Nautilus T614 User Manual

™

Manual en Español Latino Americano:
http://www.nautilus.com

ASSEMBLY MANUAL / OWNER’S MANUAL

TABLE OF CONTENTS

Important Safety Instructions 3
Safety Warning Labels / Serial Number 6
Grounding Instructions 7
Emergency Stop Procedure 7

Specications 8

Parts 9
Hardware 10
Tools 10
Before Assembly 10
Assembly 11
Moving the Machine 21
Unfolding the Machine 22
Leveling the Machine 23

Features 24
Console Features 25
Operations 31
Getting Started 31
Power Up / Idle Mode 32

Quick Start Program 33

User Proles 33
Prole Programs 35

Pausing or Stopping 39
Results / Cool Down Mode 39
GOAL TRACK Statistics 39
Console Setup Mode 41
Maintenance 42
Cleaning 42
Adjusting the Belt Tension 43
Aligning the Walking Belt 43
Lubricating the Walking Belt 44
Maintenance Parts 46
Troubleshooting 48
Warranty 51

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number __________________________

Date of Purchase ____________________

To register your product warranty, go to: www.nautilus.com/register

Or call 1 (800) 605–3369.

If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).

Nautilus, Inc., (800) NAUTILUS / [phone], www.NautilusInc.com - Customer Service: North America [phone], csnls@
nautilus.com | outside U.S. [e-mail] | Printed in China | © 2014 Nautilus, Inc. | ® indicates trademarks registered in the
United States. These marks may be registered in other nations or otherwise protected by common law. Nautilus, the Cam logo, Nautilus

T614, Nautilus Connect, Bowex, Schwinn, and Universal are trademarks owned by or licensed to Nautilus, Inc. Polar®, OwnCode®,

MyFitnessPal®, WD-40®, and Lube-N-Walk® are trademarks of their respective owners.

2

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obey the following warnings:

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions. Read and understand the complete Manual. Keep
the Manual for future reference.

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug this machine
from the electrical outlet immediately after using and before cleaning.

To decrease the risk of burns, electric shock, or injury to persons, read and understand the complete Owner’s

Manual. Failure to follow these guidelines can cause a serious or possibly fatal electrical shock or other serious injury.

• Keep bystanders and children away from the product you are assembling at all times.

• Do not connect power supply to the machine until instructed to do so.

• The machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on
or taking off parts.

• Before each use, examine the machine for damage to power cord, loose parts or signs of wear. Do not use if found in this
condition. Contact Nautilus Customer Service for repair information.

• Not intended for use by persons with medical conditions where those conditions may impact the safe operation of the

treadmill or pose a risk of injury to the user.

• Do not drop or put objects into any opening of the machine.

• Never operate this treadmill with the air openings blocked. Keep the air openings free of lint, hair and the like.

• Do not assemble this machine outdoors or in a wet or moist location.

• Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps
involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

• Set up this machine on a solid, level, horizontal surface.

• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will
void the warranty.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine
replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the
Manual.

• Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by the
manufacturer.

• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

• Connect this machine to a properly grounded outlet only (see Grounding Instructions).

• Keep the power cord away from heat sources and hot surfaces.

• Do not operate where aerosol products are being used.

• To disconnect, turn all controls to the off position, then remove plug from outlet.

• This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close
range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given
the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider
in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number” section to
determine the location of the magnets on this product.

• SAVE THESE INSTRUCTIONS.

3

Before using this equipment, obey the following warnings:

Read and understand the complete Manual. Keep the Manual for future reference.

Read and understand all warnings on this machine. If at any time the Warning labels become loose, unreadable or
dislodged, contact Nautilus Customer Service for replacement labels.

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord

from the wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the
power cord in a secure location.

• Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous to

children.

• Not intended for use by anyone under 14 years of age.

• Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,

become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or
measured by the machine’s computer for reference purposes only.

• Before each use, examine this machine for damage to power cord, power receptacle, loose parts or signs of wear. Do not

use if found in this condition. Contact Nautilus Customer Service for repair information.

• Maximum user weight limit: 300 lbs. (136 kg). Do not use if you are over this weight.

• Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put fingers or other objects into

moving parts of the exercise equipment.

• Always wear rubber soled athletic shoes when you use this machine. Do not use the machine with bare feet or only

wearing socks.

• Set up and operate this machine on a solid, level, horizontal surface.

• Use caution when you step on and off the machine. Use the supplied foot support platforms for stability before walking on

the moving belt.

• Disconnect all power before servicing this machine.

• Do not operate this machine outdoors or in moist or wet locations.

