Motorola T2282 user Manual

Download

Options Menu

Quick Access

‡

English

Quick Reference

Special Keys

S O C E $

'` f

Making a Call

Enter

Receiving a Call

Press O.

Ending a Call

Press O or C.

Making an Emergency Call

Enter to a central emergency operator.

Press to turn phone on and off. Press to accept call, setting, option,... Press to reject call, setting, option,... Press to enter the Quick Access features. Press to access the options or phone

book menus. Press both simultaneously to lock the

keypad; also use to scroll left and right. Press to scroll up and down. Press to call Voicemail.

911O

. The call will be directed

Quick Access Features

Press E, scroll to the feature and press O to select.

Redialing the Last Number Called

Press O to display the last number dialled.

Press O to call the number.

One-Touch Dialing

Press and hold the appropriate digit key 1 to

Storing Numbers in the Phone Book

Press E, scroll to select.

Dialing Phone Book Numbers

Enter

Stopping a Call Alert

Press the volume button when the phone is ringing. This will stop the alert but not answer the call.

Add to SIM

and press O to

Quick Reference

English

Welcome

Congratulations on your purchase of a mobile phone from features that put you in control and give you unrivaled power, while remaining discreet.

Motorola

, the world leader in cellular technology. The phones are packed with

Introduction

Control

• Customizable Quick Access Menu E -

most frequently used features in your own personal menu so that they can be accessed with just two key presses. Icons make each feature easy to identify.

Place nine of your

Power

• Superb battery performance G -

several hours conversation or several days standby, but is still small and light.

Before you use your phone, please see the ‘Your Battery’ section for important information on charging a new battery.

Each phone is capable of

Enjoyment and Entertainment*

• WAP -

* Network & Subscription dependent feature. Not available in all areas.

Easy keypad Internet access and fast delivery of

information.

Personality™

This cellular telephone incorporates

Motorola

communications by guiding you through the features and presenting you with simple choices every step of the way.

Personality

phone - for example, different ringer tones, a phone book and network selection preferences - all presented with clarity and simplicity. In this manual, each of the identiﬁed with an meet your requirements.

Personality

™ also allows you to personalize the way you use your

™ removes the complexity of cellular

symbol to indicate that it is customizable to

Personality

™. Unique to

™ features is

Introduction

Understanding this Manual

Many of your phone options are accessed by a simple menu system. A full description of the menus and how to move around them is covered in the next section describes the use of each menu item, it will be assumed that you are familiar with the menu system.

Menu Navigation

. When the manual

Key Presses

Key presses are represented in this manual using symbols so that you may locate and use the required sequence quickly . A sequence of key presses may be shown as follows:

$OC

This means that you should press the $ key followed by the O

key and then the

key, in sequence, not simultaneously.

Entering Information

When you are requested to enter information, such as the number of

bold

the phone you wish to call, this is represented in example:

C A B G

- enter the required telephone number.

- enter your Personal Identiﬁcation Number.

- enter your unlock code.

- enter the Phone Book location number.

type. For

Prompts and Messages

Your phone responds to key presses by displaying either easy to understand prompts that guide you to the next action, or simple messages conﬁrming that your action is complete. Prompts and messages are represented in this manual in LCD style, for example:

Enter PIN

Completed

Other Symbols

You will ﬁnd the following symbols used throughout this manual:

A Note contains additional information which is relevant to

the feature/item.

A Caution contains important additional information which is relevant to the efﬁcient and/or safe usage of your phone.

This symbol indicates that the feature is a feature that can be customized to meet your requirements.

This symbol indicates a short key sequence for the feature.

Personality

™

English

Introduction

Menu Navigation

A large number of your phone's options are accessed by using menus which use a common approach for selection, change and cancellation.

Please read this section carefully before attempting to access a menu option. When you understand the common approach to menu navigation and how the menus are shown on the page, you will be able to access and change options with ease.

Entering the Menus

Two different keys are used to access the menus:

enters the Options menu while in standby mode; enters the In-call menu during a call.

Once entered, the menus use the ', `, <, >, O and

keys in a common manner to access, select and change

individual options.

enters the Quick Access menu.

Leaving the Menus

To leave any of the menus, you can either press and hold the C

key or repeatedly press the return your phone to the standby mode.

Alternatively, a quicker way to leave the menus is to press

key. Both of these actions will

Menus and Sub-menus

A menu is a simple list of options. Some of these options provide access to a further list of options called a sub-menu. When navigating through the menus you may ﬁnd it is helpful to think in terms of menu levels - the ‘parent’ menu being on one level and its sub-menus being on a lower level.

Moving To and Selecting a Menu Option

To move from one option to another on the same level, use the scroll

keys: the backwards. When you ﬁnd the option you want, press the to select it.

Depending on the option you select, one of three things will happen:

either a brief message will be displayed conﬁrming an action,

•

for example

• or a prompt will be displayed requesting you to enter

information, for example

• or the ﬁrst option of a sub-menu will be displayed. You can

key scrolls forwards and the ' key scrolls

O key

Completed.

Enter PIN or Enter Name.

select this option using the O key or browse through the other options using the scroll keys.

To leave an option or sub-menu, press the C key. This will take you back to the parent menu item.

Menu Options with Security Codes

Some options are protected from misuse by requiring you to enter one of the security codes. To use these options, you must enter the requested code before proceeding.

Introduction

English

Menu Navigation - A Working Example

The following steps will take you through how to switch the Extended Menus option on:

1 When the phone is in the standby mode, press the $ key.

This will access the Options menu and will be displayed.

2 Press the ` key repeatedly until the Phone Setup sub-

menu item is shown in the display.

3 Press the O key to select the sub-menu. 4 Press the ` key repeatedly until the

sub-menu item is shown in the display.

5 Press the O key to select this item. You can now select

between

On or Off, the current setting will be shown with a

z character. If the z character is next to then O to switch on the Extended Menus. If the z character is next to

On, press C to leave the setting as it is.

Access Internet*

Extended Menus

Off, press ` and

English

# If your service provider has added their own menu, Access

Internet will not be the first item in the Options menu.

† Availability depends on the type and settings of the SIM card,

and/or your subscription to these features.

* Network & Subscription dependent feature. Not available in

all areas.

Introduction

j Short, Extended and Personalized Menus

With Personality™ you can personalize the menus by choosing which features you want readily available. The features that are less frequently used can be stored out of sight.

The menu diagrams in this manual show the condition of the menu settings when you ﬁrst receive your phone. Some features are in the Short Menu and are shown in bold type. Other features are in the Extended Menu and appear in italics.

You can change which features appear in the Short and Extended Menus, and therefore personalize the menus, to suit your requirements.

If you want to move a feature from the Short Menu to the Extended Menu (or from the Extended Menu to the Short Menu), go to the feature and then hold down the offering the following choices:

Add the current feature to the Short Menu/Extended Menu.

•

• Leave the current feature in the Short/Extended Menu. Select the option you want by pressing the O key. The settings for some menu features cannot be changed.

O key until a prompt appears

Introduction

English

Total Customer Satisfaction

At Motorola, Total Customer Satisfaction is a top priority . If you have a question, a suggestion or a concern about your Motorola Cellular Phone, Motorola wants to hear from you.

Motorola Personal Communications Sector 600 North US Highway 45 Libertyville, Illinois 60048

1-800-331-6456 (in the United States) 1-888-390-6546 (TTY access for U.S. only) 1-800-461-4575 (in Canada)

English

http://commer

ce.motorola.com/consumer

Introduction

Safety

Important information for the efﬁcient and safe operation of your phone............................................................................. 11

About Your Phone, Battery and SIM Card

Introduces your phone, explains how to charge and maintain batteries, explains about your SIM Card..............................15

Making and Receiving Phone Calls

Explains how to make single or conference calls, how to redial, how to transfer a call, and how to end a call...................23

Using The Options Menu

Provides an explanation of the Options Menu and how to use it............................................................................................. 33

Using the Quick Access Menu

Provides an explanation of the Quick Access Menu and how to use it..................................................................................... 69

Accessories

Details the accessories available for use with your phone......................................................................................................... 73

What To Do If...

Helps you to solve any problems that may occur........................................................................................................................ 75

Index

A comprehensive Index ................................................................................................................................................................. 85

The Manufacturer reserves the right to make changes in technical and product speciﬁcations without prior notice.

Contents

English

Contents

English

Safety

Wireless Phone Safety Tips

“Safety is your most important call!”

Your Motorola wireless telephone gives you the powerful ability to communicate by voice - almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies the beneﬁts of wireless phones, one that every user must uphold.

When driving a car, driving is your ﬁrst responsibility. If you ﬁnd it necessary to use your wireless phone while behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.

2. When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many Motorola Original hands-free accessories available today.

3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.

4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy trafﬁc or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy trafﬁc can be hazardous.

5. If you receive an incoming call at an inconvenient time do not take notes or look up phone numbers while driving. Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility—driving safely.

6. Dial sensibly and assess the trafﬁc; if possible, place calls when you are not moving or before pulling into trafﬁc. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.

7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations which have the potential to divert your attention away from the road.

8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of ﬁre, trafﬁc accident or medical

emergencies.

9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger , call 9-1-1 or other local emergency number, as you

would want others to do for you.

10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken trafﬁc signal, a minor trafﬁc accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency

wireless number.

Check the laws and regulations on the use of wireless telephones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas.

For more information, please call 1-888-901-SAFE or visit the CTIA website at www.wow-com.com ™ .

1. Wherever wireless phone service is available.

Safety

English

Hand-Held Portable PCS Telephone

IMPORTANT

Read this information before using your

hand-held wireless phone

Exposure To Radio Frequency Signals

Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.

In August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:

• American National Standards Institute (ANSI) IEEE. C95. 1-1992

• National Council on Radiation Protection and Measurement (NCRP).

Report 86

• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996

• Ministry of Health (Canada), Safety Code 6

Those standards were based on comprehensive and periodic evaluations of relevant scientiﬁc literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standar d (C95.1).

The design of your phone complies with the FCC guidelines (and those standards). For additional information concerning exposure to radio frequency signals, see the statement by the FDA at the end of this user guide.

To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Motorola-supplied or approved carrying case, holster, or other body-worn accessory. If you do not use a body-worn

accessory, ensure the antenna is at least one inch (2.5 centimeters) from your body when transmitting. Use of non-Motorola accessories may violate FCC RF exposure guidelines.

Antenna Care

Use only the supplied or an approved replacement antenna. Unauthorized antennas, modiﬁcations or attachments could damage the phone, and may violate FCC regulations.

Phone Operation

NORMAL OPERATION Hold the phone as you would any other telephone, with the antenna pointed

up and over your shoulder. TIPS ON EFFICIENT OPERATION Observe the following guidelines to operate your phone most efﬁciently.

• Extend your antenna fully, if applicable.

• Do not touch the antenna unnecessarily when the phone is in use. Contact

with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

Batteries

Caution: All batteries can cause property damage, injury, or burns if a conductive material, such as jewelry, keys or beaded chains, touches exposed terminals. The material may complete an electrical circuit and become quite hot. To protect against such unwanted current drain, exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container with metal objects. When the battery is detached from the phone, your batteries are packed with a protective battery cover; please use this cover for storing your batteries when not in use.

English

Safety

Driving

Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Observe the following guidelines when using your phone while driving.

• Give full attention to driving--driving safely is your ﬁrst responsibility.

• Use hands-free operation, if available.

• Pull off the road and park before making or answering a call if driving

conditions so require.

Electronic Devices

Most modern electronic equipment is shielded from RF signals. However, certain equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers The Health Industry Manufacturers Association recommends that a minimum

separation of six inches (6”) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

Persons with pacemakers:

• should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;

• should not carry the phone in a breast pocket;

• should use the ear opposite the pacemaker to minimize the potential for

interference;

• should turn the phone OFF immediately if you have any reason to suspect that interference is taking place.

Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the

event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.

Other Medical Devices If you use any other personal medical device, consult the manufacturer of your

device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

ehicles

V RF signals may affect improperly installed or inadequately shielded electronic

systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted notices so require.

Aircraft

Switch OFF your phone before boarding an aircraft. Airline regulations prohibit using your phone while in the air. Check and

comply with the policy of your airline regarding the use of your phone while the aircraft is on the ground.

Blasting Areas

To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.

Safety

English

Potentially Explosive Atmospheres

Turn your phone OFF, do not remove your battery when you are in any area with a potentially explosive atmosphere, and obey all signs and instructions. Sparks from your battery in such areas could cause an explosion or ﬁre resulting in bodily injury or even death.

Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; areas where fuel odors are present (for example, if a gas/propane leak occurs in a car or home); areas where the air contains chemicals or particles, such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.

For Vehicles Equipped with an Air Bag

An air bag inﬂates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inﬂates, serious injury could result.

English

Safety

English

About Your Phone, Battery and SIM Card

Special Keys

S Turns the phone on and off. O Accept call, setting, option. C Reject call, setting, option. E Enter the Quick Access menu. $ Press to access the Options and Phone Book menus. <> Press both simultaneously to lock the keypad; also

use to scroll left and right.

'` Press to scroll up and down. f Press to call Voicemail. AThe shape of the keys that appear in the manual may vary

slightly from those on the phone.

