If the Internal Page Zone is busy or if there are no extensions

in a page group, the page may be announced as an Externa l Page only.

3. Make announcement.

Meet-Me Answer

To join a Meet Me Internal Page:

1. Press the Speaker key or pick up the handset.

2. Dial 763 (if your extension is in the zone called).

- OR -

Dial 764 and the zone number (if your extension is not in the zone called).

- OR -

Press the Meet Me Conference/Paging Pickup key (Service Code 751: 23) if your extension is in the zone called.

Note: You connect to the other party.

Page 33

To join a Meet Me External Page:

1. Press the Speaker key or pick up the handset.

2. Dial 765.

3. Dial the announced External Paging Zone (0~8).

Note: You connect to the other party.

BACKGROUND MUSIC

To turn Background Music on or off:

1. Press the Speaker key.

2. Dial 725.

3. Press Speaker to hang up.

CALL FORWARDING

All Calls (CF/A)

To set Call Forward – Immediate at a forwarding station:

1. Pick up the handset or press the Speaker key.

2. Dial the Call Forward - Immediate Service Code (default: 741).

- OR -

Press the Call Forwarding Programmable Function Key (Service Code 751: 10).

3. Dial 1 (Set).

4. Dial the destination extension or off-premise number.

5. Press the Speaker key or hang up.

Note: Your Call Forwarding Programmable Function Key flashes.

Page 34

To cancel Call Forward – Immediate at a forwarding station:

1. Pick up the handset or press the Speaker key.

2. Dial the Call Forward - Immediate Service Code (default: 741).

- OR -

Press the Call Forwarding Programmable Function Key (Service Code 751: 10).

3. Dial 0 (Cancel).

4. Press the Speaker key or hang up.

Note: Your Call Forwarding Programmable Function Key goes off.

Call Forward Busy/No Answer (B/NA)

To set Call Forward – Busy/No Answer at a forwarding station:

1. Pick up the handset or press the Speaker key.

2. Dial the Call Forward - Busy/No Answer Service Code (default: 744).

- OR -

Press the Call Forwarding Programmable Function Key (Service Code 751: 13).

3. Dial 1 (Set).

4. Dial the destination extension or off-premise number.

5. Press the Speaker key or hang up.

Page 35

To cancel Call Forward – Busy/No Answer at a forwarding station:

1. Pick up the handset or press the Speaker key.

2. Dial the Call Forward - Busy/No Answer Service Code (default: 744).

- OR -

Press the Call Forwarding Programmable Function Key (Service Code 751: 13).

3. Dial 0 (Cancel).

4. Press the Speaker key or hang up.

To set Call Forward – Both Ring at a forwarding station:

1. Pick up the handset or press the Speaker key.

2. Dial the Call Forward - Both Ring Service Code (default: 745).

- OR -

Press the Call Forwarding Programmable Function Key (Service Code 751: 14).

3. Dial 1 (Set).

4. Dial the destination extension number.

5. Press the Speaker key or hang up.

To cancel Call Forward – Both Ring at a forwarding station:

1. Pick up the handset or press the Speaker key.

2. Dial the Call Forward - Both Ring Service Code (default: 745).

- OR -

Press the Call Forwarding Programmable Function Key (Service Code 751: 14).

3. Dial 0 (Cancel).

4. Press the Speaker key or hang up.

Page 36

SELECTABLE DISPLAY MESSAGING

To select a message:

1. Press the Speaker key.

2. Press the Text Message key (Service Code 751: 18 + 01~20).

3. Use Volume Up or Volume Down keys to scroll through the messages if desired.

4. For messages 1~8 and 10, enter digits to append the message if needed.

Note: Y o u can append messages 1-8 and 10 with digits (e.g., the time

when you will be back).

You enter the time in 24-hour format.

5. Press Speaker to hang up.

Note 1: Intercom calls to extensions with Selectable Display

Messaging set will receive a DND signal and receive the display message on their telephone’s disp lay instead of ringing the extension.

Note 2: To allow calls to ring through and have the message

displayed on the calling extension’s display, cancel DND by pressing DND + 0.

