Page 1
Mobile Release 5.14.10
MTP850
FEATURE USER GUIDE
March 2014
© 2014 Motorola Solutions, Inc. All rights reserved.
EN
*6866537D80*
6866537D80-AC
Page 2
Page 3
Contents
List of Figures................................................................................................................................ 11
List of Tables.................................................................................................................................. 13
Chapter 1: General Information...........................................................................15
Safety Information...............................................................................................................................................15
Copyrights........................................................................................................................................................... 15
Icon Conventions.................................................................................................................................................16
Using this Guide..................................................................................................................................................16
Feature and Service Availability......................................................................................................................... 17
Chapter 2: Getting Started....................................................................................19
Product Technical Information............................................................................................................................19
Before Power On.................................................................................................................................................19
Attaching the Antenna.............................................................................................................................19
Installing the Battery............................................................................................................................... 20
Removing the Battery..............................................................................................................................21
Charging the Battery............................................................................................................................... 21
Charging Indicators................................................................................................................................. 22
Low Battery Indication............................................................................................................................22
Controls and Indicators....................................................................................................................................... 23
Display.................................................................................................................................................................26
Configurable Idle Screen.........................................................................................................................27
Status Icons..........................................................................................................................................................27
Powering On the Radio....................................................................................................................................... 31
Unlocking Your Radio........................................................................................................................................ 31
Unblocking Your Radio.......................................................................................................................... 31
Locking/Unlocking the Keys/Buttons.................................................................................................................32
Holding Your Radio............................................................................................................................................ 32
Setting Flip Display.............................................................................................................................................33
Entering TMO / DMO Mode...............................................................................................................................33
Transmit Inhibit Mode.........................................................................................................................................33
Selecting Talkgroups...........................................................................................................................................34
Talkgroup Icon Selection.................................................................................................................................... 34
Using Timed Talkgroup Change......................................................................................................................... 35
Activating Talkgroup Scanning...........................................................................................................................35
Broadcast Call..................................................................................................................................................... 35
Ambience Listening (AL) Call............................................................................................................................36
One-Touch Button Feature..................................................................................................................................36
Terminal Temporary Disable/Enable.................................................................................................................. 37
Terminal Permanent Disable...............................................................................................................................37
High/Low Audio Toggle..................................................................................................................................... 38
Using High Audio................................................................................................................................... 38
Using Low Audio.................................................................................................................................... 38
During the Call.................................................................................................................................................... 38
Writing Text........................................................................................................................................................ 38
Selecting Text Entry Modes....................................................................................................................39
Selecting Text Entry Methods and Languages........................................................................................39
Text Entry Icons...................................................................................................................................... 39
Keys Usage..............................................................................................................................................40
Contents | 3
Page 4
4 | Contents
Writing in iTAP Alphanumeric...............................................................................................................41
Writing in TAP Alphanumeric................................................................................................................42
Word Locking..........................................................................................................................................42
Adding Words to the Dictionary............................................................................................................. 43
Home Display Text Message.............................................................................................................................. 43
Chapter 3: Modes...................................................................................................45
Using Networks...................................................................................................................................................45
Trunked Mode Operation.................................................................................................................................... 45
Entering TMO Mode...............................................................................................................................46
Selecting Talkgroups...............................................................................................................................46
Making Group Calls in TMO.................................................................................................................. 46
Receiving Group Calls in Idle.................................................................................................................46
Receiving Group Calls during Ongoing Group Calls............................................................................. 46
Dynamic Group Number Assignment (DGNA)......................................................................................47
DGNA Reception.................................................................................................................................... 47
DGNA Auto Select Group...................................................................................................................... 47
DGNA Auto Reselect Group...................................................................................................................47
Viewing DGNA Talkgroups................................................................................................................... 47
Broadcast Calls Initiated by Users.......................................................................................................... 47
Initializing Broadcast Calls..................................................................................................................... 48
Phone and PABX Calls........................................................................................................................... 48
Private Call..............................................................................................................................................48
Making Private Calls...............................................................................................................................48
Assistance Call........................................................................................................................................ 48
Call Modification.................................................................................................................................... 49
Local Site Trunking.............................................................................................................................................49
Entering Local Site Trunking..................................................................................................................49
Exiting Local Site Trunking....................................................................................................................50
Direct Mode Operation........................................................................................................................................50
Entering DMO Mode...............................................................................................................................50
Selecting Talkgroups...............................................................................................................................50
Making Group Calls in DMO..................................................................................................................51