Volume Buttons

The Volume buttons (+-) are on the left-hand side of your phone. The buttons are used for adjusting the keypad, earpiece and ringer volume. A volume meter will display the current volume setting. The meter will disappear after a short time, or if you press O or C.

• To adjust the keypad and earpiece volume, press the buttons with no other features selected.

• To adjust the ringer volume, ﬁrst select the ‘Adjust Ring Volume’ option in the Phone Setup Menu and then use the buttons to set the required volume.

AIf you receive a call and you do not want to answer it

immediately, you can press the volume buttons to stop the phone from ringing. This will not answer the call.

About Your Phone, Battery and SIM Card

The Display

The display on your phone can show alphanumeric characters as well as useful information symbols. The various elements of the display are as follows:

ABC123

B...K z

Characters are used to display messages and telephone numbers.

Signal Strength. The more segments displayed in the bar graph, the better the signal strength.

In Use. Displayed when a call is in progress.

Home Zone. Availability depends on your service

provider. Roam. Displayed when you are registered on a

system other than your home system. Ringer On. Displayed when the call ringer is

selected. If you select the No Ring option, this symbol will be displayed with a line through it.

Short Message Service. Displayed when the phone has received a message. The symbol will ﬂash when your message storage area is full.

Voicemail W aiting Indicator . Displayed when you have a voice message waiting. The availability of this feature depends on your service provider.

Battery Charge Indicator. The more segments displayed, the greater the battery charge.

Icons are displayed when you are in the Quick Access menu.

Indicates that a menu item is currently selected.

In addition, when you are expected to press the O key, a prompt will appear in the display, for example

Completed.

Low Temperature Use

The liquid crystal display used in your phone will behave differently at extremely low temperatures. You may notice that the display responds slowly to key presses; this is to be expected and does not affect the phone operation in any way.

Earpiece Connector

AThe earpiece connector is supplied with a protective plug.

Please remove the plug before inserting the headset.

The earpiece connector is on the left-hand side of your phone, above the volume buttons. Use this connector for the headset accessories available from your Motorola dealer.

Looking After Your Phone

• Never leave your phone or battery in extreme temperatures (over 140˚F), for example behind glass in very hot, direct sunlight.

• To clean your phone, use a moistened or antistatic cloth. Do not use a dry or electrostatically charged cloth.

English

About Your Phone, Battery and SIM Card

Your Battery

Installing the Batteries

New batteries are supplied uncharged and ﬁtted within a protective battery carrier. To remove the batteries, press the release catch on the battery carrier and open the cover.

To install the batteries in your phone: 1 Press the release catch of the phone battery cover and slide

the battery cover towards the bottom of the phone.

2 Align the positive and negative (+ and -) connections on the

battery with the positive and negative (+ and -) connections within the phone.

3 Press the battery towards the connections and push it

downwards until it clicks into place.

4 Replace the phone battery cover.

Important Battery Information

! Always treat your batteries with care. See ‘Batteries’, at

the beginning of this manual.

! Never leave your battery in extremely high

temperatures (over 140˚F, (60˚C)), for example behind glass in very hot, direct sunlight.

! Only Motorola Original Accessory batteries can be

charged in the phone. This is to protect you and your phone from the risks of incorrect charging.

Charging a New Battery

New batteries are supplied in a totally uncharged state. To ensure maximum battery performance, a new battery (or

battery that has not been used for several months) should be charged for at least 14 hours before use.

AA new battery will require several full charge/discharge

cycles in order to achieve its optimum performance.

AA new battery, or a battery that has not been used for

several months, may cause a premature fully charged indication. Ignore this indication and let the battery charge for several more hours, remove and re-insert the battery into the charger, and charge for an additional 14 hours.

! Your batteries will not charge if they are not matched

properly to the phone connection markings (+ and -). Please ensure that you have installed the batteries properly before initiating a charge.

About Your Phone, Battery and SIM Card

English

To ensure that you enjoy maximum battery life and use your battery to its fullest capacity:

• The battery should be at or near room temperature when charging.

Battery Performance and Maintenance

• Best battery performance will be achieved when you regularly charge and discharge batteries as instructed in this manual.

• Battery performance is greatly affected by network coverage.

• Set

Battery Saving Mode to On (see ‘Phone Setup

Menu’) and/or (see ‘Network Selection Menu’).

• If left unused, a fully charged battery will discharge itself in approximately one month.

• When not in use, store your battery uncharged in a cool, dark and dry place.

Frequency of Search to Slow or Medium

Removing Your Batteries

! Switch off your phone before removing batteries.

Failure to do so may damage your phone memory.

1 Press the release catch of the phone battery cover and slide

the battery cover towards the bottom of the phone.

2 Remove the batteries.

AThere is a ﬁnger space opening at the bottom left hand side

of the phone that will allow for easier removal of the batteries.

English

About Your Phone, Battery and SIM Card

Charging Your Battery Using the Travel Charger

ADepending on the state of the batteries, a phone call may

not be supported during charging. If the batteries are low or nearly depleted, it is recommended that you allow the batteries to charge before placing or receiving a call.

The travel charger can power the phone and charge a ﬁtted battery. You cannot power the phone without a battery.

! Ensure that the local mains voltage at your location

matches that of your travel charger.

Install the batteries into your phone (see ‘Installing the Batteries’). To charge your battery: 1 Ensure that your batteries are installed properly.

ACharging will not occur if batteries are not installed

properly, or if the charger is not fully inserted.

2 Connect the travel charger to the phone.

3 Insert the travel charger plug into a suitable power outlet.

The phone can be charged in the powered on or powered off positions. When the phone is powered on a beep-tone is heard and the battery icon ﬂashes when charging begins. When the phone is powered off battery icon ﬂashes when charging begins.

AWhen you begin a charge it is recommended that the

phone is fully powered on or powered off before inserting the charger.

Charging Battery is displayed and the

About Your Phone, Battery and SIM Card

English

AThe beep-tone on the phone will not occur if the batteries

are installed improperly. The beep-tone may take two minutes to occur with new or fully drained batteries.

The state of charging is monitored and displayed by your phone. See ‘Battery Meter Indicators’ later in this section for details.

Battery Meter Indicators

The battery meter displays different messages depending on the batteries attached, and whether or not there is an external power source. The battery meter is found in the Call Related Features part of the Options Menu.

Low Battery Warning

When the battery level is low and only a few minutes of talk time remain, a warning signal (two double beeps) will sound, and

Battery

will be displayed.

When the battery is completely discharged, your phone will turn off.

Battery Indicators

Your phone monitors and displays information about your battery. The following message will appear on the display, as the condition occurs:

Low Battery

The battery charge is low. The battery should be recharged.

Low

Charging Battery

Charging Complete

The battery is being charged.

Charging is complete.

AWhen the battery is completely discharged, you must

charge the battery for one minute or longer before you can make or accept a phone call.

AFor optimal charging do not disconnect the charger until

Charging Complete is displayed on the phone.

English

About Your Phone, Battery and SIM Card

Your SIM Card

Your SIM (Subscriber Identity Module) card was supplied by your Cellular Service Provider when you bought your phone. You will not be able to make or receive calls if you do not have a SIM card inserted in your phone.

ASome networks allow you to make emergency calls without

a SIM card inserted.

The SIM card is a ‘Smart Card’ that contains your phone number, service details and memory for storing Phone Book numbers and messages. Y ou can ther efore use your SIM car d in someone else’s GSM phone and you will be charged for the call.

Like a bank or credit card, you should keep your SIM card secure. Do not bend or scratch your card and avoid exposure to static electricity or water.

! Switch off your phone before inserting or removing the

SIM card. Failure to do so may damage the memory on your SIM card.

SIM Card Insertion/Removal

1 Switch off your phone by pressing and holding the S key,

remove the battery cover and the batteries.

2 Slide the SIM cover towards the right and lift up the left side

of the cover.

3 If necessary, remove the SIM card from the recess in the base

of the phone.

About Your Phone, Battery and SIM Card

English

4 Place the SIM card into the recess in the base of the phone so

that the notch is in the top left-hand corner.

5 Replace the SIM cover, then press and slide it to the left to lock

it into place.

6 Replace the batteries and battery cover. If the SIM card is inserted the wrong way around, or damaged,

the

Check Card message may be displayed. Remove the SIM

card, check that it is the right way around and then re-insert it into the phone.

If either of the

Supplier

Bad Card See Supplier or Blocked See

messages are displayed, then you will need to

contact your Cellular Service Provider.

English

About Your Phone, Battery and SIM Card

Making and Receiving Phone Calls

Switching the Phone On and Off

To switch the phone on or off, press and hold the S key . If you switch the phone on and there is no SIM card inserted, you will be asked to insert one. Once inserted, the phone will check that the SIM card is valid.

A number of messages will then be displayed:

•

Enter PIN - a request to enter the SIM card PIN code (if

required).

•

Enter Phone Unlock Code - a request to enter the

phone unlock code (if required).

•

Searching... followed by a network name - as the phone

searches and then ﬁnds a suitable network to connect to.

Entering Your SIM Card PIN Code

To enter the PIN code, enter AO. As you type in each digit of the PIN code a

displayed. If you make a mistake, press and release the C key to remove

the last digit. Holding the C key down will remove the entire entry.

When the PIN code is complete press the O key. If the PIN code entered is incorrect, the warning message

will be displayed, followed by Enter PIN.

* character will be

Wrong

! If the PIN number is entered incorrectly three times in a

row, your phone will automatically lock-up and the

Blocked message will be displayed. See ‘Unblocking

Your Phone’ for details on unblocking your phone.

The PIN code can be changed, see ‘Change SIM PIN Code’ in the Phone Setup Menu section for more details.

j Entering Your Unlock Code

If your phone displays the message Enter Phone Unlock

Code

you must enter your unlocking code by entering

BO. The unlock code is a four digit number which is set by the

manufacturer to 1234. The code can be changed, see ‘Change Unlock Code’ in the Phone Setup Menu section for more details.

If you forget your unlock code, press the $ key. This will display the ‘Change Unlock Code’ option. Enter O D, enter a new unlock code, and press O.

Locking the Keypad

Press the < and > keys simultaneously to prevent accidental usage of the phone. To remove the lock, press < and > simultaneously. All keys with the exception of the S key will be disabled. You can still answer an incoming call by pressing O when the keypad is locked.

Making and Receiving Phone Calls

English

Making a Phone Call

To make a phone call, your phone must be switched on and unlocked.

It will not be possible to make a phone call unless you are in an area where there is a GSM1900 service. When a service has been found, a series of rising bars, x, will show the signal strength.

There are a number of different ways to make a phone call:

• Using the digit keys.

• Using automatic redial.

• Redialing the last number called.

• One-touch dialing a Phone Book entry*.

• Dialing a Phone Book entry*.

• Calling an embedded number in a message.

The easiest method of making a phone call is to enter the number using the digit keys then press O.

AIf you make a mistake, press and release the C key to

remove the last digit. Holding the C key down will remove the entire number.

Y our phone will then attempt to make the phone call. The display will show the call is not answered, pressing O, at this point will end the attempt.

When the phone call is answered, the display will change to

Connected for a few seconds, followed by End Call?.

To end your call press O.

Calling to show the call attempt is being made. If

Automatic Redial

If your call attempt does not succeed, the message Redial? will be displayed for ﬁve seconds. Pressing O at this point will automatically redial the phone number.

When the call is answered, you will hear a short ring tone. The maximum number of redial attempts is set by your Cellular

Service Provider. If the phone call cannot be connected within this maximum, the message

Redialing the Last Number Called

i When in standby mode, press OO.

Alternatively, you can retrieve the last number dialed using the ‘Last Ten Calls’ feature in the Phone Book menu.

Redial Failed will be shown.

j One-Touch Dialing Phone Book Numbers

To quickly retrieve and dial a number stored in the ﬁrst nine locations of your Phone Book1, press and hold the appropriate digit key. For example, pressing and holding 2 will dial the phone number stored in location 2 of your Phone Book.

AYou do not need to press O to call the number.

1. The Phone Book entries that you are able to access will depend on the One-Touch Dial Setting option in the Phone Book menu.

English

Making and Receiving Phone Calls

j Dialing Phone Book Numbers

Alternatively, enter the phone book G number followed by >O.

Calling an Embedded Number in a Message

Details on how to call a number embedded in a message are given in the Messages Menu section.

International Phone Calls

To make an international phone call press and hold the 0 key. After a couple of seconds the international dialing preﬁx appear in the display, this allows you to call from any country without knowing the local international access code.

Now enter the country code, followed by the phone number . The country code follows the conventional format, 49 for Germany, 44 for the UK, 46 for Sweden, etc.

Just like a conventional international call, remove the leading '0' of the area code when you dial.

Inserting Pauses Into Phone Numbers

To obtain a three second 'pause' character in a phone number, press and hold the < key for a couple of seconds, the pause symbol

Ü will appear.

The pause character produces a three second delay whenever it is used. However, the ﬁrst pause character in a phone number is a special case, it will not begin its delay until the call is answered.

Pause - A Working Example.

If, for example, you have a tone-based voicemail system on 555-6911, with a mailbox number 1066 and password 2001. Then you may dial the following number:

5556911Ü1066Ü2001O.

+ will

The ﬁrst part of the number would be used to call the voicemail system.

