MOTOROLA (M) Logo
DIGITAL WIRELESS TELEPHONE
USER'S GUIDE
Part No. 6809462A15-O
NOTICE
Motorola strives to make all our products accessible to as many
people as possible. Some features may not be accessible to everyone.
You may find that this phone has some features that are impractical
for people who are blind or visually impaired. We welcome your comments
about the accessibility of our products. Call Customer Care
1-800-331-6456, extension 255.
Transcribed by
Horizons for the Blind, Inc.
2 N. Williams St.
Crystal Lake IL 60014
(815) 444-8800 Voice/TDD
(815) 444-8830 FAX
E-mail:
mail@horizons-blind.org
Web: horizons-blind.org
2003
1
###1 WELCOME
Welcome to the world of Motorola digital wireless communications!
Motorola is a global leader in communications technology. We are
pleased that you have chosen the Motorola V60x wireless phone.
KNOW YOUR PHONE
Before you start to use your phone, take time to examine it. The
phone is basically a rectangle with an antenna on the end and an external
display space located in the upper portion of the case. See page 27
for more information on this display.
Now, place the phone on a flat surface with the antenna at the
top right, and look over the outside of the case.
THE OUTSIDE
Headset Jack: You will find the Headset jack along the top edge
of the case, at the opposite end from the antenna. Insert headset
accessory here for hands-free use.
Volume Keys: Continue following the case around the left edge
and you will find the Volume keys. These keys adjust earpiece and ringer
volume.
Smart Key: The button under the Volume keys is the Smart key.
This key will select menu items, send and end calls.
Status Light: This visual feature is located on the right front
corner of the case. The light indicates incoming call and service
status.
Voice Key: The voice key may be found at the top of the right
side edge. This key will allow you to make and use voice recording.
Accessory Connector Port: This port is found at the bottom edge
of the case. Insert charger and phone accessories here.
THE INSIDE
The face of the phone is protected by a flip cover that is raised
for use. The flip lid opens to a slight angle with the lower case.
Earpiece: When the flip is open, the earpiece is found at the
top edge.
Display: The display area is located under the earpiece.
The lower half of the case holds the major function areas for
operating your phone.
You will find a set of three keys beneath the hinge of the flip.
The center key is the MENU key and the right and left keys are the
Right and Left "soft" keys.
--Left Soft Key: Perform functions identified by left display
prompt.
--Right Soft Key: Perform functions identified by right display
prompt.
--MENU: The center key of the set described, this key will be
identified in this manual as M.
END key: This key is located under the Left soft key. It will
end phone calls and exit the menu system.
SEND key: This key is located under the Right Soft key. It will
2
send and answer calls, and display recent dialed calls list.
Scroll Key: This rocker key is found under the MENU key. It
consists of an upper or lower section, and is used to move through
menus and lists.
The bottom half of the phone face is a standard alphanumeric
keypad. From the top to the bottom, and left to right, these keys are
arranged as follows:
Microphone: The microphone is found under the Pound key.
Power Key: The Power key is found under the Star key. This key
will be identified in this manual as PWR.
3
###2 Personal Communications Sector
600 North U.S. Highway 45
Libertyville, Illinois 60048
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States)
1-800-461-4575 (Canada)
www.motorola.com (United States)
www.motorola.ca (Canada)
MOTOROLA and the Stylized M Logo are registered in the US Patent
& Trademark Office. TrueSync, Sidekick, Starfish and the Stylized
Starfish Logo are registered trademarks of Starfish Software, Inc.,
a wholly owned independent subsidiary of Motorola, Inc. All other
product or service names are the property of their respective owners.
(c) Motorola, Inc. 2003.
SOFTWARE COPYRIGHT NOTICE
The Motorola products described in this manual may include
copyrighted Motorola and third party software stored in semiconductor
memories or other media. Laws in the United States and other countries
preserve for Motorola and third party software providers certain
exclusive rights for copyrighted software, such as the exclusive rights
to distribute or reproduce the copyrighted software. Accordingly, any
copyrighted software contained in the Motorola products may not be
modified, reverse-engineered, distributed, or reproduced in any manner
to the extent allowed by law. Furthermore, the purchase of the Motorola
products shall not be deemed to grant either directly or by implication,
estoppel, or otherwise, any license under the copyrights, patents,
or patent applications of Motorola or any third party software provider,
except for the normal, non-exclusive, royalty-free license to use that
arises by operation of law in the sale of a product.
Manual number: 6809462A15-O
4
###3 MAIN MENU
PHONEBOOK
RECENT CALLS
--Received Calls
--Dialed Calls
--Notepad
--Call Times
MESSAGES
--Voicemail
--Create Message
--Inbox
--Outbox
--Quick Notes
--Drafts
--Browser Alerts
RADIO (available only if car accessories are attached)
BROWSER
SETTINGS (See details on page 4)
RING STYLES
--Style
--
Style
Detail
--My Tones
PICTURE VIEWER
SHORTCUTS
CALCULATOR
DATEBOOK
VOICE RECORD
BREW (Your service provider may rename the Brew feature.)
SHORTCUTS
Change display text zoom: Press M, then press and hold M.
Display my phone number: Press M; Pound key.
Dial voicemail number: Press and hold 1.
Go to dialed calls list: Press SEND.
Exit menu system: Press END. ###4 SETTINGS MENU
RING STYLES
--Style
--Style Detail
--My Tones
PHONE STATUS
--My Tel. Number
--Active Line
--Battery Meter
--Other Information
BROWSER
CONNECTION
--Incoming Call
IN-CALL SETUP
--In-Call Timer
--Answer Options
SECURITY
5
--Phone Lock
--Lock Application
--Restrict Calls
--New Passwords
LOCATION
OTHER SETTINGS
--Personalize
Main Menu
Keys
Greeting
Screen Saver
Banner
--Initial Setup
Time and Date
Auto PIN Dial
Auto Redial
Backlight
Status Light
Zoom
TTY Setup
Scroll
Animation
Language
Contrast
DTMF
Master Reset
Master Clear
--Network
Current Network
Analog Only
Set Mode
Service Tone
Call Drop Tone
--Car Settings
Auto Answer
Auto Hands-Free
Power-Off Delay
Charger Time
--Headset
Auto Answer
NOTE: This is the standard menu layout. You or your service
provider may have modified the menu structure or changed some feature
names. Not all features may be available for all users.
For example, the Radio feature is displayed only when the FM Radio
Headset accessory is plugged into the accessory connector port on your
phone.
6
###5 CONTENTS
MENU MAP ............................................................ 3
ABOUT THIS GUIDE ................................................... 10
SAFETY AND GENERAL INFORMATION ...................................... 11
GETTING STARTED .................................................... 17
What's in the Box? .................................................. 17
Installing the Battery ............................................. 17
Charging the Battery ............................................... 18
Changing the Convertible Covers .................................... 19
Turning Your Phone On .............................................. 21
Making a Call ....................................................... 21
Ending a Call ....................................................... 22
Answering a Call ................................................... 22
Seeing Your Phone Number ........................................... 22
ABOUT YOUR PHONE .................................................... 23
Using the Display .................................................. 23
Zooming In and Out .................................................. 25
Using the Status Light ............................................. 25
This user guide introduces you to the many features in your
Motorola wireless phone.
NAVIGATING TO A MENU FEATURE
Use the menu system to access your phone's features. This guide
shows you how to select a menu feature as follows:
Find the Feature: M; Messages; Create Message
This example shows that you must press M, scroll to and select
Messages, then scroll to and select Create Message.
OPTIONAL FEATURES
OPTIONAL FEATURE: This label identifies an optional network or
subscription-dependent feature that may not be offered by all service
providers in all geographical areas. Contact your service provider
for more information.
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORY: This label identifies a feature that requires
an optional Motorola Original (TM) accessory. ###11 SAFETY AND
GENERAL INFORMATION
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS
INFORMATION BEFORE USING YOUR PHONE.
The information provided in this document supersedes the general
safety information in user guides published prior to December 1, 2002.
EXPOSURE TO RADIO FREQUENCY (RF) ENERGY
Your phone contains a transmitter and a receiver. When it is ON,
it receives and transmits RF energy. When you communicate with your
phone, the system handling your call controls the power level at which
your phone transmits.
Your Motorola phone is designed to comply with local regulatory
requirements in your country concerning exposure of human beings to
RF energy.
OPERATIONAL PRECAUTIONS
To assure optimal phone performance and make sure human exposure
to RF energy is within the guidelines set forth in the relevant
standards, always adhere to the following procedures.
EXTERNAL ANTENNA CARE
Use only the supplied or Motorola-approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage the
phone.
Do NOT hold the external antenna when the phone is IN USE. Holding
the external antenna affects call quality and may cause the phone to
operate at a higher power level than needed. In addition, use of
unauthorized antennas may result in non-compliance with the local
regulatory requirements in your country. ###12 PHONE OPERATION
When placing or receiving a phone call, hold your phone as you
11
would a wireline telephone.
BODY-WORN OPERATION
To maintain compliance with RF energy exposure guidelines, if
you wear a phone on your body when transmitting, always place the phone
in a Motorola-supplied or approved clip, holder, holster, case, or
body harness for this phone, if available. Use of accessories not
approved by Motorola may exceed RF energy exposure guidelines. If you
do not use one of the body-worn accessories approved or supplied by
Motorola, and are not using the phone held in the normal use position,
ensure the phone and its antenna are at least 1 inch (2.5 centimeters)
from your body when transmitting.
DATA OPERATION
When using any data feature of the phone, with or without an
accessory cable, position the phone and its antenna at least 1 inch
(2.5 centimeters) from your body.
APPROVED ACCESSORIES
Use of accessories not approved by Motorola, including but not
limited to batteries and antenna, may cause your phone to exceed RF
energy exposure guidelines. For a list of approved Motorola accessories,
visit our website at www.Motorola.com.
RF ENERGY INTERFERENCE/COMPATIBILITY
NOTE: Nearly every electronic device is susceptible to RF energy
interference from external sources if inadequately shielded, designed,
or otherwise configured for RF energy compatibility. In some
circumstances your phone may cause interference.
FACILITIES
Turn off your phone in any facility where posted notices instruct
you to do so. These facilities may include hospitals or health care
facilities that may be using equipment that is sensitive to external
RF energy. ###13 AIRCRAFT
When instructed to do so, turn off your phone when on board an
aircraft. Any use of a phone must be in accordance with applicable
regulations per airline crew instructions.
MEDICAL DEVICES
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
6 inches (15 centimeters) be maintained between a handheld wireless
phone and a pacemaker.
Persons with pacemakers should:
--ALWAYS keep the phone more than 6 inches (15 centimeters) from
your pacemaker when the phone is turned ON.
--NOT carry the phone in the breast pocket.
--Use the ear opposite the pacemaker to minimize the potential
for interference.
--Turn OFF the phone immediately if you have any reason to suspect
12
that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your hearing
aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately shielded
from RF energy. Your physician may be able to assist you in obtaining
this information.
USE WHILE DRIVING
Check the laws and regulations on the use of phones in the area
where you drive. Always obey them. ###14 When using your phone while
driving, please:
--Give full attention to driving and to the road.
--Use hands-free operation, if available.
--Pull off the road and park before making or answering a call
if driving conditions so require.
Responsible driving best practices may be found in the "Wireless
Phone Safety Tips" at the end of this manual and at the Motorola website:
www.Motorola.com/callsmart.
OPERATIONAL WARNINGS
FOR VEHICLES WITH AN AIR BAG
Do not place a phone in the area over an air bag or in the air
bag deployment area. Air bags inflate with great force. If a phone
is placed in the air bag deployment area and the air bag inflates,
the phone may be propelled with great force and cause serious injury
to occupants of the vehicle.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn off your phone prior to entering any area with a potentially
explosive atmosphere, unless it is a phone type especially qualified
for use in such areas and certified as "Intrinsically Safe." Do not
remove, install, or charge batteries in such areas. Sparks in a
potentially explosive atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
NOTE: The areas with potentially explosive atmospheres referred
to above include fueling areas such as below decks on boats, fuel or
chemical transfer or storage facilities, areas where the air contains
chemicals or particles, such as grain, dust, or metal powders. Areas
with potentially explosive atmospheres are often but not always posted.
###15 BLASTING CAPS AND AREAS
To avoid possible interference with blasting operations, turn
OFF your phone when you are near electrical blasting caps, in a blasting
area, or in areas posted "Turn off electronic devices." Obey all signs
and instructions.
13
BATTERIES
Batteries can cause property damage and/or bodily injury such
as burns if a conductive material such as jewelry, keys, or beaded
chains touch exposed terminals. The conductive material may complete
an electrical circuit (short circuit) and become quite hot. Exercise
care in handling any charged battery, particularly when placing it
inside a pocket, purse, or other container with metal objects. Use
only Motorola original batteries and chargers.
Your battery or phone may contain symbols, defined as follows:
NOTE: See original print edition for icons associated with the
following definitions:
--Important safety information will follow.
--Your battery or phone should not be disposed of in a fire.
--Your battery or phone may require recycling in accordance with
local laws. Contact your local regulatory authorities for more
information.
--Your battery or phone should not be thrown in the trash.
--Your phone contains an internal lithium ion battery.
SEIZURES/BLACKOUTS
Some people may be susceptible to epileptic seizures or blackouts
when exposed to blinking lights, such as when watching television or
playing video games. These seizures or blackouts may occur even if
a person never had a previous seizure or blackout. ###16 If you have
experienced seizures or blackouts, or if you have a family history
of such occurrences, please consult with your doctor before playing
video games on your phone or enabling a blinking-lights feature on
your phone. (The blinking-light feature is not available on all
products.)
Parents should monitor their children's use of video game or other
features that incorporate blinking lights on the phones. All persons
should discontinue use and consult a doctor if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of awareness,
involuntary movements, or disorientation.
To limit the likelihood of such symptoms, please take the
following safety precautions:
--Do not play or use a blinking-lights feature if you are tired
or need sleep.
--Take a minimum of a 15-minute break hourly.
--Play in a room in which all lights are on.
--Play at the farthest distance possible from the screen.
Repetitive Motion Injuries
When you play games on your phone, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of
your body. Follow these instructions to avoid problems such as
tendonitis, carpal tunnel syndrome, or other musculoskeletal
disorders:
--Take a minimum 15-minute break every hour of game playing.
--If your hands, wrists, or arms become tired or sore while
playing, stop and rest for several hours before playing again.
--If you continue to have sore hands, wrists, or arms during or
14
after play, stop playing and see a doctor.
15
###17 GETTING STARTED
WHAT'S IN THE BOX?
Your wireless phone typically comes equipped with a battery and
a charger. Other accessory options can customize your phone for maximum
performance and portability.
To purchase Motorola Original (TM) accessories, contact the
Motorola Customer Call Center at 1-800-331-6456 in the United States
or 1-800-461-4575 in Canada.
INSTALLING THE BATTERY
You must install and charge the battery to use your phone.
Your phone is designed to be used only with Motorola Original
batteries and accessories. We recommend that you store batteries in
their protective cases when not in use.
Do This
1. Remove the battery from its protective clear plastic case.
2. If necessary, push down the battery door release latch and
lift the door off of the phone. ###18 3. Insert the battery,
printed arrow first, under the tab at the top of the battery compartment
and push down.
4. Insert the ridge at the bottom of the battery door into the
base of the phone, then push the door down and snap it into place.
CHARGING THE BATTERY
New batteries are shipped partially charged. Before you can use
your phone, you need to install and charge the battery, as indicated
by the following instructions. Some batteries perform best after
several full charge/discharge cycles.
Do This
1. Plug the travel charger into your phone with the release tab
facing up. ###19 2. Plug the other end of the travel charger into
the appropriate electrical outlet.
3. When your phone indicates that the battery is fully charged
(Charge Complete), press the release tab and remove the travel charger.
NOTE: When you charge the battery, the battery level indicator
in the upper right corner of the display flashes and shows how much
of the charging process is complete.
CHANGING THE CONVERTIBLE COVERS
You can replace the flip cover and battery cover on your phone
to personalize its appearance. Matching front and back cover sets are
available in a variety of colors and designs.
Your phone is designed to be used only with Motorola Original
accessories. See your Motorola retailer for these convertible covers.
###20 REMOVE A FLIP COVER
Do This
1. Open your flip phone half way.
2. Press in the tiny silver release button with your fingernail.
This button is on the side of the top half of the phone.
16
3. While pressing the silver button in, slide the cover off the
phone.