Receiving Group Calls in Idle.................................................................................................................51
Private Call..............................................................................................................................................51
Making Private Calls...............................................................................................................................51
Private Call With Presence Check...........................................................................................................52
Talkgroup for Individual Calls................................................................................................................52
Communication through Repeaters.........................................................................................................52
Communication through Gateways.........................................................................................................52
Selecting DMO Group Call Options....................................................................................................... 53
Transmit Inhibit Mode.........................................................................................................................................53
Emergency Operations........................................................................................................................................ 54
Emergency Group Call............................................................................................................................55
Making Emergency Group Calls.............................................................................................................55
Receiving Emergency Group Calls......................................................................................................... 55
Non-Tactical Emergency.........................................................................................................................56
Emergency Individual Calls (Private or MS-ISDN)............................................................................... 56
Emergency Alarm....................................................................................................................................56
Emergency SDS Status............................................................................................................................56
Emergency Hot Microphone................................................................................................................... 56
Alternating Hot Microphone................................................................................................................... 57
Silent Emergency Mode.......................................................................................................................... 57
Invisible Emergency................................................................................................................................58
Emergency Mode by Dialing.................................................................................................................. 58
Page 5
Contents | 5
Disaster Alert...........................................................................................................................................58
Initializing Disaster Alert Calls...............................................................................................................58
Exiting Emergency Operations............................................................................................................... 58
Repeater Mode.................................................................................................................................................... 59
Entering the Repeater Mode....................................................................................................................59
Setting Monitor Option........................................................................................................................... 59
Encryption in the Repeater Mode............................................................................................................60
Chapter 4: GPS Location Service.........................................................................61
Enhancing GPS Performance.............................................................................................................................. 62
Enabling GPS...................................................................................................................................................... 62
GPS Icon..............................................................................................................................................................62
GPS Different Location Displays........................................................................................................................62
Viewing Your Position........................................................................................................................................63
Changing GPS Accuracy.....................................................................................................................................63
GPS – Things to Keep in Mind........................................................................................................................... 63
Chapter 5: Main Menu.......................................................................................... 65
Scrolling through the Menu.................................................................................................................................65
Menu Icons..........................................................................................................................................................65
Messages............................................................................................................................................................. 67
New Message.......................................................................................................................................... 67
Sending Messages to Private/Phone............................................................................................67
Sending Messages to Groups...................................................................................................... 67
Sending Store and Forward Messages.........................................................................................67
Delivery Report........................................................................................................................... 68
Viewing Delivery Reports...........................................................................................................68
Configuring Delivery Reports.....................................................................................................68
Inbox........................................................................................................................................................69
Entering the Inbox.......................................................................................................................69
Receiving New Messages............................................................................................................69
Using Submenus in the Inbox and the Outbox............................................................................69
Embedded Number......................................................................................................................70
Storing Numbers from Messages................................................................................................ 70
Calling Numbers in Messages.....................................................................................................70
Making Group Calls on theTalkgroup of the Message Sender................................................... 70
Immediate Message.....................................................................................................................71
Outbox.....................................................................................................................................................71
CO Box....................................................................................................................................................71
RMS Box.................................................................................................................................................71
WAP Box................................................................................................................................................ 71
Templates................................................................................................................................................ 72
Sending User-Defined Templates............................................................................................... 72
Setting User-Defined Templates................................................................................................. 72
Predefined Templates..............................................................................................................................72
Viewing Predefined Templates................................................................................................... 72
Sending Predefined Templates....................................................................................................72
Status Messages.......................................................................................................................................73
Viewing a Status Message Number.............................................................................................73
Sending Status Messages.............................................................................................................73
Targeted Status Messages........................................................................................................... 73
Sending Targeted Status Messages............................................................................................. 73
Contacts...............................................................................................................................................................74
Creating Contacts.................................................................................................................................... 74
Page 6
6 | Contents
Editing Contacts...................................................................................................................................... 75
Deleting Numbers....................................................................................................................................75
Deleting Contacts.................................................................................................................................... 75
Checking Capacity.................................................................................................................................. 75
Dialing through the Contact List.............................................................................................................76
Browser............................................................................................................................................................... 76
Security................................................................................................................................................................76
PIN Protect.............................................................................................................................................. 76
Protecting the Radio with a PIN Code........................................................................................ 76
