Motorola V60p User Manual

(M-Logo) MOTOROLA
DIGITAL WIRELESS TELEPHONE
User Guide--

START HERE

Part No. 6809474A61-O (V60p CDMA)
This alternate format edition contains the complete text of the
print edition with the addition of a phone description. It does not
offer display-independent directions for the use of the phone. A
display-independent "Supplement" for some of the major features of
the phone may be obtained by contacting Motorola at the numbers listed
in this manual.

NOTICE
Motorola strives to make all our products accessible to as many
people as possible. Some features may not be accessible to everyone.
You may find that this phone has some features that are impractical
for people who are blind or visually impaired. We welcome your comments
about the accessibility of our products. Call Customer Care
1-800-331-6456, extension 255.

Transcribed by
Horizons for the Blind, Inc.
2 N. Williams St.
Crystal Lake, IL 60014
[phone] Voice/TDD
[phone] FAX
E-mail:
[e-mail]
Web: horizons-blind.org
2004

###1 WELCOME
Welcome to the world of Motorola digital wireless communications!
We are pleased that you have chosen the Motorola V60p CDMA wireless
phone with Push-to-Talk (PTT) capability.

KNOW YOUR PHONE
Before you start to use your phone, take time to examine it. The
phone is basically a rectangle. Place the phone on a flat surface with
the front facing you and look over the phone. Various features are
located along the edges of the case as follows:

THE PHONE CASE:
The V60p CDMA is a "flip" model that has a cover over the main
keypad. Items that may be found on the outside of the phone are as
follows:

Headset Jack: The HEADSET JACK is at the left back-corner edge
of the top of the case. Insert headset accessory for handsfree use.
Volume Buttons: The VOLUME buttons are in the upper half of the
left case edge. These keys adjust earpiece and ringer volume.
Push-to-Talk (PTT) Button: This key is located under the lower
volume button. It is used for 2-way communications with other PTT
subscribers.
Accessory Connector Port: The ACCESSORY PORT is found at the
bottom edge of the case. Insert charger and phone accessories into
this area.
Status Light: The STATUS LIGHT is at the right hinge of the flip.
See incoming call and service lights.
Speakerphone Button: This button is to the right of the headset
jack.
Voice Key: The VOICE KEY may be found at the right side edge,
opposite the level of the upper volume key. This key will allow you
to make and use voice recordings.

INSIDE OF PHONE:
When the flip is raised it becomes the earpiece for the phone.
The display area is also located in this section.
The lower half of the case holds the major function areas for
operating your phone.
You will find a set of three keys beneath the display area. The
center key is the MENU key and the right and left keys are the Right
and Left "soft" keys.

--Left Soft Key: Perform functions identified by left display
prompt.

--Right Soft Key: Perform functions identified by right display
prompt.

--MENU: The MENU key is the main key for entering various menu
features. In this manual, M indicates the MENU key.
A second set of three buttons is located under the keys described
above. These are as follows:
Scroll key: This key is located under the M key. Use this key
to scroll through menus and lists, set feature values.
Power Key and End Key: This is the key to the left of the Scroll
key. It is used to turn phone on and off, end phone calls, exit menu

system. This key will be designated in this manual as PWR or END.
SEND Key: This is the key to the right of the Scroll key. It is
used to Send and answer calls, view recent dialed calls list.

The bottom half of the phone face is a standard alphanumeric
keypad. From the top to the bottom, and left to right, these keys are
arranged as follows:

Row 1: 1--Message icon , 2--abc, 3--def
Row 2: 4--ghi, 5--jkl, 6--mno
Row 3: 7--pqrs, 8--tuv, 9--wxyz
Row 4: Star Key, 0--Plus sign, Pound Key

Microphone: The MICROPHONE is found under the pound key.
An Internal Speakerphone is found on each side of the phone, in
the area of rows 7-9 of the keypad.

###2 Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, Illinois 60196
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States)
1-800-461-4575 (Canada)
www.motorola.com (United States)
www.motorola.ca (Canada)

MOTOROLA and the Stylized M Logo are registered in the US Patent
& Trademark Office. All other product or service names are the property
of their respective owners. TrueSync, Starfish, and the Stylized
Starfish Logo are registered trademarks of Starfish Software, Inc.,
a wholly owned subsidiary of Pumatech, Inc.

(c) Motorola, Inc. 2003.
SOFTWARE COPYRIGHT NOTICE

The Motorola products described in this manual may include
copyrighted Motorola and third party software stored in semiconductor
memories or other media. Laws in the United States and other countries
preserve for Motorola and third party software providers certain
exclusive rights for copyrighted software, such as the exclusive rights
to distribute or reproduce the copyrighted software. Accordingly, any
copyrighted software contained in the Motorola products may not be
modified, reverse-engineered, distributed, or reproduced in any manner
to the extent allowed by law. Furthermore, the purchase of the Motorola
products shall not be deemed to grant either directly or by implication,
estoppel, or otherwise, any license under the copyrights, patents,
or patent applications of Motorola or any third party software provider,
except for the normal, non-exclusive, royalty-free license to use that
arises by operation of law in the sale of a product.

Manual number: 6809474A61-O

###3 CONTENTS

WELCOME ............................................................. 1

SAFETY AND GENERAL INFORMATION ....................................... 6

GETTING STARTED .................................................... 12

What's in the Box? .................................................. 12

About This Guide .................................................... 12

Installing the Battery ............................................. 13

Charging the Battery ............................................... 14

Battery Use ........................................................ 15

Changing the Convertible Covers .................................... 16

Turning On Your Phone .............................................. 18

Making a Call ....................................................... 18

Ending a Call ....................................................... 19

Answering a Call ................................................... 19

Seeing Your Phone Number ........................................... 19

LEARNING TO USE YOUR PHONE ......................................... 20

Using the Display .................................................. 20

Using Menus ........................................................ 22

Selecting a Feature ................................................ 23

Entering Feature Information ........................................ 24

Entering Text ...................................................... 26

Zooming In and Out .................................................. 33

Using the Status Light ............................................. 34

Adjusting the Volume ................................................ 35

Using the PTT Button ............................................... 35

Using the External Display ......................................... 36

Locking and Unlocking Your Phone .................................... 36

Lock Your Phone Manually ........................................... 37

Changing a Code or Password ................................... 38 ###4

If You Forget a Code or Password ................................... 39

SETTING UP YOUR PHONE ............................................... 40

Setting the Time and Date .......................................... 40

Setting a Ring Style ............................................... 40

Setting Answer Options ............................................. 41

Setting a Screen Saver Image ....................................... 41

Zooming In and Out ................................................. 42

Setting Display Contrast ........................................... 42

Adjusting the Backlight ............................................ 43

Personalizing Display Text ......................................... 43

PUSH-TO-TALK (PTT) CALLS ........................................... 44

Private One-to-One Calls ........................................... 44

Group Calls ......................................................... 45

Setting Up Your Contacts List ...................................... 45

Viewing Your PTT Contacts List ..................................... 45

Sorting Your PTT Contacts List ...................................... 45

Turning On/Off the Speakerphone .................................... 47

PTT Calling States ................................................. 48

Basic PTT Instructions ............................................. 51

Making PTT Calls ................................................... 52

Answering PTT Calls ................................................ 57

CALLING FEATURES ................................................... 61

Changing the Active Line ........................................... 61

Redialing a Number ................................................. 61

Using Automatic Redial .............................................. 61

Using Caller ID .................................................... 62

Canceling an Incoming Call or PTT Alert ............................ 62

Turning Off a Call Alert ........................................... 63

Calling an Emergency Number ......................................... 63

Viewing Recent Calls ............................................... 63

Returning an Unanswered Call ........................................ 64

Using the Notepad ............................................. 65 ###5

Attaching a Number .................................................. 65

Calling With Speed Dial ............................................. 66

Calling With One-Touch Dial ........................................ 66

Using Voicemail ..................................................... 66

Muting the Phone ................................................... 69

Using Call Waiting ................................................. 69

Calling a Number In a Text Message ................................. 69

PHONE FEATURES ...................................................... 71

SPECIFIC ABSORPTION RATE DATA ...................................... 83

MOTOROLA LIMITED WARRANTY FOR THE UNITED STATES AND CANADA ......... 93

PRODUCT REGISTRATION ............................................... 98

INDEX ............................................................... 99

WIRELESS PHONE SAFETY TIPS ......................................... 107

###6 SAFETY AND GENERAL INFORMATION

IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.

READ THIS INFORMATION BEFORE USING YOUR PHONE.

The information provided in this document supersedes the general

safety information in user guides published prior to December 1, 2002.

EXPOSURE TO RADIO FREQUENCY (RF) ENERGY

Your phone contains a transmitter and a receiver. When it is ON,

it receives and transmits RF energy. When you communicate with your

phone, the system handling your call controls the power level at which

your phone transmits.

Your Motorola phone is designed to comply with local regulatory

requirements in your country concerning exposure of human beings to

RF energy.

OPERATIONAL PRECAUTIONS

To assure optimal phone performance and make sure human exposure

to RF energy is within the guidelines set forth in the relevant

standards, always adhere to the following procedures.

EXTERNAL ANTENNA CARE

Use only the supplied or Motorola-approved replacement antenna.

Unauthorized antennas, modifications, or attachments could damage the

phone.

Do NOT hold the external antenna when the phone is IN USE. Holding

the external antenna affects call quality and may cause the phone to

operate at a higher power level than needed. In addition, use of

unauthorized antennas may result in non-compliance with the local

regulatory requirements in your country. ###7 PHONE OPERATION

When placing or receiving a phone call, hold your phone as you

would a wireline telephone.

BODY-WORN OPERATION

To maintain compliance with RF energy exposure guidelines, if

you wear a phone on your body when transmitting, always place the phone

in a Motorola-supplied or approved clip, holder, holster, case, or

body harness for this phone, if available. Use of accessories not

approved by Motorola may exceed RF energy exposure guidelines. If you

do not use one of the body-worn accessories approved or supplied by

Motorola, and are not using the phone held in the normal use position,

ensure the phone and its antenna are at least 1 inch (2.5 centimeters)

from your body when transmitting.

DATA OPERATION

When using any data feature of the phone, with or without an

accessory cable, position the phone and its antenna at least 1 inch

(2.5 centimeters) from your body.

APPROVED ACCESSORIES

Use of accessories not approved by Motorola, including but not

limited to batteries and antenna, may cause your phone to exceed RF

energy exposure guidelines. For a list of approved Motorola accessories,

visit our website at www.Motorola.com.

RF ENERGY INTERFERENCE/COMPATIBILITY

NOTE: Nearly every electronic device is susceptible to RF energy

interference from external sources if inadequately shielded, designed,

or otherwise configured for RF energy compatibility. In some

circumstances your phone may cause interference.

FACILITIES

Turn off your phone in any facility where posted notices instruct

you to do so. These facilities may include hospitals or health care

facilities that may be using equipment that is sensitive to external

RF energy. ###8 AIRCRAFT

When instructed to do so, turn off your phone when on board an

aircraft. Any use of a phone must be in accordance with applicable

regulations per airline crew instructions.

MEDICAL DEVICES

--Pacemakers

Pacemaker manufacturers recommend that a minimum separation of

6 inches (15 centimeters) be maintained between a handheld wireless

phone and a pacemaker.

Persons with pacemakers should:

--ALWAYS keep the phone more than six inches (15 centimeters)

from your pacemaker when the phone is turned ON.

--NOT carry the phone in the breast pocket.

--Use the ear opposite the pacemaker to minimize the potential

for interference.

--Turn OFF the phone immediately if you have any reason to suspect

that interference is taking place.

--Hearing Aids

Some digital wireless phones may interfere with some hearing aids.

In the event of such interference, you may want to consult your hearing

aid manufacturer to discuss alternatives.

--Other Medical Devices

If you use any other personal medical device, consult the

manufacturer of your device to determine if it is adequately shielded

from RF energy. Your physician may be able to assist you in obtaining

this information.

USE WHILE DRIVING

Check the laws and regulations on the use of phones in the area

where you drive. Always obey them. ###9 When using your phone while

driving, please:

--Give full attention to driving and to the road.

--Use hands-free operation, if available.