When the call is answered the ﬁrst pause will produce a delay of three seconds before the tones for

1066 are sent to select the

mailbox. There will be a second pause of three seconds before the tones

for

2001 are sent as the password.

Emergency Calls

When you dial 911, your phone will automatically send an emergency message to your PCS network. Keep in mind that you must be within PCS network coverage area. If allowed by your service provider, the emergency message can be sent with or without a Sim card inserted into the phone and regardless of any seurity code settings.

Please check with your network operator for further information regarding emergency dialing services.

To dial the PCS emergency number press 911 O. When the emergency call is being made and connected, the

display will show emergency.

AYou may also be able to dial 112, the international

emergency number, to place emergency calls.

Making and Receiving Phone Calls

English

Receiving a Phone Call

To receive a phone call:

• Your phone must be switched on and unlocked.

• You must be in an area where there is GSM1900 service.

• Your Call Forwarding and Call Barring settings should not be

set to forward or bar incoming calls.

When your phone receives a call, it will ring and the display will show the the caller’s number or name will be displayed instead).

To answer the call, press O.

Call message (if you have Caller Line Identiﬁcation,

If you do not wish to answer a call you can either:

Press and release the C key. If you have enabled the 'Detailed Forwarding - If Busy' or ‘Forward when unavailable’ options in the Options Menu, the caller will be forwarded to the forwarding number , otherwise the caller will hear the busy tone.

or Press and hold the C key. This will reject the incoming call.

No call forward option will be offered.

If your phone rings and you do not answer it, the message

Unanswered Call will be displayed to show you that a call

attempt was received.

Ending a Phone Call

To end a phone call, press O or C.

English

Making and Receiving Phone Calls

In-Call Menu

The “In-Call” menu provides access to additional functionality during a call.

Entering the In-Call Menu

The “In-Call” menu is accessed by pressing the $ key during a call.

Leaving the In-Call Menu

To leave the “In-Call” menu press the C key.

In-Call Menu Options

The options listed in the “In-Call” menu will dynamically change depending on the current call state. The following list contains all of the possible options in the “In-Call” menu.

AOnly some of the options will appear at any given time. The

order of the options may vary.

Hold Call

This option will put the active call on hold.

Make a New Call

This option allows you to make another call.

Restrict My Number

This option allows you to make a call without the remote user getting advanced warning of the number.

End Active Call

This option terminates the active call, and makes the call that was previously on hold, the active call.

End Held Call

This option will terminate a held call.

Making and Receiving Phone Calls

English

End Current And Held Call

This option will terminate all connected calls.

Switch Calls

This option allows you to switch between the active call and the call that is on hold.

Conference Call

This option connects you with up to ﬁve other telephones on one call (see ‘Making a Conference Call’).

Transfer Call

This option transfers a call to another telephone (see ‘Transfer Call’ later in this section).

Split Call

This option allows you to separate an individual from the main Conference Call.

Reject Waiting Call

This option will reject a waiting call.

Reconnect

This option will make the call on hold the active call.

Reconnect Held Call

This option is similar to call on hold, and a call waiting.

Reconnect but will appear if you have a

Reconnect Held Call will

make the call on hold the active call.

Turn Mute On or Off

Temporarily turns the microphone off during a phone call. Reselect this option to resume your conversation.

j Call Holding and Call Waiting

Your phone supports the GSM options of Call Holding and Call Waiting. Using these options you can place a current phone call on hold and accept an incoming call or start a second call (See ‘Call Waiting’ in the ‘Call Related Features’ menu for details of how to control this feature).

Call Holding and Call Waiting Scenarios

The display will automatically change according to the status of your current call (or calls) and will propose the option that you are most likely to want. Press O to accept this option or press $ and then ` to scroll through the “In-Call” menu for the alternative options. By following this procedure you will ﬁnd that even the triple combination of an active call, a held call, and a call waiting is easy to manage.

The following points summarize the more common situations:

• To put an active call on hold, press $, the display will show

Hold Call Select? - press O to put the call on hold.

To reconnect the call, press O.

• To put an active call on hold and make another call, ﬁrst put the active call on hold, then press $ and select the

New Call

option1.

• To switch between an active call and a held call press O at the

Two Calls Switch? prompt.

1. A quicker method of making another call is to enter the number to be called directly and press O. Your phone will place the current call on hold and attempt to call the number entered.

Make

English

Making and Receiving Phone Calls

• To accept a waiting call during an active call, press O at the

Call Waiting Answer? prompt. The active call will be

placed on hold. If you prefer to end the active call before accepting the waiting call, press $ and select the

Active Call

option.

• To reject a waiting call, press $ and select the

Call Waiting

option (or simply press the C key).

End

Reject

AIf you have an active call, a call on hold and a call waiting,

you cannot accept the waiting call until you end either the active call or the held call, or join the active and held calls.

Call Holding and Call Waiting Messages

During Call Holding and/or Call Waiting operations, your phone may display one or more of the following messages:

Trying

A request to hold the active call, swap the active with a held call, or add a member to a Conference Call, has been made.

or A request to reconnect the held call has been made.

AIf you are in the process of placing a call on hold and

Trying appears in the display, you need to press O to

resume the current call. If you press C when you are trying to place a call on hold, it will end the current call.

Hold Failed

The request to hold a call has been unsuccessful.

Cannot Hold Second Call

A call is already on hold, you cannot place two calls on hold at the same time.

Connection Failed

The held call could not be made active again.

Busy Try Later

Your phone is still working on a previous command. Wait a short time before repeating the command.

Anonymous

The person who is calling you has blocked their number from appearing on your phone.

Unavailable

The network is unable to provide the caller’s number.

Conference Unsuccessful

The request for Conference Call has been unsuccessful.

Transferring Call

A request to transfer a call has been made.

Transfer Unsuccessful

The request to transfer a call has been unsuccessful.

Making and Receiving Phone Calls

English

Making a Conference Call

This option joins the active call with a held call. With Conference Call, you can have a conference with up to ﬁve other telephones. At any time during your call, you can add, disconnect or separate individuals from the Conference Call using other “In-Call” menu options.

AYou must subscribe to both Conference Call and Call

Waiting Supplementary Services to be able to use this feature.

Initiating a Conference Call

To initiate a Conference Call, place the active call on hold, and dial another phone number. You will then have one active call and one call on hold.

Press the $ key to enter the “In-Call” menu and select

Conference Call. The currently active call and the call on

hold will then join into one Conference Call.

Managing a Conference Call

While in a Conference Call, you will have the option to add new calls to the Conference Call or separate one of the members from the Conference Call.

Adding a New Call

There are a number of different ways to add new calls to the Conference Call:

• Using the digit keys.

• Using the Make New Call option from the “In-Call” menu.

• Recalling a Phone Book Entry using Quick Access.

• Answer Call Waiting.

No matter which method is chosen to add a new call, the original Conference Call will be ﬁrst placed on hold while the new call is being connected. You must then enter the “In-Call” menu and select

Conference Call to join the New Call with the original

Conference Call in progress.

Separate One of the Members in the Conference

During a Conference Call, you will also have the option to separate a selected member from the main Conference Call.

AIn order to separate a member from the main Conference

Call, there must not be any calls on hold.

Press $ during a Conference Call and select

Split Call.

You will then be presented with the phone number or name of all members of the Conference Call. Use the scroll keys to ﬁnd the selected member of the Conference Call. Once the desired member is selected, press the O key and select

Split Call.

At this point, the selected call will be separated from the main Conference Call and private conversation between you and the selected member is possible.

To re-join all the parties again, select

Conference Call from

the “In-Call” menu.

English

Making and Receiving Phone Calls

Transfer Call

Transfer Call transfers a call to another telephone. There are two ways to transfer a call; before or after the third party is connected.

AYou must subscribe to both Conference Call and Call

Waiting Supplementary Services to be able to use this feature.

Initiating Transfer Call Before the Third Party is Connected

To transfer a call to another telephone, press the $ key and select

Transfer Call from the “In-Call” menu. Enter the

number where the call will be transferred and press O. Your phone will then attempt to transfer the call. The display will

show

Transferring Call followed by Call

Transferred

you will be disconnected automatically.

Initiating Transfer Call After the Third Party is Connected

If you already have an active call and a call on hold, press the $ key and select Y our phone will then attempt to transfer the active call to the call on hold. The display will show by

Call Transferred. Once the call has been successfully

transferred, you will be disconnected automatically.

. When the call has been successfully transferred,

Transfer Call from the “In-Call” menu.

Transferring Call followed

Making and Receiving Phone Calls

English

Making and Receiving Phone Calls

Using the Options Menu

English

Access Internet

Menu Title

[Icon] Softkey1 Softkey2

3> Option 3

2> Option 2

1> Option 1

AAccess Internet is a network and subscription-dependent

feature. Contact your service provider for details about the mobile internet services based on the WAP (Wireless Application Protocol) technology that they provide.

Y our phone has mobile internet access. This allows you to use the mobile internet services available from your service provider, for example, ﬁnancial, sport, travel and entertainment information services.

This section explains:

• some of the common display features

• how to set up your phone for mobile internet access

• how to start a mobile internet session

• how to use and end the mobile internet session.

English

Using the Options Menu

Common Display Features

Your service provider determines the layout and information that appears on the display. This example display illustrates a typical mobile internet screen and the soft keys you use to select and navigate through options.

Using the Main Menu

To display the Main Menu, press and hold $ until the Main Menu appears. You can access the Main Menu only during a mobile internet session. Then scroll up or down to highlight the appropriate menu option and press O to select it. The Main Menu includes special commands, for example:

Help: provides help, if available, for the previously-

highlighted option.

Home: returns you to your home page provided by your

service provider. Mark site: allows you to add a site to your Bookmarks folder. Setup: contains the options to set up your mobile internet

access.

Using Bookmarks

Mark site from the Main Menu. When your phone

Select prompts you for a A

Stored XXX message conﬁrms that the bookmark key is set.

Bookmark?, press any key from 1 to 9.

T o r eturn to the bookmark during a mobile internet session, press and hold the appropriate key.

Using the Soft Keys

To select a soft key from the display during a mobile internet session, press O or $. The soft keys change so that they are appropriate for the current display, for example, or

View. In the example display, $ selects the softkey1 and

O selects the

softkey2.

Quit, OK, Back

Mobile Internet Icons and Messages

Icon or Message Description

Sending )))))) Sending data to the internet. Receiving (((((( Receiving data from the internet.

Connecting ..... Connecting to the internet.

Working ..... Performing an internet activity.

[struck out key symbol]

Non secure internet connection.

AThe internet service you receive determines the icons and

messages that appear on the display.

Setting Up for Mobile Internet Access*

AY our service provider may set up your mobile internet access

automatically .

To set up your mobile internet access manually, you will need the following information:

• Primary Data Gateway: this is the IP address of the gateway through which you will access the mobile internet. The IP address is in the format 123.456.789.123.

• Phone Number: this is the number that your phone will call to access the internet; your Internet Service Provider (ISP) issues this number.

• User Name: this is your user name, provided by your ISP.

• User Password: this is your password, provided by your ISP.

• Baud Rate: this is likely to be 9600, the standard data rate for

GSM phones.

• Idle Time Out: this is the time the phone will wait before hanging up if it detects no internet activity; usually 600 seconds; maximum 1000 seconds.

• Line type: this is the type of call you make to your ISP, either modem or ISDN.

• Connection Type: this is either Non-Transparent or Transparent, depending on your service provider.

Using the Options Menu

English

Also ensure that your mobile phone number shows when you select the menu option

Phone Book Main Menu. This could be used as your account

My Phone Number(s), under the

number by the Primary Data Gateway. If your number is not shown, add it by following the instructions in My Phone Number(s).

Select the menu option key. Press and hold the $ key until the Scroll down through the options to

Access Internet and press the O

Main Menu appears.

7> Setup and press O

key. Enter the information listed above at the appropriate menu item by ﬁrst selecting the item and choosing the softkey to edit it as necessary.

When you have entered all the appropriate information, exit the Main Menu by pressing the C key repeatedly. Turn your phone off and then on again to make sure you register all changes. You will then be ready to start a mobile internet session.

Starting a Mobile Internet Session

i Press E. Select the Quick Access feature (÷ Access

Internet).

The menu option Access Internet starts a mobile internet session.

When you start a mobile internet session, you will see the messages

Receiving (((( before your home page appears. Typically, an

ISDN connection will take approximately 10 seconds and a modem connection will take 30 seconds.

Connecting ...., Sending )))) and

Using the Mobile Internet Session

Selecting Options Within a Mobile Internet Session

If the Internet page has a list of menu options, scroll up or down to highlight the appropriate menu option and then press O to select it. Press C to return to the previous screen.

When the text for a menu option is too wide for the screen, the phone uses two screens and repeats each half of the menu list until you make a selection.

Editing Text Within a Mobile Internet Session

You edit text in a mobile internet session in a similar way to editing text in all other phone functions, but you can use softkeys to enter symbols and numbers easily. See How to Enter Alphabetic Characters.

Making and Receiving Calls During a Mobile Internet Session

To make a call, you must end the mobile internet session and make your call in the normal way.

You can not receive voice calls during an on-line mobile internet session. When an on-line session is in progress, the phone displays the (In Use) icon. If you r eceive a call during a mobile internet session the phone forwards the call (See Call Forwarding).

