Page 1
motorola
d
Portable Bluetooth
®
Hands-Free Speaker
BEFORE YOU
BEGIN
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
T305 Portable Bluetooth Hands-Free Speaker.
T305
1
Get connected in 4 quick steps.
CHARGE YOUR
HANDS-FREE SPEAKER
Charge your hands-free speaker's battery for
2 hours:
Charging
Por t
Multi-Color
Indicator Light
and Call Button
Volume
Up (+)
Button
(on side)
Power
Button
2
START BLUETOOTH
Microphone
Speaker
Volume
Down (-)
Button
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your hands-free speaker, you must turn
on the Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
Note: Do not place hands-free speaker with clip installed
on visor when charging.
Plug the Motorola charger into the charging
1
port on the end of the hands-free speaker.
The indicator light turns steadily red when the
battery is charging and the hands-free speaker
is turned off. It may take up to 1 minute for the
indicator light to turn on. When the hands-free
speaker's battery is fully charged (about 2
hours), the indicator light turns steadily blue.
Disconnect the charger.
2
Note: Hands-free speaker is functional while charging;
however, when charging the hands-free speaker while turne
on, the indicator light does not provide charging status.
Press (
1
Menu) > Settings > Connection >
M
Bluetooth Link > Setup.
2
Scroll to Power.
3
Select Change.
Scroll to On.
4
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones. For
other phones, see your phone's user's guide.
Page 2
3
PAIR
Your Hands-Free Speaker
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
Before you can use your hands-free speaker,
you must pair (link) it with your phone.
Step A - ENSURE HANDS-FREE SPEAKER IS
IN PAIRING MODE
To initiate easy pairing, power on hands-free
speaker by pressing and holding the Power
button until the indicator light becomes
steadily lit in purple. Release the button and,
after a few moments, the indicator light will be
steadily lit in blue to indicate hands-free
speaker is in pairing mode.
Indicator Light
(steadily blue
for pairing mode)
If the hands-free speaker does not enter
pairing mode, see TROUBLESHOOTING for
help.
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809503A47-A
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2006.
3
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HANDS-FREE SPEAKER
For most Motorola phones:
On your Motorola phone, press (
1
PAIR
CONTINUED
Your Phone
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola T305.
2
Select OK or Ye s to pair your hands-free
3
speaker with your phone.
Enter the passkey: 0000
4
Select OK.
5
When your hands-free speaker successfully
pairs with your phone, the indicator light
changes to flashing blue with quick purple
flashes.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
M
Menu) >
4
Your phone and hands-free speaker are now
paired and ready to make and receive calls. To
confirm they are operating properly, make a call:
Install visor clip and place hands-free speaker
1
onto your visor. See "Installing Hands-Free
Speaker in Car" on the reverse side of this guide
for details.
On your phone, dial the number you want to
2
call and press the Send key.
If your phone and hands-free speaker are
3
successfully paired, you will hear ringing on the
hands-free speaker.
After you have successfully paired your phone
and hands-free speaker, you don't need to
repeat these steps. For daily use, ensure that
your hands-free speaker is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, your hands-free speaker
will power down when not connected to your
phone for more than 30 minutes.
TEST AND USE
Page 3
USING YOUR T305
See
Features and
Functions Guide
on the reverse side
for information on
using your T305
TROUBLESHOOTING
My hands-free speaker will not enter pairing
mode.
Make sure that any devices previously paired with
the hands-free speaker are turned off. If the
indicator light is flashing in blue, turn off the other
device and wait for 10 seconds. The indicator light
becomes steadily lit in blue indicating the
hands-free speaker is now in pairing mode.
My phone does not find my hands-free speaker.
Make sure the indicator light on your hands-free
speaker is on and steadily lit in blue when your
phone is searching for devices (see step 3).
My hands-free speaker worked with my phone
before but now they are not working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was turned
on only temporarily, you may need to restart the
Bluetooth feature (see step 2) and pair your phone
and hands-free speaker again (see step 3).
Features and
Functions Guide
T305
Portable Bluetooth®
Hands-Free Speaker
IMPORTANT:
Be sure to first follow the
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
TURNING HANDS-FREE
SPEAKER ON AND OFF
To turn hands-free speaker on, press and hold
the Power button until the indicator light turns
purple. Then, release the button.
Note: Hands-free speaker may take up to 3 to 4 seconds to
turn on.
To turn your hands-free speaker off, press and
hold the Power button until the indicator light
turns purple and then turns off.
To conserve battery power, your hands-free
speaker will turn off when not connected to
your phone for more than 30 minutes.
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your T305.
Power Button
Indicator Light
Page 4
INSTALLING HANDS-FREE
INSTALLING HANDS-FREE
SPEAKER IN YOUR CAR
Follow these steps to install your hands-free
speaker in your car:
Slide the visor clip onto the mounting bracket
1
on the bottom of the hands-free speaker. To
do this, place the loop end first onto the
hands-free speaker and slide forward as
shown below.
SPEAKER IN YOUR CAR
Continued
Slide the visor clip onto your sun visor.
2
When installed, the Power button must be
facing toward you as shown.
The visor clip is reversible to allow placement
of your hands-free speaker on either the front
or the back of your car’s sun visor.
ADJUSTING HANDS-FREE
SPEAKER VOLUME
You can adjust hands-free speaker volume
using the Volume buttons. To adjust volume,
tap or press and hold button.
Volume
Up (+)
Button
Volume
Down (-)
Button
Note: Hands-free speaker volume cannot be adjusted
during an incoming call.
European Union Directives
Conformance Statement
Hereby, Motorola declares that this
product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
0168
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Product
Approval
Number
Page 5
MAKING CALLS
MAKING CALLS
CONTINUED
Function Action
Make a voice dial call Tap the Call button
and speak the
name after the tone
End a call Tap the Call button
(if a call is on hold,
tap twice to end all
calls)
Receive a call Tap the Call button
Reject a call Tap either Volume
button
Redial last call Press and hold the
Call button until you
hear a beep
Note: Your T305 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Function Action
Answer a second Press and hold the
incoming call Call button (places
first call on hold)
Toggle between two Press and hold
active calls the Call button
Mute or unmute a call Tap both Volume
buttons
Note: Some features are phone/network dependent.
Note: When turning on your hands-free speaker during a
phone call, audio is transferred automatically to your
hands-free speaker (when your hands-free speaker and phone
have previously been connected, and your phone supports
this feature).
INDICATOR LIGHTS
With the Charger Plugged In
Indicator Light Status
Note: Charging status not displayed when hands-free
speaker is in use.
Steady red Charging
Steady blue Charging complete
With No Charger Plugged In
Indicator Light Status
Off Power off
Steady purple Powering up
Steady blue Pairing mode
Quick red flash Battery low
Blue with quick Pairing successful
purple flashes
Slow blue pulse Connected (on a call)
Blue flash Standby (not on call)
Quick blue flash Incoming call
Slow purple pulse Muted
AUDIO TONES
The audio tones provide information about your
hands-free speaker status.
Audio Tone Status
Single high tone when Volume at minimum
pressing Volume button or maximum
Five rapid high tones Low battery
repeated every 60 sec.
No audio indications; Out of range
deteriorating quality
Ring tone Incoming call
Single high tone Pairing confirmation
Single low tone Voice activation
Dual high/low tone Voice tag not
(phone dependent) recognized
Single high tone End call
Low to high tone Phone network
not available
Two ascending tones Mute enabled
Two descending tones Mute disabled
Loading...