ATTACH A FLIP COVER
Do This
1. Close your flip phone.
2. Line up the ridges on each side of the cover so that they align
with the slots on the phone.
3. Slide the cover onto the phone until it snaps into place. ###21
TURNING YOUR PHONE ON
Do This: To
1. Open your phone: expose the keypad
2. Press and hold PWR for three seconds: turn on your phone
3. If necessary, enter your four-digit unlock code and press OK
(Right soft key): unlock your phone
The unlock code is originally set to 1234. Your service provider
may change this number before you receive your phone.
MAKING A CALL
Do This: To
1. Press the keypad keys: dial the phone number
TIP: If you make a mistake, press DELETE (Left soft key) to delete
the last digit, or press and hold DELETE (Left soft key) to clear all
digits.
2. Press SEND: make the call ###22 ENDING A CALL
Press: To
END: end the call
ANSWERING A CALL
When you receive a call, your phone rings and/or vibrates and
displays an incoming call message.
Press: To
SEND or ANSWER (Right soft key): answer the call
TIP: If your phone is locked, you must unlock it to answer the
call.
SEEING YOUR PHONE NUMBER
Press: To
M; Pound key: see your phone number
17
###23 ABOUT YOUR PHONE
See page 1 for a basic phone description.
USING THE DISPLAY
The
idle display
see when you are
(described below) is the standard display you
on a call or using the menu.
not
Labels at the bottom corners of the display show the current soft
key functions. A menu indicator at the bottom center of the display
indicates that you can press M to enter the main menu. ###24
Display features:
1. Signal Strength Indicator: Vertical bars show the strength
of the network connection. You cannot make or receive calls when the
no signal indicator is displayed.
2. Digital or Analog Signal Indicator (OPTIONAL FEATURE): Shows
whether you are receiving a digital or analog signal.
3. In Use Indicator: Shows that a call is in progress.
4. Roam Indicator (OPTIONAL FEATURE): Shows that your phone is
seeking or using another network system outside your home network.
5. Location Information Indicator (OPTIONAL FEATURE): Indicates
when your Location Information is available or unavailable.
6. Message Waiting Indicator (OPTIONAL FEATURE): Appears when
you receive a voicemail or text message.
7. Battery Level Indicator: Vertical bars show the battery charge
level. Recharge the battery when you see
Low Battery
and hear the low
battery alert.
8. Active Line Indicator (OPTIONAL FEATURE): Shows the current
active phone line.
9. Menu Indicator: Indicates that you can press M to enter the
main menu or open a feature sub-menu. ###25 10. Ring Style
Indicator: Shows the ring style setting.
NOTE: See original print edition for icons associated with the
following styles:
--loud ring
--soft ring
--vibrate
--vibrate and ring
--silent
ZOOMING IN AND OUT
Press and release M, then press and hold M to zoom the text in
and out on the display. Zoom in to increase text size, zoom out to
display more information.
You can also zoom in and out from the menu. See page 59.
USING THE STATUS LIGHT
The status light shows when you have an incoming call or message,
or when your phone is roaming (using a non-home system).
Indication: Status
alternating red/green: incoming call
flashing green: in service, home system
flashing yellow: roaming, non-home system
18
flashing red: no service ###26 The status light initially is
turned off to extend battery life. To turn it on, see "Initial Setup"
on page 58.
NOTE: Turning on the status light will substantially reduce your
phone's standby time, the length of time that your phone's battery
retains power when the phone is turned on but is not in use.
ADJUSTING VOLUME
Press the up and down volume keys to:
--increase and decrease earpiece volume during a call
--increase and decrease the ringer volume setting when the idle
display is visible (flip must be open)
TIP: At the lowest volume setting, press the down volume key to
switch to silent alert. Press the up to reset ring alert.
--turn off an incoming call alert
USING THE SMART KEY
The smart key gives you another way to perform many basic phone
functions. It anticipates the next action you are likely to perform.
For example, when you highlight a menu item, you can press the smart
key to select it. You can use the smart key to make and end calls,
toggle features on and off, and open your phonebook. The smart key
usually performs the same function as the right soft key (Right soft
key). ###27 NOTE: The smart key provides an optional way to do
some things faster. It is never the only way to perform a task.
USING THE EXTERNAL DISPLAY
When the flip is closed, the external display shows the time and
date. It also displays messages to notify you of incoming calls and
other events. You can perform the following functions in the external
display.
SET PHONE RING STYLE
Press: To
1. volume keys: scroll to Style
2. smart key: select a ring style
3. volume keys: return to the idle display
RETURN AN UNANSWERED CALL
Your phone keeps a record of your unanswered calls and displays
X Missed Calls
in the external display.
Press: To
1. smart key: see the received calls list
2. volume keys: scroll through the list and select a call to return
3. smart key: make the call ###28 NOTE: Because the
microphone and earpiece are unavailable when the phone is closed, you
must use a headset or other hands-free device with this feature.
BATTERY USE
Battery performance depends on many factors, including your
wireless carrier's network configuration; signal strength; the
19
temperature at which you operate your phone; the features and/or
settings you select and use; and your voice, data, and other application
usage patterns.
BATTERY CARE
CAUTION: To prevent injuries or burns, do not allow metal objects
to contact or short-circuit the battery terminals.
To maximize your battery's performance:
--Always use Motorola Original (TM) batteries and battery
chargers. The phone warranty does not cover damage caused from using
non-Motorola batteries and/or battery chargers.
--New batteries or batteries that have been stored for long
periods of time may require a longer charge time.
--Maintain the battery at or near room temperature when charging.
###29 --Do not expose batteries to temperatures below -10 degrees C
(14 degrees F) or above 45 degrees C (113 degrees F). Always take your
phone with you when you leave your vehicle.
--When you do not intend to use a battery for a while, store it
uncharged in a cool, dark, dry place, such as a refrigerator.
--Over extended periods of time, batteries gradually wear down
and require longer charging times. This is normal. If you charge your
battery regularly and notice a decrease in talk time or an increase
in charging time, then it is probably time to purchase a new battery.
RECYCLE ICON: The rechargeable batteries that power this product
must be disposed of properly and may need to be recycled. Refer to
your battery's label for battery type. Contact your local recycling
center for proper disposal methods. Never dispose of batteries in a
fire because they may explode.
20
###30 MAKING AND ANSWERING CALLS
For basic instructions on how to make a call, end a call, and
answer a call, see pages 21-22.
REDIALING A NUMBER
If you hear an ordinary busy signal:
Press: To
1. END: hang up
2. SEND: redial the busy number
USING AUTOMATIC REDIAL
If the network is busy, you hear a fast busy signal, and your
phone displays
Call Failed
.
With automatic redial, your phone automatically redials the
number for four minutes. When the call goes through, your phone rings
or vibrates one time, displays
Redial Successful
, and then connects
the call.
You must turn on automatic redial to use the feature. See the
"Auto Redial" option on page 59. ###31 When automatic redial is
turned off, you can manually activate the feature to redial a phone
number. When you hear a fast busy signal and see
Call Failed
:
Press: To
SEND or RETRY (Right soft key): activate automatic redial
USING CALLER ID
(OPTIONAL FEATURE)
Calling line identification (caller ID) displays the phone number
for incoming calls.
The phone displays the caller's name when the name is stored in
your phonebook, or
Incoming Call
when caller ID information is not
available.
RETURNING AN UNANSWERED CALL
Your phone keeps a record of your unanswered calls, and displays:
--the missed call indicator
--X Missed Calls Y Unknown, where X is the total number of missed
calls and Y is the number of missed calls with no caller ID information
Press: To
1. VIEW (Right soft key): see the received calls list
2. Scroll key: select a call to return
3. SEND: make the call ###32 CALLING AN EMERGENCY NUMBER
Your service provider programs one or more emergency phone numbers,
such as 911, that you can call under any circumstances, even when your
phone is locked.
NOTE: Emergency numbers vary by country. Your phone's
pre-programmed emergency number(s) may not work in all locations, and
sometimes an emergency call cannot be placed due to network,
environmental, or interference issues.
Press: To
21
1. keypad keys: dial the emergency number
2. SEND: call the emergency number
TURNING OFF A CALL ALERT
You can turn off your phone's incoming call alert before answering
the call.
Press: To
either volume key: turn off the alert
CANCELING AN INCOMING CALL
While the phone is ringing or vibrating:
Press: To
END or IGNORE (Left soft key): cancel the incoming call ###33
--(OPTIONAL FEATURE)
Depending on your phone settings and/or service subscription,
the call may be forwarded to voice mail, another number, or the caller
may hear a busy signal.
CALLING WITH SPEED DIAL
Each entry you store in your phonebook is assigned a unique speed
dial number. To speed dial a phonebook entry:
Press: To
1. keypad keys: enter the speed dial number for the entry you
want to call
2. Pound key: submit the number
NOTE (OPTIONAL FEATURE): Some networks let you skip this step
for speed dial numbers 1 through 99.
3. SEND: call the entry
CALLING WITH ONE-TOUCH DIAL
To call phonebook entries 1 through 9, just press and hold the
one-digit speed dial number for one second.
We recommend that you reserve phonebook entry 1 (speed dial number
1) for storing and dialing your voicemail number. In many cases, your
service provider has already done this for you. If necessary, see page
68 to store your voicemail number for one-touch dial access. ###34
CALLING A NUMBER IN A TEXT MESSAGE
(OPTIONAL FEATURE)
To call a phone number embedded in a text message that you receive,
highlight or open the message and then:
Press: To
1. M: open the Inbox Menu
2. Scroll key: scroll to Call Back
3. SELECT (Right soft key): call the number
ADDITIONAL CALLING FEATURES
While dialing (with digits visible in the display), open the
Dialing Menu to perform the following tasks:
Press: To
--M; Attach Number: attach a number from the phonebook or recent
call lists
22
--M; Insert Pause: insert a pause character
For more information, see page 70.
--M; Insert Wait: insert a wait character
For more information, see page 70. ###35 --M; Insert `n':
insert an n (number) character
For more information, see page 70.
--M; Send Message: open a new text message with the number in
the To field
You can also call a number using these features:
Do This: To Call
--Press and release the voice key, then say a voice name: a
phonebook entry using voice dial
To record a voice name, see page 72.
--Press M; Recent Calls; Received Calls or Dialed Calls; entry
to call: a missed call, or recent received or dialed call
23
###36 USING FEATURES WHILE ON A CALL
USING CALL WAITING
(OPTIONAL FEATURE)
When you are on a call, an alert tone sounds to indicate that
you have received a second call.
Press: To
1. SEND or ANSWER (Right soft key): answer the new call
2. SEND: switch back to the first call
MAKING A THREE-WAY CALL
(OPTIONAL FEATURE)
During a call, you can call and connect a third party for a
three-way call. You cannot do this if you already have a call on hold.
Press: To
1. keypad keys: dial the third party's number
NOTE: Some networks may require you to press SEND first.
2. SEND: call the number ###37 3. SEND: connect the two calls
4. END: end the entire call
ADDITIONAL ON-CALL FEATURES
Press: To
MUTE (Right soft key) (if available) or M; Mute: mute the call
SPEAKER (Right soft key) (if available) or M; Spkrphone On:
activate an attached speakerphone during an active call
M; My Tel. Number: see your phone number
M; Send Tones: send a number to the network as DTMF tones, for
credit card or password calls
To activate DTMF tones, see the "DTMF" option on page 60.
M; TTY Mode: change to TTY mode to use your phone with a TTY device
M; Received Calls or Dialed Calls: view recent received or dialed
call numbers
M; Messages: view or send messages
M; Datebook: view datebook entries ###38 M; Location: view and
change the location transmission status of your phone
M; Other Information: view phone specifications
24
###39 USING THE MENU
NAVIGATING TO A FEATURE
Use these keys to move through the menu system:
LEFT SOFT KEY: Perform function shown in the lower left corner
of the display (usually EXIT or BACK).
MENU KEY: Enter the menu system, or open a sub-menu, when the
MENU icon appears in the bottom center of the display. (This key is
identified in this manual as M.)
VOLUME KEYS: Scroll up or down through menus and lists.
END KEY: Exit menu system without making changes, return to idle
display.
RIGHT SOFT KEY: Perform function shown in the lower right corner
of the display (usually SELECT the highlighted menu item)
SCROLL KEY: Scroll up or down through menus and lists. From idle
display, press up or down to open phonebook.
STAR AND POUND KEYS: Cycle through and set the value of the
highlighted menu item. ###40 SELECTING A FEATURE OPTION
Some features require you to select an item from a list:
(graphic display)
Press BACK (Left soft key) to go back to the previous screen.
Press M to open the sub-menu.
Press VIEW (Right soft key) to view details of the highlighted
item.
--Press Scroll key to scroll up or down to highlight the item
you want.
--In a numbered list, press a number key to highlight the item.
--In an alphabetized list, press a key multiple times to cycle
through the letters on the key and highlight the closest matching list
item. ###41 ENTERING FEATURE INFORMATION
Some features require you to enter information:
(graphic display)
Press Scroll key to scroll down to additional items.
Press CANCEL (Left soft key) to exit without making changes. DONE
(Left soft key) appears when you enter or edit information.
Press CHANGE (Right soft key) to edit the information.
--Enter numbers or text with the keypad.
--When an item has a list of possible values, press
Star or Pound key to scroll through and select a value.
--When an item has a list of possible values, press Scroll key
to the left or right to scroll through and select a value.
--When an item has a list of possible numeric values, press a
number key to set the value.
--If you enter or edit information and do not want to save your
changes, press END to exit without saving. ###42 The message
center lets you compose and send text messages. A
flashing cursor
shows
where text will appear:
(graphic display)
Flashing cursor
indicates insertion point.
Press INSERT (Right soft key) to view and insert a quick note.
25
Press CANCEL (Left soft key) to exit without making changes.
Press M to open the sub-menu.
When you enter text using the standard tap method, the flashing
cursor changes to a block cursor, and the soft key functions change:
(graphic display)
Block cursor
indicates current highlighted character. After two
seconds, the block cursor reverts to a flashing cursor and moves to
the next position.
Press DELETE (Left soft key) to delete the character to the left
of the insertion point.
Press OK (Right soft key) to accept and store the text.
26
###43 ENTERING TEXT
Multiple text entry methods make it easy for you to enter names,
numbers, and messages on your phone.
CHOOSING A TEXT MODE
Press M from any text entry screen to select a text mode. The
symbol for the active mode appears at the top of the text entry screen:
iTAP: Let the phone predict each word as you enter it. See page
48.
Tap: Enter letters, numbers, and symbols by pressing a key one
or more times. See page 44.
Numeric: Enter numbers only.
Symbol: Enter symbols only. See page 47.
Browse: Browse your phonebook or recent call lists to select a
name or number.
NOTE: The text mode you select remains active until you change
it by selecting another mode. ###44 USING TAP METHOD
This is the standard mode for entering text on your phone.
Press M from any text entry screen and select the
Tap Method menu option.
Do This: To
1. Press a number key one or more times: select a letter, number,
or symbol shown in the "Character Chart" on page 46
2. Continue pressing number keys: enter the remaining characters
3. Press OK (Right soft key): store the text when you are finished
###45 GENERAL TEXT ENTRY RULES
Press a number key repeatedly to cycle through its characters.
See "Character Chart" on page 46.
Press a number key as many times as necessary to enter the desired
character at flashing cursor location.
Press Scroll key to Change letter in block cursor to
uppercase or lowercase.
Press and hold a number key to cycle between text and numeric
entry modes.
Move flashing cursor to the left or right in text message.
--If you do not press a key for two seconds, the character in
the block cursor is accepted, and the cursor moves to the next position.
--The first character of every sentence is capitalized. (Press
Scroll key down to force the character to lowercase while it is
highlighted by the block cursor). ###46 CHARACTER CHART
Use this chart as a guide for entering spaces, letters, numbers,
and symbols with the tap method.