If you receive a call during an off-line mobile internet session (the

(In Use) icon is not displayed) your phone prompts you to

Answer?. Press O to accept the call or press C to reject it.

1. Availability of this feature depends on your service provider.

English

Using the Options Menu

If you answer the call, WAP Session Paused - Resume? appears when you end the call. Press O to resume your mobile internet session or press C to return to the idle phone display.

Internet Service Alerts

You do not need to be using the mobile internet to receive an internet service alert. If you receive an alert, your phone:

• emits an alert tone (depending on the ‘Ringer On or Off’ setting)

• displays a pop up screen with appropriate alert details.

Press O to display the contents of the alert or press C to reject it.

Ending a Mobile Internet Session

Press the C key repeatedly until the Internet home page appears. Press C again to end the mobile internet session.

Summary of Keys Within a Mobile Internet Session

Key action Effect in mobile internet

Press $

Press

Press and hold $Displays the mobile

Press

Press repeatedly

Press again

Press

1...9

Press and hold

1...9

Press

'or `

a. For full details, see see ‘How to Enter Alphabetic Characters’.

Selects the ﬁrst soft key (Softkey1 in the example).

Selects the second soft key (Softkey2 in the example).

internet menu. Takes you back to the

previous screen. Takes you back to the

Internet home page. Ends the mobile internet

session. Selects a menu option in a

list T akes you to a bookmarked

page.

Takes you up or down through a list of menu options.

Effect in text editor

Deletes the character in front of the cursor.

Deletes all the characters in the edit area.

Inserts an alphanumeric character.

Changes the case for the next alphanumeric character.

Moves the cursor one position to the left or one position to the right.

Using the Options Menu

English

Accessing MyMotorola.com

The My Motorola option on the mobile internet menu allows you to go directly to the MyMotorola.com web site.

Go to MyMotorola.com today!

MyMotorola.com is a powerful, free tool that allows you to get the most from your phone.

To access the power, simply go to http://www and register. Complete the ‘Join Now’ registration form with some information about yourself and your phone to access support tools, personal information tools and a list of WML web sites that work great on your new Talkabout phone.

You can enjoy the freedom of accessing your personal data from your phone, wherever you are. You can also access MyMotorola.com from any personal computer with an Internet connection, anywhere in the world.

MyMotorola.com gives you the power to take your world with you:

The power to stay informed. View your mobile bookmarks:

the mobile Internet sites of your choice, for business or for pleasure, customized for your phone.

.mymotorola.com

The power to relax. Enjoy exclusive access to games, giveaways and prizes. Explore your personal, mobile entertainment options and have fun with your friends.

Take your world with you. Visit MyMotorola.com today.

English

1. Availability depends on the type and settings of the SIM card, and/or your subscription to these features.Not available in all areas.

Using the Options Menu

The Phone Book Menu

Using the Options Menu

English

Using the Phone Book Menu

You can store names and telephone numbers as entries in the Personal Numbers list and in the Fixed Dial list on your SIM card.

The amount of Personal Numbers entries will vary depending upon the type of SIM card issued by your Cellular Service Provider.

You can also store up to 40 entries in a Fixed Dialing list if you have this feature. Fixed Dialing allows you to limit use of your phone to particular numbers.

Each Phone Book entry comprises:

• A phone number - up to 20 digits*.

• A name - up to 50 characters* but typically 10 or less.

• A location label - from 1 to 255* in your Personal Numbers

list, or 1 to 40* in your Fixed Dial list.

* Dependent on SIM card.

How to Enter Alphabetic Characters

The 0, 1,... ...,8 and 9 keys are used to enter

alphabetic characters, for example when storing names in the Phone Book or when creating messages.

For example, if you press the 5 key, the ﬁrst displayed character will be can press the same key again to show display

L, another... ...will display 5. Your phone will continue to

scroll through the characters available on the selected key with each new key press.

A long press of any of the keys will switch all the characters to lower case, a second long press will switch back to upper case.

T o enter the next character pr ess the appropriate key. If, however , the next character is on the same key as the previous character you will ﬁrst need to press the > key. Pressing the > key a second time will produce a space.

If a mistake has been made, you can go back to the incorrect character by pressing <.

Characters can be removed from the display by pressing the C key.

The character before the cursor ( deleted.

Press the O key to store the information.

J. If this is not the required character, then you

K. Another press will

Ö) is the character which will be

English

Using the Options Menu

Available Characters

Press the appropriate keys to get the following characters:

Space . 1 ? ! , ë Ä & : " ( ) ' ® @ % ¡ $ Space . 1 ? ! , ë Ä & : " ( ) ' ® @ % ¡ $

2 A B C 2 [ ® ± V X È

a b c 2 { ¯ ± U X È

3 D E F 3 ° ¿ ¤ Z

d e f 3 ° ¥ ¤ Z

4 G H I 4 Y §

g h i 4 Y §

5 J K L 5 Á

j k l 5 Á

6 M N O 6 ] \ « ¨ µ

m n o 6 } | ¬ ¨ µ

7 P Q R S 7 Â X ¸

p q r s 7 Â X ¸

8 T U V 8 W ^ ê

t u v 8 W ~ ê

9 W X Y Z 9 º ·

w x y z 9 º ·

0 + - 0 x * / = > < #

+ - 0 x * / = > < #

The top line for each key shows the upper case characters, the lower line shows the lower case.

Find Entry By Name

This option is used to select a telephone number from a list of alphabetically sorted Phone Book names.

Once selected, this option will display the message

Name

. You can enter a maximum of three characters from a

Enter

name but you do not need to enter all three characters to begin a search.

The Phone Book entries will be searched and the ﬁrst alphabetically matching entry will be displayed.

If there isn’t a name matching your entry, the nearest alphabetically matching entry will be displayed.

If you do not enter any name information, the ﬁrst alphabetical entry will be displayed.

If there are no names stored,

No Names Stored will be

displayed. To display adjacent Phone Book entries use the ` key. When

the desired name is displayed press the O key to select it. The phone then enters the options sub-menu for

Name

. See ‘The Options for ‘Find Entry By ...’’.

Find Entry By

Personal Numbers

The Personal Numbers sub-menu is used for creating and managing your list of personal numbers.

Using the Options Menu

English

Find Entry By Location

i G>

This option is used to select a telephone number from a list of numerically sorted Phone Book locations.

Once selected, this option will display the message

Location

location is not valid, a timed message displayed and the phone will return to the

. You can now enter a location number. If the entered

Range 1-XXX will be

Enter Location

Enter

menu item. The Phone Book entries will be searched and an entry will be

displayed. If you enter a location number for which there is no entry,

Location Empty will be displayed and the nearest non-empty

location will be selected instead. If you did not enter a location, the ﬁrst numerical entry will be

displayed. If there are no numbers stored,

No Numbers Stored will be

displayed. To display adjacent Phone Book entries use the ` key. When

the desired name is displayed press the O key to select it. The phone then enters the options sub-menu for

Location

. See ‘The Options for ‘Find Entry By ...’’

Find Entry By

The Options for ‘Find Entry By ...’

Once a Phone Book entry has been selected, it can be called, modiﬁed or deleted.

Call Number

This option is used to call the selected Phone Book telephone number.

Modify Name or Number

This option is used to change the selected Phone Book entry. The entry’s current telephone number and name will be

presented, in turn, for modiﬁcation. You can accept the current settings or modify as required.

Erase Name and Number

This option is used to erase the selected Phone Book entry. Simply press the O key when the phone displays the message

Erase Name And Number. The option will display the timed

message

Erased XXX and then return to the Find Entry

menu item.

Add Entry

i Press E. Select the Quick Access feature (T Add to

SIM?).

This option is used to add (store) entries to the SIM Card.

English

Using the Options Menu

Check Capacity

This option is used to check the number of free entries in the SIM card memory area.

Prevent Access

This option enables you to prevent access to the Personal Numbers list.

To SIM Card Memory, No Memory Restrictions

You can prevent access to all entries in the SIM card memory. To cancel all access restrictions use the No Memory Restrictions option.

When you change the restrictions, you will be requested to enter the Security Code before the change is made.

Show Services

This option displays a list of phone numbers and services provided by your Cellular Service Provider.

AAvailability depends on the type and settings of the SIM

card, and/or your subscription to this feature.

Last Ten Calls

These options allow you to review your most recently used phone numbers. Depending on the option you choose, you can then redial a phone number, store a phone number in your phone book, or erase all of the phone numbers.

After you select an option, use the ` key to scroll through the list of phone numbers. Press the O key to proceed.

Last Calls Made

Select this option to redial the phone number of any one of the last ten calls made.

Using the Options Menu

English

Last Calls Received

i Press E. Select the Quick Access feature (W Received

Calls?).

Select this option to redial the phone number of any one of the last ten calls received. Y ou can stor e any of the phone numbers in your phone book.

AYou will only see numbers in the Last Calls Received list if

you have Caller Line Identiﬁcation.

When you scroll through your last ten calls, each call appears with a call position number, for example: symbol indicates that you answered the call. A

1+, 2-, 3+ ... 10+. A +

- symbol

indicates that you did not answer the call. Press the O key to select a phone number. You can then scroll

through and select one of the following options:

Call Number

Select this option to call the phone number.

Add to SIM Card Memory

Select this option to add the phone number details (including any details you have added) to your SIM card memory. If the name in the received call does not appear in your phone book, the phone prompts you to Enter Name and Enter Location. For further details, see ‘Add Entry’ in this section.

Erase All Numbers

This option erases all the numbers stored in your Last Ten Calls Made and Last Ten Calls Received lists.

AThe Last Ten Calls lists will be erased when a new SIM is

inserted in the phone.

My Phone Number(s)

This option allows you to access your cellular phone numbers so that you can retrieve or modify them when required. For example, if you have difﬁculty remembering your cellular phone number, store it with the name able to retrieve the number as required.

The My Phone Number(s) list is stored on your SIM card. When you select this item, the ﬁrst location will be displayed. Use

the ` key to scroll through the phone numbers stored. To enter or change a number, scroll to the location and press

O. You will be prompted to enter a phone number and then a name. Press O to store the information.

ADepending on your Cellular Service Provider, you may ﬁnd

that one or more of the entries in the My Phone Number(s) list will have been deﬁned. You may not be able to change these predeﬁned entries.

AThis option is also used as your account number for

accessing the mobile internet.

My Phone and then you will be

English

Using the Options Menu

Fixed Dialing

AAvailability of the Fixed Dialing menu depends on the type

of SIM card.

This feature allows you to limit use (typically third-party use) of your phone to a predeﬁned list of telephone numbers or, if you wish, to a list of country codes, area codes, or other preﬁxes of your choosing.

When Fixed Dialing is switched on, the only numbers that can be dialed from your phone are those stored (or whose preﬁx is stored) in the Fixed Dial list. If you attempt to dial any other number (apart from an emergency number), the message

Restricted will be displayed.

To make a call when Fixed Dialing is switched on, either dial the number manually, or select it from the Fixed Dial list and press O.

Up to 40 entries can be stored in the Fixed Dial list. The list is stored on your SIM card.

! This option may be affected by the Call Barring setting.

View Fixed Dial List

This option allows you to scroll through the numbers in the Fixed Dial list. When you ﬁnd the number you want, press O to make the call.

Setup Fixed Dialing

This option allows you to switch Fixed Dialing on or off and to enter or change entries in the Fixed Dial list.

You will be prompted to enter your PIN2 security code when you select this option.

Switches ﬁxed dialing on.

Off

Switches ﬁxed dialing off.

Edit Entry

Modiﬁes or clears an entry in the Fixed Dial list. When you select this option, the ﬁrst non-empty location in the list will be displayed. Scroll to the entry you want to change and press O. You will be prompted to edit the phone number and the name. To erase the entry, press C.

Add Entry

Adds a phone number and name to the Fixed Dial list. When you select this option you will be prompted to enter the phone number, name and a location number. If you do not specify a location number, it will be stored in the next available location.

AWhen setting up your Fixed Dial list, you may want to

reserve the ﬁrst nine locations for phone numbers you wish to One-Touch Dial. See also ‘One-Touch Dial Setting’.

Erase Entry

Erases a phone number and name from the Fixed Dial list. The ﬁrst entry in the Fixed Dial list will be displayed. Scroll to the entry you wish to delete and press O.

Using the Options Menu

English

One-Touch Dial Setting

This option allows you to specify which Phone Book list can be One-Touch Dialed.

To SIM Card Memory

Switches One-Touch Dialing to your Personal Numbers list stored on your SIM card (locations 101 to 109).

To Fixed Dial list

AThis option is only available if you have Fixed Dialing.

Switches One-Touch Dialing to your Fixed Dial list (locations 1 to 9).

English

Using the Options Menu

Call Related Features Menu

Show Battery Meter

This option displays the approximate amount of battery capacity remaining, for example:

Number of

Segments

1 less than 5% (recharging needed) 3 less than 20% 5 less than 60% 7 greater than 60%

Approximate Charge Level

Using the Options Menu

English

Restrict My Phone Number

'Restrict My Phone Number' is a network feature. You will need to subscribe to one of the two Caller Line Identiﬁcation restriction features with your Cellular Service Provider.

Show ID on Next Call

Your phone number is sent with the next attempted call, after this your phone number will not be sent until you re-select this option.