• Keep at least 24” (0.6 m) on each side of the machine and 79” (2 m) behind the machine clear. This is the recommended

safe distance for access and passage around and emergency dismounts from the machine. Keep third parties out of this
space when machine is in use.

• Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.

• Perform all regular and periodic maintenance procedures recommended in the Owner’s Manual.

• Read, understand, and test the Emergency Stop Procedure before use

• Keep the walking belt clean and dry.

• Do not drop or put objects into any opening of the machine.

• Do not stand on machine motor cover or front trim cover.

• Keep power cord away from heat source and hot surfaces.

• This machine must be connected to an appropriate, dedicated electrical circuit. Nothing else must be connected to the

circuit.

• Always connect the power cord to a circuit capable of handling 15 amperes with no other loads applied.

• Connect this machine to a correctly grounded outlet; consult a licensed electrician for assistance.

• Do not operate where aerosol products are being used.

• Do not let liquids touch the electronic controller. If it does, the controller must be inspected and tested for safety by an

approved technician before it can be used again.

• Do not remove the machine motor cover or the rear roller cover, dangerous voltages and moving parts are present. The

components are serviceable only by approved service personnel.

• The electrical wiring for the residence in which the machine will be used must obey the applicable local and provincial

requirements.

4

• Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in belt speed and incline

angle of deck can occur during workouts, and be attentive in order to avoid loss of balance and possible injury

• A machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on

or taking off parts.

• Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by the

manufacturer.

5

SAFETY WARNING LABELS AND SERIAL
NUMBER

CAUTION
Risk of Injury to Persons - To Avoid injury, use extreme
caution when stepping onto or off of a moving belt.
Read instruction manual before using.

WARNING!

• Prior to use, read and understand the Owner’s

Manual, including all Warnings.

• Inspect product before use. Do not use if any

parts are in need of repair.

• Keep children and pets away from this machine at
all times.

Not intended for use by anyone under 14 years

•

of age.

Product Specification

Serial Number

• This machine is for home use only.

• Use caution when you use this equipment or

serious injury can occur.

• To prevent injury, stand on the Foot Platforms

before you start the machine.

• The maximum user weight for this machine is

136kg ( 300 lb ).

• Replace any “Caution” “Warning” or “Danger”

label that is illegible, damaged, or removed.

• The heart rate displayed on the console is

an approximation and should be used for
reference only.

• When this machine is not in operation, remove

the Safety Key and keep out of the reach of
children.

6

Grounding Instructions

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with
a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do
not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.

If you connect the machine to an outlet with GFI (ground fault interrupt) or AFI (arc fault interrupt), machine operation can
cause the circuit to trip. This machine is for use on a nominal 120-V circuit, and has a grounding plug that looks like the plug
illustrated below. A temporary adapter that looks like the adapter illustrated may be used to connect this plug to a 2-pole
receptacle as shown if a properly grounded outlet is not available.

The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The
tab for the grounding screw must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw.

Grounded

Outlet

Adapter

Metal Screw

Grounded

Grounding Pin

Outlet Box

Tab for
Grounding
Screw

Emergency Stop Procedure

The Treadmill machine is equipped with a Safety Key that can prevent serious injury, as well as prevent children from playing
with and/or being injured on the machine. If the Safety Key is not correctly inserted into the Safety Key Port, the belt will not
operate.

Always attach the Safety Key Clip to your clothing during your workout.

!

When you use the machine, only remove the Safety Key in an emergency. When the key is removed while the machine
is in operation, it will stop quickly, which could cause the loss of balance and possible injury.

For safe storage of the machine, and to prevent unsupervised operation of the machine, always remove the Safety Key
and disconnect the power cord from the wall outlet and the AC input. Place the power cord in a secure location.

The Console will display “ + SAFETY KEY ”, or add Safety Key, for a Safety Key fault. The Treadmill machine will not start a
Workout, or will end and clear an active Workout, when the Safety Key is removed. Inspect the Safety Key and be sure it is
connected to the Console correctly.

7

SPECIFICATIONS

(146.3 cm)

Maximum User Weight: 300 lbs. (136 kg)

Power Requirements:

Operational Voltage: 120V AC

57.6”

72.2”

(183.3 cm)

35.2”

(89.4 cm)

This product, its packaging, and components contain chemicals known to the State of California to cause cancer,
birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you
would like additional information, please refer to our website at www.nautilus.com/prop65.

