MSI P965 NEO-F - Motherboard - ATX, P965 NEO-F V2 User Manual
P965Neo-F V2
Series
MS-7235 (V2.X) Mainboard
G52-72351XC
i
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.
NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trade-
marks of NVIDIA Corporation in the United States and/or other countries.
AMD, Athlon™ , Athlon™ XP, Thoroughbred™, and Duron™ are registered trade-
marks of AMD Corporation.
Intel® and Pentium® are registered trademarks of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines
Corporation.
Windows® 95/98/2000/NT/XP are registered trademarks of Microsoft Corporation.
Netware® is a registered trademark of Novell, Inc.
Award® is a registered trademark of Phoenix Technologies Ltd.
AMI® is a registered trademark of American Megatrends Inc.
Revision History
Revision Revision History Date
V2.1 First release March 2007
Technical Support
If a problem arises with your system and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor. Alternatively,
please try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates,
and other information: http://www.msi.com.tw/program/service/faq/
faq/esc_faq_list.php
Contact our technical staff at: http://support.msi.com.tw
ii
Safety Instructions
1. Always read the safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V before connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage or cause electrical
shock.
11. If any of the following situations arises, get the equipment checked by a service
personnel:
† The power cord or plug is damaged.
† Liquid has penetrated into the equipment.
† The equipment has been exposed to moisture.
† The equipment has not work well or you can not get it work according to
User’s Manual.
† The equipment has dropped and damaged.
† The equipment has obvious sign of breakage.
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F), IT MAY DAMAGE THE EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
iii
FCC-B Radio Frequency Interference Statement
This equipment has been
tested and found to comply
with the limits for a Class B
digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the measures listed
below.
† Reorient or relocate the receiving antenna.
† Increase the separation between the equipment and receiver.
† Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
† Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D ’INSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7235
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
iv
WEEE (Waste Electrical and Electronic Equipment) Statement
v
vi
vii
CONTENTS
Chapter 1 Getting started.....................................................................................1-1
Mainboard Specifications...................................................................................1-2
Mainboard Layout................................................................................................1-4
Packing Checklist.................................................................................................1-4
MSI Special Feature............................................................................................1-6
Chapter 2 Hardware Setup...................................................................................2-1
Quick Components Guide....................................................................................2-2
CPU (Central Processing Unit)............................................................................2-2
Introduction to LGA 775 CPU......................................................................2-3
CPU & Cooler Installation.............................................................................2-4
Dual Channel Memory Population Rules....................................................2-7
Memory.................................................................................................................2-7
Installing DDRII Modules...............................................................................2-8
Power Supply......................................................................................................2-8
ATX 24-Pin Power Connector: ATXPWR1.................................................2-9
ATX 12V Power Connector: JPW1............................................................2-9
Back Panel...........................................................................................................2-11
Floppy Disk Drive Connector: FDD1..........................................................2-12
Hard Disk Connector: IDE1........................................................................2-12
Connectors........................................................................................................2-12
Serial ATAII Connectors: SATA1/2/3/4/7..................................................2-13
Fan Power Connectors: CPUFAN1, NBFAN1, SYSFAN1.......................2-14
Chassis Intrusion Switch Connector: JCASE1.......................................2-14
SPDIF-Out Connector: JSPD1 (Optional, for HDMI graphics card only)2-15
CD-In Connector: CD_IN1..........................................................................2-15
Front Panel Audio Connector: JAUD1......................................................2-15
Front Panel Connectors: JFP1/JFP2........................................................2-16
IEEE 1394 Connectors: J1394_1 (Optional)............................................2-17
Front USB Connectors: JUSB2, JUSB3, JUSB4......................................2-18
IrDA Infrared Module Header: JIR1...........................................................2-19
SPI Debugging Pin Header: JSPI1.............................................................2-19
Jumpers..............................................................................................................2-20
Clear CMOS Jumper: JBAT1.....................................................................2-20
Slots....................................................................................................................2-20
PCI (Peripheral Component Interconnect) Express Slots......................2-21
PCI (Peripheral Component Interconnect) Slots......................................2-21
PCI Interrupt Request Routing...................................................................2-22
viii
Chapter 3 BIOS Setup.............................................................................................3-1
Entering Setup.....................................................................................................3-2
The Main Menu.....................................................................................................3-4
Standard CMOS Features...................................................................................3-6
Advanced BIOS Features...................................................................................3-8
Advanced Chipset Features............................................................................3-10
Integrated Peripherals.......................................................................................3-10
Power Management Setup...............................................................................3-12
PNP/PCI Configurations.....................................................................................3-17
Cell Menu............................................................................................................3-18
H/W Monitor........................................................................................................3-19
Load Optimized Defaults...................................................................................3-23
BIOS Setting Password.....................................................................................3-23
Appendix A Realtek ALC888 Audio....................................................................A-1
Installation for Windows 2000/XP......................................................................A-2
Installing the Realtek HD Audio Driver................................................................A-2
Software Configuration......................................................................................A-4
Sound Effect................................................................................................A-5
Mixer.............................................................................................................A-8
Audio I/O.....................................................................................................A-12
Microphone................................................................................................A-16
3D Audio Demo...........................................................................................A-17
Information..................................................................................................A-18
Hardware Setup................................................................................................A-18
ix
Getting Started
Chapter 1
Getting Started
Thank you for choosing the P965Neo-F V2 Series (MS7235 v2.X) ATX mainboard. The P965Neo-F V2 Series
mainboards are based on Intel® P965 / G965 & ICH8
chipsets for optimal system efficiency. Designed to fit
the advanced Intel® Pentium 4 LGA775 series
processors, the P965Neo-F V2 Series deliver a high
performance and professional desktop platform
solution.
