NEC 75F User Manual

MultiSync 75F
MultiSync 95F

User’s Manual

Declaration of the Manufacturer

We hereby certify that the colour monitors
MultiSync 75F (N0701)

MultiSync 95F (N9902)

are in compliance with

Council Directive 73/23/EEC:

- EN 60950

Council Directive 89/336/EEC:

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)

and marked with

English

NEC-Mitsubishi Electric Visual Systems Corporation

686-1, NISHIOI OI-MACHI

ASHIGARAKAMI-GUN

KANAGAWA 258-8533, JAPAN

English-1

Safety Instruction

Caution:

When operating the MultiSync 75F/95F with a 220-240V AC power
source in Europe except UK, use the power cord provided with the
monitor.

In UK, a BS approved power cord with moulded plug has a Black (five
Amps) fuse installed for use with this equipment. If a power cord is not
supplied with this equipment please contact your supplier.

When operating the MultiSync 75F/95F with a 220-240V AC power
source in Australia, use the power cord provided with the monitor.

For all other cases, use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety
standard of your particular country.

ENERGY STAR® Product

As an ENERGY STAR Partner, NEC-Mitsubishi Electronics Display has
determined that this product meets the ENERGY STAR guidelines for
energy efficiency. The ENERGY STAR emblem does not represent EPA
endorsement of any product or service.

CSA

This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulation.

Cet appareil numerique de la class B respecte toutes les exigences du
Reglement sur le materiel brouilleur du Canada.

IBM is registered trademark of International Business Machines Corporation Apple and
Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
ENERGY STAR is a U.S. registered mark.
NEC is a registered trademark of NEC Corporation.

English-2

FCC Information

1. Use the attached specified cables with the N9705 and N9902 color
monitor so as not to interfere with radio and television reception.

(1)Please use the supplied power cable or equivalent to ensure

FCC compliance.

(2)Shielded captive type signal cable.

Use of other cables may cause interference with radio and
television reception.

2. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.

English

If necessary, the user should contact the dealer or an experienced radio/
television technician for additional suggestions. The user may find the
following booklet, prepared by the Federal Communications Commission,
helpful: “How to Identify and Resolve Radio-TV Interference Problems”.
This booklet is available from the U.S. Government Printing Office,
Washington, D.C., 20402, Stock No. 004-000-00345-4.

English-3

TCO‘99

Congratulation! You have just purchased a TCO‘99
approved and labeled product! Your choice has
provided you with a product developed for
professional use. Your purchase has also contributed
to reducing the burden on the environment and also
to the further development of environmentally
adapted electronics products.

Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established
method for encouraging the adaptation of goods and services to the
environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during the manufacturing.
Since it has not been possible for the majority of electronics equipment
to be recycled in a satisfactory way, most of these potentiall y damaging
substances sooner or later enter Nature.

There are also other characteristics of a computer, such as energy
consumption levels, that are important from the viewpoints of both the
work (Internal) and natural (external) environments. Since all methods of
conventional electricity generation have a negative effect on the
environment (acidic and climate-influencing emissions, radioactive
waste, etc.), it is vital to conserve energy.

Electronics equipment in offices consume an enormous amount of
energy since they are often left running continuously.

What does labelling involve?

This product meets the requirements for the TCO‘99 scheme which
provides for international and environmental labelling of personal
computers. The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional Employees), Svenska
Naturskyddsforeningen (The Swedish Society for Nature Conservation)
and statens Energimyndighet (The Swedish National Energy
Administration).

The requirements cover a wide range of issues: environment,
ergonomics, usability, emission of electrical and magnetic fields, energy
consumption and electrical and fire safety.

English-4

The environmental demands concern restrictions on the presence and
use of heavy metals, brominated and chlorinated flame retardants, CFCs
(freons) and chlorinated solvents, among other things. The product must
be prepared for recycling and the manufacturer is obliged to have an
environmental plan which must be adhered to in each country where the
company impl ements i ts operational policy. The energy requirements
include a demand that the computer and/or display, after a certain period
of inactivity, shall reduce its power consumption to a lower level in one or
more stages. The length of time to reactivate the computer shall be
reasonable for the user.

Labelled products must meet strict environmental demands, for example,
in respect of the reduction of electric and magnetic fields, physical and
visual ergonomics and good usability.

Environmental Requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires,
casings and housings. In turn, they delay the spread of fire. Up to thirty
percent of the plastic in a computer casing can consist of flame retar ant
substances. Most flame retardants contain bromine or chloride and these
are related to another group of environmental toxins, PCB‘s, which are
suspected to give rise to severe health effects, including reproductive
damage in fisheating birds and mammals, due to the bio-accumulative*
processes. Flame re t a rdants have been found in human blood and
researchers fear that disturbances in foetus development may occur.

English

TCO‘99 demand requires that plastic components weighing more than
25 grams must not contain flame retardants with organically bound
chlorine and bromine.

Flame retardants are allowed in the printed circuit boards since no
substitutes are available.

Lead**

Lead can be found in picture tubes, display screens, solders and
capacitors. Lead damages the nervous system and in higher doses,
causes lead poisoning.

TCO‘99 requirement permits the inclusion of lead since no replacement
has yet been developed.

English-5