Restrict ID on Next Call

Y our phone number will not be sent with the next attempted call, after this your phone number will be sent with calls until you reselect this option.

j Call Forwarding

Call forwarding is a network feature. If your phone is unavailable, or you do not wish to receive calls, incoming calls can be forwarded to other phone numbers.

This option can be used to:

• Forward all incoming Voice calls unconditionally.

• Forward incoming Voice calls whenever your phone is

unavailable, busy, not reachable or not answered.

• Reset all forward options to off.

AYou cannot change the call forward settings when you are

out of network coverage.

After selecting any of the call forward options there will be a short delay while the phone asks the network for the current setting.

English

Using the Options Menu

Forward Voice Calls

This option will allow you to set your phone to Forward When Unavailable, Forward All Voice Calls or Detailed Forwarding.

Forward When Unavailable

This option will enable you to forward all incoming Voice calls to a single number, whenever your phone is unavailable.

The option has two settings, If you change the setting to

On or Off.

On, you will be asked to enter a

forward phone number using the digit keys.

ASetting “Forward When Unavailable” to On will have the

same effect as setting all “Detailed Forwarding” options to On.

AWhen

On, Forward When Unavailable takes priority over

detailed forward settings.

Forward All Voice Calls

This option will enable you to unconditionally forward all incoming Voice calls to a single number.

The option has two settings, On or Off. If you change the setting to

On, you will be asked to enter a

forward phone number using the digit keys.

AWhen

On, Forward All Voice Calls takes priority over all

other Voice call forward settings.

Detailed Forwarding

These options will enable you to forward Voice calls to different numbers, depending upon the current status of your phone.

Each of the following detailed forwarding options operate in the same way.

Each option has two settings, On or Off. If you change the setting to

On, you will be asked to enter a

forward phone number using the digit keys.

ADetailed forward settings are ignored while Forward All

Voice Calls or Forward When Unavailable are

If Busy

On.

This option will forward incoming calls if your phone is busy.

If Not Reachable

This option will forward incoming calls if your phone cannot be contacted by the network.

If No Answer

This option will forward incoming calls if you do not answer the call.

Using the Options Menu

English

j Call Waiting

The Call Waiting menu item has two settings On or Off. If you select

Off, you will be not be notiﬁed of waiting calls. The

person trying to contact you will either receive the busy tone, or be forwarded by the ‘

Detailed Forwarding - If Busy’

option. If Call Waiting is

audible alert and by the message

On, you will be notiﬁed of a waiting call by an

Call Waiting - Answer?.

You can press the O key to accept the waiting call, or use the $ and then the ` key to scroll to an alternative option and then press O.

AIf you have Caller Line Identiﬁcation, the caller’s number or

name is displayed instead of the Call Waiting message.

AAvailability of this feature depends on your service provider.

j Call Barring

Call barring is a network feature which can be used to selectively bar outgoing and incoming calls.

If you change the barring setting, you may be asked to enter your barring password. There will be a short delay while the phone notiﬁes the network of the new setting. When the change has been made by the network, the phone will display a conﬁrmation message.

The initial password will be supplied to you by your Cellular Service Provider when you subscribe to this service.

AThis option may be affected by the Fixed Dialing setting.

Bar Outgoing Calls

After selecting this option, there will be a short delay while the phone asks the network for the current setting.

Int'l Calls

When selected, this option will bar outgoing international calls.

Int'l Calls Except Home

When selected, this option will bar outgoing international calls, except those to your home country.

All Calls

When selected, this option will bar all outgoing calls, except emergency calls.

Off

When selected, this option will disable all call barring for outgoing calls.

Bar Incoming Calls

After selecting this option, there will be a short delay while the phone asks the network for the current setting.

When Roaming

When selected, this option will bar incoming calls when you are roaming.

You may wish to select this option, as some Cellular Service Providers charge an additional fee for receiving calls when you are roaming.

All Calls

When selected, this option will bar all incoming calls.

English

Using the Options Menu

Off

When selected, this option will disable all call barring for incoming calls.

Cancel All Barring

This option can be used to set all Call Barring options to

Change Bar Password

This option can be used to change the call barring password. After selecting this option, you will be asked to enter the current

password. You will then be asked to enter, and then re-enter, your new,

4 digit, barring password. When the change has been made by the network, the phone will display a conﬁrmation message.

Off.

Using the Options Menu

English

Messages Menu

Your phone supports the two GSM message features: Short Message Services (SMS) and Cell Broadcast.

SMS Messages

These are text messages that are sent speciﬁcally to and from your phone number.

When an SMS message is received, your phone:

1 Makes three short alert tones. 2 Displays the o (messages) icon. 3 Stores the message for later viewing, if there is space. If there

is not enough space, the o icon will ﬂash. One or more messages must be removed before the message can be stored.

Your Cellular Service Provider will transmit a message for a limited amount of time. If a memory location is not made available before the message is removed from the network, then you will not be able to receive or read it.

Message will then be displayed with the prompt; Read Now?

5 If O is pressed, the phone will enter the Received Messages

browser and immediately display the new message.

6 If C is pressed the phone will return to the screen which

was displayed prior to receipt of the message.

7 If any other key is pressed it will perform the function linked

with that key.

8 If no key is pressed the display will time-out after 1 minute

and return to the screen which was displayed prior to receipt of the message.

English

Using the Options Menu

Cell Broadcast Messages

These are general messages that your service provider broadcasts to all phones in a geographic area. Your phone can only receive a cell broadcast message when it is in idle mode.

The messages are broadcast in numbered 'channels'. For example, channel 050 might be for local weather, trafﬁc reports or stock market prices. Please contact your service provider for a list of available channels and the information they provide.

While a broadcast message is scrolling across the display, you can stop and start it by pressing <. Press > to restart the message from the beginning. If you want to remove the message from the display, press C.

AIf you need to use the < and > keys for their normal

functions while you are receiving a cell broadcast message, you must ﬁrst remove the message.

When the message has scrolled across the display, the beginning of the message remains until one of the following occurs: you remove it; a new message arrives; or you leave the geographic area. For set up details, see Cell Broadcast.

How to Read SMS Messages

You can use the scroll key ('or ` ) to scroll through messages in either the Received Messages or Outgoing Messages lists.

To display a speciﬁc message, enter the message number, for example press 5 to display the 5th message. If the message does not exist,

Invalid Msg Number will be displayed.

Alternatively, to display the next message, press O and select

Go To Next Message.

How to Create and Edit SMS Messages

Use the Message Editor to create or modify text messages. When you enter the editor, the last message that was edited will be displayed. Press and hold C to clear the message and start a new one, or modify the message displayed. For an explanation of how to enter text, see ‘How to Enter Alphabetic Characters’.

Press O once you have completed your message. You will then be presented with the following options:

Send Message - If you select this option you will be

prompted for a phone number, enter the number and then press O to send the message.

Store Message - Select this option to store your edited

message in your Outgoing Messages list.

AIf you don’t store the message after it has been edited, you

will lose all your changes as soon as you select another message to be edited.

Using the Options Menu

English

j Received Messages

i Press E. Select the Quick Access feature (K Read

Messages?).

This option is used to view and manage any SMS messages that have been sent to your phone number.

When selected, this option will display a message indicating the total number of messages and how many of these are new. If there are no messages

If there are messages, the new messages will be displayed ﬁrst, followed by the old. Repeated presses of the ` key will display the whole message, when it was sent and the phone number who sent it (if available).

Once you have read a new message it will automatically become old.

See ‘How to Read SMS Messages’ for more information on navigating through the messages.

Press the O key, when viewing any message, to enter the sub-menu.

Delete Message

This option will delete the currently viewed message.

Reply to Message

This option allows you to reply with a message.

No Messages will be displayed.

Return Call

This option can be used to call the person who sent you the message, if their number has been included by the network, or a number that has been included in quotes “” in the message.

Edit Message

This option allows you to use the Message Editor to edit the selected message and then to either send the modiﬁed message and/or store it in your Outgoing Messages list. See ‘How to Create and Edit SMS Messages’ for more information on using the Message Editor.

Go to Next Message

This option will display the next received message. If you are currently reading the last message in your list then this

option will take you back to the top of the list.

Delete All Messages

This option allows you to delete all received messages whether they have been read or not.

AOnce deleted, messages are NOT retrievable.

English

Using the Options Menu

Outgoing Messages

This option is used to view and manage any outgoing messages. These messages will be stored on your SIM card. When you select this option, the total number of messages will be displayed followed by the ﬁrst message in the list.

AYou cannot send an outgoing message until the Message

Service Center number has been set. See ‘Message Settings’.

Press the O key, when viewing any message, to enter the sub-menu. See ‘How to Read SMS Messages’ for more information on navigating through the messages.

Send Message

This option allows you to add the destination phone number using a sub-menu. Using the scroll keys you can select:

Enter Number - this allows you to manually enter the phone number using the keypad and send the message.

Find Entry by Name - this allows you to recall a phone number from the Phone Book by name and send the message (see ‘Find Entry by Name’ in the ‘Phone Book’ section).

Find Entry by Location - this allows you to recall a phone number from the Phone Book by location and send the message (see ‘Find Entry by Location’ in the ‘Phone Book’ section).

Edit Message

This option allows you to use the Message Editor to edit the selected message and then to either send the modiﬁed message or store it in your Outgoing Messages list. See ‘How to Create and Edit SMS Messages’ for more information on using the Message Editor.

Delete Message

This option will delete the currently viewed message.

Go to Next Message

This option will display the next outgoing message.

Message Editor

i Press E. Select the Quick Access feature (a Message

Editor?).

The Message Editor is used to edit the currently selected message and then to either send the modiﬁed message or store it in your Outgoing Messages list. See ‘How to Create and Edit SMS Messages’ for more information on using the Message Editor.

Using the Options Menu

English

Cell Broadcast

This option determines the cell broadcast settings. See also Cell Broadcast Messages.

On to receive cell broadcast messages. You must then use

Select

Channel List to specify the appropriate channels.

Off

When you select messages and you automatically delete all existing cell broadcast messages.

Channel List

Select either

Channel Index

This option allows you to select up to ﬁve different channels for receiving cell broadcast messages. If you modify a channel, you also remove any message associated with it.

Use ' or ` to highlight the channel index you require (1-5) and then press O. The phone prompts you to

Channel

Type in the channel number and press O. The phone stores the channel details and returns you to the channel index list.

Please contact your service provider for a list of available channels and the information they provide.

Delete All Channels

This option deletes all the channels and all the existing messages.

Off, you do not receive any cell broadcast

Channel Index or Delete All Channels.

Enter

Message Settings

Voicemail Number

This option is used to enter a phone number which will be used by the ‘Call Voicemail’ option.

If there is already a Voicemail Number, this will be shown in the display. This can be used, modiﬁed or deleted as desired.

Service Center

Before you can send any messages you must use this option to enter your Message Service Center number. This number is obtained from your Cellular Service Provider.

If there is already a Message Service Center number, this will be shown in the display. This can be used, modiﬁed or deleted as desired.

English

Using the Options Menu

Expiry Period

You can use this option to specify the maximum time, in hours, that your unforwarded messages are to remain with the Message Service Center before being deleted. When you select this option, the current expiry period will be displayed (the default is 24 hours).

The maximum value you can enter is 10584, though the real limit will depend on your Message Service Center.

Outgoing Message Type

This option is network dependent and can be used to specify the format of your outgoing messages. You can select from the following message types:

Mail

or Voice.

AYou do not need to select

Text (default), Fax, Paging, E-

Voice to send messages to

Voicemail boxes.

Using the Options Menu

English

Phone Setup Menu

Phone Setup (Extended Menus-On)

English

Using the Options Menu

Select Phone Line

Extended Menus

Language Selection

Battery Saving Mode

Select Keypad Tones

Phone Status

†

On Off

English

. . .

Automatic

On Off

Normal Tones Single Tone No Tones

Status Review Master Reset Master Clear

Select Phone Line

This option allows you to switch between Line 1 and Line 2.

AAvailability depends on the type and settings of the SIM

card, and/or your subscription to this feature.

Adjust Ring Volume

This option is used to set the incoming call ring tone volume. The volume will be displayed as follows:

Adjust the volume by pressing the volume buttons on the side of your phone.

Ringer On or Off

Sets incoming call alert to either a ringer tone or a display message.

j Set Ringer Tone

This option sets the tone your phone will make when an incoming call is received on Line 1.

Standard Tone

Your phone makes a standard ringing tone.

Single Ring Tone ... Music Tone

When selected, your phone will produce one of these alternative ringer tones.

AIf you select the Single Ring Tone option, the phone will

only ring once when a call is received.

j Set Ringer Tone 2

This option sets the tone your phone will make when an incoming call is received on Line 2.

AThis option will not appear if you do not subscribe to Line 2.

j Phone Lock

This option is used to set, and change, the unlock code. The unlock code can be set to protect your phone from

unauthorized use. It can be set to automatically lock your phone each time it is switched on.

The unlock code is a four digit number which is set by the manufacturer to 1234. This can be changed at any time by using the 'change unlock code' option.

Using the Options Menu

English

Automatic Lock

This option can be used to automatically lock your phone each time it is switched on. The option has two settings,

On or Off.

Lock Now

This option can be used to immediately lock your phone. Once selected, your phone will be unusable until the unlock code is entered.