Operating Current: 15 A

Regulatory Approvals:

• UL1645 Ed. 5 Standard for Safety: Motor-Operated Massage and
Exercise Equipment

• CSA 22.2 No. 68-09 Motor-Operated appliances (household and
commercial)

Maximum Inclined Deck Height: 15.1 inches ( 38.4 cm)
Assembled Weight: approx. 200 lbs ( 90.7 kgs)

8

11

12

PARTS

3

13

1

2

10

9

4

5

6

*

8

Item Qty Description Item Qty Description

1 1 Console Assembly

2 1 Console Backing

3 1 Tray, Left

4 1 Tray, Right

5 1 Upright, Right

6 1 Handlebar Shroud, Right

7 1 Base Shroud, Right

8 1

Base Assembly ( * )

9 1 Base Shroud, Left

10 1 Upright, Left

11 1 Handlebar Shroud, Left

12 1 Power Cord

13 1 Safety Key

14 1

15

Media Cable (not shown)

Silicone Lubricant, Bottle (not shown)

1

7

DO NOT CUT the Shipping Strap on the Base Assembly until it has been placed face up as shown in
the appropriate work space ( * ).

9

HARDWARE / TOOLS / BEFORE ASSEMBLY

A B D

Item Qty Description Item Qty Description

A 4

B 8 Socket Head Hex Screw, M8x16 E

C

Socket Head Hex Screw, M8x50

Phillips Head Screw, M5x14 F

2

C E F

D

10

12

12

Self Tapping Screw, M4.2x16

Lock Washer, M8

Flat Washer, M8

Tools

Included Not Included

#2
6 mm

(recommended)

6 mm

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 83.2” x 151.2” (211.3 cm x 384 cm). Be sure that the workout space
you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum incline of
the machine.

Basic Assembly Tips

Follow these basic points when you assemble your machine:

• Read and understand the “Important Safety Instructions” before assembly.

• Collect all the pieces necessary for each assembly step.

• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter­clockwise) to loosen, unless instructed otherwise.

• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.

• The assembly can require 2 people.

10

ASSEMBLY

8

DO NOT CUT the Shipping Strap on the Base Assembly until it has been placed face up as shown in
the appropriate work space.

1. Fold the Walking Deck on the Base Assembly

Cut the Shipping Strap on the Base Assembly. Make sure that there is safe clearance around, on and above your treadmill.
Make sure there is no object to spill or cause blockage from the fully folded position. Be sure there is adequate height clear­ance for the raised deck.
Using the support bar found below the rear of the walking belt, lift the walking deck fully upward and engage the hydraulic lift.
Be sure that the hydraulic lift is correctly locked in place.

Use proper safety precautions and lifting techniques. Bend your knees and elbows, keep your back straight and pull up
equally with both arms. Make sure that your own physical strength is capable of lifting the walking deck until it engages
the locking mechanism. Use a second person if necessary.

Do not use the walking belt or rear roller to lift the treadmill. These parts do not lock in place and can abruptly move.
Injury to you or damage to the machine can occur.

Make sure that the locking mechanism is engaged. Carefully pull back on the Walking Deck and make sure that it does not

move. When you do this, keep clear of movement path in case the treadmill lock is not engaged.

Do not lean against the treadmill when it is folded. Do not put items on it that could cause it to become unstable or fall.

8

11

2. Connect the Input/Output (I/O) Cables and Attach the Uprights to Frame

Note: Do not crimp cables. Do not fully tighten Hardware until instructed.

X4

B

E

F

10

5

12

X4

F

E

A

3. Unfold the Walking Deck

Slightly push the walking deck forward toward the front of the machine. With your left foot lightly push the top part of the
hydraulic lift forward until the locking tube releases and you can pull the walking deck slightly toward the rear of the machine.
Hold up the rear of the walking deck, and move to the side of the machine.

Keep clear of the movement path of the walking deck.

The hydraulic lift is set up to drop lightly. Hold onto the walking deck until approximately 2/3 of the movement down. Make
sure that you use proper lifting technique; bend your knees and keep your back straight. The walking deck can possibly drop
quickly in the last part of the movement.

13

4. Remove the Console Backing from the Console Assembly

Note: Dispose of the pre-installed hardware.

#2

X4

*

2

1

14

5. Connect the I/O Cables and Attach the Console to Frame Assembly

Note: Do not crimp the Cables.

1

X4

F

E

B

6mm

15

6. Fold the Walking Deck and tighten ALL Hardware from previous steps

7. Place the Base Shrouds onto the Frame Assembly, and then unfold the Walking Deck

Note: Unfold the Walking Deck after the Base Shrouds have been placed onto the Frame Assembly. The Base Shrouds

do not use hardware or snap onto the Frame Assembly.

9

16

7