--Pull off the road and park before making or answering a call

if driving conditions so require.

Responsible driving best practices may be found in the "Wireless

Phone Safety Tips" at the end of this manual and at the Motorola website:

www.Motorola.com/callsmart.

OPERATIONAL WARNINGS

FOR VEHICLES WITH AN AIR BAG

Do not place a phone in the area over an air bag or in the air

bag deployment area. Air bags inflate with great force. If a phone

is placed in the air bag deployment area and the air bag inflates,

the phone may be propelled with great force and cause serious injury

to occupants of the vehicle.

POTENTIALLY EXPLOSIVE ATMOSPHERES

Turn off your phone prior to entering any area with a potentially

explosive atmosphere, unless it is a phone type especially qualified

for use in such areas and certified as "Intrinsically Safe." Do not

remove, install, or charge batteries in such areas. Sparks in a

potentially explosive atmosphere can cause an explosion or fire

resulting in bodily injury or even death.

NOTE: The areas with potentially explosive atmospheres referred

to above include fueling areas such as below decks on boats, fuel or

chemical transfer or storage facilities, areas where the air contains

chemicals or particles, such as grain, dust, or metal powders. Areas

with potentially explosive atmospheres are often but not always posted.

BLASTING CAPS AND AREAS

To avoid possible interference with blasting operations, turn

OFF your phone when you are near electrical blasting caps, in a blasting

area, or in areas posted "Turn off electronic devices." Obey all signs

and instructions. ###10 BATTERIES

Batteries can cause property damage and/or bodily injury such

as burns if a conductive material such as jewelry, keys, or beaded

chains touch exposed terminals. The conductive material may complete

an electrical circuit (short circuit) and become quite hot. Exercise

care in handling any charged battery, particularly when placing it

inside a pocket, purse, or other container with metal objects.

only Motorola original batteries and chargers.

Your battery or phone may contain symbols, defined as follows:

Symbol: Definition

NOTE: Icons used--see original print manual for more information

on visually oriented icons.

Triangle: Important safety information will follow.

Crossed out fire: Your battery or phone should not be disposed

of in a fire.

Recycle logo: Your battery or phone may require recycling in

accordance with local laws. Contact your local regulatory authorities

for more information.

Crossed out trashcan: Your battery or phone should not be thrown

in the trash.

LiIon BATT: Your phone contains an internal lithium ion battery.

SEIZURES/BLACKOUTS

Some people may be susceptible to epileptic seizures or blackouts

when exposed to blinking lights, such as when watching television or

playing video games. These seizures or blackouts may occur even if

a person never had a previous seizure or blackout.

If you have experienced seizures or blackouts, or if you have

Use

a family history of such occurrences, please consult with your doctor

before playing video games on your phone or enabling a blinking-lights

feature on your phone. (The blinking-light feature is not available

on all products.) ###11 Parents should monitor their children's use

of video game or other features that incorporate blinking lights on

the phones. All persons should discontinue use and consult a doctor

if any of the following symptoms occur: convulsion, eye or muscle

twitching, loss of awareness, involuntary movements, or

disorientation.

To limit the likelihood of such symptoms, please take the

following safety precautions:

--Do not play or use a blinking-lights feature if you are tired

or need sleep.

--Take a minimum of a 15-minute break hourly.

--Play in a room in which all lights are on.

--Play at the farthest distance possible from the screen.

REPETITIVE MOTION INJURIES

When you play games on your phone, you may experience occasional

discomfort in your hands, arms, shoulders, neck, or other parts of

your body. Follow these instructions to avoid problems such as

tendonitis, carpal tunnel syndrome, or other musculoskeletal

disorders:

--Take a minimum 15-minute break every hour of game playing.

--If your hands, wrists, or arms become tired or sore while

playing, stop and rest for several hours before playing again.

--If you continue to have sore hands, wrists, or arms during or

after play, stop playing and see a doctor.

###12 GETTING STARTED

WHAT'S IN THE BOX?

Your digital wireless phone typically comes equipped with a

battery and a charger. Other accessory options can customize your phone

for maximum performance and portability. To purchase Motorola Original

(TM) accessories, contact the Motorola Customer Call Center at

1-800-331-6456 in the United States or 1-800-461-4575 in Canada.

ABOUT THIS GUIDE

This user's guide describes your Motorola wireless phone.

NOTE: A reference guide for your phone is also available that

describes your phone's features in more detail.

To obtain the reference guide for your phone or another copy of

this user's guide, see the Motorola Web site at:

http://motorola.com/consumer/manuals

or contact the Motorola Customer Call Center at 1-800-331-6456 in the

United States or 1-800-461-4575 in Canada. ###13 OPTIONAL FEATURES

(OPTIONAL FEATURE): This label identifies an optional network,

SIM card, or subscription-dependent feature that may not be offered

by all service providers in all geographical areas. Contact your

service provider for more information.

OPTIONAL ACCESSORIES

(OPTIONAL ACCESSORY): This label identifies a feature that

requires an optional Motorola Original (TM) accessory.

INSTALLING THE BATTERY

You must install and charge the battery to use your phone. Your

phone is designed to be used only with Motorola Original batteries

and accessories. We recommend that you store batteries in their

protective cases when not in use.

Action:

1. Remove the battery from its protective clear plastic case.

2. If necessary, push down the battery door release latch and

lift the door off of the phone.

NOTE: The battery compartment is located on the back of the phone

case. ###14 3. Insert the battery, printed arrow first, under the

tab at the top of the battery compartment and push down.

4. Insert the ridge at the bottom of the battery door into the

slot at the base of the phone, then push the door down and snap it

into place.

CHARGING THE BATTERY

New batteries are shipped partially charged. Before you can use

your phone, you need to install and charge the battery as described

below. Some batteries perform best after several full charge/discharge

cycles.

Action:

1. Plug the travel charger into your phone with the release tab

facing up. ###15 2. Plug the other end of the travel charger into

the appropriate electrical outlet.

3. When your phone indicates that the battery is fully charged

(Charge Complete), press the release tab and remove the travel charger.

NOTE: When you charge the battery, the battery level indicator

in the upper right corner of the display shows how much of the charging

process is complete.

BATTERY USE

Battery performance depends on many factors, including your

wireless carrier's network configuration; signal strength; the

temperature at which you operate your phone; the features and/or

settings you select and use; items attached to the phone's accessory

connector port; and your voice, data, and other application usage

patterns.

CAUTION: To prevent injuries or burns, do not allow metal objects

to contact or short-circuit the battery terminals.

To maximize your battery's performance:

--Always use Motorola Original (TM) batteries and

battery-chargers. The phone warranty does not cover damage caused from

using non-Motorola batteries and/or battery chargers.

--New batteries or batteries that have been stored for long

periods of time may require a longer charge time.

--Maintain the battery at or near room temperature when charging.

###16 --Do not expose batteries to temperatures below -10 degrees C

(14 degrees F) or above 45 degrees C (113 degrees F). Always take your

phone with you when you leave your vehicle.

--When you do not intend to use a battery for a while, store it

uncharged in a cool, dark, dry place, such as a refrigerator.

--Over extended periods of time, batteries gradually wear down

and require longer charging times. This is normal. If you charge your

battery regularly and notice a decrease in talk time or an increase

in charging-time, then it is probably time to purchase a new battery.

RECHARGEABLE: The rechargeable batteries that power this product

must be disposed of properly and may need to be recycled. Refer to

your battery's label for battery type. Contact your local recycling

center for proper disposal methods. Never dispose of batteries in a

fire because they may explode.

CHANGING THE CONVERTIBLE COVERS

(OPTIONAL ACCESSORY)

You can replace the flip cover and battery cover on your phone

to personalize its appearance. Matching front and back cover sets are

available in a variety of colors and designs.

Your phone is designed to be used only with Motorola Original

accessories. See your Motorola retailer for these convertible covers.

###17 REMOVE A FLIP COVER

Action:

1. Open your flip phone

2. Press in the tiny silver release button.

3. While pressing the silver button in, slide the cover off.

ATTACH A FLIP COVER

Action:

1. Close your flip phone.

2. Line up the ridges on each side of the cover so they align

half

way.

with the slots on the phone.

3. Slide the cover onto the phone until it snaps into place. ###18

TURNING YOUR PHONE ON

Action: To

1. Open your phone: expose the keypad

2. Press and hold PWR key for 3 seconds: turn on your phone

3. If necessary, enter your 4-digit unlock code and press OK

(Right soft key): unlock your phone

The unlock code is originally set to 1234. Your service provider

may change this number before you receive your phone.

MAKING A CALL

Press: To

1. keypad keys: dial the phone number

TIP: If you make a mistake, press DELETE to delete the last digit,

or press and hold DELETE to clear all digits.

2. SEND: make the call ###19 ENDING A CALL

Press

END, or close the flip.

ANSWERING A CALL

When you receive a call, your phone rings and/or vibrates and

displays an incoming call message.

Press

SEND or ANSWER (Right soft key) or open the flip

NOTE: If your phone is locked, you must unlock it to answer the

call.

SEEING YOUR PHONE NUMBER

Press Menu, pound key

###20 LEARNING TO USE YOUR PHONE

See page 1 for a basic phone diagram.

USING THE DISPLAY

The

you are

(graphic display)

Labels at the bottom corners of the display show the current soft

key functions. A G (menu) indicator at the bottom center of the display

indicates that you can press M to enter the main menu. ###21 1.

Ring Style Indicator Shows the ring style setting.

--Loud ring

--Soft ring

--Vibrate

--Ring and vibrate

--Silent

2. Signal Strength Indicator: Vertical bars show the strength

of the network connection. You cannot make or receive calls when the

no signal indicator displays.

3. Digital or Analog Signal Indicator (OPTIONAL FEATURE): Shows

whether you are receiving a digital or analog signal.

4. In Use Indicator: Shows that a phone call is in progress.

5. PTT Indicator (OPTIONAL FEATURE): Shows that your phone is

connected to the PTT network and if the network is available or

unavailable.

OR

Roam Indicator (OPTIONAL FEATURE): Shows that your phone is

seeking or using another network system outside your home network.

NOTE: When the Roam indicator displays, you can still make and

receive PTT calls when you are in the 1X coverage area and connected

to the PTT network.

6. Location Information Indicator (OPTIONAL FEATURE): Indicates

when your Location Information is available or unavailable. ###22

7. Message Waiting Indicator (OPTIONAL FEATURE): Appears when

you receive a voicemail or text message.

8. Battery Level Indicator: Vertical bars show the battery charge

level. Recharge the battery when you see Low Battery and hear the low

battery alert.

9. Active Line Indicator (OPTIONAL FEATURE): Shows the current

active phone line.

10. Menu Indicator: Indicates that you can press M to enter the

main menu or open a feature sub-menu.

USING MENUS

From the idle display, press M to display the main menu.

SELECTING A MENU FEATURE

To select a menu feature, starting from the idle display:

Find the Feature: M: Messages; Inbox

This example shows that from the idle display, you must press

M, scroll to and select Messages from the main menu, then scroll to

and select Inbox. Use Scroll key to scroll, and the left/right soft

keys to select the functions in the bottom left and right corners of

idle display

on a call or using the menu.

not

diagram is the standard display you see when

the display. ###23 SELECTING A FEATURE

Some features require you to select an item from a list.

--Press Scroll key to scroll up or down to highlight the item

you want.

--In a numbered list, press a number key to highlight the item.

--In an alphabetized list, press a key multiple times to cycle

through the letters on the key and highlight the closest matching list

item. ###24 ENTERING FEATURE INFORMATION

Some features require you to enter information:

(graphic display:

--Press Scroll key to scroll down to other items

--Press CHANGE to enter or edit information

--Press CANCEL to exit without making changes. DONE appears when

you enter or edit information.)

--Enter numbers or text with the keypad.

--When an item has a list of possible values, press Pound or Star

key to scroll through and select a value.

--When an item has a list of possible numeric values, press a

number key to set the value.

--If you enter or edit information and do not want to save your

changes, press END to exit without saving. ###25 The message

center lets you compose and send text messages.

(graphic display)

--

--Press M to open sub-menu.

--Press INSERT to insert quick note, picture, or sound.

--Press CANCEL to exit without making changes.