1-1
MS-7235 Mainboard
Mainboard Specifications
Processor Support
- Intel® Kentsfield, Core 2 Duo, Pentium 4, Pentium D, and Celeron D
processors in the LGA775 package
- Supports 4 pin CPU Fan Pin-Header with Fan Speed Control
- Supports EIST Technology
- Supports Hyper-Threading (HT) Technology
- Supports Intel Quad Core / Dual Core Technology up to 1066 MHz
(For the latest information about CPU, please visit http://www.msi.
com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php)
Supported FSB
- 1066/ 800/ 533 MHz
Chipset
- North Bridge: Intel® P965/ G965 chipset
- South Bridge: Intel® ICH8 chipset
Memory Support
- DDRII 800/667/533 SDRAM (8GB Max)
- 4 DDRII DIMMs (240pin / 1.8V)
(For the updated supporting memory modules, please visit http://www.
msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_list.php)
LAN
- Supports PCI LAN 10/100/1000 Fast Ethernet by Realtek 8110SC
Audio
- Chip integrated by Realtek® ALC888
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
- Meet Microsoft Vista Premium spec
IDE
- 1 IDE port by Marvell 88SE6111
- Supports Ultra DMA 66/100/133 mode
- Supports PIO, Bus Master operation mode
SATA
- 4 SATA II ports by ICH8
- 1 SATA II port by Marvell 88SE6111
- Supports storage and data transfers at up to 300 MB/s
1394 (optional)
- 2 1394 ports by VIA VT6308, front x 1, real x 1
Floppy
- 1 floppy port
- Supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
1-2
Connectors
Back panel
- 1 PS/2 mouse port
- 1 PS/2 keyboard port
- 1 VGA port (optional, for G965 only)
- 1 serial port (COM1)
- 1 parallel port supporting SPP/EPP/ECP mode
- 4 USB 2.0 Ports
- 1 LAN jack (10/100/1000)
- 6 flexible audio jacks
- 1 1394 port (optional)
On-Board Pinheaders
- 3 USB 2.0 pinheaders
- 1 1394 pinheader (optional)
- 1 S/PDIF pinheader (optional)
- 1 Front Audio pinheader
- 1 IrDA pinheader
- 1 Chassis intrusion pinheader
- 1 CD-in connector
Getting Started
Slots
- 1 PCI Express x16 slot
- 1 PCI Express x1 slot
- 1 PCI Express x4 slot
- 2 PCI slots
- Support 3.3V/ 5V PCI bus Interface
Form Factor
- ATX (30.5cm X 22.5cm)
Mounting
- 6 mounting holes
1-3
MS-7235 Mainboard
D
IMM1D
IMM3D
IMM2D
IMM
4
ATXPW
R
1
SYSFAN1
NBFAN1
ALC888
Intel
(optional)
I
DE1
(optional)
Mainboard Layout
Top : mouse
Bottom:
keyboard
Top :
Parallel Port
Bottom:
COM portA
VGA port (G965 only)
Top:1394 (optional)
Bottom: USB ports
JPW1
Top: LAN Jack
Bottom: USB ports
T:
Line-In
M:
Line-Out
B:
Mic
T:RS-Out
M:CS
-Out
B:SS- Out
RTL8110SC
VT6308P
(optional)
JAUD1
1
R
I
J
PCI 1
PCI 2
CD_IN1
CPUFAN1
F71882FG
PCIE1
PCIE2
PCIE3
JSPD1
JCASE1
J1394_1
FDD1
Intel
P965/ G965
JSPI1
BATT
+
JUSB2 JUSB3
ICH8
JBAT1
4
A
T
A
S
JUSB4
7
A
T
A
S
1
A
T
2
3
A
T
A
S
JFP1
A
A
S
T
A
S
2
P
F
J
P965Neo-F V2 Series (MS-7235 v2.X) ATX Mainboard
1-4
Packing Checklist
Getting Started
MSI motherboard
Power Cable
MSI Driver/Utility CD
Standard Cable for
IDE Devices
SATA Cable
Back IO Shield
User’s Guide
* The pictures are for reference only. Your packing contents may vary
depending on the model you purchased.