To cancel a message:

1. Press the Speaker key

2. Press the Text Message key (Service Code 751: 18 + 00~20)

3. Press Speaker to hang up.

Page 37

SET RELOCATION

To exchange two terminals:

1. Pick up the handset or press the Speaker key.

2. Dial the Extension Data Swap Service Code - not assigned at default.

3. Dial the Extension Data Swap Password - not assigned at default.

4. Dial the extension to be swapped with or relocated to.

5. When successfully completed, confirmation tone will be heard and the display will show completed.

6. Press the Speaker key twice.

CODE RESTRICTION, DIAL BLOCK

To set Dial Block:

1. Press the Speaker key.

2. Dial 600 (default).

3. Dial the 4-digit Dial Block Code (user defined).

4. Dial 1.

Note: Confirmation tone is heard.

5. Press the Speaker key to hang up.

Page 38

To release Dial Block:

1. Press the Speaker key.

2. Dial 600.

3. Dial the 4-digit Dial Block Code.

4. Dial 0.

Note: Confirmation tone is heard.

5. Press the Speaker key to hang up.

Note: At default, Dial Block restriction Class per Extension is denied.

ACCOUNT CODE ENTRY

To enter an Account Code any time while on a trunk call: The outside caller cannot hear the Account Code digits you enter. You

can use this procedure if your system has Optional Account Codes enabled. You may also be able to use this procedure for incoming calls.

1. Dial

- OR -

Press your Account Code key (Service Code 751: code 50).

2. Dial your Account Code (1~16 digits, using 0~9 and #).

Note: If Account Codes are hidden, each digit you dial will show an

“

” character on the telephone’s display.

3. Dial *.

- OR -

Press your Account Code key (Service Code 751: code 50).

Page 39

To enter an Account Code before dialing the outside number: If your system has Forced Account Codes, you must use th is procedure.

If it has Verified Account Codes, you can use this procedure instead of letting the system prompt you for your Account Code. You may also use this procedure if your system has Optional Account Codes. If your system has Verified Account Codes enabled, be sure to choose a code programmed into your Verified Account Code list.

1. Access trunk for outside call.

Note: You can access a trunk by pressing a line key or dialing a code

(except 9).

2. Dial *.

- OR -

Press your Account Code key (Service Code 751: code 50).

3. Dial your Account Code (1~16 digits, using 0~9 and #).

Note: If you make an incorrect entry, your system may automatically

alert the operator. If Account Codes are hidden, each digit you dial will show an “

” character on the telephone’s display.

4. Dial *.

- OR -

Press your Account Code key (Service Code 751: code 50).

5. Dial the number you want to call.

Note: If you hear “stutter dial tone after dialing the number, ARS is

requesting that you enter an Automatic Route Selection Authorization Code.

Page 40

AUTOMATIC CALL DISTRIBUTION (ACD)

Agent Log In

To log in:

1. Press the ACD LOG IN/LOG OUT key (Service Code 752:

10).

- OR -

Press the Speaker key and dial the Log In service code (Default

5).

2. Dial the log in code (up to 20 digits).

Note: This step is not required if the ID code is disabled.

AIC Agent Log In

To log in:

1. Press the ACD LOG IN/LOG OUT key (Service Code 752:

10).

- OR -

Press the Speaker key and dial the AIC Log In service code - not assigned at default.

2. Dial the log in code (up to 20 digits).

Note: This step is not required if the ID code is disabled.

3. Dial the Agent Identity Code (AIC) (up to four digits).

Note: The ACD LOG IN/LOG OUT key lights.

Page 41

Multiple AIC Agent Log In

To log in:

1. Press the ACD LOG IN/LOG OUT key (Service Code 752:

10).

- OR -

Press the Speaker key and dial the AIC Log In service code not assigned at default.

2. Dial 0 to cancel the log out option.

3. Dial the Agent Identity Code (AIC) (up to four digits).

Note: The ACD LOG IN/LOG OUT key lights.

4. Repeat steps 3 and 4.

Note: This step is not required if only using two AIC log ins.

To log out (for single or multiple agent AIC log ins):

Note: All AIC log ins become logged out.

1. Press the ACD LOG IN/LOG OUT key (Service Code 752: *10) + 1 to accept.

2. Press the Speaker key and dial the AIC Log In service code not assigned at default.

Note: The ACD LOG IN/LOG OUT key goes off.

Page 42

Rest Mode

To set the manual Rest Mode:

1. From an idle state, press the ACD Rest Mode key (Servi ce Code 752:

13).