When you enter text using the standard tap method the flashing

cursor changes to a

(graphic display)

--

--After 2 seconds, block cursor reverts to flashing cursor and

moves to next position.

--Press DELETE to delete character to left of insertion point.

--Press OK to accept and store text.

Multiple text entry methods make it easy for you to enter names,

numbers, and messages on your phone. ###26 ENTERING TEXT

Multiple text entry methods make it easy for you to enter names,

numbers, and messages on your phone.

CHOOSING A TEXT MODE

Press M from any text entry screen. The symbol for the active

method displays at the top of the text entry screen:

iTAP: Let the phone predict each word as you enter it. (see page

30.)

Tap Method: Enter letters, numbers, and symbols by pressing a

key 1 or more times. (see page 29.)

Numeric: Enter numbers only.

Symbol: Enter symbols only (see page 29).

Browse: Browse your phonebook or recent call lists to select a

Flashing cursor

Block cursor

indicates insertion point.

block cursor

indicates current highlighted character.

, and the soft key functions change:

name or number.

NOTE: The text mode you select remains active until you change

it by selecting another mode.

USING TAP METHOD

This is the standard mode for entering text on your phone.

Press M from any text entry screen and select the Tap Method menu

option. ###27 Press: To

1. A number key 1 or more times: select a letter, number, or symbol

shown in the "Character Chart" on page 28

2. Number keys: enter the remaining characters

3. OK: store the text when you are finished

GENERAL TEXT ENTRY RULES

Press a number key repeatedly to cycle through its characters.

See the "Character Chart" on page 28.

(graphic display)

--Press a number key as many times as necessary to enter desired

character at flashing cursor location.

--Press and hold a number key to cycle between text and numeric

entry modes.

--Press Scroll to change letter in block cursor to uppercase or

lowercase.

--Press Pound or Star key to the left or right in text message.

###28 --If you do not press a key for 2 seconds, the character in the

block cursor is accepted, and the cursor moves to the next position.

--The first character of every sentence is capitalized. Press

Scroll key down to force the character to lowercase while it is

highlighted by the block cursor.

CHARACTER CHART

Use this chart as a guide for entering characters with the tap

method.

1-key: Space, Period, 1, Question mark, Exclamation point, Comma,

"at" sign, Underscore, Ampersand, Tilde, Colon, Semicolon, Quotation

mark, Hyphen, Open parentheses, Close parentheses, Apostrophe, Opening

interrogation mark, Opening exclamation point, Percent sign, British

Pound-Sterling sign, Dollar sign, Yen sign, Currency symbol, Euro sign

2-ABC: a, b, c, 2, Diaeresis a, Circle a, Acute a, Grave a,

Circumflex a, Tilde a, alpha, beta, Cedilla c

3-DEF: d, e, f, 3, delta, Diaeresis e, Acute e, Grave e, Circumflex

e, epsilon, phi

4-GHI: g, h, i, 4, Diaeresis i, Acute i, Circumflex i, gamma,

eta, iota

5-JKL: j, k, l, 5, kappa, lambda

6-MNO: m, n, o, 6, Tilde n, Diaeresis o, Slash o, Acute o, Grave

o, Circumflex o, Tilde o, mu, nu, omega

7-PQRS: p, q, r, s, 7, pi, German doubless, sigma

8-TUV: t, u, v, 8, Theta, Diaeresis u, Acute u, Grave u, Circumflex

u, tau

9-WXYZ: w, x, y, z, 9, xi, psi

0-key: Plus sign, Minus sign, 0, Times sign, Asterisk, Slash,

Back slash, Open bracket, Close bracket, Equal sign, Greater than sign,

Less than sign, Number sign (Or Pound sign), Section mark

NOTE: This chart may not reflect the exact character set available

on your phone. ###29 USING SYMBOL METHOD

Your phone provides an alternate way to enter symbol characters

in a message. Press M from any text entry screen and select the Symbol

menu option.

Press: To

1. Press a number key one time: display its symbol options at

the bottom of the display

See the next section, "Symbol Chart."

2. Star or Pound key, or press the number key multiple times:

highlight the symbol you want

3. SELECT (Right soft key): enter the symbol at the flashing

cursor location

SYMBOL CHART

Use this chart as a guide for entering characters in symbol

method.

1-key: Space, Period, Question mark, Exclamation point, Comma,

"at" sign, Underscore, Ampersand, Tilde, Colon, Semicolon, Quotation

mark, Hyphen, Open parentheses, Close parentheses, Apostrophe, Opening

interrogation mark, Opening exclamation point, Percent sign, British

Pound-Sterling sign, Dollar sign, Yen sign, Currency symbol, Euro sign

2-ABC: "At" sign, Underscore, Back slash

3-DEF: Forward slash, Colon, Semi-colon

4-GHI: Quotation mark, Ampersand, Apostrophe

5-JKL: Open parentheses, Close parentheses, Open bracket, Close

bracket, Open brace, close brace ###30 6-MNO: Opening

interrogation sign, Opening exclamation sign, Tilde

7-PQRS: Less-than sign, Greater-than sign, Equal sign

8-TUV: Dollar sign, British pound sterling sign, Yen sign,

Currency symbol, Euro sign

9-WXYZ: Pound sign, Percent sign, Asterisk

0-key: Plus sign, Minus sign, Times sign, Asterisk, Slash, Equal

sign, Greater than sign, Less than sign, Number sign (Or Pound sign),

Section mark

USING iTAP (TM) SOFTWARE PREDICTIVE TEXT ENTRY METHOD

iTAP software provides a predictive text entry method that lets

you enter a word using 1 keypress per letter.

Press M from any text entry screen and select the iTAP menu option.

NOTE: You can change languages within a message in iTAP text

method. Press M to select the text method and language you want to

use.

ENTER WORDS

Press: To

1. a number key 1 time: enter the first letter of the word

The letters associated with the key are shown at the bottom of

the display. ###31 2. number keys (1 per letter): enter the rest

of the word

Alternative words and letter combinations are shown at the bottom

of the display. The word choices are updated with each keystroke.

3. Star Pound key: highlight the word you want

4. SELECT (Right soft key): enter the word at the flashing cursor

location

A space is automatically inserted after the word.

For example, to spell the word "art," press 2, 7, 8.

The display shows: (display graphic)

Press DELETE (Left soft key) to clear last letter.

--Flashing cursor indicates insertion point.

--Press Navigation key to scroll and see additional word choices.

--Press SELECT (Right soft key) to insert highlighted word. ###32

ENTER NOVEL WORDS

You may enter a word that the iTAP software does not recognize.

If the word you want is not displayed:

Action:

1. Press DELETE (Left soft key) one or more times to delete letters

until you see a letter combination that matches the start of the word.

2. Press Star or Pound key to highlight the letter or letter

combination.

3. Press SELECT (Right soft key), then press Star key to shift

the text entry cursor to the left and "lock" the selected word portion.

4. Continue to enter letters and highlight letter combinations

to spell the word.

PUNCTUATION

Action

Press Star or Pound key to enter punctuation or other characters

as shown in the "Character Chart" on page 28.

CAPITALIZATION

The first word of a sentence is automatically capitalized, with

following words in lowercase.

Action

Press Scroll key up once to change the highlighted word or letters

to initial character capitalized. ###33 Press Scroll key up twice

to change the highlighted word or letters to uppercase characters.

Press Scroll key down once to change the highlighted word or

letters to lowercase characters.

ENTER NUMBERS

Press: To

1. the first digit and then highlight it: put the iTAP software

in number entry mode

2. number keys: add digits to the number

3. SELECT (Right soft key): enter the number at the flashing

cursor location

DELETE LETTERS AND WORDS

Place the cursor to the right of the text you want to delete,

and then do the following:

Press: To

DELETE (Left soft key): delete one letter at a time

Press and Hold DELETE (Left soft key): delete the entire message

ZOOMING IN AND OUT

Press and release M, then press and hold M to zoom the text in

and out on the display. Zoom in to increase text size, zoom out to

display more information. ###34 NOTE: You must continue to hold

M until you see the increase or decrease in text size.

USING THE STATUS LIGHT

The status light shows when you have an incoming call or message,

or when your phone is roaming (using a non-home system).

Indication: State

alternating red/green: incoming call

flashing green: in service, home system

flashing yellow: roaming, non-home system

flashing red: no service

The status light initially is turned off to extend battery life.

To turn it on, go to M: Settings; Other Settings; Initial Setup; Status

Light.

NOTE: Turning on the status light substantially reduces your

phone's standby time, the length of time that your phone's battery

retains power when the phone is turned on but is not in use. ###35

ADJUSTING THE VOLUME

Press the up and down volume buttons to:

--increase and decrease earpiece volume during a call

--increase and decrease the ringer volume setting when the idle

display is visible (flip must be open)

TIP: At the lowest volume setting, press the down volume button

to switch to silent alert. Press the up volume button to reset ring

alert.

--turn off an incoming call alert

USING THE PTT BUTTON

Press the PTT button (I) for immediate access to your PTT Contacts

list (flip must be open). For detailed information, see "Push-to-Talk

(PTT) Calls" on page 44.

NOTE: If the PTT network is not available, U Network Not Available

displays briefly. ###36 USING THE EXTERNAL DISPLAY

When the flip is closed, the external display shows the time and

date. It also displays messages to notify you of incoming phone and

PTT calls and other events. You can perform the following functions

in the external display.

NOTE: Because the microphone and earpiece are unavailable when

the phone is closed, you must use a headset or other handsfree device

with this feature.

LOCKING AND UNLOCKING YOUR PHONE

You can lock your phone manually or set the phone to lock

automatically whenever you turn it off.

To use a locked phone, you must enter the unlock code. A locked

phone still rings or vibrates for incoming calls or messages, but you

must unlock it to answer.

You can make emergency calls on your phone even when it is locked.

For more information, see page 63. ###37 LOCK YOUR PHONE MANUALLY

Find the Feature: M: Settings; Security; Phone Lock; Lock Now

Press: To

1. keypad keys: enter your unlock code

2. OK (Right soft key): lock the phone

SET YOUR PHONE TO LOCK AUTOMATICALLY

You can set your phone to lock every time you turn it off.

Find the Feature: M: Settings; Security; Phone Lock; Automatic

Lock; On

Press: To

1. keypad keys: enter your unlock code

2. OK (Right soft key): activate automatic lock

UNLOCK YOUR PHONE

At the Enter Unlock Code prompt:

Press: To

1. keypad keys: enter your unlock code

2. OK (Right soft key): unlock your phone ###38 CHANGING A CODE

OR PASSWORD

Your phone's unlock code is originally set to 1234, and the

security code is originally set to 000000. Your service provider may

reset these numbers before you receive your phone.

If your service provider has not reset these numbers, we recommend

that you change them to prevent other users from accessing your personal

information. The unlock code must contain 4 digits, and the security

code must contain 6 digits.

NOTES:

--Your service provider may retain your phone's security code

for customer service purposes. In this case, you will not be able to

use phone features that require you to enter the security code.

--If the unlock code is the only code you can change, the New

Passwords menu is not available. In this case, change the unlock code

by selecting: M: Settings; Security; Phone Lock; Unlock Code.

To change a code or password:

Find the Feature: M: Settings; Security; New Passwords

Press: To

1. Scroll key: scroll to the code or password

2. CHANGE (Right soft key): select the code or password

3. keypad keys: enter your old code ###394. OK (Right soft key):

submit your old code

5. keypad keys: enter the new code

6. OK (Right soft key): assign the new code

7. keypad keys: re-enter the new code

8. OK (Right soft key): confirm the new code

IF YOU FORGET A CODE OR PASSWORD

If you forget your security code, contact your service provider.

If you forget your unlock code, try entering 1234 or the last

4 digits of your phone number. If that does not work, do the following

at the Enter Unlock Code prompt:

Press: To

1. M: go to the unlock code bypass screen

2. keypad keys: enter your security code

3. OK (Right soft key): submit your security code

###40 SETTING UP YOUR PHONE

SETTING THE TIME AND DATE

You must set the time and date to use the datebook.

Find the Feature: M; Settings; Initial Setup; Time and Date

SETTING A RING STYLE

Your phone rings or vibrates to notify you of an incoming call

or other event. This ring or vibration is called an

select 1 of 5 different ring styles:

NOTE: Icons used--see original print manual for more information

on visually oriented icons.