1-key: Space, Period, 1, Question mark, Exclamation point, Comma,
"at" sign, Underscore, Ampersand, Tilde, Colon, Semicolon, Quotation
mark, Hyphen, Open parentheses, Close parentheses, Apostrophe, Opening
interrogation mark, Opening exclamation point, Percent sign, British
Pound-Sterling sign, Dollar sign, Yen sign, Currency symbol, Euro sign
2-ABC: a, b, c, 2, Acute a, Grave a, Circumflex a, Tilde a, Cedilla
c
27
3-DEF: d, e, f, 3, Acute e, Grave e, Circumflex e, Diaeresis e
4-GHI: g, h, i, 4, Acute i, Circumflex i, Diaeresis i
5-JKL: j, k, l, 5
6-MNO: m, n, o, 6, Tilde n, Acute o, Circumflex o, Tilde o
7-PQRS: p, q, r, s, 7
8-TUV: t, u, v, 8, Theta, Diaeresis u, Acute u, Grave u, Circumflex
u
9-WXYZ: w, x, y, z, 9
0-key: Plus sign, Minus sign, 0, Times sign, Asterisk, Slash,
Back slash, Open bracket, Close bracket, Equal sign, Greater than sign,
Less than sign, Number sign (Or Pound sign), Section mark
NOTE: This chart may not reflect the exact character set available
on your phone. ###47 USING SYMBOL MODE
Your phone provides an alternate way to enter symbol characters
in a message. Press M from any text entry screen and select the Symbol
menu option.
Do This: To
1. Press a number key one time: display its symbol options at
the bottom of the display
See "Symbol Chart" on page 47.
2. Press Star or Pound key or Press the number key multiple times:
highlight the symbol you want
3. Press SELECT (Right soft key): enter the symbol at the flashing
cursor location
SYMBOL CHART
Use this chart as a guide for entering characters in symbol mode.
1-key: Space, Period, 1, Question mark, Exclamation point, Comma,
"at" sign, Underscore, Ampersand, Tilde, Colon, Semicolon, Quotation
mark, Hyphen, Open parentheses, Close parentheses, Apostrophe, Opening
interrogation mark, Opening exclamation point, Percent sign, British
Pound-Sterling sign, Dollar sign, Yen sign, Currency symbol, Euro sign
2-ABC: "At" sign, Underscore, Back slash, Alpha, Beta
3-DEF: Forward slash, Colon, Semi-colon, Delta, Phi
4-GHI: Quotation mark, Ampersand, Apostrophe, Gamma ###48
5-JKL: Open parentheses, Close parentheses, Open bracket, Close
bracket, Open brace, close brace, Lambda
6-MNO: Opening interrogation sign, Opening exclamation sign,
Tilde, Omega
7-PQRS: Less-than sign, Greater-than sign, Equal sign, Pi, German
double-s, Sigma
8-TUV: Dollar sign, British pound sterling sign, Yen sign,
Currency symbol, Euro sign, Theta
9-WXYZ: Pound sign, Percent sign, Asterisk, Xi, Psi
0-key: Plus sign, Minus sign, 0, Times sign, Asterisk, Slash,
Back slash, Open bracket, Close bracket, Equal sign, Greater than sign,
Less than sign, Number sign (Or Pound sign), Section mark
28
USING iTAP (tm) SOFTWARE PREDICTIVE TEXT ENTRY METHOD
iTAP (tm) software provides a predictive text entry method that
lets you enter a word using only one keypress per letter.
Press M from any text entry screen and select the
menu option.
iTAP
NOTE: You can switch languages within a message in iTAP text mode.
Press M to select the text mode and language you want to use.
ENTER WORDS
Do This: To
1. Press a number key one time: enter the first letter of the
word
The letters associated with the key are shown at the bottom of
the display. ###49 2. Press number keys (one per letter): enter the
rest of the word
Alternative words and letter combinations are shown at the bottom
of the display. The word choices are updated with each keypress.
3. Press Star or Pound key: highlight the word you want
4. Press SELECT (Right soft key): enter the word at the flashing
cursor location
A space is automatically inserted after the word.
For example, to spell the word "art," press 2, 7, 8. The display
shows:
--Flashing cursor indicates insertion point.
--Press DELETE (LEFT soft key) to clear the last letter.
--Press Scroll key to scroll to and display additional word
choices.
--Press SELECT (Right soft key) to insert the highlighted word.
###50 Enter Novel Words:
You may enter a word that the iTAP software does not recognize.
If the word you want is not displayed:
Do This: To
1. Press DELETE (LEFT soft key) one or more times: delete letters
until you see a letter combination that matches the start of the word.
2. Press Star or Pound key: highlight the letter or letter
combination.
3. Press SELECT (Right soft key), then press Star key: shift the
text entry cursor to the left and "lock" the selected word portion.
4. Continue: enter letters and highlight letter combinations:
spell the word.
Punctuation:
Press: To
Press 0 or 1: enter punctuation or other characters as shown in the
"Character Chart" on page 46 ###51 Capitalization:
The first word of a sentence is automatically capitalized, with
following words in lowercase.
Press: To
Press Scroll key up or down: change the words to initial character
capitalized, all uppercase characters, or all lowercase characters.
29
Enter Numbers:
Do This: To
1. Enter the first digit and then highlight it: put the iTAP
software in number entry mode.
2. Press number keys: add digits to the number.
3. Press SELECT (Right soft key): enter the number at the flashing
cursor location.
Delete Letters and Words:
Place the cursor to the right of the text that you want delete,
and then do the following:
Press DELETE (LEFT soft key): delete one letter at a time.
Press and hold DELETE (LEFT soft key) to delete the entire
message.
30
###52 MENU FEATURE DESCRIPTIONS
This chapter describes all of your phone's features in order of
the menu map shown on page 3.
MAIN MENU
PHONEBOOK: M; Phonebook
Store names and numbers as entire phonebook, then call numbers
by selecting them from the phonebook list. See page 67
RECENT CALLS:
Received Calls: M; Recent Calls; Received Calls
View a list of recently received calls. See page 63.
Dialed Calls: M; Recent Calls; Dialed Calls
View a list of recently dialed calls. See page 63.
Notepad: M; Recent Calls; Notepad
Call or store the last number entered on the keypad. See page
64.
Call Times (OPTIONAL FEATURE): M; Recent Calls; Call Times
View call timers that track time spent on your last call, dialed
calls, received calls, all calls since reset, and all calls total.
See page 65. ###53 MESSAGES (OPTIONAL FEATURE): M; Messages
Adjust message settings, view and manage the various types of
messages your phone can receive and/or send:
Voicemail: Listen to your recorded voice messages. See page 87.
Create Message: Create new text messages. See page 95.
Inbox: Read and manage text messages. See page 90.
Outbox: View all outgoing text messages, delivered and
undelivered.
Quick Notes: Select and send pre-written messages from the quick
notes list. See page 98.
Drafts: Store and edit text messages that you have written but
not sent.
BROWSER (OPTIONAL FEATURE): M; Browser
The micro-browser delivers WAP (Wireless Application Protocol)
pages from your service provider directly to your phone. See page 118.
###54 RING STYLES: M; Ring Styles
Select or edit the ring style your phone uses to notify you of
incoming calls, messages, or other events. See page 101.
PICTURE VIEWER: M; Picture Viewer
View and manage the pictures and animations stored on your phone.
See page 77.
SHORTCUTS: M; Shortcuts
Create keypad or voice shortcuts to menu features. See page 109.
CALCULATOR: M; Calculator
31
Use your phone as a calculator or currency converter. See page
120.
DATEBOOK: M; Datebook
Use the datebook calendar to schedule and review your appointments.
See page 79.
VOICE RECORD: M; Voice Record
Use the voice key to record messages and phone calls. See page
112.
NOTE: Recording phone calls is subject to varying state and
federal laws regarding privacy and recording of conversations.
RADIO (OPTIONAL ACCESSORY): M; Media Center; Radio
Listen to FM radio stations with the optional Motorola Original
(TM) FM Stereo Radio Headset accessory. This menu feature is displayed
only when the FM Stereo Radio Headset is plugged into the accessory
connector port on your phone. See page 84. ###55 BREW: M; Brew
You can download and launch games and applications on your phone.
See page 123.
NOTE: Your service provider may rename the Brew feature.
SETTINGS MENU
PHONE STATUS:
My Tel. Number M; Settings; Phone Status; My Tel. Number
View, enter, and edit information about your name and phone
number.
Active Line: M; Settings; Phone Status; Active Line
Change the active phone line to send and receive calls from either
of the available numbers.
Battery Meter: M; Settings; Phone Status; Battery Meter
View a detailed battery charge meter.
Other Information M; Settings; Phone Status; Other Information
View your phone's feature specifications (if available from the
service provider). ###56 CONNECTION (OPTIONAL ACCESSORY):
Connect your phone to a computer or hand-held device to send and
receive data and fax calls on the connected device.
Incoming Call: M; Settings; Other Settings; Connection; Incoming
Call
Specify the format for the next incoming call. You can select
Fax In Only, Data In Only, or Normal. See page 141.
IN-CALL SETUP
Set the features that are active during a call, such as the in-call
timer and call answering options.
In-Call Timer: M; Settings; In-Call Setup; In-Call Timer
32
Adjust call timer Display and Beep settings. You can set your
timer to beep at a selected interval during your calls. (60 seconds
is the default.) You can also turn on or off a display timer during
calls as follows:
Time: Display the elapsed time for the current call.
Off: No in-call timer display.
Answer Options: M; Settings; In-Call Setup; Answer Options
Turn call answering options on or off:
Multi-Key: Answer by pressing any key.
Open to Answer: Answer by opening the flip. ###57 SECURITY
Phone Lock: M; Settings; Security; Phone Lock
Lock and unlock your phone. See page 145.
Lock Application: M; Settings; Security; Lock Application
Lock and unlock specific phone applications (such as phonebook
or datebook). When an application is locked, users must enter the unlock
code to use the application.
Restrict Calls: M; Settings; Security; Restrict Calls
Restrict incoming and outgoing calls. See page 146.
New Passwords M; Settings; Security; New Passwords
Change your unlock code (originally set to 1234) or your security
code (originally set to 000000). See page 143.
LOCATION (OPTIONAL FEATURE): M; Settings; Location
If your phone has the automatic location information (ALI) feature,
it can tell the phone network where you are physically located. See
page 132. ###58 OTHER SETTINGS:
Personalize: M; Settings; Other Settings; Personalize
Set several personal phone options:
Main Menu: Change the order of the main menu. See page 130.
Keys: Change the functions of the soft keys and smart key in the
idle display. See page 130.
Greeting (OPTIONAL FEATURE): Change the text displayed when you
turn on your phone.
Screen Saver: Change your phone's screen saver image. See page
131.
Banner: Change the text that appears in the idle display.
NOTE: Banner text does not appear in your phone's external
display.
Initial Setup: M; Settings; Other Settings; Initial Setup
Set many basic phone options:
Time and Date: Set the phone's time and date. ###59 Auto PIN
Dial: Some networks require an authenticating PIN code to allow
outgoing calls. Use this feature to automatically dial your PIN.
Auto Redial: Use this option to turn on or turn off the automatic
33
redial feature. When you turn on automatic redial, your phone
automatically redials calls that fail due to busy network conditions.
See page 30.
Backlight: Set the amount of time that the display backlight
remains on, or turn off the backlight to conserve battery power.
Status Light: Turn the status light off (to conserve battery power)
and on.
Zoom: Switch between three lines (Zoom Out) and two lines (Zoom
In) of display text.
TTY Setup (OPTIONAL FEATURE): Set your phone to operate in one
of three TTY modes, or return to normal Voice mode. See page 133. ###60
Scroll: Force the cursor to stop or wrap around when it reaches
the top or bottom of a list in the display.
Animation: Turn animation off (to conserve battery power) or on.
Animation makes your phone's menus move smoothly as you scroll up and
down.
Language: Set the language for phone menus.
Contrast: Adjust the contrast setting for your display.
DTMF: Your phone can send a number to the network as dual tone
multi-frequency (DTMF) tones. DTMF tones are used to communicate with
automated systems that require you to enter a number such as a code,
password, or credit card number. Use this option to set DTMF tones
to be long, short, or off. ###61 Master Reset: Reset all options
back to their original factory settings except for the unlock code,
security code, and lifetime timer.
Master Clear: Reset all options back to their original factory
settings except for the unlock code, security code, and lifetime timer,
and clear all user settings and entries.
NOTE: This option erases all user-entered information stored in
your phone's memory, including phonebook and datebook entries. Once
you erase the information, it cannot be recovered.
Network (OPTIONAL FEATURE): M; Settings; Other Settings; Network
View and adjust your phone's network settings.
Your service provider registers your phone to a network. You can
view information about the current network, change how your phone
searches for a network, and activate alerts that indicate when a call
is dropped or network registration changes. ###62 Car Settings
(OPTIONAL ACCESSORY): M; Settings; Other Settings; Car Settings
Adjust hands-free car kit settings.
You can set your phone to route calls directly to the car kit
when it detects a connection, and automatically answer calls after
two rings. See page 135.
NOTE: The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws and
regulations on the use of these products.
Headset (OPTIONAL ACCESSORY): M; Settings; Other Settings;
Headset
Set your phone to automatically answer calls after two rings when
connected to a headset. See page 135.
34
###63 RECENT CALLS
VIEWING RECEIVED CALLS OR DIALED CALLS
Your phone keeps a list of the calls you recently received and
dialed, even if the calls did not connect. The lists are sorted from
newest to oldest entries. The oldest entries are deleted as new ones
are added.
SHORTCUT: Press SEND to go directly to the dialed calls list from
the idle display.
Find the Feature: M; Recent Calls
Press: To
1. Scroll key: scroll to Received Calls or Dialed Calls
2. SELECT (Right soft key): select the list
3. Scroll key: scroll to an entry
NOTE: (check) means the call connected.
4. SEND: call the entry's number or view entry details, or
VIEW (Right soft key): open the Last Calls Menu to perform other
procedures as described in the following list ###64 The Last Calls
Menu can include the following options:
Option: Description
Store: Create a phonebook entry with the number in the
field.
No.
Delete: Delete the entry.
Delete All: Delete all entries in the list.
Send Message: Open a new text message with the number in the To
field.
Add Digits: Add digits after the number.
Attach Number: Attach a number from the phonebook or recent call
lists, after the highlighted number.
Send Tones: Send the number to the network as DTMF tones, for
credit card or password calls.
USING THE NOTEPAD
Your phone stores the most recent string of digits entered on
the keypad in a temporary memory location called the notepad. This
can be a phone number that you called, or a number that you entered
but did not call. To retrieve the number stored in the notepad:
Find the Feature: M; Recent Calls; Notepad ###65 Press: To
SEND: call the number, or
M: open the Dialing Menu to attach a number or insert a special
character, or
STORE (Right soft key): create a phonebook entry with the number
in the
No.
field
VIEWING AND RESETTING CALL TIMERS
Network connection time is the elapsed time from the moment you
connect to your service provider's network to the moment you end the
call by pressing END. This time includes busy signals and ringing.
The amount of network connection time you track on your resettable
timer may not equal the amount of time for which you are billed by
your service provider. For billing information, please contact your
service provider directly.
35
(OPTIONAL FEATURE):
You can view the following network connection times: ###66
Timer: Description
Last Call: Approximate time spent on last dialed or received call.
You cannot reset this timer.
Dialed Calls: Approximate time spent on dialed calls since the
last time you reset this timer.
Received Calls: Approximate time spent on received calls since
the last time you reset this timer.
All Calls: Approximate time spent on dialed and received calls
since the last time you reset this timer.
Lifetime: Approximate time spent on all calls on this phone. You
cannot reset this timer.
To view a call timer:
Find the Feature: M; Recent Calls; Call Times
Press: To
1. Scroll key: scroll to the timer you want
2. SELECT (Right soft key): view the recorded time
To reset the call timer:
Press: To
1. RESET (Right soft key): reset the time (if available)
2. YES (Left soft key): confirm the reset
36
###67 PHONEBOOK
You can store a list of names and phone numbers or email addresses
in your phone's electronic phonebook.
To see the names in your phonebook, press M; Phonebook from the
idle display. Scroll to a name and press VIEW (Right soft key) to view
details of the phonebook entry as shown below.
VIEWING ENTRY DETAILS
Type indicator identifies number type, such as: Work, Home, Main,
Mobile, Fax, Pager, Email. An icon designates each of these types.
Voice Name indicator indicates a recorded voice name.
Entry's Name is shown.
Edit entry option shown (Right soft key).
Press M to open the Phonebook when the MENU icon is shown at the
bottom of the display.
Return to list options shown (LEFT soft key).
Entry's speed dial number shown.
NOTE: When you set a distinctive ringer alert for an entry, the
Ringer ID setting appears below the speed dial number. ###68 STORING
A PHONEBOOK ENTRY
A phone number or email address is required for a phonebook entry.
All other information is optional.
SHORTCUT: Enter a phone number in the idle display, then press
STORE (Right soft key) to create a phonebook entry with the number
in the No. field. Go directly to step 3 to continue.