1-5
MS-7235 Mainboard
MSI Special Feature
The Core Center is a new utility you can find in the CD-ROM disk. The utility is just like
your PC doctor that can detect, view and adjust the PC hardware and system status
during real time operation. In the left side it shows the current system status, including the Vcore, 3.3V, +5V and 12V. In the right side it shows the current PC hardware
status such as the CPU & system temperatures and all fans speeds.
When you click the red triangles in the left and right sides, two sub-menus will open
for users to adjust the thresholds of system to send out the warning messages.
1-6
Getting Started
Left-wing: Current system status
In the left sub-menu, you can configure the settings of FSB, Vcore, Memory Voltage
and AGP Voltage by clicking the radio button next to each item and make it available
(the radio button will be lighted as yellow when selected), use the “+” and “-” buttons
to adjust, then click “OK” to apply the changes. Then you can click “Save” to save
the values you just configured.
Also you may click “Auto” to start testing the maximum CPU overclocking value. The
CPU FSB will automatically increase the testing value until the PC reboots. Or you may
click “Default” to restore the default values.
Right-wing: PC hardware status during real time operation
In the right sub-menu, here you can configure the PC hardware status such as CPU
& system temperatures and fan speeds. You may use the scroll bars to adjust each
item, then click “OK” to apply the changes. The values you set for the temperatures
are the maximum thresholds for the system for warnings, and the value for fan
speeds are the minimum thresholds.
Important
Items shown on Core Center vary depending on your system status.
1-7
Hardware Setup
Chapter 2
Hardware Setup
This chapter provides you with the information about
hardware setup procedures. While doing the installation,
be careful in holding the components and follow the
installation procedures. For some components, if you
install in the wrong orientation, the components will not
work properly.
Use a grounded wrist strap before handling computer
components. Static electricity may damage the
components.
2-1
MS-7235 Mainboard
Quick Components Guide
JPW1, p.2-9
CPU, p.2-3
CPUFAN1,
p.2-14
Back Panel
I/O, p.2-10
JCASE1, p.2-14
DDRII DIMMs, p.2-7
SYSFAN1, p.2-14
JIR1,
p.2-19
PCI Express
slots, p.2-21
PCI Slots,
p.2-21
JSPD1,
p.2-15
CD_IN1,
p.2-15
J1394_1,
p.2-17
FDD1,
p.2-12
JUSB2~4,
p.2-18
JBAT1,
p.2-20
ATXPWR1,
p.2-9
NBFAN1,
p.2-14
JSPI1, p.2-19
SATA7,
p.2-13
IDE1,
p.2-12
SATA1~4,
p.2-13
JFP2,
p.2-16
JFP1,
p.2-16
JAUD1,
p.2-15
2-2
Hardware Setup
CPU (Central Processing Unit)
This mainboard supports Intel® Pentium 4, Pentium D, CoreTM 2 processor in LGA 775
package. When you are installing the CPU, make sure to install the cooler to
prevent overheating. If you do not have the CPU cooler, contact your dealer to
purchase and install them before turning on the computer.
For the latest information about CPU, please visit http://www.msi.com.tw/program/
products/mainboard/mbd/pro_mbd_cpu_support.php.
Important
1. Overheating will seriously damage the CPU and system. Always make
sure the cooling fan can work properly to protect the CPU from overheating.
2. Make sure that you apply an even layer of heat sink paste (or thermal tape)
between the CPU and the heatsink to enhance heat dissipation.
3. While replacing the CPU, always turn off the ATX power supply or unplug
the power supply’s power cord from the grounded outlet first to ensure the
safety of CPU.
Introduction to LGA 775 CPU
The pin-pad side of LGA 775
CPU.
Alignment Key Alignment Key
Yellow triangle is the Pin 1 indicator
The surface of LGA 775 CPU.
Remember to apply some silicone
heat transfer compound on it for
better heat dispersion.
Yellow triangle is the Pin 1 indicator
2-3
MS-7235 Mainboard
CPU & Cooler Installation
When you are installing the CPU, make sure the CPU has a cooler at-
tached on the top to prevent overheating. If you do not have the cooler, contact
your dealer to purchase and install them before turning on the computer. Meanwhile,
do not forget to apply some silicon heat transfer compound on CPU before installing
the heat sink/cooler fan for better heat dispersion.
Follow the steps below to install the CPU & cooler correctly. Wrong installation
will cause the damage of your CPU & mainboard.