--Loud

--Soft

--Vibrate

--Ring and vibrate

--Silent

The ring style indicator in the display shows the current ring

style (see page 20).

To set a ring style:

Find the Feature: M; Ring Styles; Style

Press: To

1. Scroll key: scroll to the ring style

2. SELECT (Right soft key): select the ring style ###41 Each

ring style contains settings for specific event alerts, ringer ID,

and ringer and keypad volume. To change these settings, press M: Ring

Styles; Style Detail.

SETTING ANSWER OPTIONS

You can use different methods to answer an incoming call.

Find the Feature: M: Settings; In-Call Setup; Answer Options

The Answer Options menu includes:

Multi-Key: answer by pressing any key

Open to Answer: answer by opening the flip

SETTING A SCREEN SAVER IMAGE

You can set a picture or animation as a screen saver image.

The screen saver image is displayed when the flip is open and

no activity is detected for a period of time.

The screen saver image is shrunk to fill the display, if necessary.

On some networks, an animation repeats for 1 minute and then stops.

Find the Feature: M: Settings; Other Settings; Personalize;

Screen Saver

Press: To

1. Scroll key: scroll to Picture

2. CHANGE (Right soft key): open the picture viewer ###42

3. Scroll key up or down: scroll to a picture/animation

Scroll to (None) to turn off the screen saver image.

4. SELECT: select the image

alert

. You can

5. Scroll key: scroll to Delay

6. CHANGE (Right soft key): set the delay interval

7. Scroll key: scroll to the inactivity interval that triggers

the screen saver

8. SELECT (Right soft key): confirm the delay setting

9. DONE (Left soft key): save screen saver settings

ZOOMING IN AND OUT

Press and release M, then press and hold M to zoom in and out

on display text. Zoom in to increase text size, zoom out to display

more information.

You can also zoom in and out from the menu:

Find the Feature: M: Settings; Other Settings; Initial Setup;

Zoom

SETTING DISPLAY CONTRAST

Find the Feature: M: Settings; Other Settings; Initial Setup;

Contrast ###43 ADJUSTING THE BACKLIGHT

You can set the amount of time that the display backlight remains

on, or turn off the backlight to conserve battery power.

Find the Feature: M: Settings; Other Settings; Initial Setup;

Backlight

PERSONALIZING DISPLAY TEXT

To change the greeting that displays when you turn on your phone:

Find the Feature: M: Settings; Other Settings; Personalize;

Greeting

###44 PUSH-TO-TALK (PTT) CALLS

PTT is a two-way feature that lets you talk walkie-talkie style

with other PTT subscribers. With PTT, you can start a Private One-to-One

call to communicate with an individual, or you can start a Group Call

to communicate with a group of people at the same time. You can start

a PTT call by:

--Selecting a name or number from your PTT contacts list

--Entering a PTT number from the keypad

--Selecting a name or number from your Dialed Calls, Received

Calls, or Phonebook lists

PRIVATE ONE-TO-ONE CALLS

You can start a Private call to 1 person either as an Alert or

Barge call.

--Alert call sends a call alert tone to inform the person of your

incoming call.

--Barge call lets you talk immediately to the called person

without sending a call alert tone. ###45 GROUP CALLS

You can start a Group call with all available members of a group

that you have set up in your PTT contacts list. However, as with a

Private call, you cannot start a Group call as an Alert call, only

as a Barge call.

SETTING UP YOUR CONTACTS LIST

You can set up your contacts list by going to the Push-to-Talk

(PTT) contacts management website given to you by your service

provider.

VIEWING YOUR PTT CONTACTS LIST

To see the contacts in your PTT contacts list, press the

push-to-talk (PTT) button (I) from the idle display. Presence icons

display to the left of the individual or group names to indicate online

or offline status. When an individual is online, (icon) displays. When

a group is online, (icon) displays. When an individual or group is

offline, X displays.

SORTING YOUR PTT CONTACTS LIST

After you have set up your PTT contacts list, you can sort it

by name or by status. When you sort by name, the list displays in

alphabetical order. When you sort by status (online/offline), the list

displays the first available online contact, by presence icon, in

alphabetical order. ###46 Press: To

1. PTT button: display the PTT Contacts list

2. M: display the Contacts Menu

3. Scroll key: highlight Setup

4. SELECT (Right soft key): display the Setup menu

5. CHANGE (Right soft key): display the Sort by menu

6. Scroll key: highlight Name or Status

7. SELECT (Right soft key): sort the list

8. DONE (Left soft key): exit

"OPEN TO" SORTING IN PTT CONTACTS LIST

You can sort your PTT contacts list alphabetically by name (Top

of List), or by the last call you received (Last Call).

Press: To

1. PTT button: display the PTT Contacts list

2. M: display the Contacts Menu

3. Scroll key: highlight Setup

4. SELECT (Right soft key): display the Setup menu

5. Scroll key: highlight Open To

6. CHANGE (Right soft key): display the

7. Scroll key: highlight Top of List or Last Call

8. SELECT (Right soft key): sort the list

9. DONE (Left soft key): exit ###47 TURNING ON/OFF THE

SPEAKERPHONE

Your PTT and wireless phone has a high-quality, dedicated internal

speakerphone.

Press: To

Speakerphone key: turn on or turn off the speakerphone during

a PTT call

SPEAKER (Left soft key) when displayed: turn on or turn off the

speakerphone

When SPEAKER displays, the speakerphone is off. When (darkened

SPEAKER) displays, the speakerphone is on.

For privacy, turn off the speakerphone and use the earpiece for

listening.

NOTES:

--To set the speakerphone to Always On or to a 20 sec timeout,

see page 78.

--When you turn off your phone, the speakerphone resets to Off.

###48 PTT CALLING STATES

Presence icons indicate when individuals and/or groups in your

contacts list are online. Call tones, text, and icons keep you informed

of the calling state during PTT calls, refer to the following sections.

PRESENCE ICONS

The table below shows the icons displayed in the PTT contacts

list to indicate if an individual or group is available for PTT calls.

NOTE: Icons used--see original print manual for more information

on visually oriented icons. Icons indicate the following:

--User is online.

--Group is online.

--Individual or group is offline.

CALL TONES

The table below describes the call tones sent and received during

PTT calls.

NOTE: These tones can not be customized.

Tone:Description

Alert Tone: When you start or receive an Alert call, 2 short

high-pitched beeps sound.

Ring Back: When you alert a called party, a high-pitched rhythmic

tone sounds. ###49 Announce Barge Call: When you receive a Barge

call, 2 short low-pitched beeps sound.

Open To

menu

OK to Talk: A short chirp sounds to let you know you can talk.

Floor Control Available: When the other party has floor control

and you press PTT button, a long beep sounds.

Floor Control Unavailable: After the other party releases PTT

button, a short beep sounds.

Busy Tone: When you call a party who is already on another call,

3 long beeps sound.

Call Refused or Unavailable: When the called party is unavailable

to take your call, a long beep (same as Floor Control Unavailable)

sounds.

ICONS AND TEXT

The table below describes the icons and text displayed on the

screen during PTT calls.

NOTE: Icons used--see original print manual for more information

on visually oriented icons. Icons indicate the following:

--To Alert, Press and Release PTT Button: After you have selected

a contact to send an Alert call to.

--Alerting ... John: After you press PTT button when sending

an Alert call. ###50 --Alert from John: When you receive an Alert call.

--Connecting ... John: When you are calling an individual.

--Connecting ... Group: When you are calling a group.

--Talking to John: When you are talking to an individual and you

have floor control.

--Talking to SalesTeam: When you are talking to a group and you

have floor control.

--Listening to John: When a member of group is talking and has

floor control.

NOTE: When a member of a group is talking, the member's name

displays, not the group name.

--Connected John: When connected to an individual and floor

control is available.

--Connected Group: When connected to a group and floor control

is available.

--Call Ended John: When an individual call has ended. ###51

--Call Ended Group: When a group call has ended.

John Busy: When the called party is on another call.

Alert Failed: When the network cannot be accessed while attempting

to start an Alert call.

Call Failed: When the network cannot be accessed while attempting

to start a Barge call.

John Unavailable: When the called party is unavailable, offline,

does not respond to the incoming call, or presses IGNORE (Left soft

key).

BASIC PTT INSTRUCTIONS

The table below describes actions during PTT calls.

NOTE: The actions are not necessarily in the exact order of

events.

Action:

From the idle display, press and release the PTT button to display

the PTT contacts list.

NOTE: There are other ways to select a contact (see page 52.).

Highlight a name, group, or number to call. ###52 Press

ALERT (Right soft key), then press and release the PTT button, and

wait for the OK to Talk Tone

NOTE: This action applies to Alert calls only.

After the OK to Talk tone, press and hold the PTT button and begin

talking.

IMPORTANT: If you do not wait for the OK to Talk tone, part of

your message may be lost.

Press and hold the PTT button to start a Barge call with a

highlighted group.

NOTE: This action applies to Barge calls only.

If no one talks (the PTT button is not pressed and held) for 20

seconds or more during a call, the call automatically disconnects.

Press END to return to the idle display, or close the flip.

Release the PTT button to make floor control available. Press

EXIT (Left soft key) or END to end the call.

MAKING PTT CALLS

When 1X displays at the top of the screen, you can make and receive

PTT calls.

IMPORTANT: Refer to "PTT Calling States" on page 48 for

information about alert tones, icons, and text displays. ###53

MAKING A BARGE CALL FROM THE PTT CONTACTS LIST

Action

1. Press the PTT button to display the PTT Contacts list

2. Highlight the name or number of the group to call

3. To start the call, press and hold the PTT button, and wait

for the OK to Talk tone

4. After the OK to Talk tone, continue to hold the PTT button

and begin talking.

5. Release the PTT button to allow another party to talk

6. Press EXIT (Left soft key) or END to end the call

MAKING A BARGE CALL FROM THE IDLE DISPLAY USING THE KEYPAD

Action

1. From the idle display, enter the PTT number of the group to

call.

NOTE: As you enter the number, it is compared against entries

in the PTT contacts list for a match. If a match is found, the group

name replaces the number entered.

2. To start the call, press and hold the PTT button, and wait

for the OK to Talk tone.

3. After the OK to Talk tone, continue to hold the PTT button

and begin talking.

4. Release the PTT button to allow another party to talk.

5. Press EXIT (Left soft key) or END to end the call. ###54

MAKING A BARGE CALL FROM THE DIALED AND RECEIVED CALLS LIST

Find the Feature: M; Recent Calls

Action

1. Highlight Dialed Calls or Received Calls.

2. Press SELECT (Right soft key) to open the list.

3. Highlight the group name or number to call.

4. To start the call, press and hold the PTT button, and wait

for the OK to Talk tone.

5. After the OK to Talk tone, continue to hold the PTT button

and begin talking.

6. Release the PTT button to allow another party to talk.

7. Press EXIT (Left soft key) or P to end the call.

MAKING A BARGE CALL FROM THE PHONEBOOK

Find the Feature: M; Phonebook

Action

1. scroll through the Phonebook list and highlight the group name

or number to call.

2. To start the call, press and hold the PTT button, and wait

for the OK to Talk tone.

3. After the OK to Talk tone, continue to hold down the PTT button

and begin talking.

4. Release the PTT button to allow the other party to talk.

5. Press EXIT (Left soft key) or P to end the call. ###55

MAKING AN ALERT CALL FROM THE PTT CONTACTS

--LIST

Action

1. Press the PTT button to display the PTT Contacts list.

2. Highlight the name or number of the person to call.

3. To send the Alert Tone and start the call, press ALERT (Right

soft key), then press and release the PTT button.

4. After the called party responds, then releases floor control

to you, press and hold the PTT button, and wait for the OK to Talk

tone.

5. After the OK to Talk tone, continue to hold down the PTT button

and begin talking.

6. Release the PTT button to allow the other party to talk.

7. Press EXIT (Left soft key) or END to end the call.

MAKING AN ALERT CALL FROM THE IDLE DISPLAY USING THE KEYPAD

Action

1. From the idle display, enter the PTT number of the person to

call.