ENTER INFORMATION
Find the Feature: M; Phonebook; M; New
Press: To
1. Scroll key: scroll to Phone Number or Email Address
2. SELECT (Right soft key): select the entry type
3. CHANGE (Right soft key): select Name
4. keypad keys: enter a name for the entry
5. OK (Right soft key): store the name
6. CHANGE (Right soft key): select No. or Email
7. keypad keys: enter the phone number or email address (to a
maximum of 32 characters)
TIP: You can store a PIN code with the phone number. See page
70.
8. OK (Right soft key): store the phone number or email address.
###69 9. CHANGE (Right soft key): select Type
NOTE: This option is not available for email entries.
10. Scroll key: scroll to the number type
11. SELECT (Right soft key): select the number type
12. RECORD (Right soft key): record a voice name for the entry,
if desired
Or, Go to step 13 if you do not want a voice name
13. Scroll key: scroll to Speed No.
The next available speed dial number is assigned to a new
phonebook entry
37
14. CHANGE (Right soft key): select Speed No. if you want to change
it
15. keypad keys: enter a different speed dial number, if desired
16. OK (Right soft key): store the speed dial number
17. CHANGE (Right soft key): select Ringer Id if you want to assign
a distinctive ringer alert for the phone number
Your phone uses the alert to notify you when you receive a call
from this phone number. See page 102. ###70 18. Scroll key: scroll
to the alert you want
19. SELECT (Right soft key): store the ringer ID alert
20. SELECT (Right soft key): select More if you want to create
another entry under the same Name
You must use a different
identifier for each number.
Type
COMPLETE PHONEBOOK ENTRY
When you are finished entering information for a phonebook entry:
Press: To
DONE (Left soft key): store the entry
STORING A PIN CODE WITH THE PHONE NUMBER
You can store a PIN code with the phone number for calls that
require additional digits (for example, to make a calling card call,
or to retrieve voicemail or answering machine messages). Insert one
or more of the following characters in the dialing sequence to ensure
that the number dials and connects properly: ###71 Press: To
--Press M; Insert Pause: insert a pause character. Your phone
dials the preceding digits, waits for the call to connect, then sends
the remaining digit(s).
--Press M; Insert Wait: insert a wait character. Your phone dials
the preceding digits, waits for the call to connect, then prompts you
for confirmation before it sends the remaining digit(s).
--Press M; Insert `n': insert a number character. Your phone
prompts you for a number before dialing the call. The number you enter
is inserted into the dialing sequence in place of the `n' character.
NOTE: You can store a maximum of 32 digits per number. Each
character counts as one digit. ###72 RECORDING A VOICE NAME FOR A
PHONEBOOK ENTRY
You can record a voice name for a new or existing phonebook entry.
A voice name lets you call the phonebook entry using voice dial (see
page 73).
TIP: Make your recording in a quiet location. Hold the phone about
four inches (10 centimeters) from your mouth, and speak directly into
the phone in a normal tone of voice.
5. Press RECORD (Right soft key): begin recording.
6. Press and release the voice key and say the entry's name (in
two seconds): record the voice name.
7. Press and release the voice key and repeat the name: confirm
the voice name.
8. Press DONE (LEFT soft key): store the voice name. ###73 DIALING
A PHONEBOOK ENTRY
Use one of the following procedures to call a number (or send
a text message to an email address) stored in your phonebook.
Phonebook List:
Find the Feature: M; Phonebook
Press: To
1. keypad key letter: jump to entries that begin with that letter
(optional).
2. Scroll key: scroll to the entry.
3. SEND: make the call.
Voice Dial:
Do This: To
Press and release the voice key and say the entry's name (in two
seconds): make the call.
To speed dial a phonebook entry, see page 33. To call an entry
with one-touch dial, see page 33. ###74 STORING LONGER NUMBERS
A phonebook number can contain a maximum of 32 digits and
characters. You can create multiple phonebook entries to store a
dialing sequence that exceeds the 32-character limit. Then you can
send the entries in sequence to dial the number.
To store a dialing sequence longer than 32 characters:
Do This
1. Create a phonebook entry to store the first part of the dialing
sequence (for example, the number for your long-distance service
provider).
2. Create a second phonebook entry to store the next part of the
dialing sequence (for example, the country code and phone number for
an international call).
3. Repeat step 2 as necessary to store the entire dialing sequence.
(For example, create a third phonebook entry to store your calling
card number and PIN number.)
To dial a dialing sequence stored as multiple phonebook entries:
Do This
1. Dial the first phonebook entry. Perform any pause or wait tasks,
if necessary, to complete the dialing sequence. Your phone returns
to the idle display. ###75 2. Press M; Phonebook to re-open the
phonebook.
3. Highlight the second phonebook entry, then press M; Send Tones
to send the next portion of the dialing sequence.
4. Repeat steps 2 and 3 as necessary to send the entire dialing
sequence.
39
EDITING A PHONEBOOK ENTRY
Find the Feature: M; Phonebook
Press: To
1. Scroll key: scroll to the entry.
2. VIEW (Right soft key): view entry details.
3. EDIT (Right soft key): edit the entry.
Edit the entry as described on pages 68-70.
DELETING A PHONEBOOK ENTRY
Find the Feature: M; Phonebook
Press: To
1. Scroll key: scroll to the entry.
2. M: open the Phonebook Menu.
3. Scroll key: scroll to Delete.
4. SELECT (Right soft key): select Delete.
5. YES (LEFT soft key): confirm the deletion. ###76 SORTING THE
PHONEBOOK LIST
You can sort your phonebook list by speed dial number (the
standard), name, email address, or voice name.
NOTE: The voice name sort is identical to the name sort, except
that entries with voice name tags appear first.
Find the Feature: M; Phonebook
Press: To
1. M: open the Phonebook Menu.
2. Scroll key: scroll to Setup.
3. SELECT (Right soft key): select Setup.
4. Scroll key: scroll to Sort by.
5. CHANGE (Right soft key): select Sort by.
6. Scroll key: scroll to Name, Speed No., Voice Name, or Email.
7. SELECT (Right soft key): select the sort order.
SYNCHRONIZING WITH TRUESYNC SOFTWARE
(OPTIONAL ACCESSORY)
You can synchronize phonebook entries between your phone and
computer or hand-held device with Starfish TrueSync (r) software, a
Motorola accessory product. See the TrueSync user guide for more
information.
NOTE: TrueSync software is designed to synchronize with basic
features of many popular Personal Information Management (PIM)
software and hardware products.
40
###77 PICTURE VIEWER
Your phone contains pictures and animations that you can use as
screen saver images.
NOTE: Your phone may include predefined images. These images are
identified by a predefined object indicator. You cannot rename, delete,
or view details about predefined images.
Find the Feature: M; Picture Viewer
Press: To
1. Scroll key: scroll to the picture
2. SELECT (Right soft key): view the picture
3. Star or Pound key: view the previous/next picture, or
DETAILS (Right soft key): view picture information, or
M: open the Picture Viewer menu to perform other procedures as
described in the following list ###78 The Picture Viewer menu can
include the following options:
Option: Description
Details: View picture information.
Set as Screen Saver: Set the picture as your phone's screen saver
image.
Rename: Rename the picture.
Delete: Delete the picture.
To adjust your phone's screen saver image, see page 131.
41
###79 DATEBOOK
The datebook is a calendar that lets you schedule and organize
events such as appointments and meetings. You can set the datebook
to send a reminder alarm for specific events.
NOTE: You must set the correct time and date on your phone to
use the datebook.
To schedule or review datebook events:
Find the Feature: M; Datebook
WEEK VIEW
The datebook initially displays a calendar for the week. Lines
or filled boxes indicate scheduled events.
(graphic display)
--Untimed event
--12 hour window
--Exit the datebook
--Full day (12-hour) event scheduled
--Press M to open the Datebook Menu
--Go to selected day
--One-hour event
--Days of week (press Star or Pound key to select) ###80 DAY VIEW
Select a day and press VIEW (Right soft key) to see the day's
events.
(graphic display)
--Untimed event
--Down scroll arrow
--Return to previous screen
--Press M to open the Datebook Menu
--Show event details
--Event Reminder alarm
--Day of week
EVENT VIEW
Select an event and press VIEW (Right soft key) to see event
details.
(graphic display)
--Reminder alarm
--Down scroll arrow
--Return to previous screen
--Press M to open the Datebook Menu
--Edit event
--Event details
--Day and time ###81 ADDING A DATEBOOK EVENT
A title is required for a datebook event. All other information
is optional.
NOTE: You must create an event to use the reminder alarm.
Find the Feature: M; Datebook; day; M; New
1. CHANGE (Right soft key): select Title
2. keypad keys: enter a title for the event
3. OK (Right soft key): store the event title
42
4. Scroll key: scroll to other fields and enter information as
necessary
You can set start time, duration, date, repeat interval, and
reminder alarm.
5. DONE (LEFT soft key): store the event
CHANGING EVENT INFORMATION
Find the Feature: M; Datebook
1. Star or Pound key: scroll to the day
2. VIEW (Right soft key): display the day view
3. Scroll key: scroll to the event
4. VIEW (Right soft key): display the event view ###82 5.
EDIT (Right soft key): edit the event
6. Scroll key: scroll to the information you want to change
7. CHANGE (Right soft key): edit the information
8. keypad keys: enter new information
9. DONE (LEFT soft key): store the information
COPYING AN EVENT
Find the Feature: M; Datebook
1. Star or Pound key: scroll to the day
2. VIEW (Right soft key): display the day view
3. Scroll key: scroll to the event
4. M: open the Datebook Menu
5. Scroll key: scroll to Copy
6. SELECT (Right soft key): copy the event
7. YES (LEFT soft key): confirm the copy
Your phone assumes you want: change the date, and displays Date
field.
8. keypad keys: enter date information
9. Right soft key: move to month, day, and year
10. DONE (LEFT soft key): save the copy of the event
11. Scroll key: scroll to and edit event information, if necessary
12. DONE (LEFT soft key): store the information. ###83 DELETING
AN EVENT
Find the Feature: M; Datebook
Press: To
1. Star or Pound key: scroll to the day.
2. VIEW (Right soft key): display the day view.
3. Scroll key: scroll to the event.
4. M: open the Datebook Menu.
5. Scroll key: scroll to Delete.
6. SELECT (Right soft key): select Delete.
7. YES (LEFT soft key): confirm the deletion.
43
###84 RADIO
(OPTIONAL ACCESSORY)
You can use your phone to listen to FM radio stations when the
optional Motorola Original (TM) FM Stereo Radio Headset accessory is
plugged into the phone's accessory connector port.
TURNING THE RADIO ON AND OFF
Press: To
Radio (Right soft key): turn the radio on and off
Alternatively, you can use the following procedure:
Find the Feature: M; Radio
Press: To
On (Right soft key) or Off (Right soft key): turn the radio on
or off
NOTE: The Radio menu feature and soft key options appear only
when the FM Stereo Radio Headset is plugged into the accessory connector
port. ###85 TUNING A STATION
Do This: To
Press Scroll key: scroll to the next frequency, or
Press and hold Scroll key: scroll to the next available stereo
station.
STORING A PRESET
Do This: To
Press and hold a number key (1 to 9): assign its preset number
to the tuned station.
SELECTING A PRESET
Press: To
a number key (1 to 9): tune the station stored at the preset
location.
SENDING AND RECEIVING CALLS WITH THE RADIO ON
Your phone rings or vibrates as usual to notify you of an incoming
call, message, or other event. ###86 Do This: To
Press IGNORE (LEFT soft key): ignore the call.
Press ANSWER (Right soft key): answer the call, or
Press the button on the FM Stereo Radio Headset microphone: answer
the call.
NOTE: You can use the FM Stereo Radio Headset microphone to
converse with the other party during a call.
To end the call and resume the FM broadcast:
Do This: To
Press SEND: end the call, or
Press and hold the button on the FM Stereo Radio Headset
microphone: end the call.
Turn the radio off before dialing outgoing calls from the phone
keypad. You do not have to turn off the radio to dial emergency numbers,
44
or numbers selected from your phonebook or recent call lists.
TIP: To dial a recently called number, press SEND or the button
on the FM Stereo Radio Headset microphone to go to the dialed calls
list. For more information, see page 63.
45
###87 MESSAGES--VOICEMAIL
(OPTIONAL FEATURE)
You can listen to your voicemail messages by calling your network
voicemail phone number. Voicemail messages are stored on the
network--not on your phone.
STORING YOUR VOICEMAIL NUMBER
(OPTIONAL FEATURE)
Voicemail messages that you receive are stored on the network.
To listen to your messages, you must call your voicemail phone number.
NOTE: Your service provider may include additional information
about using this feature.
LISTENING TO A VOICEMAIL MESSAGE
Find the Feature: M; Messages; VoiceMail
The phone calls your voicemail number. If no voicemail number
is stored, your phone prompts you to store one.
SHORTCUT: If your voicemail number is also stored as phonebook
entry number 1, you can press and hold 1-key to listen to your voicemail
message(s). ###88 RECEIVING A VOICEMAIL MESSAGE
When you receive a voicemail message, your phone displays the
voice message waiting indicator and a New VoiceMail notification.
Press: To
CALL (Right soft key): listen to the message
The phone calls your voicemail phone number. If no voicemail
number is stored, your phone prompts you to store one.
STORING YOUR VOICEMAIL PHONE NUMBER
If necessary, use the following procedure to store your voicemail
phone number. Usually, your service provider has already done this
for you.
Find the Feature: M; Messages; M; VoiceMail Setup
Press: To
1. keypad keys: enter your voicemail number
2. OK (Right soft key): store the number
NOTE: You cannot store Pause, Wait, or `n' characters in this
number. If you want to store your voicemail number with these characters,
create a phonebook entry for it. Then, you can use the entry to call
your voicemail. For more about these characters, see page 70. ###89
Your service provider additionally may store your voicemail
number as phonebook entry number 1, so you can use one-touch dial to
listen to your voicemail messages. If necessary, see page 68 to store
your voicemail number for one-touch dial access.
TURNING OFF THE VOICE MESSAGE WAITING INDICATOR
To clear the voice message waiting indicator:
Find the Feature: M; Messages M; Clear Count
46
###90 MESSAGES--TEXT
(OPTIONAL FEATURE)
Text messages are brief messages that you can send and receive.
Quick notes are pre-written text messages that you can incorporate
into a message and send quickly.
Your text message inbox must be set up before you can send and
receive messages. The number of messages the inbox can hold depends
on the length of the messages, and the number of other messages and
drafts stored on your phone.
SETTING UP THE TEXT MESSAGE INBOX
NOTE: In many cases, your service provider has already set up
the text message inbox for you.
Find the Feature: M; Messages, M; Text Msg Setup
Press: To
1. CHANGE (Right soft key): change the Cleanup setting
2. Scroll key: scroll to the number of days you want to keep
messages in the inbox, or the number of messages you want to keep
3. SELECT (Right soft key): select the cleanup setting
4. DONE (Left soft key): save the inbox settings ###91 RECEIVING
A TEXT MESSAGE
NOTE: Your text message inbox must be set up before you can receive
text messages. See page 90.
When you receive a text message, your phone displays the message
waiting indicator and a New Message notification, and gives an alert.
Press: To
Press READ (Right soft key): open the message.
If reminders are turned on, your phone sends a reminder at regular
intervals until you close the new message notification, read the
message, or turn off your phone (see page 108).
When your phone displays Memory is Full, you must delete some
existing messages to receive new messages.
READING, LOCKING, OR DELETING A TEXT MESSAGE
Messages in the text message inbox are sorted from newest to
oldest. The oldest messages are deleted automatically as specified
by the inbox cleanup setting (see page 90). If you want to save a message,
you should lock it to prevent it from being deleted during cleanup.
Find the Feature: M; Messages; Inbox ###92 Press: To
1. Scroll keys: scroll to the message.
NOTE: See original print edition for icons associated with the
following indicators:
--unread
--unread (with attachment)
--unread and urgent
--unread and urgent (with attachment)
--read
--read (with attachment)
--read and locked
47
--read and locked (with attachment)
2. READ (Right soft key): open the message
3. BACK (Left soft key): close the message, or
DELETE (Right soft key): delete the message, or
M: open the Inbox Menu to perform other procedures as described
in the following list
The Inbox Menu can include the following options:
Option: Description
Create Message: Open a new text message. ###93 Call Back: Call
the number in the message header or embedded in the message.
Go To: Launch the micro-browser and go to a Web address (URL)
embedded in the message.
Reply: Open a new text message, with the sender's Reply To number
or email address in the To field.
Forward: Open a copy of the text message, with an empty To field.