Note 1: The ACD Rest Mode key lights. If the Rest Mode key is

pressed while the agent is on an active call, the key will flash until the agent hangs up.

Note 2: This operation is not available for the System Supervisor.

To cancel the manual Rest Mode:

1. Press the ACD Rest Mode key (Service Code 752:

13).

Note: The ACD Rest Mode key light goes off.

Queue Status Display

When Logged Into ACD Group:

1. From an idle state, press the Queue Status Display key (Service Code 752:

19).

Note 1: The display indicates the number of calls in queue, the trunk

name, and the length of time the call has been waiting.

Note 2: When the Queue Status Display key is pressed, the queue

status of the extension’s group is displayed. When the extension is not in an ACD group, the Queue Status of group 1 is displayed instead.

Note 3: When an agent logs in using an AIC code, the Queue Status

of the default ACD group is displayed.

2. Press W and V to scroll through the Queue S tatus Displays of all the ACD Groups.

3. Press the CLEAR key to return the telephone to an idle state.

Page 43

When Logged Out of ACD Group: When ACD agents are logged out and a call is placed into the ACD

queue, the telephones of the logged out agents will display the Queue Status and hear the alarm according to the settings defined in system programming.

Pressing the Queue Status Display key will return the telephone to idle until the timer expires again.

Answering a Call Using a Headset

1. Press the Headset key to answer.

2. Converse.

3. Press the Headset key to hang up.

Using the Headset with Automatic Answer for ACD Agents

1. With the multiline terminal in an idle state, press the Feature key.

2. Press the HEADSET key (Service Code 751: 05).

Note 1: The Headset key blinks when Automatic Headset is

activated.

Note 2: To cancel Automatic Headset, repeat these steps.

Page 44

STATION SPEED DIAL — DIAL ACCESS

To store a Station Speed Dialing number (display telephones only):

1. Press the Speaker key.

2. Dial 755.

3. Dial the S tation Speed Dial buffer number to be programmed (0~9). 1 = Station Speed Dial buffer 1 2 = Station Speed Dial buffer 2 " " " " " " 0 = Station Speed Dial buffer 10

4. Dial the Access Code (e.g., 9) - if required.

5. Dial telephone number you want to store (up to 24 digits).

Note: Valid entries are 0~9, # and

. To enter a pause, press MIC. To

store a Flash, press Recall.

6. Press Hold.

7. Enter the name associated with the Speed Dialing number (display telephones only):

Key for Entering Names

Use this

keypad

digit . . .

When you want to. . .

2 Enter characters: A-C, a-c, 2 3 Enter characters: D-F, d-f, 3 4 Enter characters: G-I, g-i, 4 5 Enter characters: J-L, j-l, 5 6 Enter characters: M-O, m-o, 6 7 Enter characters: P-S, p-s, 7 8 Enter characters: T-V, t-v, 8 9 Enter characters: W-Z, w-z, 9 0

Enter characters:

Page 45

8. Press Hold.

9. Press the Speaker key to hang up.

LINE KEYS/PROGRAMMABLE FUNCTION KEYS

The following functions can be assigned to Line Keys if allowed by Class of Service.

To Program a Line key as a Programmable Function Key:

1. Press the Speaker key.

2. Dial Service Code 751.

3. Press the Line Key to be programmed.

4. Dial the code for the desired feature plus additional data if required.

5. Press Speaker to hang up.

Note 1: Service Code 00 will erase the function from the key. Note 2: In some cases, the Hold key needs to be pressed before

pressing the Speaker key.

# # = Accepts an entry (only required if two letters on the same key are

needed - ex: TOM). Pressing # again = Space.

Conf Clears the character entry one character at a time (used when ente ring

the Name).

Exit Clears all the entries from the point of the flashing cursor and to the right

(used when entering the Number, this clears both the number and name).

Key for Entering Names

Use this

keypad

digit . . .

When you want to. . .

Enter characters:

Page 46

Function Numbers

Function Number List

[1] Normal Function Code (00 - 99) (Service Code 751 )

Function

Number

Function Additional Data

Not Defined

DSS / One-Touch Extension number or any

numbers (up to 24 digits). Press HOLD to write.

