R618
ASSEMBLY MANUAL / OWNER’S MANUAL
TABLE OF CONTENTS
Important Safety Instructions |
3 |
Operations |
29 |
Safety Warning Labels / Serial Number |
5 |
Adjustments |
29 |
Specifications |
6 |
Power Up / Idle Mode |
30 |
Before Assembly |
6 |
Initial Setup |
30 |
Parts |
7 |
Quick Start Program |
30 |
Hardware |
8 |
User Profiles |
31 |
Tools |
8 |
Profile Programs |
32 |
Assembly |
9 |
Pausing or Stopping |
35 |
Moving the Machine |
19 |
Results / Cool Down Mode |
36 |
Leveling the Machine |
20 |
GOAL TRACK Statistics |
36 |
Features |
21 |
Console Service Mode |
38 |
Console Features |
22 |
Maintenance |
39 |
Bluetooth® Connectivity |
25 |
Heart Rate Chest Strap Battery Replacement |
40 |
Remote Heart Rate Monitor |
27 |
Maintenance Parts |
41 |
Remote Resistance Controls |
28 |
Troubleshooting |
42 |
|
|
Warranty |
45 |
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.Nautilus.com/register Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | © 2015 Nautilus, Inc. ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Nautilus, the Nautilus logo, Nautilus Trainer, Nautilus Connect, Bowflex, Schwinn, and Universal are trademarks owned by or licensed to Nautilus,
Inc. Polar®, OwnCode®, Loctite®, iTunes®, Google Play™, Under Armour® and MyFitnessPal® are trademarks of their respective owners. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Nautilus, Inc. is under license.
2
IMPORTANT SAFETY INSTRUCTIONS
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
•Keep bystanders and children away from the product you are assembling at all times.
•Do not connect power supply to the machine until instructed to do so.
•Do not assemble this machine outdoors or in a wet or moist location.
•Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
•Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
•Set up this machine on a solid, level, horizontal surface.
•Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.
•If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.
•Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual.
•Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future reference.
•Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
Before using this equipment, obey the following warnings:
Read and understand the complete Manual. Keep the Manual for future reference.
Read and understand all warnings on this machine. If at any time the Warning labels become loose, unreadable or dislodged, contact Nautilus Customer Service for replacement labels.
•Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous to children.
•Not intended for use by anyone under 14 years of age.
•Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only.
•Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition.
Monitor the Seat, Pedals, and Crank Arms closely. Contact Nautilus Customer Service for repair information.
•Maximum user weight limit: 325 lbs. (147.4 kg). Do not use if you are over this weight.
•This machine is for home use only.
•Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put fingers or other objects into moving parts of the exercise equipment.
•Set up and operate this machine on a solid, level, horizontal surface.
•Make the Pedals stable before you step on them. Use caution when you step on and off the machine.
•Disconnect all power before servicing this machine.
•Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals clean and dry.
3
•Keep at least 24” (0.6 m) on each side of the machine clear. This is the recommended safe distance for access and passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in use.
•Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.
•Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not hit the user.
•Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in speed and resistance level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.
•Prior to use, read and understand the owner’s manual. The appliance is not to be used by persons with functional limitations and impairments, reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
4
SAFETY WARNING LABELS AND SERIAL NUMBER
WARNING
•Keep hands and feet away.
Product
Specification
Serial Number
FCC Compliance
WARNING!
•Injury or death is possible if caution is not used while using this machine.
•Keep children and pets away.
•Read and follow all warnings on this machine.
•Refer to the Owner’s Manual for additional warnings and safety information.
•The heart rate displayed is an approximation and should be used for reference only.
•Not intended for use by anyone under 14 years of age.
•The maximum user weight for this machine is 325 lbs ( 147 kg ).
•This machine is for home use only.
!Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The machine and power supply comply with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This machine and power supply have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
5
SPECIFICATIONS
|
Maximum User Weight: |
325 lbs. (147.4 kg) |
|
|
Machine Weight: |
107.1 lbs. (48.6 kg) |
|
|
Power Requirements: |
|
|
48.8” |
Operational Voltage: 9VDC |
|
|
(124 cm) |
Operating Current: |
1500 mA |
|
|
Heart Rate Chest Strap: |
1 CR2032 battery |
|
67.3” |
Regulatory Approvals: |
|
|
(171 cm) |
|
|
|
26.4” |
|
|
|
(67 cm) |
|
|
|
|
AC Power Adapter: |
UL listed, Rated 100V-240V 50/60Hz Input, |
|
|
|
9VDC, 1500mA Output. Class 2. |
|
WARNING: This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 74” x 115” (1.9m x 2.9m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
•Read and understand the “Important Safety Instructions” before assembly.
•Collect all the pieces necessary for each assembly step.
•Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.
•When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
•The assembly can require 2 people.