Lock/Unlock: Lock or unlock the message.
Delete: Delete the message.
Delete All: Delete all inbox messages.
Inbox Setup: Open the text message inbox setup menu. ###94 STORE
A PICTURE OR ANIMATION FILE
Press: To
1. Scroll key: highlight the picture or animation in the message
2. M: open the Inbox Menu
3. Scroll key: scroll to Store
4. SELECT (Right soft key): display a list of items you can store
5. Scroll key: scroll to File Attachment
6. SELECT (Right soft key): display the file name
(
): the following numbers
sic
1. STORE (Right soft key): view storage options
2. Scroll key: scroll to Store Only, or Set as Screen Saver
3. SELECT (Right soft key): store the file and, optionally, set
it as your screen saver image
For more information about using pictures and animations, see
pages 77 and 131.
STORE A SOUND FILE
You can store a sound file, and set it as an event alert.
Press: To
1. Scroll key: highlight the sound file indicator in the message
2. M: open the Inbox Menu
3. Scroll key: scroll to Store ###95 4. SELECT (Right soft
key): display a list of items you can store
5. Scroll key: scroll to File Attachment
6. SELECT (Right soft key): display the file name
7. STORE (Right soft key): view storage options
8. Scroll key: scroll to Store Only or Set As Ring Tone
9. SELECT (Right soft key): select the option
If you select Store Only, the procedure is complete.
If you select Set As Ring Tone, your phone displays Set As Which?,
48
and lists the events for which you can set an alert.
10. Scroll key: scroll to the event
11. SELECT (Right soft key): store the sound and set it as the
event alert
For more information about using sound files, see pages 101 and
103.
SENDING A TEXT MESSAGE
You can send a text message to one or more recipients. You can
manually enter each recipient's phone number or email address, or
select numbers/addresses from the phonebook or recent call lists. ###96
NOTE: When you manually enter numbers and/or email addresses,
you must insert a space between each entry. Press 1-key one time, wait
for the space to appear, then enter the next number or email address.
Find the Feature: M; Messages; Create Message
Press: To
1. CHANGE (Right soft key): select To
2. keypad keys: enter one or more phone numbers and/or email
addresses
Tip: Press 1-key to insert a space between each number/address
that you enter manually.
Or, BROWSE (Right soft key): select numbers/addresses from the
phonebook or recent call lists as follows:
a. Scroll key: highlight Phonebook, Received Calls, or Dialed
Calls
b. SELECT (Right soft key): select the list
c. Scroll key: highlight a number/address
d. ADD (Right soft key): add the number/address to the list of
message recipients
e. DONE (Left soft key): return to the message editor when you
are finished ###97 3. OK (Right soft key): store the
numbers/addresses
4. CHANGE (Right soft key): select Msg
5. keypad keys: enter the message
NOTE: Message length is limited. As you near the limit, a display
counter shows how many characters are left.
Or, BROWSE (Right soft key): select and insert a quick note
message (see page 98)
6. keypad keys: enter the message
NOTE: Message length is limited to seven (7) pages of 1000
characters each. A display counter cycles between the number of pages
written (number preceded by a star), and the number of characters left
on the current page.
Or, BROWSE (Right soft key): select and insert a quick note
message (see page 98)
7. OK (Right soft key): store the message
8. CHANGE (Right soft key): select Priority
9. Scroll key: scroll to the priority you want
10. SELECT (Right soft key): set the priority ###98 11. CHANGE
49
(Right soft key): select Call
12. keypad keys: enter a number for the recipient to call back
13. OK (Right soft key): store the number
14. DONE (Right soft key): finish the message
Your phone displays the total pages in the message.
15. YES (Left soft key): send the message, or
NO (Right soft key): cancel the message or save it in the drafts
folder
SENDING A QUICK NOTE TEXT MESSAGE
Quick notes are pre-written text messages that you can incorporate
into a message and send quickly (for example, on my way). You can also
create new quick notes.
Find the Feature: M; Messages; Quick Notes
Press: To
1. Scroll key: scroll to the quick note ###99 2. READ (Right
soft key): read the quick note, or
M: open the Quick Note Menu to perform other procedures as
described in the following list
The Quick Note Menu can include the following options:
Option: Description
New: Create a new quick note.
Edit: Edit the quick note.
Delete: Delete the quick note.
Send: Open a new message with the quick note in the Msg field.
INSERTING PICTURES, ANIMATIONS, AND SOUNDS
You can insert pictures, animations, and sounds into a text
message as you compose it.
INSERT A FILE
Enter your message as usual. When you come to a spot where you
want to insert a picture or sound file:
Press: To
1. M: open the Message Menu
2. Scroll key: scroll to Insert ###100 3. SELECT (Right soft
key): display a list of items you can insert
4. Scroll key: scroll to Quick Note, Picture, Animation, or Sound
5. SELECT (Right soft key): select the file type
6. Scroll key: highlight the file you want
7. INSERT (Right soft key): insert the file
Inserted animations or graphics appear in the message, while sound
files are represented by an (icon--see original print).
NOTE: You cannot forward or send some downloaded objects (such
as those you pay for). These "protected" objects do not appear in the
selection lists for attachments.
VIEWING THE STATUS OF SENT TEXT MESSAGES
Messages that you send are stored in the outbox.
50
Find the Feature: M; Messages; Outbox
Messages in the outbox are sorted from newest to oldest. The
following indicators show message status:
NOTE: See original print edition for icons associated with the
following indicators:
--sending in progress
--sent
--sending failed
51
###101 RING STYLES
Your phone rings or vibrates to notify you of an incoming call
or other event. This ring or vibration is called an alert. You can
select one of five different ring styles:
NOTE: See original print edition for icons associated with the
following indicators:
--loud ring
--soft ring
--vibrate
--vibrate and ring
--silent
The ring style indicator in the display shows the current ring
style (see page 23).
Each ring style contains settings for specific event alerts,
ringer ID, and ringer and keypad volume.
SELECTING A RING STYLE
Find the Feature: M; Ring Styles; Style
Press: To
1. Scroll key: scroll to the ring style
2. SELECT (Right soft key): select the ring style
CUSTOMIZING A RING STYLE
CHANGE STYLE SETTINGS
You can change the alerts that notify you of the following events:
incoming calls, text messages, voicemail messages, data calls, fax
calls, alarms, and reminders. Any changes you make are saved to the
current ring style. ###102 Find the Feature: M; Ring Styles;
Style
Note:
Detail
Style
represents the current ring style.
Press: To
1. Scroll key: scroll to the event
2. CHANGE (Right soft key): select the event
3. Scroll key: scroll to the alert you want
4. SELECT (Right soft key): select the alert
ACTIVATE AND DEACTIVATE RINGER ID'S
When ringer ID's are turned on, your phone uses distinctive ringer
alerts to notify you of incoming calls or messages from specific entries
stored in your phonebook. To open a phonebook entry and assign a ringer
ID, see page 68.
Find the Feature: M; Ring Styles;
Note:
Style
represents the current ring style. ###103 SET
Style
Detail
RINGER OR KEYPAD VOLUME
Find the Feature: M; Ring Styles;
Note:
Style
represents the current ring style.
Style
Detail
Press: To
52
1. Scroll key: scroll to Ring Volume or Key Volume
2. Star or Pound key: scroll to the desired volume
3. OK (Right soft key): confirm the new volume
CREATING AND EDITING ALERT TONES
You can create and store custom alert tones on your phone. The
tones appear in the list of available alerts.
CREATING A TONE
Find the Feature: M; Ring Styles; My Tones; [New Tone]
Press: To
1. CHANGE (Right soft key): select Notes
2. Scroll key or keypad keys: enter notes for the tone (see the
following section)
3. OK (Right soft key): store the notes ###104 4. CHANGE (D):
select Name
5. keypad keys: enter the name for the tone
6. OK (Right soft key): store the name
7. DONE (Right soft key): store the tone
ENTERING NOTES
Press Scroll key up or down to select a note in octaves 0-8.
Basic notes: c d e f g a b Sharp Notes: sharp/c sharp/d sharp/f
sharp/g sharp/a
You can also enter note details and rests. For example,
star-2-sharp/g-0-r plays a second-octave G sharp whole note followed
by a rest. Press number keys repeatedly to cycle through the options
in the following table.
NOTE TABLE
Key.
Display: Description
1-key.
1: 1/2 note, as in star-4-c-1
dot.: dotted note, as in star-4-c: which is 1 and 1/2 counts
colon: double dotted note, as in star-1-a: which is 1 and 3/4
counts
semi-colon: 2/3 length note, as in star-1-a; which is 2/3 of a
count
2-key.
a: A note
b: B note
c: C note
2: 1/2 note, as in star-4-c-2 ###105 3-key.
d: D note
e: E note
f: F note
3. 1/8 note, as in star-4-c-3
53
4-key.
g: G note
4: 1/16 note, as in star-1-c-4
5-key.
5: 1/32 note, as in star-4-c-5
6-key.
6. sets octave six, as in star-6
7-key
r: inserts a rest (you can add length modifiers, such as r-1)
7: sets octave seven, as in star-7
8-key.
8: sets octave eight, as in star-8
0-key.
0: whole note, as in star-4-c-0
(Star): sets an octave when followed by 0-8, as in star-4-c for
a C note in octave four
(Sharp sign): sharp note, as in star-4-sharp/c
&: flat note, as in star-4-&-d
Star-key: move cursor left
Pound key: move cursor right ###106 Example
To create a simple tone, you can enter notes by pressing Scroll
key up and down, and enter rests by pressing 7-KEY. For example:
Press: To: Display
1. Scroll Key: scroll up to star-4-c then wait for the highlight
to disappear: star-4-c
2. Scroll Key: scroll up to star-4-d: star-4-c-2-star-4-d
The phone adds a 2 after each note, to indicate it is a half note.
To change the length, see page 104.
3. Scroll key: scroll up to star-4-e:
star-4-c-2-star-4-d-2-star-4-e
4. 7-key: enter a rest: star-4-c-2-star-4-d-2-star-4-e-2-r
5. Scroll key: scroll down to star-4-c
star-4-c-star-4-d-star-4-e-r-2-star-4-c
6. M; Play All: play the tone ###107 EDITING A TONE
You cannot edit the standard alert tones included with your phone.
To edit a custom tone that you created:
Find the Feature: M; Ring Styles; My Tones
Press: To
1. Scroll key: scroll to the tone
2. EDIT (Right soft key): open the tone details
3. Scroll key: scroll to Name or Notes
4. CHANGE (Right soft key): select the details to edit
5. Scroll key or keypad keys: enter new text or notes
6. OK (Right soft key): store the details
54
7. DONE (Left soft key): store the tone
DELETING A TONE
You cannot delete the standard alert tones included with your
phone. To delete a custom tone that you created:
Find the Feature: M; Ring Styles; My Tones
Press: To
1. Scroll key: scroll to the tone
2. M: open the Tone Menu
3. Scroll key: scroll to Delete
4. SELECT (Right soft key): select Delete
5. YES (Left soft key): confirm the deletion ###108 STORING A
TONE FROM A TEXT MESSAGE
To store a tone you receive in a text message, see page 93.
SETTING REMINDERS
A reminder is an alert that rings or vibrates at regular intervals
to notify you about a voicemail or text message that you have received.
Find the Feature: M; Ring Styles;
NOTE:
Style
represents the current ring style.
Style
Detail; Reminders
Press: To
1. Scroll keys: scroll to Beep or Vibrate to set the reminder
alert type, or Off to turn off all reminders.
2. SELECT (Right soft key): select the reminder alert.
55
###109 SHORTCUTS
Your phone includes several standard shortcuts. You can create
additional shortcuts to frequently used menu items.
STANDARD SHORTCUTS
The following shortcuts are pre-programmed in your phone. You
cannot edit or delete these shortcuts.
Do This: To
Press M, then press and hold M (within two seconds): zoom in/out
on your phone display
M, Pound key: see your phone number
SEND: go to the dialed calls list
END: exit the menu system
CREATING A SHORTCUT
You can create a keypad shortcut plus an optional voice shortcut
to a menu item. A voice shortcut takes you directly to the menu item
when you say the shortcut name. ###110 TIP: Make your recording in
a quiet location. Hold the phone about four inches (10 centimeters)
from your mouth, and speak directly into the phone in a normal tone
of voice.
5. Press CHANGE (Right soft key): change the keypad shortcut
number,
Or, press DONE (LEFT soft key): select the default keypad shortcut
number,
Or, press Scroll keys: scroll to Voice to assign a voice shortcut.
6. Press RECORD (Right soft key): begin recording.
7. Press and release the voice key and say the shortcut's name
(in two seconds): record the shortcut name.
8. Press and release the voice key and repeat the name: confirm
the shortcut name.
9. Press DONE (LEFT soft key): store the shortcut name. ###111
USING SHORTCUTS
USE A KEYPAD SHORTCUT
Press: To
1. M: to open the menu.
2. a number key: go to the menu item or perform the menu action.
SELECT A SHORTCUT FROM THE LIST
Find the Feature: M; Shortcuts; shortcut name
USE A VOICE SHORTCUT
Do This: To
1. Press M: open the menu.
56
2. Press and release the voice key and say the shortcut's name
(in two seconds): go to the menu item or perform the menu action.
57
###112 VOICE RECORD
You can record personal messages and phone calls on your phone.
MAKING A RECORDING
Use this procedure to record your voice from the idle display,
or to record a phone call in progress. When recording a phone call,
only the incoming voice is recorded. Your phone plays an alert tone
to notify the other party that the call is being recorded.
NOTE: Recording phone calls is subject to varying state and
federal laws regarding privacy and recording of conversations.
TIP: Make your recording in a quiet location. Hold the phone about
four inches (10 centimeters) from your mouth, and speak directly into
the phone in a normal tone of voice.
Do This. Result
1. Press and hold the voice key for the duration of the recording.
The phone sounds an alert tone and begins recording.
2. Speak. The phone records.
3. Release the voice key to stop recording. The phone displays
the voice note number and total recording time. ###113 VIEWING THE
VOICE RECORD LIST
Find the Feature: M; Voice Record
(graphic display)
--Locked recording
--Time/date recorded
--Down scroll bar
--EXIT: Return to previous screen
--PLAY: Play the highlighted recording
--Press M to open the Voice Record Menu
PLAYING A RECORDING
Find the Feature: M; Voice Record
Press: To
1. Scroll key: scroll to the recording
2. PLAY (Right soft key): play the recording
When you connect an optional Motorola Original (TM) headset or
FM Stereo Radio Headset accessory to your phone, playback is
automatically routed to the headset.
TIP: You can play a recording while on a call. It will not be
transmitted to the other party. ###114 PLAYBACK SCREEN
The playback screen appears when the recording plays.
(graphic display)
--Line bar indicates percent played
--Recording number
--Press Star key to rewind
--Press Pound key to fast forward
--SAVE: Return to previous screen
--DELETE: Erase recording
--Press M to open the Voice Record Menu ###115 VOICE NOTE
CONTROLS
58
Volume keys: Raise or lower playback volume of recording.
Scroll key: Stop playback and scroll to next recording.
Star key: Rewind three seconds, resume playing. Press and hold
to rewind to the beginning.
Pound key: Fast forward three seconds, resume playing. Press and
hold to fast forward to end. When playback is complete, press to
restart.
Keypad keys: Press any number key to alternately stop and start
playback.
M: Stop playback and go to Voice Record Menu.
Left soft key: Stop playback and return to voice record list.
Right soft key: If recording is unlocked, stop playback and
display Delete Voice Note? If recording is locked, stop playback and
unlock recording. ###116 LOCKING AND UNLOCKING A RECORDING
Lock a recording to prevent it from being deleted. You must unlock
a recording to delete it.
Find the Feature: M; Voice Record
Press: To
1. Scroll key: scroll to the recording
2. M: open the Voice Record Menu
3. Scroll key: scroll to Lock or Unlock
4. SELECT (Right soft key): lock or unlock the recording
To lock or unlock a recording during playback:
Press: To
1. M: open the Voice Record Menu
2. Scroll key: scroll to Lock or Unlock
3. SELECT (Right soft key): lock or unlock the recording
Playback stops when you lock or unlock a recording. Press any
number key to resume playback. ###117 DELETING A RECORDING
Find the Feature: M; Voice Record
Press: To
1. Scroll key: scroll to the recording
2. M: open the Voice Record Menu
3. Scroll key: scroll to Delete or Delete All
4. SELECT (Right soft key): select the highlighted option
5. YES (Left soft key): confirm the deletion, or
NO (Right soft key): cancel deletion
Notes:
--You cannot delete a locked recording.