NOTE: As you enter the number, it is compared against entries

in the contacts list for a name match. If a match is found, the name

replaces the number.

2. Press M to display the Dialing Menu.

3. Highlight Alert. ###56 4. To send the Alert Tone and start

the call, press SELECT (Right soft key), then press and release the

PTT button.

5. After the called party responds and releases floor control

to you, press and hold the PTT button, and wait for the OK to Talk

tone.

6. After the OK to Talk tone, continue to hold down the PTT button

and begin talking.

7. Release the PTT button to allow the other party to talk.

8. Press EXIT (Left soft key) or END to end the call.

MAKING AN ALERT CALL FROM THE DIALED AND RECEIVED CALLS LIST

Find the Feature: M; Recent Calls

Action

1. Highlight Dialed Calls or Received Calls.

2. Press SELECT (Right soft key) to enter the highlighted list.

3. Highlight an entry from the list.

4. Press M to enter the Last Calls Menu.

5. Highlight Alert.

6. To send the Alert Tone and start the call, press SELECT (Right

soft key), then press and release the PTT button.

7. After the called party responds and releases floor control

to you, press and hold the PTT button, and wait for the OK to Talk

tone.

8. After the OK to Talk tone, continue to hold down the PTT button

and begin talking. ###57 9. Release the PTT button to allow the other

party to talk.

10. Press EXIT (Left soft key) or END to end the call.

MAKING AN ALERT CALL FROM THE PHONEBOOK

Find the Feature: M; Phonebook

Action

1. Highlight a phonebook entry.

2. Press M to display the Phonebook Menu.

3. Scroll to Alert.

4. To send the Alert Tone and start the call, press SELECT (Right

soft key), then press and release the PTT button.

5. After the called party responds and releases floor control

to you, press and hold the PTT button, and wait for the OK to Talk

tone.

6. After the OK to Talk tone, continue to hold down the PTT button

and begin talking.

7. Release the PTT button to allow the other party to talk.

8. Press EXIT (Left soft key) or END to end the call.

ANSWERING PTT CALLS

IMPORTANT: Refer to "PTT Calling States" on page 48 for

information about alert tones, icons, and text displays received while

answering PTT calls. ###58 ANSWERING A BARGE CALL

When you receive a Barge call (when the flip is open or closed),

the Announce Barge Call tone sounds and your phone immediately goes

into Listening mode.

Action

1. When the caller releases floor control to you, press and hold

the PTT button, and wait for the OK to Talk tone.

2. After the OK to Talk tone, continue to hold down the PTT button

and begin talking.

3. Release the PTT button to allow the other party to talk.

4. Press EXIT (Left soft key) or END to end the call.

ANSWERING AN ALERT CAL

When you receive an Alert call, the Alert Tone sounds and

(name or number) displays.

from

Action

1. After the Alert Tone, answer the call by pressing ANSWER (Right

soft key).

2. Press and hold the PTT button, and wait for the OK to Talk

tone.

Alert

3. After the OK to Talk tone, continue to hold down the PTT button

and begin talking.

4. Release the PTT button to allow the other party to talk.

5. Press EXIT (Left soft key) or END to end the call. ###59

ANSWERING AN ALERT CALL WHEN THE FLIP IS CLOSED

When you receive an Alert call, the Alert Tone sounds and Alert

from (name or number) appears on the external display.

Action

1. After the Alert Tone, answer the call by pressing and releasing

the PTT button.

2. Press and hold the PTT button, and wait for the OK to Talk

tone.

3. After the OK to Talk tone, continue to hold down the PTT button

and begin talking.

4. Release the PTT button to allow the other party to talk.

5. Open the flip, then press EXIT (Left soft key) or END to end

the call

CANCELING AN INCOMING CALL MISSED ALERT CAL

When an Alert call is missed, Missed Call displays.

Action

During the call alert tone, press END or IGNORE (Left soft key).

###60 NOTE: Your phone does not notify you of missed Barge calls.

Action

1. Press View (Right soft key) to display the Received Calls list.

2. Scroll through the list.

3. Press END to return the call

###61 CALLING FEATURES

For basic instructions on how to make and answer calls, see pages

18-19.

CHANGING THE ACTIVE LINE

(OPTIONAL FEATURE)

Change the active phone line to make and receive calls from your

other phone number.

Find the Feature: M; Settings; Phone Status; Active Line

The active line indicator in the display shows the current active

phone line. See page 22.

REDIALING A NUMBER

If you hear an ordinary busy signal:

Press: To

1. END: hang up

2. SEND: redial the busy number

USING AUTOMATIC REDIAL

If the network is busy, you hear a fast busy signal, and your

phone displays Call Failed. ###62 With automatic redial, your

phone automatically redials the number for four minutes. When the call

goes through, your phone rings or vibrates one time, displays Redial

Successful, and then connects the call.

You must turn on automatic redial to use the feature. See page

76.

When automatic redial is turned off, you can manually activate

the feature to redial a phone number. When you hear a fast busy signal

and see Call Failed:

Press: To

SEND or RETRY (Right soft key): activate automatic redial

USING CALLER ID

(OPTIONAL FEATURE)

INCOMING CALLS

Calling line identification (caller ID) displays the phone number

for incoming calls.

The phone displays the caller's name when the name is stored in

your phonebook, or Incoming Call when caller ID information is not

available.

CANCELING AN INCOMING CALL OR PTT ALERT

While the phone is ringing or vibrating:

Press: To

END or IGNORE (Left soft key): cancel the incoming call ###63

--(OPTIONAL FEATURE)

Depending on your phone settings and/or service subscription,

the call may be forwarded to voice mail, another number, or the caller

may hear a busy signal.

TURNING OFF A CALL ALERT

You can turn off your phone's incoming call alert before answering

the call.

Press: To

either volume button: turn off the alert

CALLING AN EMERGENCY NUMBER

Your service provider programs one or more emergency phone numbers,

such as 911, that you can call under any circumstances, even when your

phone is locked.

NOTE: Emergency numbers vary by country. Your phone's

pre-programmed emergency number(s) may not work in all locations, and

sometimes an emergency call cannot be placed due to network,

environmental, or interference issues.

Press: To

1. keypad keys: dial the emergency number

2. SEND: call the emergency number

VIEWING RECENT CALLS

Your phone keeps a list of the calls you recently received and

dialed, even if the calls did not connect. The lists are sorted from

newest to oldest entries. The oldest entries are deleted as new ones

are added. ###64 SHORTCUT: Press to go directly to the dialed calls

list from the idle display.

The Last Calls Menu can include the following options:

Option: Description

Store: Create a phonebook entry with the number in the

Delete: Delete the entry.

Delete All: Delete all entries in the list.

Send Message: Open a new text message with the number in the To

field.

Add Digits: Add digits after the number.

Attach Number: Attach a number from the phonebook or recent call

lists.

Send Tones: Send the number to the network as DTMF tones.

NOTE: This option appears only during a call.

RETURNING AN UNANSWERED CAL

Your phone keeps a record of your unanswered calls, and displays:

--the missed call indicator ###65 --X Missed Calls, where X

is the number of missed calls

Press: To

1. VIEW (Right soft key): see the received calls list

2. Scroll key: select a call to return

3. SEND: make the call

USING THE NOTEPAD

Your phone stores the most recent string of digits entered on

the keypad in a temporary memory location called the

can be a phone number that you called, or a number that you entered

but did not call. To retrieve the number stored in the notepad:

Find the Feature: M; Recent Calls; Notepad

ATTACHING A NUMBER

notepad

field.

No.

. This

While dialing (with digits visible in the display):

Press: To

M; Attach Number: attach a number from the phonebook or recent

call lists ###66 CALLING WITH SPEED DIAL

Each entry you store in your phonebook is assigned a unique speed

dial number. To speed dial a phonebook entry:

Press: To

1. keypad keys: enter the speed dial number for the entry you

want to call

2. Pound key: submit the number

3. SEND: call the entry

CALLING WITH ONE-TOUCH DIAL

To call phonebook entries 1 through 9, just press and hold the

single-digit speed dial number for 1 second.

We recommend that you reserve phonebook entry 1 (speed dial number

1) for storing and dialing your voicemail number. In many cases, your

service provider has already done this for you.

USING VOICEMAIL

NOTE: Voicemail does not apply to PTT calls. ###67 (OPTIONAL

FEATURE)

You can listen to your voicemail messages by calling your network

voicemail phone number. Voicemail messages are stored on the

network--not on your phone.

STORING YOUR VOICEMAIL NUMBER

(OPTIONAL FEATURE)

Voicemail messages that you receive are stored on the network.

To listen to your messages, you must call your voicemail phone number.

NOTE: Your service provider may include additional information

about using this feature.

LISTENING TO A VOICEMAIL MESSAGE

SHORTCUT: If your voicemail number is stored as phonebook entry

number 1, press and hold 1 to listen to your voicemail message(s).

Find the Feature: M: Messages; VoiceMail

Press: To

SEND: call your voicemail number and listen to the message

NOTE: If no voicemail number is stored, your phone prompts you

to store one. ###68 RECEIVING A VOICEMAIL MESSAGE

When you receive a voicemail message, your phone displays the

voice message waiting indicator and a New VoiceMail notification.

Press: To

CALL (Right soft key): listen to the message

The phone calls your voicemail phone number. If no voicemail

number is stored, your phone prompts you to store one.

STORING YOUR VOICEMAIL PHONE NUMBER

If necessary, use the following procedure to store your voicemail

phone number. Usually, your service provider has already done this

for you.

Find the Feature: M: Messages; M: VoiceMail Setup

Press: To

1. keypad keys: enter your voicemail number

2. OK (Right soft key): store the number

NOTE: You cannot store Pause, Wait, or n characters in this number.

If you want to store your voicemail number with these characters, create

a phonebook entry for it. Then, you can use the entry to call your

voicemail.

Additionally, your service provider may store your voicemail

number as phonebook entry number 1, so you can use one-touch dial to

listen to your voicemail messages. ###69 TURNING OFF THE VOICE

MESSAGE WAITING INDICATOR

To clear the voice message waiting indicator:

Find the Feature: M; Messages M; Clear Count

MUTING THE PHONE

To mute your phone during a call, press Right soft key, M.

USING CALL WAITING

(OPTIONAL FEATURE)

When you are on a call, an alert tone sounds to indicate that

you have received a second call.

CALLING A NUMBER IN A TEXT MESSAGE

(OPTIONAL FEATURE)

To call a phone number embedded in a text message that you receive,

highlight or open the message and then:

Press: To

1. M: open the Inbox Menu

2. Scroll key: scroll to Call Back ###70 3. SELECT (Right soft

key): call the number

###71 PHONE FEATURES

MAIN MENU

This is the standard main menu layout. Menu organization and

feature names may vary on your phone. Not all features may be available

for all users.

SHORTCUTS

Change display zoom: Press M, then press and hold M (does not

zoom graphics)

Display my phone number: Press M, Pound key

Dial voicemail number: Press and hold 1

Go to dialed calls list: Press SEND

Exit menu system: Press END

Go to PTT Contacts List: Press PTT button

PHONEBOOK

RECENT CALLS

--Received Calls

--Dialed Calls

--Notepad

--Call Times

MESSAGES

--Voicemail

--Create Message

--Inbox

--Outbox

--Quick Notes

--Drafts

--Browser Alerts

RADIO

BROWSER

SETTINGS (See page 72)

RING STYLES

--Style

--

--My Tones

PICTURE VIEWER

SHORTCUTS

CALCULATOR

DATEBOOK

VOICE RECORD ###72 SETTINGS MENU

RING STYLES

--Style

--

--My Tones

PHONE STATUS

--My Tel. Number

--Active Line

--Battery Meter

--Other Information

BROWSER SETUP

CONNECTION

--Incoming Call

Style

Style

Detail

Detail

IN-CALL SETUP

--In-Call Timer

--Answer Options

SECURITY

--Phone Lock

--Lock Application

--Restrict Calls

--New Passwords Location

OTHER SETTINGS

--Personalize

Main Menu

Keys

Greeting

Screen Saver

Banner

--Initial Setup

Time and Date

SpeakerPhone

Auto PIN Dial

Auto Redial

Backlight

Status Light

Zoom

TTY Setup

Scroll

Animation

Language

Contrast

DTMF

Master Reset

Master Clear

--Network

Current Network

Analog Only

Set Mode

Srvc Status

Service Tone

Call Drop Tone

--Car Settings

Auto Answer

Auto Hands-Free

Power-Off Delay

Charger Time

--Headset

Auto Answer ###73 FEATURE QUICK REFERENCE

You can do more with your phone than make and receive phone calls!