6
21 19
22
18
17
16 (R)
15
20
PARTS
1 |
5 |
|
|
|
4 |
|
3 |
|
2 |
6 
|
7 |
10 |
8 |
|
|
9 |
11 |
12
13 (L)
14
Item |
Qty |
Description |
Item |
Qty |
Description |
|
|
|
|
|
|
1 |
1 |
Console |
12 |
1 |
Seat Adjustment Handle |
|
|
|
|
|
|
2 |
1 |
Seat Frame Assembly |
13 |
1 |
Left Pedal |
3 |
2 |
Seat Pivot Shroud |
14 |
1 |
Front Stabilizer |
|
|
|
|
|
|
4 |
1 |
Seat Bottom |
15 |
1 |
Top Shroud |
5 |
1 |
Top Cap |
16 |
1 |
Right Pedal |
6 |
1 |
Seat Back |
17 |
1 |
Water Bottle Holder |
7 |
1 |
Seat Rail End Cap |
18 |
1 |
Console Mast |
8 |
1 |
Frame |
19 |
1 |
Console Pivot Shroud |
9 |
1 |
Seat Recline Handle |
20 |
1 |
AC Adapter |
10 |
1 |
Shock Shroud |
21 |
1 |
MP3 Cord |
11 |
1 |
Rear Stabilizer |
22 |
1 |
Heart Rate Chest Strap |
7
HARDWARE / TOOLS
|
|
A |
B |
C |
D |
E |
F |
G |
|
|
|
H |
I |
J |
K |
L |
M |
N |
O |
Item |
Qty |
Description |
|
|
Item |
Qty |
Description |
|
|
A |
8 |
Button Head Hex Screw, M8x16 |
I |
2 |
Lock Nut, M8 |
||||
B |
2 |
Button Head Hex Screw, M6x12 |
J |
4 |
Curved Washer, M6 |
||||
C |
2 |
Bolt, Partially Threaded, M8x50 |
K |
1 |
Bolt, Partially Threaded, M8x27 |
||||
D |
4 |
Phillips Head Screw, M6x25 |
|
L |
1 |
Thin Nut, M8 |
|||
E |
10 |
Flat Washer, M8 |
|
|
M |
2 |
Phillips Head Screw, M5x12 |
||
F |
10 |
Lock Washer, M8 |
|
|
N |
2 |
Button Head Hex Screw, M8x25 (with |
||
|
|
|
|
|
|
|
|
Loctite® adhesive) |
|
G |
2 |
Flat Washer, M6 |
|
|
O |
1 |
Serrated Washer, M8 |
||
H |
6 |
Lock Washer, M6 |
|
|
|
|
|
|
|
Note: Select pieces of Hardware have been provided as spares on the Hardware Card. Be aware that there may be remaining Hardware after the proper assembly of your machine.
Tools
Included Not Included
(recommended)
4 mm
6 mm
8
ASSEMBLY
1a. Attach Stabilizers to Frame
Note: Hardware(*) is pre-installed on the stabilizers and not on Hardware Card. Make sure transport wheels on the front stabilizer point forward.
|
|
|
6mm |
6mm |
|
|
X2 |
|
|
|
|
|
|
8 |
* |
|
X2 |
|
|
|
|
* |
|
|
|
|
|
* |
|
|
* |
* |
|
|
|
* |
|
|
11 |
|
|
|
14
1b. Attach the Seat Rail End Cap to the Frame Assembly
7
9
2. Install the Seat Frame Assembly to the Seat Rail and Attach Top Cap
NOTICE: Do not cut the ziptie on the cables in the Frame. Do not crimp the Resistance and Heart Rate Cables. Remove the ziptie on the Shock Assembly and seat slider bracket.
Hand tighten all hardware first, then fully tighten it. Be sure the cables are tucked inside the Top Cap.
X4
6mm
A
F |
2 |
|
E |
4mm
X2
G H B
2
B
5
10
3. Attach the Seat Pivot Shrouds and Seat Back to the Seat Frame Assembly
3
3
6
I
C 6mm
I
11
4. Install the Seat Recline Handle and Connect the Shock Assembly to the Seat Back
Note: Put the end of the Seat Recline Handle through the opening in the Shock Shroud. Push the Seat Recline Handle through the holes in the Shock bracket (8a) and tighten the Thin Nut (L) and Serrated Washer (O) onto the Handle.
Align holes in the Seat Recline Arm (6a) and Shock Assembly (8b), and install the bolt (K) through the holes.
Install the Shock Shroud to the Frame.
|
|
|
|
M |
K |
L |
O |
10 |
9 |
|
||||
|
|
|
** |
10 |
9 |
9 |
** |
|
|
|
O |
** Shock Shroud (10) is not shown for clarity.
8b |
6a |
M |
|
|
10 |
#2 |
** |
|
K |
|
6mm
12
5. Attach Seat Adjustment Handle to Frame Assembly
|
X2 |
|
N |
F E |
|
12 |
||
|
6 mm
13
6. Attach Seat Bottom to Seat Frame Assembly
4
X4
J 
H 
D
#2
14
Loading...