Microphone Key (ON/OFF)

DND Key

BGM (ON/OFF)

Headset

Transfer Key

Conference Key

Incoming Call Log

Day/Night Mode Switch Mode number (1~8)

Call Forward - Immediate

Call Forward - Busy

Call Forward - No Answer

Call Forward - Busy/No Answer

Call Forward - Both Ring

Follow Me

--- Not Used ---

Text Message Setup Message Numbers (01~20)

External Group Paging External Paging Number (1~8)

External All Call Paging

Internal Group Paging Internal Paging Number

(01~64)

Page 47

Internal All Call Paging

Meet-Me Answer to Internal Paging

Call Pickup

Call Pickup for Another Group

Call Pickup for Specified Group

Call Pickup Group Number

Speed Dial -Common/ Private Speed Dial Number (Common

/ Private)

Speed Dial - Group Speed Dial number (Group)

Repeat Redial

Saved Number Redial

Memo Dial

Meet - Me Conference

Override (Off-Hook Signaling)

Break - In

Camp On

Step Call

DND / FWD Override Call

Message Waiting

Room Monitoring

Handset Transmission Cutoff

Buzzer Extension Number

Boss - Secretary Call Extension Number

Series Call

Common Hold

Exclusive

Function Number List

[1] Normal Function Code (00 - 99) ( Service Code 751)

Function

Number

Function Additional Data

Page 48

Department Group Log Out

Reverse Voice Over Extension Number

Voice Over Extension Number

Call Redirect Extension Number or Voice

Mail Number

Account Code

General Purpose Relay Relay No (0, 1~8)

Automatic Answer with Delay Message Setup

Incoming Group Number

Automatic Answer with Delay Message Start

External Call Forward by Door Box

Extension Name Change

General Purpose LED Operation

General Purpose LED Indication

Automatic Transfer at Department Group Call

Extension Group Number (1~8 or 01~64)

Delayed Transfer at Department Group Call

Extension Group Number (1~8 or 01~64)

DND at Department Group Call

Extension Group Number (1~8 or 01~64)

--- Not Used ---

Outgoing Call Without Caller ID (ISDN)

--- Not Used ---

CTI

Function Number List

[1] Normal Function Code (00 - 99) (Service Code 751 )

Function

Number

Function Additional Data

Page 49

--- Not Used ---

Message Change for Voice Attendant

Extension Number or Department Group Number

Keypad Facility Key

Keypad HOLD Key

Keypad RETRIEVE Key

Keypad Conference Key

Toll Restriction in Credit Extension Number

Voice Mail (In-Skin) Extension Number or Pilot

Number

Conversation Recording Voice Mail

Automated Attendant (In-Skin) Extension Number or Pilot

Number

Tandem Ringing 1 = Set

0 = Cancel Extension Number to Tandem Ring

Automatic Transfer to Transfer Key

Trunk Line No. (001~200)

Dterm IP Call Log

Conversation Recording Function (VMSU)

0 = Pause 1 = Re-recording 2 = Address 3 = Erase 4 = Urgent Page

Drop Key

Directory Dialing

Function Number List

[1] Normal Function Code (00 - 99) ( Service Code 751)

Function

Number

Function Additional Data

Page 50

Character Entry

Private Call Refuse

Caller ID Refuse

Dial-In Mode Switching

Do-Not-Call Setup

Do-Not-Call Data Registration

Live Recording Key

92 ~ 99

--- Not Used ---

Key for Entering Names

When entering names, refer to this chart.

Use this

keypad

digit . . .

When you want to. . .

# # = Accepts an entry (only required if two letters on the same key are

needed - ex: TOM). Pressing # again = Space.

Function Number List

[1] Normal Function Code (00 - 99) (Service Code 751 )

Function

Number

Function Additional Data

Enter characters:

Page 51

Conf Clears the character entry one character at a time (used when ente ring

the Name).

Exit Clears all the entries from the point of the flashing cursor and to the right

(used when entering the Number, this clears both the number and name).

Key for Entering Names

When entering names, refer to this chart.

Use this

keypad

digit . . .

When you want to. . .

Page 52

Notes

Page 53

Page 54

INT-1099 (IPK II)

Electra Elite is a registered trademark of NEC America, Inc.

Document Revision 2

For more information contact:

NEC Unified Solutions, Inc.

6555 N State Highway 161

Irving, TX 75039-2402

www.necunified.com