For example, you can store frequently called numbers in the phonebook

for easy dialing, organize your meetings and other events in the

datebook, browse the Web, download applications, send messages, and

more.

This chapter provides information to help you locate features

on your phone that are not described in this user's guide. For more

detailed information, see the reference guide.

CALLING FEATURES

Feature: Description

3-Way Call (OPTIONAL FEATURE): During a call--Dial third party's

number, press SEND to call, press SEND again to connect.

Restrict Calls (OPTIONAL FEATURE): Restrict outgoing or incoming

calls. M; Settings; Security; Restrict Calls

TTY Calls (OPTIONAL FEATURE): Set up your phone for use with an

optional TTY device. M: Settings; Other Settings; Initial Setup; TTY

Setup ###74 Send Messages: Send a text message. M; Messages; Create

Msg

Receive Message: Read a new text message that you have received:

Press READ (Right soft key)

PHONEBOOK

Feature: Description

Create Entry: Create a new phonebook entry. M; Phonebook; M; New

Dial Number: Call a number stored in the phonebook. M; Phonebook;

entry to call, SEND

Voice Name: Dial a number stored in the phonebook by speaking

its voice name. Press the voice key and say the entry's name within

2 seconds.

PERSONALIZING FEATURES

Feature: Description

Ring Style: Change the ring style. M; Ring Styles;

ring event ###75 Ring Volume: Adjust ringer volume. M; Ring Styles;

Style

Keypad Volume: Adjust ringer volume. M; Ring Styles;

Key Volume

My Tones: Compose your own ring tones, manage ring tones that

you have composed or downloaded. M; Ring Styles, My Tones

Soft Keys: Change soft key labels in the idle display. M; Settings;

Other Settings; Personalize; Keys

Shortcuts: Create a shortcut to a menu item: Highlight the menu

item, then press and hold M. Select a shortcut. M; Shortcuts; shortcut

name

Main Menu: Change the order of the main menu: M; Settings; Other

Settings; Personalize; Main Menu

MENU FEATURES

Feature: Description

Language: Set menu language. M; Settings; Other Settings; Initial

Setup; Language ###76 Master Reset: Reset all options

unlock code, security code, lifetime timer. M; Settings; Other Settings;

Initial Setup; Master Reset

Master Clear: Clear all options

lifetime timer, clear all user settings and entries. M; Settings; Other

Settings; Initial Setup; Master Clear

DIALING FEATURES

Feature: Description

Auto Redial: Turn on or turn off the automatic redial feature.

M: Settings; Other Settings; Initial Setup; Auto Redial

Detail; Ring Volume

except

unlock code, security code,

Style

Style

Detail;

Detail;

except

Auto PIN Dial (OPTIONAL FEATURE): Automatically dial an

authenticating PIN code for outgoing calls. M: Settings; Initial Setup;

Auto PIN Dial ###77 DTMF Tones: Activate DTMF tones. M; Settings;

Other Settings; Initial Setup; DTMF

Send DTMF tones during a call: Press number keys

Send stored numbers as DTMF tones during a call: Highlight a

number in the phonebook or recent call lists, then press M; Send Tones

CALL MONITORING FEATURES

Network connection time

connect to your service provider's network to the moment you end the

call by pressing the end key. This time includes busy signals and

ringing.

The amount of network connection time you track on your resettable

timer may not equal the amount of time for which you are billed by

your service provider. For billing information, please contact your

service provider directly.

Feature: Description

Call Times: View call timers. M; Recent Calls; Call Times ###78

In-Call Timer: Display time or cost information during a call.

M; Settings; In-Call Setup; In-Call Timer

HANDSFREE FEATURES

(OPTIONAL ACCESSORIES)

The use of wireless devices and their accessories may be

prohibited or restricted in certain areas. Always obey the laws and

regulations on the use of these products.

Feature: Description

Speaker-phone: Activate a connected external speakerphone during

a call. Press SPEAKERPHONE Button.

Auto Answer (headset): Automatically answer calls when connected

to a headset. M; Settings; Other Settings; Headset; Auto Answer

Voice Dial (headset): Activate voice dial on your headset's

send/end key. You can press the key and say a name to voice dial it.

M: Settings; Other Settings; Headset; Voice Dial

For more on voice dial, see page 74. ###79 Auto Answer (car

kit): Automatically answer calls when connected to a car kit. M;

Settings; Other Settings; Car Settings; Auto Answer

Auto Hands-Free (car kit): Automatically route calls to a car

kit when connected. M; Settings; Other Settings; Car Settings; Auto

Handsfree

Power-Off Delay (car kit): Set the phone to stay on for a period

of time after the ignition is switched off. M; Settings; Other Settings;

Car Settings; Power-Off Delay

Charger Time (car kit): Charge the phone for a period of time

after the ignition is switched off. M; Settings; Other Setttings; Car

Settings; Charger Time

DATA AND FAX CALLS

(OPTIONAL ACCESSORIES)

Feature: Description

is the elapsed time from the moment you

Send Data: Connect your phone to the device, then place the call

through the device application ###80 Receive Data: Connect your

phone to the device, then M; Settings; Connection; Incoming Call; Next

Call; Data In Only or

Fax In Only

Reset normal voice operation: M; More; Settings; Connection;

Incoming Call; Next Call; Normal

NETWORK FEATURES

Feature: Description

Network Settings (OPTIONAL FEATURE): View network information

and adjust network settings. M; Settings; Other Settings; Network

Hide or Show Location: To use the automatic location information

(ALI) feature to tell the network your location, M; Settings; Location

PERSONAL ORGANIZER FEATURES

Feature: Description

Add Datebook Event: Add an event to the datebook. M; Datebook;

day; M; New ###81 View Datebook Event: View or edit event details:

M; Datebook; day; event name

Respond to Event Reminder: When an event reminder displays, you

can press VIEW (Right soft key) to view the event, or EXIT (Left soft

key) to dismiss the reminder.

Record Messages and Calls: To record messages and phone calls:

Press and hold the voice key for the duration of the recording.

Play Voice Record: Play back a recording. M: Voice Record; voice

note

Calculator: Calculate numbers. M; Calculator

Currency Converter: Convert currency. M; Calculator; M; Exchange

Rate

Enter exchange rate, press OK (Right soft key), enter amount,

select dollar function

SECURITY FEATURES

Feature: Description

LOCK APPLICATION:

Lock phone features (for example, phonebook and datebook). M;

Settings; Security; Lock Application ###82 NEWS AND

ENTERTAINMENT FEATURES

Feature: Description

Launch Browser: Start a browser session. M: Browser

Picture Viewer: Manage pictures and animations. M: Picture Viewer

###83 SPECIFIC ABSORPTION RATE DATA

This model wireless phone meets the government's requirements

for exposure to radio waves.

Your wireless phone is a radio transmitter and receiver. It is

designed and manufactured not to exceed limits for exposure to radio

frequency (RF) energy set by the Federal Communications Commission

(FCC) of the U.S. Government and by the Canadian regulatory authorities.

These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The

guidelines are based on standards that were developed by independent

scientific organizations through periodic and thorough evaluation of

scientific studies. The standards include a substantial safety margin

designed to assure the safety of all persons, regardless of age or

health.

The exposure standard for wireless mobile phones employs a unit

of measurement known as the Specific Absorption Rate, or SAR. The SAR

limit set by the FCC and by the Canadian regulatory authorities is

1.6 W/kg. *1 Tests for SAR are conducted using standard operating

positions accepted by the FCC and by Industry Canada with the phone

transmitting at its highest certified power level in all tested

frequency bands. Although the SAR is determined at the highest

certified power level, the actual SAR level of the phone while operating

can be well below the maximum value. This is because the phone is

designed to operate at multiple power levels so as to use only the

power required to reach the network. In general, the closer you are

to a wireless base station, the lower the power output.

Before a phone model is available for sale to the public in the

U.S. and Canada, it must be tested and certified to the FCC and Industry

Canada that it does not exceed the limit established by each government

for safe exposure. The tests are performed in positions and locations

(e.g., at the ear and worn on the body) reported to the FCC and available

for review ###84 by Industry Canada. The highest SAR value for this

model phone when tested for use at the ear is 1.3 W/kg, and when worn

on the body, as described in this user guide, is 0.55 W/kg. (Body-worn

measurements differ among phone models, depending upon available

accessories and regulatory requirements). *2

While there may be differences between the SAR levels of various

phones and at various positions, they all meet the governmental

requirements for safe exposure. Please note that improvements to this

product model could cause differences in the SAR value for later

products; in all cases, products are designed to be within the

guidelines.

Additional information on Specific Absorption Rates (SAR) can

be found on the Cellular Telecommunications & Internet Association

(CTIA) Web site:

http://phonefacts.net

or the Canadian Wireless Telecommunications Association (CWTA) Web

site:

http://www.cwta.ca

*1. In the United States and Canada, the SAR limit for mobile

phones used by the public is 1.6 watts/kg (W/kg) averaged over one

gram of tissue. The standard incorporates a substantial margin of

safety to give additional protection for the public and to account

for any variations in measurements.

*2. The SAR information includes the Motorola testing protocol,

assessment procedure, and measurement uncertainty range for this

product.

###85 FDA

The U.S. Food and Drug Administration's Center for Devices and

Radiological Health Consumer Update on Mobile Phones

FDA has been receiving inquiries about the safety of mobile phones,

including cellular phones and PCS phones. The following summarizes

what is known--and what remains unknown--about whether these products

can pose a hazard to health, and what can be done to minimize any

potential risk. This information may be used to respond to questions.

Why the concern?

Mobile phones emit low levels of radio frequency energy (i.e.,

radio frequency radiation) in the microwave range while being used.

They also emit very low levels of radio frequency energy (RF),

considered nonsignificant, when in the stand-by mode. It is well known

that high levels of RF can produce biological damage through heating

effects (this is how your microwave oven is able to cook food). However,

it is not known whether, to what extent, or through what mechanism,

lower levels of RF might cause adverse health effects as well. Although

some research has been done to address these questions, no clear picture

of the biological effects of this type of radiation has emerged to

date. Thus, the available science does not allow us to conclude that

mobile phones are absolutely safe, or that they are unsafe. However,

the available scientific evidence does not demonstrate any adverse

health effects associated with the use of mobile phones.

What kinds of phones are in question?

Questions have been raised about hand-held mobile phones, the

kind that have a built-in antenna that is positioned close to the user's

head during normal telephone conversation. These types of mobile phones

are of concern because of the short distance between the phone's

antenna--the primary source of the RF--and the person's head. The

exposure to ###86 RF from mobile phones in which the antenna is located

at greater distances from the user (on the outside of a car, for example)

is drastically lower than that from hand-held phones, because a

person's RF exposure decreases rapidly with distance from the source.

The safety of so-called "cordless phones," which have a base unit

connected to the telephone wiring in a house and which operate at far

lower power levels and frequencies, has not been questioned.

How much evidence is there that hand-held mobile phones might be

harmful?

Briefly, there is not enough evidence to know for sure, either

way; however, research efforts are on-going. The existing scientific

evidence is conflicting and many of the studies that have been done

to date have suffered from flaws in their research methods. Animal

experiments investigating the effects of RF exposures characteristic

of mobile phones have yielded conflicting results. A few animal studies,

however, have suggested that low levels of RF could accelerate the

development of cancer in laboratory animals. In one study, mice

genetically altered to be predisposed to developing one type of cancer

developed more than twice as many such cancers when they were exposed

to RF energy compared to controls. There is much uncertainty among

scientists about whether results obtained from animal studies apply

to the use of mobile phones. First, it is uncertain how to apply the

results obtained in rats and mice to humans. Second, many of the studies

that showed increased tumor development used animals that had already

been treated with cancer-causing chemicals, and other studies exposed

the animals to the RF virtually continuously--up to 22 hours per day.