--You cannot recover a deleted recording.
59
###118 MICRO-BROWSER
(OPTIONAL FEATURE)
The micro-browser lets you access Web pages and Web-based
applications on your phone. Contact your service provider to set up
access, if necessary.
STARTING A MICRO-BROWSER SESSION
Find the Feature: M; Browser
Press: To
1. Scroll keys: scroll to a bookmark, service, or application.
2. SELECT (Right soft key): select the item.
SHORTCUT: If you open a text message with a Web address (URL)
embedded in it, you can press M; Go To to launch the micro-browser
and go directly to the URL.
If you are unable to establish a network connection with the
micro-browser, contact your service provider.
INTERACTING WITH WEB PAGES
Press: To
Scroll key: scroll through text, or highlight a selectable item.
###119 SELECT (Right Soft key): select the highlighted item.
SEND: call the highlighted phone number from the micro-browser.
keypad keys, followed by OK (Right Soft key): enter information.
TIP: Press DELETE (STAR key) to delete one letter at a time if
you make a mistake.
BACK (Left soft key) or STAR key: go back to the previous page.
M: open the Browser Menu.
60
###120 CALCULATOR
You can use your phone as a calculator and currency converter.
CALCULATING NUMBERS
Find the Feature: M; Calculator
Press: To
1. number keys: enter a number.
2. Star or Pound key: highlight a calculator function.
3. SELECT (Right soft key): perform the function.
(graphic display)
--Selected function appears
--Press STAR or Pound to highlight a function
--EXIT: Exit the calculator
--Press M to open the Calculator Menu
--SELECT: Perform the highlighted function
--Press STAR or Pound key to scroll to other functions
--Entered number appears in the display ###121 The calculator
can perform the following functions:
Function: Description
Decimal point: Insert a decimal point
C: Clear the calculation
CE: Clear entry (replaces C when you enter subsequent values in
a calculation)
Equal sign: Calculate the result
Plus sign: Add
Minus sign: Subtract
Times sign: Multiply
Division sign: Divide
Percent sign: Divide the displayed value by 100
Plus/Minus sign: Change the entry's sign (positive/negative)
Dollar sign: Calculate the exchange rate
MS: Store the value in memory (overwrites current stored value)
MC: Clear the value stored in memory
MR: Replace the displayed value with the value stored in memory
###122 CONVERTING CURRENCY
The currency converter works just like the calculator, but uses
the currency function:
Find the Feature: M; Calculator; M; Exchange Rate
Press: To
1. number keys: enter the exchange rate.
2. OK (Right soft key): store the exchange rate.
3. number keys: enter the amount to convert (amount to multiply
by the exchange rate).
4. Star or Pound key: highlight the currency function.
5. SELECT (Right soft key): perform the conversion.
61
###123 GAMES AND APPLICATIONS
(OPTIONAL FEATURE)
You can download a variety of applications onto your phone, such
as entertainment (games, ring tones, images) and productivity tools
(expense tracking, news delivery, flight information). The
availability of applications depends on your service provider. These
applications are stored in the Brew folder on your phone.
NOTE: Your service provider may rename the Brew feature.
DOWNLOADING AN APPLICATION
Brew may have a different name on your phone.
Find the Feature: M; Brew; Brew Shop
Press: To
1. START (Left soft key): connect to Brew shop
Your phone displays a list of application categories
2. Scroll key: scroll to a category
3. SELECT (Right soft key): view a list of applications available
for downloading
4. Scroll key: scroll to the application you want to download
###124 5. SELECT (Right soft key): view pricing options for the
application
Pricing options vary by application. You may be presented with
options to purchase the application, subscribe for a monthly fee, or
pay an unlimited usage charge.
6. Scroll key: scroll to the purchase you wish to make
7. SELECT (Right soft key): select your purchase
8. YES (Left soft key): confirm your purchase
Your phone downloads and installs the application. The phone then
asks if you wish to run the application.
9. YES (Left soft key): launch the application
Or, NO (Right soft key): exit Brew shop
LAUNCHING AN APPLICATION
Brew may have a different name on your phone.
Find the Feature: M; Brew; application ###125 NOTES:
--If you receive an incoming call while using an application,
your phone pauses the application, notifies you of the call, and prompts
you to answer. When the call ends, the phone gives you the option to
return to the application.
--If you receive an incoming call while downloading an application,
your phone forwards the call to your voicemail. If you do not have
voicemail, the caller receives a busy signal.
DISABLING OR REMOVING AN APPLICATION
The memory capacity of your phone determines how many applications
you can have installed at one time. To free up memory for a new
application, you can temporarily disable an existing application, or
permanently remove the existing application from your phone.
When you disable an application, your phone removes the
application from memory but retains the purchase information. You can
restore the disabled application at a later time for no additional
62
charge.
When you remove an application, your phone completely removes
the application from the phone. To reinstall the application, you must
download it and pay for it again as described on page 123.
Brew may have a different name on your phone.
Find the Feature: M; Brew; Brew Shop ###126 Press: To
1. OPTIONS (Right soft key): view the list of applications
installed on your phone
2. Scroll key: scroll to the application you want
3. SELECT (Right soft key): view the application's memory usage
information, and expiration information, if applicable
4. DISABLE (Left soft key): temporarily disable the application,
or
REMOVE (Right soft key): permanently remove the
application from memory
5. YES (Left soft key): confirm your selection
Your phone disables or removes the application
NOTE: Airtime charges apply to remove an application subscription.
Contact your service provider for more information.
RESTORING A DISABLED APPLICATION
Brew may have a different name on your phone.
Find the Feature: M; Brew; Brew Shop ###127 Press: To
1. OPTIONS (Right soft key): view the list of applications
installed on your phone
2. Scroll key: scroll to the application you want to restore
3. SELECT (Right soft key): view the application's memory usage
information, and expiration information, if applicable
4. RESTORE (Left soft key): restore the application, or
REMOVE (Right soft key): permanently remove the application from
memory
NOTE: Airtime charges apply to restore an application.
Contact your service provider for more information.
VIEWING BREW INFORMATION AND A HISTORY
To view the total amount of phone memory available for Brew
applications, and the memory used for current installed applications:
Find the Feature: M; Brew; Brew Shop; Options; Information
Brew may have a different name on your phone. ###128 To
view Brew version information, and a log of application activities:
Find the Feature: M; Brew; Brew Shop; Options; View Log
Your phone lists the date(s) on which application activities
occurred. Highlight a date to view the action performed on that date.
Your phone documents the following activities:
--download and install application
--disable application
--remove application
--restore application
63
--end application subscription
SETTING DNS IP ADDRESSES
Your phone must be set up with a valid domain name service (DNS)
IP address before you can run Brew applications that require an active
network connection. In many cases, your service provider has already
entered primary and secondary DNS addresses for you. Contact your
service provider for the DNS addresses, if necessary.
Brew may have a different name on your phone.
Find the Feature: M; Settings; Brew DNS
Press: To
1. Scroll key: scroll to Primary DNS
2. CHANGE (Right soft key): change the Primary DNS
3. keypad keys: enter the primary DNS IP address ###129 4. OK
(Right soft key): save the address
5. Scroll key: scroll to Secondary DNS
6. CHANGE (Right soft key): change the Secondary DNS
7. keypad keys: enter the secondary DNS IP address
8. OK (Right soft key): save the address
64
###130 ADJUSTING YOUR SETTINGS
REORDERING MENU ITEMS
You can reorder the items in your phone's main menu.
Find the Feature: M; Settings; Other Settings; Personalize; Main
Menu
Press: To
1. Scroll keys: scroll to a menu item.
2. GRAB (Right soft key): grab the menu item.
3. Scroll keys: move the item to a new location in the menu.
4. INSERT (Right soft key): insert the menu item.
CUSTOMIZING A SOFT KEY FUNCTION
You can relabel the soft keys (Left and Right) to access different
menu items from the idle display.
Find the Feature: M; Settings; Other Settings; Personalize; Keys
###131 Press: To
1. Scroll key: scroll to Left, Right, or Smart
2. CHANGE (Right soft key): select the key
3. Scroll key: scroll to the new key function
4. CHANGE (Right soft key): confirm the new function
SCREEN SAVER
You can set a picture or an animation as a screen saver image
in your phone's idle display. The image is displayed when no activity
is detected for a specified time period.
The screen saver image is shrunk to fill the display, if necessary.
An animation repeats for one minute, then the first frame of the
animation is displayed.
Find the Feature: M; Settings; Other Settings; Personalize;
Screen Saver
Press: To
1. Scroll key: scroll to Picture
2. CHANGE (Right soft key): open the picture viewer
3. Scroll key: scroll to a picture/animation
Scroll to (None) to turn off the screen saver image.
4. SELECT (Right soft key): select the image
5. Scroll key: scroll to Delay
6. CHANGE (Right soft key): set the delay interval ###132
7. Scroll key: scroll to the inactivity interval that triggers
the screen saver
8. SELECT (Right soft key): confirm the delay setting
9. DONE (Left soft key): save screen saver settings
HIDING OR SHOWING LOCATION INFORMATION
(OPTIONAL FEATURE)
Your phone can use the
automatic location information
(ALI)
feature to tell the network where you are physically located.
When ALI is set to Location On, your phone displays the ALI on
65
indicator. Services may use your known location to provide useful
information (for example, driving directions, or the location of the
nearest bank). Your phone prompts you when the network or a service
asks for your location. You can refuse at this point.
When ALI is set to 911 Only, your phone displays the ALI off
indicator, and the phone does not send location information unless
you call the emergency phone number (such as 911).
Find the Feature: M; Settings; Location
Press: To
1. Scroll key: scroll to Location On or 911 Only
2. SELECT (Right soft key): select the setting ###133 TTY
OPERATION
(OPTIONAL ACCESSORY)
You can use an optional TTY device with your phone to send and
receive calls. You must plug the TTY device into the phone's headset
jack and set the phone to operate in one of three TTY modes.
NOTES:
--Use a TSB-121 compliant cable (provided by the TTY manufacturer)
to connect the TTY device to your phone.
--Set the phone volume to level 4 (middle setting) for proper
operation. If you experience a high number of incorrect characters,
adjust the volume as necessary to minimize the error rate.
--For optimal performance, your phone should be at least 12 inches
(30 centimeters) away from the TTY device. Placing the phone too close
to the TTY device may cause high error rates.
SET TTY MODE
When you set your phone to a TTY mode, it operates in that mode
whenever the TTY device is connected.
Find the Feature: M; Settings; Other Settings; Initial Setup;
TTY Setup
Press: To
1. Scroll key: scroll to TTY Setup ###134 2. CHANGE (Right soft
key): change the TTY mode
3. Scroll key: scroll to the TTY mode
4. SELECT (Right soft key): select the TTY mode
The TTY Setup menu can include the following options:
Option: Description
TTY: Transmit and receive TTY characters
VCO: Receive TTY characters but transmit by speaking into the
microphone
HCO: Transmit TTY characters but receive by listening to the
earpiece
Voice: Return to normal voice mode
When your phone is in a TTY mode, the international TTY symbol
and the mode setting are shown in the display. You can press TTYMODE
(LEFT soft key) to change the mode setting.
66
SWITCH TO TTY MODE DURING A VOICE CALL:
Press: To
1. M: open the Call menu.
2. Scroll keys: scroll to TTY Setup.
3. SELECT (Right Soft key): display the TTY Setup menu.
4. Scroll keys: scroll to the TTY mode.
5. SELECT (Right soft key): select the TTY mode. ###135
RETURN TO VOICE MODE
To return to normal voice mode, select Voice from the TTY Setup
menu as described on page 133.
HANDS-FREE USE
(OPTIONAL ACCESSORY)
You can purchase an optional Motorola Original (TM) hands-free
car kit or headset for your phone.
These accessories provide alternative ways for you to use your
phone without using your hands.
NOTE: The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws and
regulations on the use of these products.
AUTOMATIC ANSWER
You can set your phone to automatically answer calls after two
rings (four seconds) when connected to a car kit or headset.
Find the Feature: M; Settings; Other Settings
Press: To
1. Scroll key: scroll to Car Settings or
Headset
2. SELECT (Right soft key): select the feature
3. Scroll key: scroll to Auto Answer
4. CHANGE (Right soft key): select Auto Answer
5. Scroll key: scroll to On or Off
6. SELECT (Right soft key): confirm the setting ###136
AUTOMATIC HANDS-FREE
You can set your phone to automatically route calls to a car kit
when it detects a connection.
Find the Feature: M; Settings; Other Settings; Car Settings; Auto
Handsfree
Press: To
1. Scroll key: scroll to On or Off
2. SELECT (Right soft key): confirm the setting
POWER-OFF DELAY
When your phone is connected to a car kit, you can set it to stay
on for a period of time after you switch off the ignition. This prevents
the phone from draining your vehicle battery, but leaves the phone
on long enough that you do not have to re-enter your unlock code when
making short stops.
NOTE: This feature may not work with all car ignition switches.
67
CAUTION: If you select Continuous the phone does not power off
when you turn off the ignition. Be careful not to drain your vehicle
battery if you select this option.
Find the Feature: M; Settings; Other Settings; Car Settings;
Power-Off Delay ###137 Press: To
1. Scroll key: scroll to the time delay
2. SELECT (Right soft key): confirm your selection
CHARGER TIME
When your phone is connected to a car kit, you can set it to charge
itself for a specified time period after you switch off the ignition.
This helps ensure that the phone battery gets fully charged while the
vehicle is parked.
NOTE: This feature may not work with all car ignition switches.
Find the Feature: M; Settings; Other Settings; Car Settings;
Charger Time
Press: To
1. Scroll key: scroll to the charge time
2. SELECT (Right soft key): confirm your selection
68
###138 DATA AND FAX CALLS
(OPTIONAL ACCESSORY)
An optional Motorola Original (TM) data kit (which includes a
cable connector) lets you transfer data between your phone and a
computer, Palm O (r) compatible device, or Microsoft Windows CE, Pocket
PC, or Handheld PC device. You can:
--Synchronize phonebook and datebook information between your
phone and a computer or PDA.
--Use your phone as a modem to connect to the Internet.
--Use your phone to send and receive data and fax calls on your
computer or hand-held device.
MAKING A CABLE CONNECTION
INSTALL THE SOFTWARE
To transfer data between your phone and computer, you must install
the software included with the Motorola Original data kit. See the
data kit's user guide for more information.
ATTACH THE CABLE
Use a Motorola Original serial cable or Motorola Original USB
cable to connect your phone to the external device.
NOTE: Not all devices are compatible with a cable connection.
Check your computer or hand-held device to determine the type of cable
you need. ###139 Serial Cable
Do This
1. Plug the serial cable into the detachable head. Make sure that
the Motorola logo on the detachable head and the metal shielding on
the serial cable plug are both facing you.
2. With the Motorola logo and the phone both facing you, plug
the detachable head into the phone's accessory connector port.
3. Plug the other end of the cable into the serial interface
connection on the external device and tighten the screws. ###140
USB Cable
1. Plug the end of the cable with the Motorola logo into the
phone's accessory connector port. Make sure that the logo and the phone
are both facing you.
2. Plug the other end--the USB connection--into the USB port on
the external device.
SYNCHRONIZING DATA
You can synchronize phonebook and datebook information between
your phone, computer, and PDA with Starfish TrueSync (r) software,
a Motorola accessory product. See the TrueSync user guide for more
information.
NOTE: TrueSync software is designed to synchronize with basic
features of many popular Personal Information Management (PIM)
software and hardware products.
SENDING A DATA OR FAX CALL
Use this procedure to send data or a fax from a connected device.
Connect your phone to the device as described on pages 138-140
69
and do the following: ###141 Do This: To
1. Check the phone: make sure that the phone is connected and
powered on
2. Open the application on your computer: place the call through
the application (such as dial-up-networking or fax)
NOTE: You cannot dial data or fax numbers through your phone's
keypad. You must dial them through your computer.
3. End the call from the connected device: close the call and
connection when the transfer is complete.
RECEIVING A DATA OR FAX CALL
Use this procedure to transfer data or a fax to your computer
or hand-held device. Connect your phone to the device as described
on pages 138-140.
SET UP YOUR PHONE
Find the Feature: M; Settings; Other Settings; Connection;
Incoming Call
Do This: To
1. Press CHANGE (Right soft key): select Next Call ###142
2. Press Scroll key: scroll to Data in Only.
3. Press SELECT (Right soft key): set the call format.
4. Connect your phone to the device: enable the data transfer.
NOTE: You cannot answer incoming voice calls when your phone is
in data mode. Any voice calls you receive are treated as unanswered
calls. To return a voice call, reset your phone to voice mode as
described on page 142.
