Motorola XTS3000, XTS3500 Parts List
Parts List
XTS3000/XTS3500 Series
8/03
8/03
Parts List
XTS3000/XTS3500 Series
REF.
NO. PART NO. DESCRIPTION
REF.
NO. PART NO. DESCRIPTION
1 3605370Z01 Knob, Frequency
2 1305374Z01 Escutcheon, Frequency
3 4305373Z01 Insert Retainer, Frequency
4 4505375Z01 Lever, Secure Frequency
5 6105376Z01 Lightpipe Indicator/Stop, Frequency
6 NTN8266B Clip, Belt
7 NTN8294BR Battery, NiCd
8 3605371Z01 Knob, Volume
9 4305372Z01 Insert Retainer, Volume Knob
10 ---- Label, Motorola, Back; not field repairable
11 ---- Label, Flashport; not field repairable
12 ---- Label, Radio Serial number; not field
repairable
13 ---- Label, Approval Agency; not field repairable
14 ---- Label, Bottom; not field repairable
15 8505241U03 Antenna, 800 MHz Whip (806-870 MHz)
or
NAF4000B Antenna, 800 MHz Dipole (806-870 MHz)
or
8505241U06 Antenna, 800 MHz Stubby Quarterwave
(806-870 MHz)
16 ---- Escutcheon, Concentric Switch (optional);
not field repairable
17 ---- Escutcheon, Toggle (optional);
not field repairable
18 1505579Z01 Cover, Dust, Universal Connector
19 3305573Z01 Label, Motorola, Front
20 3505586Z01 Gortex
21 3205379W01 “O” Ring
8/03
Portable
Accessories
XTS3000/XTS3500 Series
Chargers
Single Unit Universal Tri-Chemistry Chargers
Tri-Chem chargers support Nickel Cadmium, Nickel Metal Hydride
and Lithium-ion batteries.
NTN1667A Single Unit, universal tri-chem rapid charge, 110V
NTN1668A Single Unit, universal tri-chem rapid charge, 220V
NTN1669A Single Unit, universal tri-chem rapid charge, 240V
Multi-Unit Chargers
Ideal charger for multi-shift
operation or centrally located
equipment rooms where spare
batteries are always required.
They can accommodate up to
6 batteries at once.
NTN1177D Multi-Unit, rapid
rate, 110V (not for Lithium-ion)
NTN1178D Multi-Unit, rapid
rate, 220V (not for Lithium-ion)
NTN1179D Multi-Unit, rapid
rate, 240V (not for Lithium-ion)
Chargers
Motorola Conditioning Charger
The MCC will help extend battery life and enhance battery operation.
It will safely condition and charge your specified Nickel Cadmium
(NiCd) and Nickel Metal Hydride (NiMH) batteries in approximately
an hour.
WPLN4086CR MCC
Kit, 110V AC; includes
both base unit and
7V adapter
WPLN4087CR MCC
Kit, 220V AC; includes
both base unit and
7V adapter
WPPN4021CR 7 Volt
Adapter plate only
WPPN4065BR Multi-Unit
Conditioning Charger Four-station
Base, 110V; (order adapter plates separately)
3080384G15 Cigarette Lighter Adapter Cord
RLN4814A Vehicular Mounting
Bracket for single unit Motorola
Conditioning Charger
3080384M21 DC Hard Wire Cable,
for vehicular installation (included
in RLN4814A)
3060665A04 120V
Interchangeable line cord
NTN1177D
WPPN4065BR
Shown With Optional
Adapter Plates
RLN4814A
8/03
Portable
Accessories
XTS3000/XTS3500 Series
Chargers
Battery Maintenance System
plus
(BMS
plus
)
Increase the useful life of your batteries.
Using interchangeable battery adapters (sold separately), the BMS
plus
is capable of charging and discharging, analyzing, conditioning and
cycle test on batteries; tracking battery voltage and capacity (mAh).
The BMS
plus
offers a 3 year warranty. Its easy-to-use design supports
hundreds of 2-way, cellular and camcorder batteries with printer
port* (Serial-RS-232C port – uses female 9-pin to male 25-pin cable).