For the past five years in the United States, the mobile phone

industry has supported research into the safety of mobile phones. This

research has resulted in two findings in particular that merit

additional study:

1. In a hospital-based, case-control study, researchers looked

for an association between mobile phone use and either glioma (a type

of brain cancer) or acoustic neuroma (a benign tumor of the nerve

sheath). No statistically significant association was found between

###87 mobile phone use and acoustic neuroma. There was also no

association between mobile phone use and gliomas when all types of

types of gliomas were considered together. It should be noted that

the average length of mobile phone exposure in this study was less

than three years.

When 20 types of glioma were considered separately, however, an

association was found between mobile phone use and one rare type of

glioma, neuroepithelliomatous tumors. It is possible with multiple

comparisons of the same sample that this association occurred by chance.

Moreover, the risk did not increase with how often the mobile phone

was used, or the length of the calls. In fact, the risk actually

decreased with cumulative hours of mobile phone use. Most cancer

causing agents increase risk with increased exposure. An ongoing study

of brain cancers by the National Cancer Institute is expected to bear

on the accuracy and repeatability of these results. *1

2. Researchers conducted a large battery of laboratory tests to

assess the effects of exposure to mobile phone RF on genetic material.

These included tests for several kinds of abnormalities, including

mutations, chromosomal aberrations, DNA strand breaks, and structural

changes in the genetic material of blood cells called lymphocytes.

None of the tests showed any effect of the RF except for the micronucleus

assay, which detects structural effects on the genetic material. The

cells in this assay showed changes after exposure to simulated cell

phone radiation, but only after 24 hours of exposure. It is possible

that exposing the test cells to radiation for this long resulted in

heating. Since this assay is known to be sensitive to heating, heat

alone could have caused the abnormalities to occur. The data already

in the literature on the response of the micronucleus assay to RF are

conflicting. Thus, follow-up research is necessary. *2 ###88 FDA

is currently working with government, industry, and academic groups

to ensure the proper follow-up to these industry-funded research

findings. Collaboration with the Cellular Telecommunications Industry

Association (CTIA) in particular is expected to lead to FDA providing

research recommendations and scientific oversight of new CTIA-funded

research based on such recommendations.

Two other studies of interest have been reported recently in the

literature:

1. Two groups of 18 people were exposed to simulated mobile phone

signals under laboratory conditions while they performed cognitive

function tests. There were no changes in the subjects' ability to recall

words, numbers, or pictures, or in their spatial memory, but they were

able to make choices more quickly in one visual test when they were

exposed to simulated mobile phone signals. This was the only change

noted among more than 20 variables compared. *3

2. In a study of 209 brain tumor cases and 425 matched controls,

there was no increased risk of brain tumors associated with mobile

phone use. When tumors did exist in certain locations, however, they

were more likely to be on the side of the head where the mobile phone

was used. Because this occurred in only a small number of cases, the

increased likelihood was too small to be statistically significant.

*4

In summary, we do not have enough information at this point to

assure the public that there are, or are not, any low incident health

problems associated with use of mobile phones. FDA continues to work

with all parties, including other federal agencies and industry, to

assure that research is undertaken to provide the necessary answers

to the outstanding questions about the safety of mobile phones. ###89

What is known about cases of human cancer that have been reported in

users of hand-held mobile phones?

Some people who have used mobile phones have been diagnosed with

brain cancer. But it is important to understand that this type of cancer

also occurs among people who have not used mobile phones. In fact,

brain cancer occurs in the U.S. population at a rate of about 6 new

cases per 100,000 people each year. At that rate, assuming 80 million

users of mobile phones (a number increasing at a rate of about 1 million

per month), about 4800 cases of brain cancer would be expected each

year among those 80 million people, whether or not they used their

phones. Thus it is not possible to tell whether any individual's cancer

arose because of the phone, or whether it would have happened anyway.

A key question is whether the risk of getting a particular form of

cancer is greater among people who use mobile phones than among the

rest of the population. One way to answer that question is to compare

the usage of mobile phones among people with brain cancer with the

use of mobile phones among appropriately matched people without brain

cancer. This is called a case-control study. The current case-control

study of brain cancers by the National Cancer Institute, as well as

the follow-up research to be sponsored by industry, will begin to

generate this type of information.

What is FDA's role concerning the safety of mobile phones?

Under the law, FDA does not review the safety of

radiation-emitting consumer products such as mobile phones before

marketing, as it does with new drugs or medical devices. However, the

agency has authority to take action if mobile phones are shown to emit

radiation at a level that is hazardous to the user. In such a case,

FDA could require the manufacturers of mobile phones to notify users

of the health hazard and to repair, replace or recall the phones so

that the hazard no longer exists. ###90 Although the existing

scientific data do not justify FDA regulatory actions at this time,

FDA has urged the mobile phone industry to take a number of steps to

assure public safety. The agency has recommended that the industry:

--support needed research into possible biological effects of

RF of the type emitted by mobile phones

--design mobile phones in a way that minimizes any RF exposure

to the user that is not necessary for device function

--cooperate in providing mobile phone users with the best possible

information on what is known about possible effects of mobile phone

use on human health

At the same time, FDA belongs to an interagency working group

of the federal agencies that have responsibility for different aspects

of mobile phone safety to ensure a coordinated effort at the federal

level. These agencies are:

--National Institute for Occupational Safety and Health

--Environmental Protection Agency

--Federal Communications Commission

--Occupational Health and Safety Administration

--National Telecommunications and Information Administration

The National Institutes of Health also participates in this group.

###91 In the absence of conclusive information about any possible risk,

what can concerned individuals do?

If there is a risk from these products--and at this point we do

not know that there is--it is probably very small. But if people are

concerned about avoiding even potential risks, there are simple steps

they can take to do so. For example, time is a key factor in how much

exposure a person receives. Those persons who spend long periods of

time on their handheld mobile phones could consider holding lengthy

conversations on conventional phones and reserving the hand-held

models for shorter conversations or for situations when other types

of phones are not available.

People who must conduct extended conversations in their cars every

day could switch to a type of mobile phone that places more distance

between their bodies and the source of the RF, since the exposure level

drops off dramatically with distance. For example, they could switch

to:

--a mobile phone in which the antenna is located outside the

vehicle

--a hand-held phone with a built-in antenna connected to a

different antenna mounted on the outside of the car or built into a

separate package

--a headset with a remote antenna to a mobile phone carried at

the waist

Again, the scientific data do not demonstrate that mobile phones

are harmful. But if people are concerned about the radio frequency

energy from these products, taking the simple precautions outlined

above can reduce any possible risk. ###92 Where can I find additional

information?

For additional information, see the following Web sites:

Federal Communications Commission (FCC) RF Safety Program (select

"Information on Human Exposure to RF Fields from Cellular and PCS Radio

Transmitters"): http://www.fcc.gov/oet/rfsafety

World Health Organization (WHO) International Commission on

Non-Ionizing Radiation Protection (select Q's & A's):

http://www.who.int/emf

United Kingdom, National Radiological Protection Board:

http://www.nrpb.org.uk

Cellular Telecommunications Industry Association (CTIA):

http://www.wow-com.com

U.S. Food and Drug Administration (FDA) Center for Devices and

Radiological Health: http://www.fda.gov/cdrh/consumer/

*1. Muscat et al. Epidemiological Study of Cellular Telephone

Use and Malignant Brain Tumors. In: State of the Science Symposium;

1999 June 20; Long Beach, California.

*2. Tice et al. Tests of mobile phone signals for activity in

genotoxicity and other laboratory assays. In: Annual Meeting of the

Environmental Mutagen Society; March 29, 1999, Washington, D.C.; and

personal communication, unpublished results.

*3. Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S,

Lim, E, and Varkey, A. Effect of a 915-MHz simulated mobile phone signal

on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.

*4. Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild,

KH. Use of cellular telephones and the risk for brain tumors: a

case-control study. Int. J. Oncol., 15: 113-116, 1999.

###93 MOTOROLA LIMITED WARRANTY

FOR THE UNITED STATES AND CANADA

What Does this Warranty Cover?

Subject to the exclusions contained below, Motorola, Inc.

warrants its telephones, pagers, and consumer and professional two-way

radios (excluding commercial, government or industrial radios) that

operate via Family Radio Service or General Mobile Radio Service,

Motorola-branded or certified accessories sold for use with these

Products ("Accessories") and Motorola software contained on CD-ROMs

or other tangible media and sold for use with these Products ("Software")

to be free from defects in materials and workmanship under normal

consumer usage for the period(s) outlined below. This limited warranty

is a consumer's exclusive remedy, and applies as follows to new Motorola

Products, Accessories and Software purchased by consumers in the United

States or Canada, which are accompanied by this written warranty:

PRODUCTS AND ACCESSORIES

--Products Covered

Length of Coverage

--Products and Accessories as defined above, unless otherwise

provided for below.

One (1) year from the date of purchase by the first consumer

purchaser of the product unless otherwise provided for below.

--Decorative Accessories and Cases. Decorative covers, bezels,

PhoneWrap (TM) covers and cases.

Limited lifetime warranty for the lifetime of ownership by the

first consumer purchaser of the product.

--Monaural Headsets. Ear buds and boom headsets that transmit

mono sound through a wired connection.

--Limited lifetime warranty for the lifetime of ownership by the

first consumer purchaser of the product. ###94 --Consumer and

Professional Two-Way Radio Accessories.

Ninety (90) days from the date of purchase by the first consumer

purchaser of the product.

--Products and Accessories that are Repaired or Replaced.

The balance of the original warranty or for ninety (90) days from

the date returned to the consumer, whichever is longer.

EXCLUSIONS

NORMAL WEAR AND TEAR. Periodic maintenance, repair and

replacement of parts due to normal wear and tear are excluded from

coverage.

BATTERIES. Only batteries whose fully charged capacity falls

below 80 percent of their rated capacity and batteries that leak are

covered by this limited warranty.

ABUSE & MISUSE. Defects or damage that result from: (a) improper

operation, storage, misuse or abuse, accident or neglect, such as

physical damage (cracks, scratches, etc.) to the surface of the product

resulting from misuse; (b) contact with liquid, water, rain, extreme

humidity or heavy perspiration, sand, dirt or the like, extreme heat,

or food; (c) use of the Products or Accessories for commercial purposes

or subjecting the Product or Accessory to abnormal usage or conditions;

or (d) other acts which are not the fault of Motorola, are excluded

from coverage.

USE OF NON-MOTOROLA PRODUCTS AND ACCESSORIES. Defects or damage

that result from the use of Non-Motorola branded or certified Products,

Accessories, Software or other peripheral equipment are excluded from

coverage.

UNAUTHORIZED SERVICE OR MODIFICATION. Defects or damages

resulting from service, testing, adjustment, installation,

maintenance, alteration, or modification in any way by someone other

than Motorola, or its authorized service centers, are excluded from

coverage. ###95 ALTERED PRODUCTS. Products or accessories with (a)

serial numbers or date tags that have been removed, altered or

obliterated; (b) broken seals or that show evidence of tampering; (c)

mismatched board serial numbers; or (d) nonconforming or non-Motorola

housings, or parts, are excluded from coverage.

COMMUNICATION SERVICES. Defects, damages, or the failure of

Products, Accessories or Software due to any communication service

or signal you may subscribe to or use with the Products Accessories

or Software is excluded from coverage.

SOFTWARE

--Products Covered

Length of Coverage

--SOFTWARE. Applies only to physical defects in the media that

embodies the copy of the software (e.g. CD-ROM, or floppy disk).

Ninety (90) days from the date of purchase.

EXCLUSIONS

SOFTWARE EMBODIED IN PHYSICAL MEDIA. No warranty is made that

the software will meet your requirements or will work in combination

with any hardware or software applications provided by third parties,

that the operation of the software products will be uninterrupted or

error free, or that all defects in the software products will be

corrected.

SOFTWARE

embodied in physical media (e.g. software that is downloaded from the

internet), is provided "as is" and without warranty.

WHO IS COVERED?

This warranty extends only to the first consumer purchaser, and

is not transferable.

WHAT WILL MOTOROLA DO?