TRANSFER THE DATA OR FAX
Your phone notifies you when the data or fax call arrives, and
transfers the call to the connected device. Use the application running
on the device to answer the call.
END THE DATA/FAX CONNECTION
When the data or fax transfer is complete, end the call from the
connected device to close the connection.
RESET NORMAL VOICE OPERATION
After making a data or fax call, you must reset your phone to
resume normal voice operations.
Find the Feature: M; Settings; Other Settings; Connection;
Incoming Call; Next Call; Normal
SHORTCUT: Turn your phone off and back on.
70
###143 SECURITY
ASSIGNING A NEW CODE OR PASSWORD
Your phone's unlock code is originally set to 1234, and the
security code is originally set to 000000. Your service provider may
reset these numbers before you receive your phone.
If your service provider has not reset these numbers, we recommend
that you change them to prevent other users from accessing your personal
information. The unlock code must contain four digits, and the security
code must contain six digits.
NOTES:
--Your service provider may retain your phone's security code
for customer service purposes. In this case, you will not be able to
use phone features that require you to enter the security code.
--If the unlock code is the only code you can change, the New
Passwords menu is not available. In this case, change the unlock code
by selecting: M; Settings; Security; Phone Lock; Unlock Phone.
To change a code or password:
Find the Feature:
M; Settings; Security; New Passwords ###144 Press: To
1. Scroll keys: scroll to the code or password.
2. CHANGE (Right soft key): select the code or password.
3. keypad keys: enter your old code.
4. OK (Right soft key): submit your old code.
5. keypad keys: enter the new code.
6. OK (Right soft key): assign the new code.
7. keypad keys: re-enter the new code.
8. OK (Right soft key): confirm the new code.
IF YOU FORGET A CODE OR PASSWORD
If you forget your security code, contact your service provider.
If you forget your unlock code, try entering 1234 or the last
four digits of your phone number. If that does not work, do the following
at the Enter Unlock Code prompt:
Press: To
1. M: go to the unlock code bypass screen.
2. keypad keys: enter your security code.
3. OK (Right Soft key): submit your security code. ###145 LOCKING
AND UNLOCKING YOUR PHONE
You can lock your phone manually or set the phone to lock
automatically whenever you turn it off.
To use a locked phone, you must enter the unlock code. A locked
phone still rings or vibrates for incoming calls or messages, but you
must unlock it to answer.
You can make emergency calls on your phone even when it is locked.
For more information, see page 32.
LOCK YOUR PHONE MANUALLY
Find the Feature: M; Settings; Security; Phone Lock; Lock Now
Press: To
71
1. keypad keys: enter your unlock code
2. OK (Right soft key): lock the phone
SET YOUR PHONE TO LOCK AUTOMATICALLY
You can set your phone to lock every time you turn it off.
Find the Feature: M; Settings; Security; Phone Lock; Automatic
Lock; On
Press: To
1. keypad keys: enter your unlock code
2. OK (Right soft key): activate automatic lock ###146
UNLOCK YOUR PHONE
At the Enter Unlock Code prompt:
Press: To
1. keypad keys: enter your unlock code
2. OK (Right soft key): unlock your phone
RESTRICTING CALLS
You can stop all incoming and/or outgoing calls, or you can
restrict outgoing calls to the numbers stored in your phonebook.
NOTES:
--You can make emergency calls when outgoing calls are restricted.
--Your phone still receives incoming text messages when incoming
calls are restricted.
Find the Feature: M; Settings; Security; Restrict Calls
Press: To
1. keypad keys: enter your unlock code
2. OK (Right soft key): open the restrict calls menu
3. Scroll key: scroll to Outgoing Calls or Incoming Calls
4. CHANGE (Right soft key): select the option
5. CHANGE (Right soft key): change the Allow setting
6. Scroll key: scroll to All, None, or Phonebook
7. SELECT (Right soft key): select the allowed calls ###147
TIP: The phonebook is not locked when you restrict outgoing calls
to numbers stored in the phonebook. To prevent a user from adding (and
then calling) a new phonebook entry, you may want to lock the phonebook.
See the "Lock Application" item on page 57.
72
###148 TROUBLESHOOTING
Check these questions first if you have problems with your phone.
If you need additional help, contact the Motorola Customer Call Center
at 1-800-331-6456 (United States) or 1-800-461-4575 (Canada).
--Is your phone set up correctly?
Press M, Pound key. If you do not see your phone number, contact
your service provider.
--Is your battery charged? Do you see the battery level indicator
in the display?
The battery level indicator should have at least one segment
showing. If it does not, recharge your battery. See page 18.
--Does the handset have a signal? Do you see the strength
indicator in the display?
The signal strength indicator should have at least one segment
showing. If it does not, move to an area with a stronger signal to
use your phone.
--Is the earpiece volume too low?
While on a call, press the upper volume key on the side of your
phone. ###149 --Is the other party unable to hear you?
Your phone may be muted. Press UNMUTE (Right soft key) if
necessary to unmute the phone.
Also, make sure that your phone's microphone is not blocked by
its carrying case or a sticker.
--Has the phone been damaged, dropped, or gotten wet?
--Was a non-Motorola battery or battery charger used?
Dropping your phone, getting it wet, or using a non-Motorola
battery or battery charger can damage the phone. The phone's limited
warranty does not cover liquid damage or damage caused from using
non-Motorola accessories.
The following refer to specific problems:
--My phone was stolen. To whom should I report this?
Report a stolen phone to the police and to your service provider
(the company that sends you your monthly wireless service bill).
--I forgot my password.
See page 144. ###150 --I pressed the power key, but nothing
happened.
Be sure to press and hold the power key until the display appears
and you hear an alert. This could take several seconds. If nothing
happens, check that a charged battery is installed. See page 17.
--The display says: Enter Unlock Code. How do I unlock my phone?
Enter the factory-preset unlock code (1234), or the last four
digits of your phone number. If this fails, call your service provider
(the company that sends you your monthly wireless service bill).
73
--My phone asks for an unlock code when I try to open a feature.
The application you want is locked. If you do not know the unlock
code, see page 144.
--My phone does not ring.
If you see (bell with two Z's)-icon or (phone outline with
vibration lines)-icon in the display, then the ringer is turned off.
See page 101.
Also, the ringer may be set to Silent even though your phone is
set to an audible ring style. See page 101. ###151 --My phone rings
even though I selected the Silent (or Vibrate) ring style.
The ringer may be set to play a tone even though your phone is
set to a silent ring style. See page 101.
--I tried to place a call and heard an alternating high/low tone.
Your call did not reach the wireless system. You may have dialed
the number too soon after turning the phone on. Wait until you see
the idle display before making a call.
--I cannot send/receive calls.
Make sure that you have a phone signal (see the "Signal Strength
Indicator" item on page 24). Avoid electrical or radio interference,
and obstructions such as bridges, parking garages, or tall buildings.
Your phone also may have the Restrict Calls feature turned on.
If you know the unlock code, you can change this setting in the security
menu (M; Settings; Security). ###152 --My phone has poor
reception and drops calls.
Make sure that your antenna is not bent or damaged.
Also, make sure you have a phone signal (see the "Signal Strength
Indicator" item on page 24). Stay clear of any obstructions such as
bridges, parking garages, or tall buildings.
--I cannot hear others on my phone.
While on a call, press the upper volume key. The display should
show the volume increasing.
Also, make sure that your phone's earpiece is not blocked by its
carrying case.
--I cannot open my message inbox.
Before you can use text messages, you must set up the message
inbox. See page 90.
How do I see the calls I sent or received?
To see the most recent calls you dialed or received:
M; Recent Calls; Received Calls; or Dialed Calls ###153 --My
phone will not send voicemail commands, passwords, or other codes.
Your phone sends commands and passwords as DTMF tones. You can
set your phone's DTMF tones to be On or Off. If you have trouble sending
numbers, check your DTMF setting.
1. From the idle display, press:
74
M; Settings; Other Settings; Initial Setup; DTMF
2. Press Scroll key to scroll to On.
3. Press SELECT (Right soft key) to select it.
--My phone's display is too dark.
Use the Contrast feature to change the level of contrast in your
display. See page 60.
You can also use the Backlight feature to change the length of
time that the display backlight stays on. See page 59. ###154 --My
battery didn't last as long as I expected. What can I do to extend
battery life?
Your battery's performance is affected by charge time, feature
use, temperature changes, backlight use, and other factors. For tips
on extending your battery life, see page 28.
--I am unable to record a voice note, voice name, or voice
shortcut.
Try moving to a quieter location to make your voice recording.
Hold the phone about four inches (10 centimeters) from your mouth,
and speak directly into the phone in a normal tone of voice.
--My TTY device doesn't work with my phone.
Your phone must be set to a TTY mode for the phone to detect your
TTY device. See page 133.
--I plugged the data cable into my phone but my phone did not
beep. How do I know if the data cable is ready to go?
The beep indicates that you are set up correctly. If you did not
hear a beep, make sure that both ends of the data cable are
connected--the smaller end to your phone and the larger end to your
computer.
Also, your computer may have deactivated the port to save power.
Try opening an application that uses the port, like a fax or dial-up
application, to automatically activate the port. ###155 --My phone
beeped when I attached the data cable, but my data and fax applications
don't work.
You must be in an area with digital coverage. Check your phone's
display for the digital signal indicator.
Some wireless networks may not support data or fax transmission.
If you see the digital indicator, but you are roaming on an unfamiliar
network, this may be the case.
Also, remember that data and fax transmission usually requires
a subscription. Call your service provider for more information.
--When sending data with the data cable, why does the computer
show a connection rate of 19200 Kbps?
19200 Kbps is the data transfer rate of the connection between
your computer and the phone. The rate of the connection between your
phone and the network is displayed on your phone, and will be either
14400 or 9600 Kbps.
75
--I can't end my data call by closing the application on my
computer. What can I do?
Try pressing END on your phone. Or try disconnecting the cable
or turning off the phone. If possible, always close the connection
through your computer, as these alternative methods may disrupt the
application on your computer. ###156 --I launched the
micro-browser but the display says:
Service Not Available
.
You may be in an area without service. If you have wireless service,
look in the display for the digital signal indicator (F). If you do
not see the indicator, you may be in an area that has only analog service
or no service at all. If you see the digital signal indicator, you
may be connected to a digital network that does not support Internet
access.
--I launched the micro-browser but the display says:
Unavailable
.
Data Server
Try again in a few minutes. The servers may be temporarily busy.
76
###157 PROGRAMMING INSTRUCTIONS
Follow this procedure if you need to program your phone's phone
number(s).
NOTE: Programming is normally done by a trained technician at
the site of purchase. Users should not make changes other than ones
in the following procedure. Before programming, ask your service
provider for your:
--10-digit MIN (Mobile Identification Number)
--8- to 15-digit IMSI (International Mobile Service Identifier)
--8- to 15-digit MDN (Mobile Directory Number)
--5-digit AMPS Sys ID number
--5-digit CDMA Sys ID number
Do This: To
1. Press 7, 4, 6, 6, 3, Pound key, M, M: open the user activation menu
(These keys spell P-H-O-N-E plus Pound key, M, M
2. Press Scroll key: scroll to NAM1 (phone number 1) or NAM2 (phone
number 2)
3. Press SELECT (Right soft key): open the NAM programming menu
###158 4. Press the keypad keys for the 10-digit MIN: open the
MIN editor and enter the new MIN
5. Press OK (Right soft key): store the new MIN
6. Similarly, enter appropriate numbers for the IMSI, MDN, AMPS
Sys ID, and CDMA Sys ID
7. Press DONE (Left soft key): close the NAM programming menu
8. Press EXIT (Left soft key): close the user activation menu
77
###159 SPECIFIC ABSORPTION RATE DATA
This model phone meets the government's requirements for exposure
to radio waves.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed limits for exposure to radio
frequency (RF) energy set by the U.S. Federal Communications Commission
for the United States and by Health Canada for Canada. These limits
are part of comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines are based on
standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure the
safety of all persons, regardless of age or health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC and by Health Canada is 1.6 W/kg. *1 Tests for
SAR are conducted using standard operating positions accepted by the
FCC and by Industry Canada with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual SAR
level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station antenna, the
lower the power output.
Before a phone model is available for sale to the public in the
U.S. and Canada, it must be tested and certified to the FCC and Industry
Canada that it does not exceed the limit established by each government
for safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) reported to the FCC and available
for review by Industry Canada. The highest SAR value for this model
phone when tested for use at the ear is 0.42 W/kg *2, and when worn
on the body, as described in this user guide, is 1.23 W/kg. (Body-worn
measurements differ among phone models, depending upon available
accessories and regulatory requirements). *2 ###160 While there may
be differences between the SAR levels of various phones and at various
positions, they all meet the governmental requirements for safe
exposure. Please note that improvements to this product model could
cause differences in the SAR value for later products; in all cases,
products are designed to be within the guidelines.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications & Internet Association
(CTIA) Web site:
http://phonefacts.net
or the Canadian Wireless Telecommunications Association (CWTA) Web
site:
http://www.cwta.ca
1. In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to
78
give additional
protection for the public and to account for any variations in
measurements.
2. The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for this
product.
79
###161 FDA
The U.S. Food and Drug Administration's Center for Devices and
Radiological Health Consumer Update on Mobile Phones
FDA has been receiving inquiries about the safety of mobile phones,
including cellular phones and PCS phones. The following summarizes
what is known--and what remains unknown--about whether these products
can pose a hazard to health, and what can be done to minimize any
potential risk. This information may be used to respond to questions.
Why the concern?
Mobile phones emit low levels of radio frequency energy (i.e.,
radio frequency radiation) in the microwave range while being used.
They also emit very low levels of radio frequency energy (RF),
considered non-significant, when in the stand-by mode. It is well known
that high levels of RF can produce biological damage through heating
effects (this is how your microwave oven is able to cook food). However,
it is not known whether, to what extent, or through what mechanism,
lower levels of RF might cause adverse health effects as well. Although
some research has been done to address these questions, no clear picture
of the biological effects of this type of radiation has emerged to
date. Thus, the available science does not allow us to conclude that
mobile phones are absolutely safe, or that they are unsafe. However,
the available scientific evidence does not demonstrate any adverse
health effects associated with the use of mobile phones.
What kinds of phones are in question?
Questions have been raised about hand-held mobile phones, the
kind that have a built-in antenna that is positioned close to the user's
head during normal telephone conversation. These types of mobile phones
are of ###162 concern because of the short distance between the phone's
antenna--the primary source of the RF--and the person's head. The
exposure to RF from mobile phones in which the antenna is located at
greater distances from the user (on the outside of a car, for example)
is drastically lower than that from hand-held phones, because a
person's RF exposure decreases rapidly with distance from the source.
The safety of so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house and which operate at far
lower power levels and frequencies, has not been questioned.
How much evidence is there that hand-held mobile phones might be
harmful?
Briefly, there is not enough evidence to know for sure, either
way; however, research efforts are on-going. The existing scientific
evidence is conflicting and many of the studies that have been done
to date have suffered from flaws in their research methods. Animal
experiments investigating the effects of RF exposures characteristic
of mobile phones have yielded conflicting results. A few animal studies,
however, have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. In one study, mice
genetically altered to be predisposed to developing one type of cancer
80
developed more than twice as many such cancers when they were exposed
to RF energy compared to controls. There is much uncertainty among
scientists about whether results obtained from animal studies apply
to the use of mobile phones. First, it is uncertain how to apply the
results obtained in rats and mice to humans. Second, many of the studies
that showed increased tumor development used animals that had already
been treated with cancer-causing chemicals, and other studies exposed
the animals to the RF virtually continuously--up to 22 hours per day.
For the past five years in the United States, the mobile phone
industry has supported research into the safety of mobile phones. This
research has resulted in two findings in particular that merit
additional study:
1. In a hospital-based, case-control study, researchers looked
for an association between mobile phone use and either glioma (a type
of brain cancer) ###163 or acoustic neuroma (a benign tumor of the
nerve sheath). No statistically significant association was found
between mobile phone use and acoustic neuroma. There was also no
association between mobile phone use and gliomas when all types of
types of gliomas were considered together. It should be noted that
the average length of mobile phone exposure in this study was less
than three years.
When 20 types of glioma were considered separately, however, an
association was found between mobile phone use and one rare type of
glioma, neuroepithelliomatous tumors. It is possible with multiple
comparisons of the same sample that this association occurred by chance.