Change Unlock Code

This option is used to change the unlock code. After selecting this option, you will be asked to enter the current

security code before you can proceed. You can now enter a four digit code to replace the old code.

ABy pressing the $ key, you can access this option even

when the phone is locked.

Adjust Contrast

This option is used to adjust the screen contrast. The contrast is displayed as follows:

Adjust the contrast by pressing < or > on the keypad. Pressing O or C on the keypad will end the contrast

adjustment.

Require SIM Card PIN

This option is used to set, and change, the PIN code. The PIN code can be set to protect your SIM card from

unauthorized use. If set to restricted each time it is inserted or the phone is turned on.

The option has two settings,

AIf the SIM card does not support PIN code disabling, these

items will not appear.

Change SIM PIN Code

This option is used to change the SIM card PIN code. The 'Require SIM Card PIN' option must be set to

must enter the old PIN code before you can proceed. You will be asked to enter a new, four to eight digit code to

replace the old PIN code. The new PIN code must be entered again as conﬁrmation.

! If the PIN number is entered incorrectly three times in a

row, your SIM card will automatically lock-up and the

Blocked message will be displayed.

On, access to your SIM card will be

On or Off.

On and you

English

Using the Options Menu

Unblocking Your Phone

If you receive the

Blocked message you will need to enter an

unblock code and key sequence before you can use the phone.

AThe 8 digit PIN unblocking code will have been provided

with your SIM card by your Cellular Service Provider.

Enter the following key sequence to unblock your phone:

<<05<EO FOFO

The new PIN code must contain four to eight digits.

! If this operation is performed incorrectly 10 times in a

row, your SIM card will become permanently blocked.

Change SIM PIN2 Code

This option is used to change your PIN2 security code. When you select this option you must enter the old PIN2 security

code before you can proceed. You will be asked to enter a new, four to eight digit code to

replace the old PIN2 security code. The new PIN2 security code must be entered again as conﬁrmation.

! If the PIN2 security code is entered incorrectly three

times in a row, the

When the

Blocked message is displayed, you are not allowed

Blocked message will be displayed.

access to menu items that require you to enter the PIN2 code, for example ‘Setup Fixed Dialing’ and ‘Call Charge Settings’.

If you receive the

Blocked message when you try to enter your

PIN2 code, you will need to unblock and change the code using the following key sequence:

<<052<EO JOJO

AThe 8-digit unblocking code will have been provided with

your SIM card by your Cellular Service Provider.

! If the PIN2 unblocking operation is performed

incorrectly 10 times in a row, your PIN2 code will become permanently blocked.

j New Security Code

The security code is used to control access to security and other options within the menus.

This option is used to change the security code, which is set by the manufacturer to 000000.

Once selected, you will be asked to enter the current security code before you can proceed.

You will then be asked to enter a new, six digit code to replace the old security code.

AIn order to safeguard your phone, you should change your

security code from the factory setting as soon as possible.

Using the Options Menu

English

j Extended Menus

This option is used to switch the extended menus on or off. If the extended menu option is switched off, you will not be able

to access any of the extended features. The option has two settings,

On or Off.

j Language Selection

This option is used to change the language for display messages. The option has multiple settings. When you select a language, all further display prompts and help

messages will be in the selected language.

Battery Saving Mode

This option can help you to conserve battery power by activating DTX (Discontinuous T ransmission), and deactivating the backlight for incoming Cell Broadcast messages.

The option has two settings,

On or Off.

j Select Keypad Tones

This option allows you to change or disable tones you hear when you press a key.

The option has three settings, or

No Tones.

Normal Tones, Single Tone

English

Using the Options Menu

Phone Status

Status Review

This option can be used to view the current setting of menu options.

When selected, your phone will display a list of menu items which have been changed from the default setting. Press the $ key to view the next item.

Master Reset

! This option should be used with caution.

This option is used to restore certain phone options to their original settings.

When selected, you will be asked to enter the security code. Once entered, the master reset option will perform the following operations:

• Cancel Automatic Answer, Audible Call Timers, In-Call Display Meter, Battery Save (DTX), Automatic Lock and Cell Broadcast.

• Return Language Selection to Original.

• Restore Keypad Tones to Normal, Ringer Tones to Standard,

SMS Alert Tones to Standard, Volume Level to Medium and Network Search frequency to Medium.

• Restore Extended Menus to their default settings.

Master Clear

! This option should be used with extreme caution.

This option is used to restore certain phone options to their original settings.

When selected, you will be asked to enter the security code. Once entered, the master clear option will perform the same operations as 'Master Reset', plus the following operations:

• Clear the Last Calls Made and Last Calls received list

• Clear the Message Editor

• Reset the Resettable Call Timers. Master Clear does not clear the:

• Fixed Dial list

• My Number(s) list

• Charge Meters

• Received and Outgoing Messages list

• Voicemail number

• SMS Service Center number

• Lifetime timer.

Using the Options Menu

English

Network Selection Menu

Network Selection

In order for the phone to make and receive phone calls, it must register with one of the available networks.

Your phone automatically searches for the last network used. If, for any reason, this network is unavailable, your phone will attempt to register with a new network.

When your phone needs to register with a new network, it will generate a sorted list of networks.The network list is sorted in the following order:

• The Home network.

• Networks from a preferred list.

• A random list of other networks found above a certain signal

strength.

Any forbidden networks, stored in the SIM card, will not be included in the sorted list.

English

Using the Options Menu

Available Networks

When selected, this option will scan to see which networks are operating in your current location. When the scan is complete, press the ` key to scroll through the list. When you see a network you wish to register with or store in your preferred list, press the O key. You will now enter the 'Register Now' and 'Make Preferred' sub-menu.

Once selected, your phone will try to register with the selected network. If the registration fails, your phone will try to register in the normal way.

Make Preferred

Once selected, you will be asked where the selected network is to be located in the preferred list.

Network Search

These options determine how often your phone tries to register with a network and how the attempt is made.

Registration Preferences

This option determines how the phone tries to register with a network.

The option has two settings, Automatic Search Mode and

Frequency of Search.

Automatic Search Mode

In the automatic mode, the phone will try to register with the ﬁrst network in the sorted list. If this is successful, your phone will display the network name and then enter the standby mode.

If registration is unsuccessful with one network in the list, your phone will try the next listed network. If your phone fails to register with any of the listed networks, it will start at the beginning of the list after a preset period. The preset period is determined by the 'Frequency Of Search' option.

Manual Search Mode

In the manual mode, the phone allows you to search the networks in the sorted list.

Frequency of Search

This option is used to determine how long your phone waits before attempting to re-register after a registration attempt has failed.

The option has the following settings:

, Fast Search or Continuous Search.

Slow Search, Medium

! Fast and Continuous Search may use up a signiﬁcant

amount of battery power.

Using the Options Menu

English

Preferred Networks

Add Network to List

This option enables you to add networks to your preferred list. When selected the

to see which networks are operating in your current location. When the scan is complete, press the < or > key to scroll through the list. When you see a network you wish to store in your preferred list, press the O key. You will be asked where the selected network is to be located in the preferred list.

The

Choose from Known option will, when selected, present

you with a preset list of networks. Press the < or > key to scroll through the list. When you see a network you wish to store in your preferred list, press the O key. You will be asked where the selected network is to be located in the preferred list.

Select the

Add New Network Code option to enter network

codes directly. Once entered, you will be asked where the network is to be located in the preferred list.

Show List of Networks

This option is used to display the networks you have stored in your preferred list. In addition, pressing the O key will select the current displayed entry and enter a move/delete sub-menu.

When

Move to New Location is selected, you will be asked

to enter a new location for the selected network. When selected,

network from the preferred list.

Choose from Available option will scan

Delete Selection will remove the selected

Find New Network

When selected, the phone will try to register with a network in the normal manner, with one exception. When the registration attempt is made, your current network will be excluded from the list of those available. If the attempt fails, your phone will then try to re-register with the previous network.

English

Using the Options Menu

Call Meters Menu

Call Metering

Your phone has an internal metering system which can be used to provide you with individual and total call times or costs.

ACall cost information is only available if you receive the

Advice of Charge service. If you do not receive this service, then only time meters are available.

The meter can be displayed during a phone call and audible tones can be generated to indicate the passage of call time.

Your phone can handle values up to 21 digits long, although during calls it can only display the last 12 digits. If the value exceeds 21 digits, then

In addition, you can set a maximum charge limit so that your phone will monitor either the number of units used or the call cost, and then not allow the limit to be exceeded.

Too Large is displayed.

Show Call Timers

This feature allows you to display the duration of your calls and to reset your time meters to zero.

If you receive the Advice of Charge service then all calls are timed. If you do not receive the Advice of Charge service then, depending on the model, either all calls or only outgoing calls are timed.

Show Last Call

Displays the duration of your last call.

Using the Options Menu

English

Total For All Calls

Displays the duration of all your calls since the time meter was reset to zero using the ‘Reset All Timers’ option.

Reset All Timers

Sets the resettable time meters to zero. The Lifetime Meter is not resettable.

j Set Audible Call Timers

Your phone provides two programmable audible call timers:

• The 'Single Alert Timer' will sound a beep just once during a call, after a preset time has elapsed.

• The 'Repetitive Timer' will sound regular beeps during a call, at preset intervals.

In both cases, the timers will sound their beeps ten seconds before the end of the programmed time.

Set In-Call Display

This feature allows you to specify whether the time or charge meters are displayed during a call. If you do not have the Advice of Charge service, then only the time meter is available.

AIf a total charge limit has been set, then the in-call display

always shows your remaining credit.

Show Time Per Call

This option is used to display the time meter during calls. If you receive the Advice of Charge service, only the chargeable calls will be displayed.

Show Charge Per Call, Show Total Call Charges

AThese menu items are only available if you receive the

Advice of Charge service.

These options are used to display the call charges meter during and after chargeable calls. The meter shows phone units or currency depending on the setting of the ‘Set Charge Type’ option.

No In-Call Display

This option switches off in-call display of the charge/time meter.

Lifetime Timer

This option is used to display the total time of all calls made on your phone.

This meter cannot be reset, the

Reset

or Master Clear options have no effect.

Reset All Timers, Master

English

Using the Options Menu

Using the Quick Access Menu

Although the features in your phone are available through easy access menus, some of the most commonly used features are also available in the Quick Access menu. Each feature in the menu is allocated a number from 1 to 9.

To use a Quick Access feature, press the quick access key (E) followed by the number of the feature, or press [ or ] to scroll through the menu and then press O.

You can change the features, and the positions of the features, available in the Quick Access menu - see ‘Customizing the Quick Access Menu’.

Each Quick Access feature is represented by an icon as well as the feature name. The currently selected icon is shown with a dark background.

B Find Name?

You will be prompted to Enter Name. Enter the ﬁrst three characters of the name and press O. The ﬁrst matching entry in the Phone Book will be displayed. Press O to call the number.

D Find Location?

You will be prompted to Enter Location. Enter the location number and press O. The ﬁrst matching entry in the Phone Book will be displayed. Press O to call the number.

AThe menu shown above represents the default setting

supplied with your phone.

Using the Quick Access Menu

English

T Add to SIM?

You will be prompted to enter a phone number and then a name.

AIf you already had a number displayed, it will automatically

be re-displayed when you select this feature.

The number will be stored in the next available SIM card location. See ‘Add Entry’ for more information.

÷ Access Internet?

AThis is a network and subscription dependent feature.

Contact your service provider for details about the mobile internet services based on the WAP (Wireless Application Protocol) technology that they provide.

Use this option to start your mobile internet session. See Access Internet for more information.

G Battery Meter?

A bar graph indicating the approximate battery charge level will be displayed. The more bars displayed, the greater the charge level.

See ‘Show Battery Meter’ for more information.

H Lock Now?

Immediately locks your phone, you will not be able to use your phone until the unlock code is entered. See ‘Phone Lock’ for more information.

J Mute Phone?

Temporarily turns the microphone off during a phone call. Reselect this option to resume your conversation.

N Adjust Ring?

This option is used to display and to set the incoming call ring tone volume.

g Ringer On/Off?

This option allows you to turn off your phone’s ringer.

K Read Messages?

Y our newest message will be displayed; you can then read, delete and edit messages as normal. See ‘Received Messages’ for more information.

U Outgoing SMS?

Your newest message will be displayed; you can then read, send, delete and edit messages as normal. See ‘Outgoing Messages’ for more information.

a Message Editor?

The last message that was edited will be displayed. Press and hold C to clear the message and start a new one, or modify the message displayed. See ‘How to Create and Edit SMS Messages’ for more information.

W Received Calls?

Displays the ﬁrst entry in the Last Calls Received list. You can scroll through the list and call the numbers as normal. See ‘Last Calls Received’ for more information.

Y Call Timer?

Displays the duration of your last chargeable call. See ‘Show Call Timers’ for more information.

English

Using the Quick Access Menu

£ Show Credit?

Allows you to quickly display the Credit Remaining.

AThis will only show the credit remaining if you receive the

Advice of Charge service.

c Restrict My ID?

Y our phone number will not be sent with the next attempted call; after this your phone number will be sent until you reselect this option.

¤ Find New Network?

Allows you to quickly search for a new network.

Allows you to adjust the screen contrast.

P Forward On/Off?