WPLN4079BR Six-Station, 110V AC, 50/60 Hz
WPLN4080BR Six-Station, 230V AC, 50/60 Hz
WPPN4085AR BMS
plus
field Upgrade Kit for WPLN4079AR,
WPLN4080AR and WPLN4081AR; allows these units to support
Li-ion battery chemistries
NDN4005B Three-Station, 110V AC 50/60 Hz (does not support
Li-ion or 3-cell batteries)
NDN4006B Three-Station, 230V AC 50/60 Hz (does not support
Li-ion or 3-cell batteries)
BMS
plus
Adapters
WPPN4019AR Adapter, NiCd only
WPPN4022AR Adapter, NiCd and NiMH
WPPN4086AR Adapter;NiCd, NiMH and Li-ion
* Compatible with the STAR Micronics SP200 series printers, available from any STAR
Micronics distributor, and other printers with STAR emulation.
Chargers
Battery Optimizing System II (BOS II)
No other battery analyzer
matches the speed,
accuracy, and versatility of
the Battery Optimizing
System II. Ideal for large
fleet, public safety, and all
other users who rely on their
battery performance. Now
with increased power, more
sophisticated programming
options, and easier to use
navigation paths, optimizing
your batteries was never
easier. Key features include:
• Support for NiCd, NiMH, Li-ion, and SLA batteries
• 100 watt power supply and programmable from 100 mAH to
4 amps per station
• Interchangeable adapters accomodate all major brands
• Includes a variety of user programs and allows for
customizable programming
• Proprietary recondition cycle restores NiCd and NiMH batteries
• Increased processing power and testing resolution – including
a three minute Quicktest that measures the batteries State of
Health (SoH)
• Printer output for reports and labels
• Three year warranty
WPLN4124AR BOS II, Four-Station, 100-240V AC (US line cord)
WPLN4125AR BOS II, Four-Station, 100-240V AC (UK/Euro line cords)
BOS II Adapter
RL-75765 Adapter, XTS3000
WPLN4079BR
WPLN4124AR
8/03
Portable
Accessories
XTS3000/XTS3500 Series
Chargers
impress™ Bundle Packs
Provide significant savings on the impress™ products by bundling a
charger and batteries together as a Smart Energy System package.
RLN5263A impress Charger with two HNN9031AR batteries
RLN5262A impress Charger with two HNN9023AR batteries
RLN5441B impress Multi-Unit Charger with six HNN9032AR batteries
RLN5443B impress Multi-Unit Charger with six HNN9031AR batteries
RLN5486A impres Single-Unit Charger Bundle Includes 1 WPLN4111
impress charger and 2 NNTN4436AR Intrinsically Safe (FM)
batteries. For XTS3000, XTS3500 and XTS5000 Two-way radios.
RLN5487A impres Single-Unit Charger Bundle Includes 1 WPLN4111
impress charger and 2 NNTN4437AR ruggedized batteries. For
XTS3000, XTS3500 and XTS5000 Two-way radios.
RLN5489B impres multi-bundle XTS 1800 NiMH; Intrinsically Safe
(Only with applicable Intrinsically Safe products)
RLN5490B impres multi-bundle XTS 1800 NiMH; Intrinsically Safe
(Only with applicable Intrinsically Safe products)
impres™ Smart Energy System
The impres™ smart energy system ensures
maximum talk-time and optimized battery
cycle life through the use of its advanced
charging algorithm and automatic
reconditioning features. The smart energy
system reconditions impres batteries when
they need it automatically, keeping them in
peak condition. It's advanced conditioning
features allow batteries to be safely left on
the charger for extended periods of time without incurring the
damaging heat build-up which can rob batteries of cycle life. In
addition, batteries left on the charger are kept fully charged so they
are always ready when you need them. The impres system
reconditions batteries when they need it based on their usage
pattern. Talk time and cycle life are optimized and the need for
manual maintenance programs reduced or eliminated. This rapid-rate
tri-chemistry charging system will also charge existing legacy
batteries and supports multiple radio platforms including Saber, XTS,
and HT1000 series portables.
