MTD OEM-190-626, OEM-190-625 User Manual

Operator’s Manual

Twin Rear Bagger

For Revolution

™

and ZTT Model Lawn Tractors

Models
OEM-190-625

(for 42-inch decks)

OEM-190-626 (for 46-inch decks)

MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722

PRINTED IN U.S.A.

FORM NO.

770-10442.fm

(8/2000)

FINDING YOUR MODEL NUMBER

This Operator’s Manual is an important part of your new twin bagger grass collector. It will help you
assemble, prepare and maintain the unit for best performance. Please read and understand what it says.

Before you start assembling your new equipment, please locate the model plate on the
equipment and copy the information from it in the space provided below. The information on
the model plate is very important if you need help from our Customer Support Department or
an authorized dealer.

• You can locate the model number by looking front, left portion of the plastic grass catcher cover. See
Figure 1.

Model Plate

Figure 1

• A sample model plate is explained below. For future reference, please copy the model number and
the serial number of the equipment in the space below.

(Model Number)

CLEVELAND, OHIO 44136

(Serial Number)

MTD PRODUCTS INC

Copy the model number here:

Copy the serial number here:

CALLING CUSTOMER SUPPORT

If you have difficulty assembling this product or have any questions regarding the controls, operation or
maintenance of this unit, please call the Customer Support Department.

Call 1- (330) 220-4MTD (4683) or 1- (800)-800-7310 to reach a Customer Support
representative. Please have your unit’s model number and serial number ready when you
call. See previous section to locate this information. You will be asked to enter the serial
number in order to process your call.

For more details about your unit, visit our website at www.mtdproducts.com

2

SECTION 1: TO THE OWNER

Model 625 and Model 626 Twin Rear Bagger Kits are grass collection systems designed for use on Revolution™ and
ZTT Model Lawn Tractors equipped either a 42-inch cutting deck (Model 625) or a 46-inch cutting deck (Model 626)
only. It will NOT fit on any other tractor, regardless of the tractor’s FastAttach

The instructions in this manual are divided into sections. Carefully read all sections and study the illustrations to
ensure proper installation and usage of this attachment. Read and observe all WARNING statements. They are
included to provide for the protection of the equipment installer and user, and to ensure the prolonged service life of
the equipment.

™

compatibility.

NOTE: References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the

operator’s position. Reference to the FRONT indicates the grille end; to the REAR the drawbar end.

SECTION 2: CONTENTS OF CARTON

Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents
are listed below and shown in . Hardware part number are shown in parentheses.

One Chute Tube

One Discharge Tube Assembly

One Set of Blades (Model 626 only)

One Extension Tube

Two Grass Bag Assemblies

One Grass Catcher Cover Assembly

One Bracket Assembly w/ Clevis Pin (711-0309A)
& Hairpin Clip (714-0117) in place.

Extension

Tube

Discharge Chute

Assembly

Chute Tube

Cover Assembly

Support Tube

(attached to cover)

Bracket Assembly

Blades

(Model 626 Only)

Bag Assemblies

Figure 2

3