Unconditional voice call forward will be switched either on or off depending on the current setting.

AYou must have deﬁned a forward number using the

‘Forward All Voice Calls’ option in the Call Forwarding menu in order to use this feature.

AYou cannot switch call forwarding on or off if you are

outside network coverage.

R Call Voicemail?

Your phone will make a call to your voicemail number.

AYou must have deﬁned a Voicemail number in order to use

this feature.

See ‘Call Voicemail’ for more information.

m My Motorola?

Use this option to start your mobile internet session and access the MyMotorola.com information.

web site. See Access Internet for more

1. Availability depends on the type and settings of the SIM card, and/or your subscription to these features.

Using the Quick Access Menu

English

Customizing the Quick Access Menu

You can change the features in the Quick Access menu to suit your personal preferences.

To customize the menu:

1 Press E and scroll to the menu item you wish to change. 2 Press and hold O to access the list of features available. The

currently selected feature will be displayed.

3 Scroll through the list until you ﬁnd the feature you wish to

store in the Quick Access menu; press O.

Completed will be displayed to conﬁrm that the feature has

been stored.

The items in the Quick Access list will appear in the following order:

• Find by Name

• Find by Location

• Add Entry to SIM

• Access Internet

• Battery Meter

• Phone Lock Now

• Phone Mute On or Off

• Ring Volume

• Ringer On or Off

• Read Messages

• Outgoing Messages

• Message Editor

• Last Calls Received

• Last Call Charge

• Last Call Timer

• Credit Remaining

• Restrict My ID

• Find New Network

• Adjust Contrast

• Forward Voice Call

• Call Voicemail

• My Motorola

English

Using the Quick Access Menu

English

Accessories

The following accessories have been designed to work with your phone. Additional accessories may be available and are packaged separately. Please refer to your local service provider or retail outlet for more information.

AThe use of wireless devices and their accessories (“devices”)

may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these devices.

APlease ensure that when using any external connector with

your phone that you are certain that it is fully inserted.

Travel Charger

The Power Adapter (charger) connects the phone to a standard wall outlet. When connected directly to the phone, it charges the battery .

Vehicular Power Adapter

The Vehicular Power Adapter connects to your phone and allows you to charge your phone's battery while driving.

Belt Clip

The Belt Clip holds the phone while being worn on your belt.

AThe belt clip has been designed for your convenience and is

not meant to secure your phone under all circumstances.

Headset

The convenient headset provides both an earphone and microphone in one small accessory for simple handsfree and private telephone conversations. The headset plugs directly into the jack on the top left side of your phone, so that you can wear your phone and move freely.

Personal Handsfree System

The Personal Handsfree System allows you to use your phone handsfree.

Hands-Free Accessories...

The following hands-free wireless phone accessories are available today

• Hands-Free - Zero Installation Kit

• Hands-Free - Integrated Installation

• Hands-Free Headset For information call 1-800-331-6456 or write Motorola

Personal Communications Sector 600 North US Highway 45 Libertyville, Illinois 60048

Accessories

English

Accessories

What to do if...

You can’t switch your phone on Check the battery. Is it charged, pr operly ﬁtted and are the contacts clean and dry? See ‘Important Battery

Information’.

You can’t make calls Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you

are in a building, move closer to a window.

Check that your phone is switched on. Check the Network Selection settings. Try Manual Selection, or try another network. See ‘Network

Search’. Network and subscription dependent feature. Not available in all areas.

Check your Operator coverage map. Is Restricted displayed? Check the Call Barring and Fixed Dialing settings. Has a new SIM card been inserted? Check that no new restrictions have been imposed.

You can’t receive calls Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you

are in a building, move closer to a window.

Check the Call Forward and Call Barring settings. Check the Ringer settings. If it is off, there is no audible alert. See ‘Ringer On or Off’.

Your phone won’t unlock Have you inserted a new SIM card? Enter the new PIN code. See ‘Entering Your SIM Card PIN Code’.

Do you have a replacement phone? Enter the default phone unlock code - 1234. Have you forgotten the unlock code? Press

code).

Your PIN is blocked Enter the PIN unblocking code supplied with your SIM card (see ‘Unblocking Your Phone’). Your PIN2 is blocked Enter the PIN2 unblocking code supplied with your SIM card (see ‘Change SIM PIN2 Code’). Your SIM card won’t work Is the card inserted the right way around? See ‘SIM Card Insertion/Removal’.

Is the gold chip visibly damaged or scratched? Return the card to your Service Provider. Check the SIM contacts. If they are dirty, clean them with an antistatic cloth.

$ to change the unlock code (you will need your security

What to do if...

English

The battery won’t charge Check the alignment of the batteries to ensure that they are installed properly. Make sure that the

positive (+) and negative (-) marks on the batteries match the markings on the phone.

Check the charger . Is it properly connected? Is it fully inserted? Are its contacts clean and dry? The phone should provide a beep-tone and the display should read “Charging Battery” within two minutes from the transformer being installed. See ‘Your Battery’.

Check the battery contacts. Are they clean and dry? Check the battery temperature. If it is warm, let it cool before recharging. Is it an old battery? Battery performance will decline after several years use. Replace the battery.

Are you using a Motorola original battery? See ‘Your Battery’.

The battery drains faster than normal

Y ou can’t cancel Call Forwarding or Call Barring

o symbol is ﬂashing

The

You can’t make international calls

Are you in an area of variable coverage? This uses extra battery power. Is it a new battery? A new battery will need two to three charge/discharge cycles to attain normal

performance. See ‘Charging a New Battery’

Is it an old battery? Battery performance will decline after several years use. Replace the battery. Is it a battery that hasn’t been completely discharged? Allow the battery to fully discharge (until the

phone turns itself off) and then charge the battery overnight.

Check that the Frequency Of Search feature in the Network Selection menu has not been set to

Fast or Continuous. See ‘Network Search’.

Check that the Battery Saving Mode feature has not been set to Off. Are you using your phone in extreme temperatures? At extreme hot or cold temperatures, battery

performance is signiﬁcantly reduced.

Wait until you are in an area with good network coverage and try again.

There is not enough memory available to store another SMS message. Use the Messages menu to

delete one or more existing messages. Some Service Providers automatically bar the ability to make international calls. Contact your

Service Provider.

English

Your Personal Handsfree System is not operating properly

What to do if...

Check all of the connections and make sure that they are inserted correctly. Check the connections to make sure that they are fully inserted.

U.S. Food and Drug Administration (FDA)

The U.S. Food and Drug Administration’s Center for Devices and Radiological Health Consumer Update on Mobile Phones

FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known--and what remains unknown--about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions.

Why the concern?

Mobile phones emit low levels of radiofrequency energy (i.e., radiofrequency radiation) in the microwave range while being used. They also emit very low levels of radiofrequency energy (RF), considered non-signiﬁcant, when in the stand-by mode. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However , it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well. Although some research has been done to address these questions, no clear picture of the biological effects of this type of radiation has emerged to date. Thus, the available science does not mobile phones are absolutely safe, or that they are unsafe. However, the available scientiﬁc evidence does not demonstrate any adverse health effects associated with the use of mobile phones.

allow us to conclude that

What kinds of phones are in question?

Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversation. These types of mobile phones are of concern because of the short distance between the phone's antenna--the primary source of the RF--and the person's head. The exposure to RF from mobile phones in which the antenna is located at greater distances from the user (on the outside of a car , for example) is drastically lower than that from hand-held phones, because a person's RF exposure decreases rapidly with distance from the source. The safety of socalled "cordless phones," which have a base unit connected to the telephone wiring in a house and which operate at far lower power levels and frequencies, has not been questioned.

U.S. Food and Drug Administration (FDA)

English

How much evidence is there that hand-held mobile phones might be harmful?

Brieﬂy, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientiﬁc evidence is conﬂicting and many of the studies that have been done to date have suffered from ﬂaws in their research methods. Animal experiments investigating the effects of RF exposures characteristic of mobile phones have yielded conﬂicting results. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. In one study, mice genetically altered to be predisposed to developing one type of cancer developed more than twice as many such cancers when they were exposed to RF energy compared to controls. There is much uncertainty among scientists about whether results obtained from animal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the studies that showed increased tumor development used animals that had already been treated with cancer-causing chemicals, and other studies exposed the animals to the RF virtually continuously--up to 22 hours per day.

For the past ﬁve years in the United States, the mobile phone industry has supported research into the safety of mobile phones. This research has resulted in two ﬁndings in particular that merit additional study:

1 In a hospital-based, case-control study, researchers looked for

an association between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a benign tumor of the nerve sheath). No statistically signiﬁcant association was found between mobile phone use and acoustic neuroma. There was also no association between mobile phone use and gliomas when all types of gliomas were considered together. It

English

U.S. Food and Drug Administration (FDA)

should be noted that the average length of mobile phone exposure in this study was less than three years.

When 20 types of glioma were considered separately, however, an association was found between mobile phone use and one rare type of glioma, neuroepithelliomatous tumors. It is possible with multiple comparisons of the same sample that this association occurred by chance. Moreover, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use. Most cancer causing agents increase risk with increased exposure. An ongoing study of brain cancers by the National Cancer Institute is expected to bear on the accuracy and repeatability

of these results.

2 Researchers conducted a large battery of laboratory tests to

assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material. The cells in this assay showed changes after exposure to simulated cell phone radiation, but only after 24 hours of exposure. It is possible that exposing the test cells to radiation for this long resulted in heating. Since this assay is known to be sensitive to heating, heat alone could have caused the abnormalities to occur . The data alr eady in the literature on the r esponse of the micronucleus assay to RF are conﬂicting. Thus, follow-up research is necessary.

FDA is currently working with government, industry, and academic groups to ensure the proper follow-up to these industry-funded research ﬁndings. Collaboration with the Cellular Telecommunications Industry Association (CTIA) in particular is expected to lead to FDA providing research recommendations and scientiﬁc oversight of new CTIA-funded research based on such recommendations.

Two other studies of interest have been reported recently in the literature:

1 Two groups of 18 people were exposed to simulated mobile

phone signals under laboratory conditions while they performed cognitive function tests. There were no changes in the subjects' ability to recall words, numbers, or pictures, or in their spatial memory, but they were able to make choices more quickly in one visual test when they were exposed to simulated mobile phone signals. This was the only change noted among more than 20 variables compared.

2 In a study of 209 brain tumor cases and 425 matched

controls, there was no increased risk of brain tumors associated with mobile phone use. When tumors did exist in certain locations, however, they were more likely to be on the side of the head where the mobile phone was used. Because this occurred in only a small number of cases, the increased likelihood was too small to be statistically signiﬁcant.

In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems associated with use of mobile phones. FDA continues to work with all parties, including other federal agencies and industry, to assure that research is undertaken to provide the necessary answers to the outstanding questions about the safety of mobile phones.

What is known about cases of human cancer that have been reported in users of hand-held mobile phones?

Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. population at a rate of about 6 new cases per 100,000 people each year. At that rate, assuming 80 million users of mobile phones (a number increasing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones. Thus it is not possible to tell whether any individual's cancer arose because of the phone, or whether it would have happened anyway . A key question is whether the risk of getting a particular form of cancer is greater among people who use mobile phones than among the rest of the population. One way to answer that question is to compare the usage of mobile phones among people with brain cancer with the use of mobile phones among appropriately matched people without brain cancer. This is called a case-control study. The current casecontrol study of brain cancers by the National Cancer Institute, as well as the follow-up research to be sponsored by industry, will begin to generate this type of information.

U.S. Food and Drug Administration (FDA)

English

What is FDA's role concerning the safety of mobile phones?

Under the law, FDA does not review the safety of radiationemitting consumer products such as mobile phones before marketing, as it does with new drugs or medical devices. However, the agency has authority to take action if mobile phones are shown to emit radiation at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of mobile phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.

Although the existing scientiﬁc data do not justify FDA regulatory actions at this time, FDA has urged the mobile phone industry to take a number of steps to assure public safety. The agency has recommended that the industry:

• support needed research into possible biological effects of RF of the type emitted by mobile phones;

• design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and

• cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health.

At the same time, FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level. These agencies are:

• National Institute for Occupational Safety and Health

• Environmental Protection Agency

• Federal Communications Commission

• Occupational Health and Safety Administration

• National Telecommunications and Information Administration The National Institutes of Health also participates in this group.

In the absence of conclusive information about any possible risk, what can concerned individuals do?

If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if people are concerned about avoiding even potential risks, there are simple steps they can take to do so. For example, time is a key factor in how much exposure a person receives. Those persons who spend long periods of time on their hand-held mobile phones could consider holding lengthy conversations on conventional phones and reserving the hand-held models for shorter conversations or for situations when other types of phones are not available.

People who must conduct extended conversations in their cars every day could switch to a type of mobile phone that places more distance between their bodies and the source of the RF, since the exposure level drops off dramatically with distance. For example, they could switch to:

• a mobile phone in which the antenna is located outside the vehicle,

• a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package, or

• a headset with a remote antenna to a mobile phone carried at the waist.

Again, the scientiﬁc data do not are harmful. But if people are concerned about the radiofrequency energy from these products, taking the simple precautions outlined above can reduce any possible risk.

demonstrate that mobile phones

English

U.S. Food and Drug Administration (FDA)

Where can I ﬁnd additional information?