Motorola, at its option, will at no charge repair, replace or

refund the purchase price of any Products, Accessories or Software

that does not conform to this warranty. We may use functionally

equivalent ###96 reconditioned/refurbished/pre-owned or new Products,

Accessories or parts. No data, software or applications added to your

Product, Accessory or Software, including but not limited to personal

contacts, games and ringer tones, will be reinstalled. To avoid losing

such data, software and applications please create a back up prior

to requesting service.

EMBODIED IN PHYSICAL MEDIA. Software that is not

NOT

HOW TO OBTAIN WARRANTY SERVICE OR OTHER INFORMATION

USA Phones 1-800-331-6456

Pagers 1-800-548-9954

Two-Way Radios and Messaging Devices 1-800-353-2729

Canada All Products 1-800-461-4575

TTY 1-888-390-6456

For Accessories and Software, please call the telephone number

designated above for the product with which they are used.

You will receive instructions on how to ship the Products,

Accessories or Software, at your expense, to a Motorola Authorized

Repair Center. To obtain service, you must include: (a) a copy of your

receipt, bill of sale or other comparable proof of purchase; (b) a

written description of the problem; (c) the name of your service

provider, if applicable; (d) the name and location of the installation

facility (if applicable) and, most importantly; (e) your address and

telephone number.

WHAT OTHER LIMITATIONS ARE THERE?

Any implied warranties, including without limitation the implied
warranties of merchantability and fitness for a particular purpose,
shall be limited to the duration of this limited warranty, otherwise
the repair, replacement, or refund as provided under this express
limited warranty is the exclusive remedy of the consumer, and is
provided in lieu of all other warranties, express or implied. In no
event shall Motorola be liable, whether in contract or tort
(including negligence) for damages in excess of the purchase price
of the product, accessory or software, or for any indirect, incidental,
special or consequential damages of any kind, or loss of revenue or
profits, loss of business, loss of information or data, software or
applications or other financial loss arising out of or in connection
with the ability or inability to use the products, accessories or
software to the full extent these damages may be disclaimed by law.

Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights that vary from state to
state or from one jurisdiction to another.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola software
such as the exclusive rights to reproduce and distribute copies of
the Motorola software. Motorola software may only be copied into, used
in, and redistributed with, the Products associated with such Motorola
software. No other use, including without limitation disassembly of
such Motorola software or exercise of the exclusive rights reserved
for Motorola, is permitted. ###98PRODUCT REGISTRATION
Online Product Registration: http://www.motorola.com/warranty
Product registration is an important step toward enjoying your
new Motorola product. Registering helps us facilitate warranty service,
and permits us to contact you should your product require an update

###97

or other service. Registration is for U.S. residents only and is not
required for warranty coverage.
Please retain your original dated sales receipt for your records.
For warranty service of your Motorola Personal Communications Product
you will need to provide a copy of your dated sales receipt to confirm
warranty status.
Thank you for choosing a Motorola product.

EXPORT LAW ASSURANCES
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the United
States of America and Canada may restrict the exportation or
re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the Canadian
Department of Foreign Affairs and International Trade.

###99 INDEX

Numerics

3-way call 73

A
accessories

optional 73
standard 12

accessory connector port 1
active line indicator, defined 22
illustration 20
alert

creating 75
defined 40
turning off 63

analog signal indicator, defined 21
animation

screen saver 41, 42
viewing 82

answering a phone call 19
answering a push-to-talk (PTT) call 19
application, locking and unlocking 81
auto PIN dial 76
automatic answer 78, 79
automatic redial using 61-62

B
battery

car kit charger time 79
charging 14-15
extending battery life 15, 34
installing 13-14
level indicator 15, 20, 22

block cursor, defined 25
browse text mode 26
button

push-to-talk (PTT) 35
speakerphone 1
volume control 1, 35

C
calculator 81
call

3-way call 73
adding digits after phone number 64
alert, turning off 63
answer options 41
answering 19
call waiting 69 ###100 canceling 62
deleting 63
dialed calls list 63
emergency number 63
ending 19
muting 69

received calls list 63
receiving 19
recent calls 63
restricting 73
speakerphone 78
storing 63
timers 77, 78
unanswered phone call 64

Call Failed message 61
call waiting 69
caller ID 62, 65
calling line identification. See caller ID
car kit

automatic answer 78, 79
automatic hands free 79
charger time 79
power-off delay 79

clock 20
codes

changing 38
default 18, 38
forgotten code/password 39

contrast, display 42
convertible covers 16-17
cursor 25

D
data call

receive 80
send 79

date, setting 40
datebook 80
defined 35
deleting a call 63
dialed calls list 63
digital signal indicator, defined 21
display

contrast 42
described 20
idle display 20
language 75
zooming in/out 33, 42

DTMF tones

activating 77
sending 64, 77

E
earpiece volume, adjusting 35
emergency number 63
end key 1, 19 ###101
ending a call 19
Enter Unlock Code message 37, 39
external display 36

F
flashing cursor, defined 25
flip

external display 36
open to answer 41
turning the phone on 18

H
hands free use

automatic answer 78, 79
automatic call routing 79
charger time 79
power-off delay 79
speakerphone, activating 78
voice dial 78

hands-free mode, external display and 36
headset

automatic answer 78, 79
use with external display 36
voice dial 78

headset jack 1
hide location 80

I
idle display, defined 20
in use indicator, defined 21
Incoming Call message 62
incoming phone call, canceling 62
indicators

active line 20, 22
battery level 15, 20, 22
digital/analog signal 20, 21
in use 20, 21
location privacy 20
loud ring style 21, 40
menu 20, 22
message waiting 20, 21
missed call 64
push-to-talk (PTT) 20, 21
ring style 20, 21, 40
roam 21
signal strength 20, 21
silent alert 21, 40
silent ring style 21, 40
soft ring style 21, 40
vibrate and ring style 21, 40
vibrate style 21, 40
voice message waiting 22, 68, 69

iTAP software 30 ###102
K
key

end 1, 19
left soft key 1, 20, 75
menu 1, 22

power 1, 18
right soft key 1, 20, 75
scroll 1
send 1, 18, 64
voice 1

keypad

answering calls 41
volume, adjusting 75

L
language, setting 75
left soft key

functions 1, 20
personalizing 75

location information

hiding or showing 80

location privacy indicator 20
lock

application 81
phone 36

loud ring style indicator 21, 40
Low Battery message 22

M
master clear 76
master reset 76
menu

entering text 24
language, setting 75
lists 23
using features 23

menu indicator defined 22
menu key 1, 22
message

dialing number from 69
receiving 74
sending 74
voicemail 66

message waiting indicator defined 21
micro-browser using 82
microphone 1
missed call indicator 64
Missed Calls message 65
muting a call 69
my number 71
my tones 75

N
network settings 80
notepad 65
numeric text mode 26 ###103
O
one-touch dial defined 66

using 66

voicemail number 66

optional feature, defined 13
P

passwords. See codes
phone

active line indicator 22
active line, changing 61
alert, turning off 63
answer options 41
clear stored information 76
codes 38
date, setting 40
flip 18
keypad, answering calls 41
language, setting 75
locking 36
network settings 80
reset all options 76
security code 38
time, setting 40
turning on/off 18
unlock code 18, 38, 39
unlocking 18, 36

phone call, answering 19
phone number

active line indicator 22
active line, changing 61
adding digits after 64
attaching two numbers 64, 65
redialing 61
storing in phonebook 74
viewing your own 71

phonebook

attaching two numbers 64, 65
dialing a number 74
one-touch dial 66
speed dial number,
defined 66
speed dial, using 66
storing an entry 74
voice number dialing 74

picture

screen saver 41, 42
viewing 82

PIN code, dialing automatically 76
power 1
power key 1, 18
predictive text entry 30
push-to-talk (PTT) 44-60

basic instructions 51
button 1 ###104 call tones 48
calling states 48
calls 44

answering 57
display icons and text 49
functions 35
missed alert calls 59
presence icons 48
speakerphone 47

push-to-talk (PTT) calls

cancel incoming 59
group 45
making 52
private 44

push-to-talk (PTT) contacts list

open to sorting 46
setting up 45
sorting 45
viewing 45

push-to-talk (PTT) indicator, defined 21
push-to-talk (PTT)/telephone number, viewing your own 71

R
received calls list 63
recent calls 63
redial

automatic redial 61, 62
busy number 61

reference guide 12
restricting calls 73
right soft key

functions 1, 20
personalizing 75

ring alert, turning off 63
ring style

defined 41
indicators 21, 40
personalizing 41, 74

ring style indicator, defined 21, 40
ring tone, creating 75
ringer volume, adjusting 35
ringer volume, adjusting 75
roam indicator, defined 21

S
screen saver 41
scroll key 1
security code 38
send key 1, 18, 64
shortcuts, creating 75
show location 80 ###105
signal strength indicator, defined 21
silent alert indicator 21, 40
silent ring style indicator 21, 40
soft keys

functions 20
labels 20

personalizing 75

soft ring style indicator 21, 40
speakerphone, turn on/off 47
speakerphone, activating 78
speed dial

number, defined 66
using 66

standby time 34
status light 1, 34
storing a call 63
symbol text mode 29
symbols, entering 29

T
tap method text entry 26
text

block cursor 25
browse mode 26
character chart 28
entry mode, changing 26
flashing cursor 25
iTAP software predictive text entry 30
numeric mode 26
symbol chart 29
symbol mode 29
tap method 26

text message, dialing number from 69
text mode, changing 26
time, setting 40
timers 77, 78
travel charger, using 14
TTY device 73

U
unlock, application 81
unlock code 39

bypassing 39
changing 38
entering 18, 37

V
vibrate alert, turning off 6
vibrate and ring style, indicator 21, 40
vibrate style, indicator 21, 40 ###106
voice dial with a headset 78
voice key

dialing a number 74
functions 1

voice message waiting indicator 22, 68, 69
voice number, dialing 74
voice record 81
voicemail

dialing with one-touch dial 66
using 66

volume

earpiece 35
keypad 75
ringer 35, 75

volume buttons 1, 35
W

warranty 93-97
Web pages 82

Z
zooming in/out 33, 42

U.S. patent Re. 34,976

###107 WIRELESS PHONE
SAFETY TIPS
"Safety is your most important call!"
Your Motorola wireless telephone gives you the powerful ability
to communicate by voice--almost anywhere, anytime, wherever wireless
phone service is available and safe conditions allow. But an important
responsibility accompanies the benefits of wireless phones, one that
every user must uphold.
When driving a car, driving is your first responsibility. If you
find it necessary to use your wireless phone while behind the wheel
of a car, practice good common sense and remember the following tips:

1. Get to know your Motorola wireless phone and its features such
as speed dial and redial. If available, these features help you to
place your call without taking your attention off the road. ###108

2. When available, use a hands-free device. If possible, add an
additional layer of convenience to your wireless phone with one of
the many Motorola Original (TM) hands-free accessories available
today.

3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes from the road.
If you receive an incoming call at an inconvenient time, if possible,
let your voice mail answer it for you.

4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.

5. If you receive an incoming call at an inconvenient time do
not take notes or look up phone numbers while driving. Jotting down
a "to do" list or going through your address book takes attention away
from your primary responsibility--driving safely.

6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try to plan
calls when your car will be stationary. If you need to make a call
while moving, dial only a few numbers, check the road and your mirrors,
then continue.

7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with aware you are
driving and suspend conversations which have the potential to divert
your attention away from the road. ###109 8. Use your wireless phone
to call for help. Dial 9-1-1 or other local emergency number in the
case of fire, traffic accident or medical emergencies. *
* Wherever wireless phone service is available.

9. Use your wireless phone to help others in emergencies. If you
see an auto accident, crime in progress or other serious emergency
where lives are in danger, call 9-1-1 or other local emergency number,
as you would want others to do for you. *
* Wherever wireless phone service is available.

10. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you know to be
stolen, call roadside assistance or other special non-emergency
wireless number. *
* Wherever wireless phone service is available. ###110 Check

the laws and regulations on the use of wireless telephones and their
accessories in the areas where you drive. Always obey them. The use
of these devices may be prohibited or restricted in certain areas.
For more information, please call 1-888-901-SAFE or visit the
CTIA Web site at www.wow-com.com (TM)

motorola.com