Moreover, the risk did not increase with how often the mobile phone
was used, or the length of the calls. In fact, the risk actually
decreased with cumulative hours of mobile phone use. Most cancer
causing agents increase risk with increased exposure. An ongoing study
of brain cancers by the National Cancer Institute is expected to bear
on the accuracy and repeatability of these results. *1
2. Researchers conducted a large battery of laboratory tests to
assess the effects of exposure to mobile phone RF on genetic material.
These included tests for several kinds of abnormalities, including
mutations, chromosomal aberrations, DNA strand breaks, and structural
changes in the genetic material of blood cells called lymphocytes.
None of the tests showed any effect of the RF except for the micronucleus
assay, which detects structural effects on the genetic material. The
cells in this assay showed changes after exposure to simulated cell
phone radiation, but only after 24 hours of exposure. It is possible
that exposing the test cells to radiation for this long resulted in
heating. Since this assay is known to be sensitive to heating, heat
alone could have caused the abnormalities to occur. The data already
in the literature on the response of the micronucleus assay to RF are
conflicting. Thus, follow-up research is necessary. *2
FDA is currently working with government, industry, and academic
groups to ensure the proper follow-up to these industry-funded research
findings. Collaboration with the Cellular Telecommunications Industry
Association ###164 (CTIA) in particular is expected to lead to FDA
providing research recommendations and scientific oversight of new
81
CTIA funded research based on such recommendations.
Two other studies of interest have been reported recently in the
literature:
1. Two groups of 18 people were exposed to simulated mobile phone
signals under laboratory conditions while they performed cognitive
function tests. There were no changes in the subjects' ability to recall
words, numbers, or pictures, or in their spatial memory, but they were
able to make choices more quickly in one visual test when they were
exposed to simulated mobile phone signals. This was the only change
noted among more than 20 variables compared. *3
2. In a study of 209 brain tumor cases and 425 matched controls,
there was no increased risk of brain tumors associated with mobile
phone use. When tumors did exist in certain locations, however, they
were more likely to be on the side of the head where the mobile phone
was used.
Because this occurred in only a small number of cases, the
increased likelihood was too small to be statistically significant.
*4
In summary, we do not have enough information at this point to
assure the public that there are, or are not, any low incident health
problems associated with use of mobile phones. FDA continues to work
with all parties, including other federal agencies and industry, to
assure that research is undertaken to provide the necessary answers
to the outstanding questions about the safety of mobile phones.
What is known about cases of human cancer that have been reported in
users of hand-held mobile phones?
Some people who have used mobile phones have been diagnosed with
brain cancer. But it is important to understand that this type of cancer
also occurs among people who have not used mobile phones. In fact,
brain cancer occurs in the U.S. population at a rate of about 6 new
###165 cases per 100,000 people each year. At that rate, assuming 80
million users of mobile phones (a number increasing at a rate of about
1 million per month), about 4800 cases of brain cancer would be expected
each year among those 80 million people, whether or not they used their
phones. Thus it is not possible to tell whether any individual's cancer
arose because of the phone, or whether it would have happened anyway.
A key question is whether the risk of getting a particular form of
cancer is greater among people who use mobile phones than among the
rest of the population. One way to answer that question is to compare
the usage of mobile phones among people with brain cancer with the
use of mobile phones among appropriately matched people without brain
cancer. This is called a case-control study. The current case-control
study of brain cancers by the National Cancer Institute, as well as
the follow-up research to be sponsored by industry, will begin to
generate this type of information.
What is FDA's role concerning the safety of mobile phones?
Under the law, FDA does not review the safety of radiation
82
emitting consumer products such as mobile phones before marketing,
as it does with new drugs or medical devices. However, the agency has
authority to take action if mobile phones are shown to emit radiation
at a level that is hazardous to the user. In such a case, FDA could
require the manufacturers of mobile phones to notify users of the health
hazard and to repair, replace or recall the phones so that the hazard
no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions at this time, FDA has urged the mobile phone industry
to take a number of steps to assure public safety. The agency has
recommended that the industry:
--support needed research into possible biological effects of
RF of the type emitted by mobile phones
--design mobile phones in a way that minimizes any RF exposure
to the user that is not necessary for device function ###166
--cooperate in providing mobile phone users with the best possible
information on what is known about possible effects of mobile phone
use on human health
At the same time, FDA belongs to an interagency working group
of the federal agencies that have responsibility for different aspects
of mobile phone safety to ensure a coordinated effort at the federal
level. These agencies are:
--National Institute for Occupational Safety and Health
--Environmental Protection Agency
--Federal Communications Commission
--Occupational Health and Safety Administration
--National Telecommunications and Information Administration
The National Institutes of Health also participates in this group.
In the absence of conclusive information about any possible risk, what
can concerned individuals do?
If there is a risk from these products--and at this point we do
not know that there is--it is probably very small. But if people are
concerned about avoiding even potential risks, there are simple steps
they can take to do so. For example, time is a key factor in how much
exposure a person receives. Those persons who spend long periods of
time on their hand-held mobile phones could consider holding lengthy
conversations on conventional phones and reserving the hand-held
models for shorter conversations or for situations when other types
of phones are not available.
People who must conduct extended conversations in their cars every
day could switch to a type of mobile phone that places more distance
between their bodies and the source of the RF, since the exposure level
drops off dramatically with distance. For example, they could switch
to:
--a mobile phone in which the antenna is located outside the
vehicle ###167 --a hand-held phone with a built-in antenna connected
to a different antenna mounted on the outside of the car or built into
a separate package
83
--a headset with a remote antenna to a mobile phone carried at
the waist
Again, the scientific data do not demonstrate that mobile phones
are harmful. But if people are concerned about the radio frequency
energy from these products, taking the simple precautions outlined
above can reduce any possible risk.
Where can I find additional information?
For additional information, see the following Web sites:
Federal Communications Commission (FCC) RF Safety Program (select
"Information on Human Exposure to RF Fields from Cellular and PCS Radio
Transmitters"):
http://www.fcc.gov/oet/rfsafety
World Health Organization (WHO) International Commission on
Non-Ionizing Radiation Protection (select Q's & A's):
http://www.who.int/emf
United Kingdom, National Radiological Protection Board:
http://www.nrpb.org.uk
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
U.S. Food and Drug Administration (FDA) Center for Devices and
Radiological Health:
http://www.fda.gov/cdrh/consumer/ ###168 *1. Muscat et al.
Epidemiological Study of Cellular Telephone Use and Malignant Brain
Tumors. In: State of the Science Symposium; 1999 June 20; Long Beach,
California.
*2. Tice et al. Tests of mobile phone signals for activity in
genotoxicity and other laboratory assays. In: Annual Meeting of the
Environmental Mutagen Society; March 29, 1999, Washington, D.C.; and
personal communication, unpublished results.
*3. Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S,
Lim, E, and Varey, A. Effect of a 915-MHz simulated mobile phone signal
on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.
*4. Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild,
KH. Use of cellular telephones and the risk for brain tumors: a
case-control study. Int. J. Oncol., 15: 113-116, 1999.
84
###169 WARRANTY
MOTOROLA LIMITED WARRANTY FOR THE UNITED STATES AND CANADA
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc.
warrants its telephones, pagers, and consumer and professional two-way
radios (excluding commercial, government or industrial radios) that
operate via Family Radio Service or General Mobile Radio Service,
Motorola-branded or certified accessories sold for use with these
Products ("Accessories") and Motorola software contained on CD-ROMs
or other tangible media and sold for use with these Products ("Software")
to be free from defects in materials and workmanship under normal
consumer usage for the period(s) outlined below. This limited warranty
is a consumer's exclusive remedy, and applies as follows to new Motorola
Products, Accessories and Software purchased by consumers in the United
States or Canada, which are accompanied by this written warranty:
Products and Accessories
--
Products Covered
Length of Coverage.
--
Products and Accessories
as defined above, unless otherwise
provided for below.
One (1) year
from the date of purchase by the first consumer
purchaser of the product unless otherwise provided for below.
--
Decorative Accessories and Cases
. Decorative covers, bezels,
PhoneWrap (TM) covers and cases.
Limited lifetime warranty
for the lifetime of ownership by the
first consumer purchaser of the product.
--
Monaural Headsets
. Ear buds and boom headsets that transmit
mono sound through a wired connection.
Limited lifetime warranty
first consumer purchaser of the product. ###170 --
for the lifetime of ownership by the
Consumer
Two-Way Radio Accessories.
Ninety (90) days
from the date of purchase by the first consumer
purchaser of the product.
--
The balance of the original warranty or for ninety (90) days
Products and Accessories that are Repaired or Replaced.
from
the date returned to the consumer, whichever is longer.
EXCLUSIONS
Normal Wear and Tear
. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded from
coverage.
Batteries
. Only batteries whose fully charged capacity falls
below 80 percent of their rated capacity and batteries that leak are
covered by this limited warranty.
Abuse & Misuse
. Defects or damage that result from: (a) improper
85
operation, storage, misuse or abuse, accident or neglect, such as
physical damage (cracks, scratches, etc.) to the surface of the product
resulting from misuse; (b) contact with liquid, water, rain, extreme
humidity or heavy perspiration, sand, dirt or the like, extreme heat,
or food; (c) use of the Products or Accessories for commercial purposes
or subjecting the Product or Accessory to abnormal usage or conditions;
or (d) other acts which are not the fault of Motorola, are excluded
from coverage.
Use of Non-Motorola Products and Accessories
. Defects or damage
that result from the use of Non-Motorola branded or certified Products,
Accessories, Software or other peripheral equipment are excluded from
coverage.
Unauthorized Service or Modification
. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by someone other
than Motorola, or its authorized service centers, are excluded from
coverage. ###171
Altered Products
. Products or Accessories with
(a) serial numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of tampering; (c)
mismatched board serial numbers; or (d) nonconforming or non-Motorola
housings, or parts, are excluded from coverage.
Communication Services
. Defects, damages, or the failure of
Products, Accessories or Software due to any communication service
or signal you may subscribe to or use with the Products, Accessories
or Software is excluded from coverage.
SOFTWARE
--
Products Covered
Length of Coverage
--
Software
. Applies only to physical defects in the media that
embodies the copy of the software (e.g. CD-ROM, or floppy disk).
Ninety (90) days from the date of purchase.
EXCLUSIONS
Software Embodied in Physical Media
. No warranty is made that
the software will meet your requirements or will work in combination
with any hardware or software applications provided by third parties,
that the operation of the software products will be uninterrupted or
error free, or that all defects in the software products will be
corrected.
Software NOT Embodied in Physical Media
. Software that is not
embodied in physical media (e.g. software that is downloaded from the
internet), is provided "as is" and without warranty.
Who is Covered?
This warranty extends only to the first consumer purchaser, and
is not transferable.
What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or
86
refund the purchase price of any Products, Accessories or Software
that does not conform to this warranty. We may use functionally
equivalent ###172 reconditioned/refurbished/pre-owned or new Products,
Accessories or parts. No data, software or applications added to your
Product, Accessory or Software, including but not limited to personal
contacts, games and ringer tones, will be reinstalled. To avoid losing
such data, software and applications please create a back up prior
to requesting service.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
USA
Phones: 1-800-331-6456
Pagers: 1-800-548-9954
Two-Way Radios: 1-800-353-2729
TTY: 1-888-390-6456
CANADA
All Products: 1-800-461-4575
TTY: 1-888-390-6456
For Accessories and Software, please call the telephone number
designated above for the product with which they are used.
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola Authorized
Repair Center. To obtain service, you must include: (a) a copy of your
receipt, bill of sale or other comparable proof of purchase; (b) a
written description of the problem; (c) the name of your service
provider, if applicable; (d) the name and location of the installation
facility (if applicable) and, most importantly; (e) your address and
telephone number.
What Other Limitations Are There?
Any implied warranties, including without limitation the implied
warranties of merchantability and fitness for a particular purpose,
shall be limited to the duration of this limited warranty, otherwise
the repair, replacement, or refund as provided under this express
limited warranty is the exclusive remedy of the consumer, and is
provided in lieu of all other warranties, express or implied. In no
event shall Motorola be liable, whether in contract or tort ###173
(including negligence) for damages in excess of the purchase price
of the product, accessory or software, or for any indirect, incidental,
special or consequential damages of any kind, or loss of revenue or
profits, loss of business, loss of information or data, software or
applications or other financial loss arising out of or in connection
with the ability or inability to use the products, accessories or
software to the full extent these damages may be disclaimed by law.
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
87
the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights that vary from state to
state or from one jurisdiction to another.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola software
such as the exclusive rights to reproduce and distribute copies of
the Motorola software. Motorola software may only be copied into, used
in, and redistributed with, the Products associated with such Motorola
software. No other use, including without limitation disassembly of
such Motorola software or exercise of the exclusive rights reserved
for Motorola, is permitted.
Product registration is an important step toward enjoying your
new Motorola product. Registering helps us facilitate warranty service,
and permits us to contact you should your product require an update
or other service. Registration is for U.S. residents only and is not
required for warranty coverage.
Please retain your original dated sales receipt for your records.
For warranty service of your Motorola Personal Communications Product
you will need to provide a copy of your dated sales receipt to confirm
warranty status.
Thank you for choosing a Motorola product.
EXPORT LAW ASSURANCES
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the United
States of America and Canada may restrict the exportation or
re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the Canadian
Department of Foreign Affairs and International Trade.
RF ENERGY INTERFERENCE
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
89
###175 INDEX
A
accessories
optional 10, 84, 113, 133, 135, 138
standard 17
accessory connector port 1
active line indicator
defined 24
Add Digits feature 64
alarm 79, 81
alert
creating 103
defined 101
reminders, turning on/off 108
selecting 101-102
setting 94
turning off 32
M
master clear 61
master reset 61
Memory is Full! message 91
menu
Browser Menu 119
Calculator Menu 120
Datebook Menu 79, 80
Dialing Menu 34, 65
entering text 41, 43-51
features 52-62
Inbox Menu 92 ###180 Last Calls Menu 64
lists 40
locking applications 57
94
My Tones Menu 107
navigating 10, 39
personalizing 130
Phonebook Menu 67
Quick Note Menu 99
rearranging features 130
scroll feature 60
using features 10, 40
Voice Record Menu 113, 114, 115
menu indicator defined 24
menu key 1, 10, 24, 39
message
animation 93, 99
deleting, text 91-93
dialing number from 34
drafts folder 53
inbox setup, text
message 90
locking, text 91-93
outbox 53, 100
picture 93, 99
quick note 98
reading, text 91-93
receiving, text 91
reminders, receiving 91
reminders, turning on/off 108
sending 35, 95
sound 93, 99
status 100
text 90-100
voicemail 87-89
message waiting indicator
defined 24
displayed 91
micro-browser 118
microphone 1
missed call indicator 31
missed call, dialing 35
Missed Calls message 27, 31
muting a call 37
my telephone number 3, 22, 37, 55
my tones 103
My Tones Menu 107
N
network settings 61
notepad
defined 64
entering digits 64
retrieving digits 64
number, viewing your own 3, 55
95
numeric text mode 43 ###181
O
one-touch dial
defined 33
using 33
voicemail number 33
optional accessory, defined 10
optional feature, defined 10
outbox 53, 100
P
passwords. See codes
pause character 71
phone
active line indicator 24
alert, turning off 32
answer options 56
automatic location information 132
codes 143
user-entered information 61
feature specifications 38, 55
flip 21
information 38
location 132
locking 145
reset all options 61
security code 143
specifications 38, 55
turning on/off 21
unlock code 21, 143, 144
unlocking 21, 145
phone number
active line indicator 24
active phone line, changing 55
adding digits after 64
attaching to prefix digits 34
attaching two numbers 64
long numbers, storing 74-75
redialing 30
seeing your own 22, 37
sending text message to 35
storing in phonebook 68-70
viewing your own 3, 55
voice dial 35
phonebook
attaching two numbers 64
deleting an entry 75
dialing a number 73
editing an entry 75
email address 67
entry details 67
96
entry name 67
long numbers 74-75 ###182 number type indicator 67
one-touch dial 33
phone number 67
prefix digits, inserting 34
ringer ID, activating/deactivating 102
ringer ID, defined 69, 102
ringer ID, setting 69
sending an email 73
sorting entries 76
speed dial number 67, 69
speed dial number, defined 33
speed dial, using 33
storing an entry 68-70
synchronizing 140
synchronizing entries 76
voice name entry 72
voice name indicator 67