For additional information, see the following websites: Federal Communications Commission (FCC) RF Safety

Program (select "Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters"): http://www.fcc.gov/oet/rfsafety

World Health Organization (WHO) International Commission on Non-Ionizing Radiation Protection (select Qs & As): http://www.who.int/emf

United Kingdom, National Radiological Protection Board: http://www.nrpb.org.uk

Cellular Telecommunications Industry Association (CTIA): http://www

.wow-com.com

U.S. Food and Drug Administration (FDA) Center for Devices and Radiological Health: http://www.fda.gov/cdrh/consumer/

1 Muscat et al. Epidemiological Study of Cellular Telephone Use and

Malignant Brain Tumors. In: State of the Science Symposium;1999 June 20; Long Beach, California.

2 Tice et al. Tests of mobile phone signals for activity in genotoxicity and

other laboratory assays. In: Annual Meeting of the Environmental Mutagen Society; March 29, 1999, Washington, D.C.; and personal communication, unpublished results.

3 Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and

Varey, A. Effect of a 915-MHz simulated mobile phone signal on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.

4 Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of

cellular telephones and the risk for brain tumors: a case-control study. Int. J. Oncol., 15: 113-116, 1999.

U.S. Food and Drug Administration (FDA)

English

U.S. Food and Drug Administration (FDA)

Patent Information

Manufactured under one or more of the following patents:

4121218 4127824 4128740 4138681 4193036 4254382 4302845 4312074 4327319 4329666 4369516 4369522 4378603 4390963 4398265 4400584 Re.31470 4431977 4434461 4455534 4462098 4484153 4485486 4486624 4491972 4504834 D278708 4523155 4546329 4549311 4550426 4551696 4564821 D282169 4571595 4573017 4574243 4585957 4602218 D284759 4616314 4617520 4626309 4628529 4629829 4630304 4630305 4633141 4636593 4636741 4644351 D288432 4648125 4649543 D288683 4654655 4654867 4662691 4667333 4668917 4670747 4672502 4692726 4704588 D292578 4706036 D292920 4710724 4711361 4715063 4716319 4716391 4723305 D294257 4727306 4727583 4730195 4734635 4737976 4740794 4741018 4741034 4742562 D295627 D295975 4751737 4761621 4764737 D297734 D297735 D297736 4777564 Re.32768 4783697 D299232 4797929 4798975 4800348 4802236 4803726 4809356 4811377 4811404 4816774 4817157 4823098 D300742 D300827 4827226 4827507 4829274 4829543 4837534 4843621 4845772 4851966 4868576 4872196 4873683 4876552 4876740 D304189 4879533 4885553 4887050 4890199 D305427 4896124 4896361 4897873 D305717 4903327 D306163 4904549 4905288 4905301 D306299 4910470 4912602 4916262 4918403 4918732 4922209 4924194 4930126 D309301 D309451 4945570 4954796 4956854

4963812 4963843 4965537 4970475 4972355 4972432 4972455 4975808 4982108 4984219 4989230 D314173 4992753 4998289 D315330 D315543 5004992 5008925 5010309 5010570 5014294 5014346 D316859 5017856 5018188 5020076 5020091 5020092 5020093 5023580 5023866 5023911 5025387 5028859 5029233 5036532 5040127 5042071 5045824 5053924 5055800 5055802 5055803 5057762 5058136 5059885 5060264 5060294 5063340 5065408 5067139 5068625 5070310 5077757 5081674 5083304 5093632 D325028 5107487 5109536 5111162 5113400 5113436 5117441 5117449 5121047 5121288 5121412 5122722 D327062 5124889 5127040 5127042 5128834 5130682 5130683 5133010 5136135 5140286 5142551 5142696 5148471 5150075 5150359 5150384 5152006 5152007 5153590 5157693 5159283 5160898 5163159 5164652 5166596 5166642 5170173 5170492 5173672 5175759 5175874 5177458 5182749 5185566 5187640 5187809 5192924 5193223 5195106 5195108 5198887 5200655 5201069 5202654 5203009 D334746 5204977 5205751 5208566 5210793 5211581 5212815 5212826 5214675 5214774 5220290 5222078 5222104 5222251 5224122 5230007 5230093 5233506 5233633 5235492 5237257 5237570 5239127 5239294 5241545 5241548 5241592 5241650 5241688 5241693 D338887 5242767 D339127 D339335 D339336 D339337 5247544 D339578 5249302 5250916 5251331 5253292

Patent Information

English

5255292 5257414 5259005 5260170 5260988 5261119 5262710 5263052 5263055 5265219 D341589 5271042 D342248 5276685 5276707 5276913 5278527 5278832 5278994 5280637 5280644 D343615 D343616 D343834 D343835 5287553 5287555 5287556 5289505 D344512 5297142 5299232 5301364 5301365 5308716 5312705 5321847 5323421 5325429 D348250 D348427 5327642 D348665 D348666 D348668 5331123 D349273 5336984 5338909 D350113 D350348 D350349 D350350 5349588 5351245 D351375 5359696 5361400 5363071 5365549 D352503 5366826 5367538 5367558 5371791 D353131 5373101 D353361 5375143 5375258 D353587 D353588 5379324 5384825 5392000 5392023 5396654 D356309 5402447 5404120 5404582 5406146 5406562 D357224 D357457 5410275 5414711 D358148 5420759 5424689 5428820 5428836 5430416 5432017 5434947 5436589 5436802 5438684 D361070 5444764 5446763 5448763 5448770 5448771 5453997 D362840 D362852 5461643 5463628 5465412 5469177 5475752 D365094 5477192 D365817 5486843 5487184 5488335 5490177 5493198 5493700 5493714 5495206 5497126 5497383 D367640 5499273 5504812 5506490 D368696 5508709 5510693 5511235 5513078 5513382 D369359 5513996 D369598 D369797 5519303 5519346 5519506 5519777 D370016 D370463 5526398 D370672 5530922 5539360 5542103 5542106 5544250 D372481 5546380 D372896 5551078 5555550 5559471 D374013 5561436 D374227 D374424

5565881 5570453 5572223 5572224 5577267 5577268 D375932 D375952 Other patents pending

English

Patent Information

Index

Access Internet .....................................34

Accessories Add entry

To SIM card memory Adjust Contrast Adjust ring volume Automatic lock Automatic redial Available networks

...........................................73

................. 42, 70

....................................60

...............................59

.....................................60

...................................24

...............................65

Bar incoming calls ................................50

Bar outgoing calls Batteries

Charging

Installing the Batteries

Low battery warning

Maintaining

Removing Battery charge indicator Battery meter Battery saving mode Blocked message Buttons

Volume

.................................50

.........................................17

......................17

........................20

.....................................18

........................................18

.......................16

................................ 47, 70

.............................62

...........................23, 61

............................................15

Call forwarding ............................. 48, 71

Call holding Call metering Call meters menu Call related features menu Call timers Call Transfer Call waiting Calling a number Cancel all forwarding Capacity

Checking battery capacity

Cell broadcast

Battery saving mode

Messages Change bar password Change SIM PIN2 code Change unlock code Characters Check capacity

..........................................28

.......................................67

.................................67

...................47

............................................68

.........................................31

..........................................28

..................................24

...........................71

...............................................43

................47

......................................56

........................62

.........................................53

..........................51

.........................61

............................60

............................................41

.....................................43

Conference Call

Call Waiting End Active And Held Hold Call Make a New Call Reconnect Reconnect Held Call Restrict My Number Split Call Switch Calls

Contrast

Adjust Contrast

...................................28

.....................................31

........................28

.........................................27

.............................27

.......................................28

.........................28

.........................27

..........................................28

.....................................28

...............................60

Delete

Last ten calls Message

Phone book entries Detailed forwarding Dialing phone book numbers Display

.................................................16

Display characters Displaying your own phone number DTX

.....................................................62

....................................44

................................... 54, 55

..........................42

.............................49

...............25

................................41

.....44

Index

English

Earpiece connector .............................. 16

Editing messages Emergency calls Ending a phone call Entering characters Erase name and number Extended menus

................................. 53

................................... 25

............................. 26

..............................40

......................42

..............................7, 62

Fault finding ..................................75, 83

Find entry by location Find entry by name Find new network Fixed dialing

Calling numbers Setting

........................................ 45

............................................ 45

....................42, 69

........................41, 69

............................... 66

.............................. 45

Hold Call ............................................. 27

In use symbol ...................................... 16

Initiating Transfer Call Installing the Batteries International phone calls Internet

Accessing

Internet service alerts

........................................ 34

.......................... 31

......................... 17

...................... 25

...........................37

Language selection .............................. 62

Last Calls Received Last ten calls Lifetime timer Lock now Locking the keypad Low battery warning

......................................60, 70

............................... 44

..................................43, 70

...................................... 68

............................. 23

........................... 20

Making a phone call ............................ 24

Master clear Master reset Menu

Access Internet

Menus

Call Forwarding menu Call meters menu Call related features menu Extended menu Messages menu Network selection menu Options menu Personalized menus Phone Book menu Phone setup menu Quick Access menu Send Messages menu

Short menu Message editor Message settings

........................................ 63

............................... 34

..................... 48

............................ 67

.............. 47

................................. 7

.............................. 52

.................64

................................. 33

.......................... 7

.......................... 39

.......................... 58

......................... 69

..................... 55

....................................... 7

..............................55, 70

................................. 56

Messages

Call holding/call waiting messages Cell broadcast messages Creating and editing Reading SMS messages

Sending SMS messages Messages menu Mobile Internet

Display features

Editing Text

Ending the session

Internet service alerts

Making and Receiving Calls

Starting the session

Summary of keys My phone number(s) MyMotorola.com

Accessing

.................................. 52

.............................. 34

..................................... 36

........................................ 38

................. 53

....................... 53

................... 53

................... 55

.......................... 37

...................... 37

......................... 36

............................ 37

........................... 44

Names

Entering Network search Network selection menu Networks

Automatic search

Finding new networks

Preferred networks New security code

.......................................... 40

................................... 65

...................... 64

............................ 65

..................... 66

......................... 66

............................... 61

.. 29

............. 36

English

Index

One-touch dial setting ..........................46

One-touch dialing Options menu Outgoing messages

................................24

......................................33

.......................55, 70

Pauses

Inserting into phone numbers Personal numbers Personalized menu Phone book

Call number

Deleting/erasing entries

Dialing phone book numbers

Modify name or number

Preventing access to

Storing numbers - see Add Entry Phone calls

Automatic redial

Dialing phone book numbers

Emergency calls

Ending

International

Making

One-touch dialing

Receiving Phone setup menu Phone status PIN code

Entering

Setting and changing

.................................41

.................................7

.....................................42

........................43

..............................24

...............................25

.............................................26

....................................25

............................................24

............................24

.........................................26

...............................58

........................................63

...........................................23

.......................60

..........25

...................42

...........25

..................42

....42

...........25

PIN2 code Prevent access (to Phone Book)

.............................................61

............43

Quick access menu ...............................69

Customizing

....................................72

Reading SMS messages ........................53

Received messages Receiving a phone call Redialing the last number called Removing your batteries Require SIM card PIN Restrict My Number Restrict my phone number Return call Ring tones

............................................54

............................................59

...............................54

..........................26

...........24

.......................18

............................60

..............................27

............48, 71

Security code

Changing Select Phone Line Sending SMS messages Service center Set in-call display Set Ringer Tone Set Ringer Tone 2 Setup fixed dialing Short menu Short message service symbol Show battery meter

........................................61

.................................59

........................55

.......................................56

..................................68

....................................59

.................................59

................................45

............................................7

...............16

.......................47, 70

Show call timers Show Services Signal strength symbol SIM card

Insertion/removal PIN code

PIN2 code SMS messages Special keys Split Call Status indicator

Battery saving mode Status review Switch Calls Symbols

...............................................16

............................67, 70

......................................43

.........................16

.............................21

................................... 23, 60

........................................61

.....................................52

..........................................15

..............................................28

........................62

.......................................63

.........................................28

Timers ..................................................68

Tones

Setting ringer tones Transfer Call Troubleshooting Turn Mute On or Off

.........................................31

.........................59

............................75, 83

............................28

Unblocking your phone ........................61

Unconditional call forward Unlock code

Setting and changing

...................71

.......................59

Index

English

Voicemail

Number

Volume

Adjusting the earpiece and Adjusting the ringer volume

Buttons

..........................................56

keypad volume

............................. 15

........................................... 15

............ 59

What to do if... ..............................75, 83

English

Index

6809425A15

Motorola T2282 user Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Quick Reference

Introduction

Understanding this Manual

j Short, Extended and Personalized Menus

Total Customer Satisfaction

Contents

Safety

Hand-Held Portable PCS Telephone

About Your Phone, Battery and SIM Card

Your Battery

Your SIM Card

Making and Receiving Phone Calls

Switching the Phone On and Off

Making a Phone Call

In-Call Menu

j Call Holding and Call Waiting

Making a Conference Call

Transfer Call

Using the Options Menu

Access Internet

The Phone Book Menu

Using the Phone Book Menu

Call Related Features Menu

Messages Menu

Phone Setup Menu

Network Selection Menu

Call Meters Menu

Using the Quick Access Menu

Customizing the Quick Access Menu

Accessories

What to do if...

U.S. Food and Drug Administration (FDA)

Patent Information

Index