1.The CPU has a plastic cap on it to
protect the contact from damage.
Before you install the CPU, always
cover it to protect the socket pin.
3.The pins of socket reveal.
2.Remove the cap from lever hinge
side (as the arrow shows).
4.Open the load lever.
2-4
Hardware Setup
Important
1.Confirm if your CPU cooler is firmly installed before turning on your system.
2. Do not touch the CPU socket pins to avoid damaging.
3. The availability of the CPU land side cover depends on your CPU packing.
5.Lift the load lever up and open the
load plate.
7.Visually inspect if the CPU is
seated well into the socket. If not,
take out the CPU with pure vertical
motion and reinstall.
6.After confirming the CPU direction
for correct mating, put down the
CPU in the socket housing frame.
Be sure to grasp on the edge of
the CPU base. Note that the alignment keys are matched.
alignment
key
8.Cover the load plate onto the
package.
2-5
MS-7235 Mainboard
9.Press down the load lever lightly
onto the load plate, and then secure the lever with the hook under
retention tab.
11.Press the four hooks down to fas-
ten the cooler. Then rotate the locking switch (refer to the correct direction marked on it) to lock the
hooks.
10. Align the holes on the mainboard
with the heatsink. Push down the
cooler until its four clips get
wedged into the holes of the
mainboard.
12.Turn over the mainboard to confirm that the clip-ends are correctly inserted.
locking
switch
Important
1.Check the information in H/W Monitor of BIOS (Chapter 3) for the CPU
temperature.
2. Whenever CPU is not installed, always protect your CPU socket pin with the
plastic cap covered (shown in Figure 1) to avoid damaging.
2-6
Hardware Setup
1
2
3
Memory
The mainboard provides four 240-pin non-ECC DDRII 800/667/533 DIMM slots and
supports up to 8GB system memory.
For more information on compatible components, please visit http://www.msi.com.tw/
program/products/mainboard/mbd/pro_mbd_trp_list.php.
DDRII
240-pin, 1.8V
64x2=128 pin 56x2=112 pin
Single-Channel: All DIMMs in GREEN
Dual-Channel: Channel A in GREEN; Channel B in ORANGE
Dual Channel Memory Population Rules
DIMM1
DIMM2
DIMM3
DIMM4
DIMM1
DIMM2
DIMM3
DIMM4
DIMM1
DIMM2
DIMM3
DIMM4
-
2-7
MS-7235 Mainboard
Installing DDRII Modules
1. The memory module has only one notch on the center and will only fit in the right
orientation.
2. Insert the memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot.
Important
You can barely see the golden finger if the module is properly inserted in the
DIMM slot.
3. The plastic clip at each side of the DIMM slot will automatically close.
Volt
Notch
Important
-DDRII modules are not interchangeable with DDR and the DDRII standard is
not backwards compatible. You should always install DDRII memory modules in the DDRII DIMM slots and DDR memory modules in the DDR DIMM
slots.
-In dual-channel mode, make sure that you install memory modules of the
same type and density in differentchannel DDR DIMM slots.
-To enable successful system boot-up, always insert the memory modules
into the DIMM1 first.
2-8
Hardware Setup
Power Supply
ATX 24-Pin Power Connector: ATXPWR1
This connector allows you to connect an ATX 24-pin power supply.
To connect the ATX 24-pin power supply, make sure the plug of the
power supply is inserted in the proper orientation and the pins are
aligned. Then push down the power supply firmly into the connector.
You may use the 20-pin ATX power supply as you like. If you’d like
to use the 20-pin ATX power supply, please plug your power supply along with pin 1 & pin 13 (refer to the image at the right hand).
There is also a foolproof design on pin 11, 12, 23 & 24 to avoid
wrong installation.
Pin Definition
pin 13
pin 12
PIN SIGNAL
13 +3.3V
14 -12V
15 GND
16 PS-ON#
17 GND
18 GND
19 GND
20 Res
21 +5V
22 +5V
23 +5V
24 GND
ATXPWR1
12
1
24
13
PIN SIGNAL
1 +3.3V
2 +3.3V
3 GND
4 +5V
5 GND
6 +5V
7 GND
8 PWR OK
9 5VSB
10 +12V
11 +12V
12 NC
ATX 12V Power Connector: JPW1
This 12V power connector is used to provide power to the CPU.
Pin Definition
3 4
1
JPW1
2
PIN SIGNAL
1 GND
2 GND
3 12V
4 12V
Important
1. Maker sure that all the connectors are connected to proper ATX power supplies to ensure stable operation of the mainboard.
2. Power supply of 350 watts (and above) is highly recommended for system
stability.
3. ATX 12V power connection should be greater than 18A.
2-9
Loading...