WPLN4111AR impres Smart Energy System Charger
WPLN4108BR impres Smart Energy System Multi-Unit Charger
Chargers
impres™ Multi-Unit Charger with Display Modules
The impres Multi-Unit Charger with Charger Display Modules has a
two-line LCD screen for each of its six charger pockets that provides
users with a host of valuable battery information. When a calibrated
impres battery is inserted into a pocket, it provides the current
battery mAh and percent of rated capacity which allows the user to
immediately know the status of the battery without having to charge
and discharge the battery. Additionally, the unit displays the
remaining charge time (NiCd and NiMH only) which lets the user
know when the impres battery will be ready for use. Additional
information displayed includes: battery serial and part number
information, battery chemistry,
voltage, charge status and the
version of the charger and
display modules.
WPLN4130AR Multi-Unit
Charger with Display Modules
RLN5382A Charger Display
Module for impres multi-unit
charger version 1.3 or later
RLN5591A Charger Display
Module for impres multi-unit charger version 1.2 or earlier
(Requires unit to be sent to the Rockford Service Center – instruction
sheet provided)
Vehicular Charger
This vehicular charger is a 12V DC that supports nickel cadmium
(NiCd), nickel metal hydride (NiMH), and Lithium Ion (Li-ion) batteries
for XTS3000, XTS3500 and XTS5000. A microprocessor senses the
type of battery installed and controls the rate of charge accordingly.
Batteries are charged at a rapid rate until fully charged at which
point the unit reverts to a trickle charge. Batteries can be charged
while on the radio or stand alone. The radio can be operated while
in the charger and this unit is PAC RT compatible. The vehicular
charger consists of a console, mounting hardware, and a
supply cable.
NTN9176B Vehicular Charger
WPLN4111AR
NTN9176B
WPLN4130AR
8/03
Portable
Accessories
XTS3000/XTS3500 Series
Chargers
Travel Charger
This compact Travel
Charger mounts inside a
vehicle for convenient
battery charging
throughout the workday,
helping to assure users
that they will never be out
of touch due to lack of
power. It has a voltageregulated lighter adapter
that plugs into the vehicle’s socket, and includes a mounting bracket
with nylon strap to hold the Two-way radio in place. Designed to
charge batteries on or off the radio; users can use their radio while
charging. A maintenance mode keeps batteries charged without
damaging heat buildup, and the charging algorithm provides for cool
charging of the battery. A recharge mode rapid charges batteries to
compensate for capacity loss caused when radios are kept in receive
or transmit mode.
RLN4884B Travel charger
Vehicular Adapters
Allows customers to adapt XTS3000, XTS3500 and XTS5000
portables for mobile operation. Provides in-vehicle rapid and trickle
charging for nickel cadmium (NiCd), nickel metal hydride (NiMH), and
Lithium-ion (Li-ion) batteries. These units offer quick radio release
and dead battery operation and are powered by attaching their
supply cable to the 12V battery inside a police car, utility truck or
other vehicle. Connectors are provided for the vehicle antenna,
mobile microphone and optional amplified loudspeaker (HSN1000B).
There is also a general interface connector for additional
accessories. A color LED indicates battery recharge status. For XTVA
operation, a microphone and RF switch (NTN8327A) are required.
The required mobile microphone and optional loudspeaker allow for
operation of the portable radio that is similar to that of a mobile.
NTN8561E XTS Vehicular Adapter, Closed Face, Mini-UHF
NTN8560E XTS Vehicular Adapter, Open Face with limited keypad
access, Mini-UHF
NTN1607E XTS Vehicular Adapter, Closed Face, BNC
NTN1606E XTS Vehicular Adapter, Open Face with limited keypad
access, BNC
Chargers
Adding accessories to the vehicular adapters requires one of the
following two kits:
NTN8941A XTVA Data Cable Kit
NTN8943A XTVA Accessory Adapter Kit
Additional Accessories for the Vehicular Adapters
HMN4069E Standard White Palm Microphone
PLN7737B Hand Held Control Head
NTN8940B Trunnion (Required)
HSN1000B External Speaker Amplified, 6 Watts
HLN9330B Emergency Foot Switch
GLN7280A Emergency Pushbutton
6685687A01 Tool Wrench for RF Switch (Required)
NTN8327A RF Adapter (Required)
NKN6455A MTVA PA/Speaker Cable
RLN4884A
Loading...