Unblocking Your Radio.............................................................................................................. 76
Changing PIN Codes...................................................................................................................77
Keylock Setup......................................................................................................................................... 77
Keypad Lock Notification...........................................................................................................77
Setting Automatic Keylock Delay...............................................................................................77
Setting Keylock on Startup..........................................................................................................78
Air Encryption.........................................................................................................................................78
Viewing the Air Encryption State............................................................................................... 78
Air Encryption Key Deletion...................................................................................................... 78
K Validity................................................................................................................................................78
Verifying K Validity................................................................................................................... 79
SCK (Air Interface Encryption Class 2)..................................................................................................79
TMO SCK................................................................................................................................... 79
DMO SCK...................................................................................................................................79
Changing DMO SCK.................................................................................................................. 79
Verifying TMSCK Validity.....................................................................................................................79
Verifying DMSCK Validity.................................................................................................................... 80
Covert Mode............................................................................................................................................80
Activating the Covert Mode........................................................................................................80
Setting to Vibrate in the Covert Mode........................................................................................ 80
SDS Remote Control...............................................................................................................................81
Setting SDS Remote Control.......................................................................................................81
Setup....................................................................................................................................................................81
Vibrate.....................................................................................................................................................81
Setting Default Vibrate................................................................................................................81
Setting Detail Vibrate..................................................................................................................81
Ring Style................................................................................................................................................82
Setting Ring Style........................................................................................................................82
Set Volume..............................................................................................................................................82
Setting Volume............................................................................................................................82
Language................................................................................................................................................. 83
Setting Language.........................................................................................................................83
Data Setup............................................................................................................................................... 83
Setting Data Function..................................................................................................................83
Audio.......................................................................................................................................................83
Audio Profiles..............................................................................................................................83
Setting Audio Profiles................................................................................................................. 84
Howling Suppression.................................................................................................................. 84
Setting Howling Suppression...................................................................................................... 84
Audio Toggle...............................................................................................................................84
Setting Audio Toggle.................................................................................................................. 84
Volume Adjustment Mode.......................................................................................................... 84
Setting Volume Adjustment Mode..............................................................................................85
Tones....................................................................................................................................................... 85
Keypad Tone............................................................................................................................... 85
Setting Keypad Tone...................................................................................................................85
All Tones..................................................................................................................................... 85
Page 7
Contents | 7
Setting All Tones.........................................................................................................................85
Talk Permit..................................................................................................................................85
Setting Talk Permit......................................................................................................................85
Clear to Send............................................................................................................................... 86
Setting Clear to Send...................................................................................................................86
Periodic Alert.............................................................................................................................. 86
Setting Periodic Alert.................................................................................................................. 86
D-PTT Tones...............................................................................................................................86
Setting D-PTT Tones...................................................................................................................86
Display.....................................................................................................................................................87
Setting Flip Display.....................................................................................................................87
Setting Font Level....................................................................................................................... 87
Setting Large Idle Font................................................................................................................87
Setting Extra Zoom..................................................................................................................... 88
Setting Extended Status Icons..................................................................................................... 88
Setting Screen Saver....................................................................................................................88
Setting Backlight......................................................................................................................... 88
Setting Wallpaper........................................................................................................................89
Setting Contrast........................................................................................................................... 89
Time and Date......................................................................................................................................... 89
Setting Time and Date on the Display.........................................................................................89
Setting the Time Format..............................................................................................................89
Setting the Time Manually..........................................................................................................90
Setting the Date Format...............................................................................................................90
Setting the Date Manually...........................................................................................................90
Setting Time Offset..................................................................................................................... 90
Setting Automatic Updates for the Time and Date .................................................................... 91
Energy Economy..................................................................................................................................... 91
Enabling Energy Economy..........................................................................................................91
Viewing the Energy Economy Status..........................................................................................91
Transmission Power Class.......................................................................................................................91
Selecting RF Power.....................................................................................................................91
Book On.................................................................................................................................................. 92
Editing Book On Settings............................................................................................................92
Rotary Knob............................................................................................................................................ 92
Setting Rotary Knob Mode..........................................................................................................92
Setting Rotary Lock.....................................................................................................................93
Setting In Keypad Lock...............................................................................................................93
Setting Rotary Knob Wrap Around.............................................................................................93
Setting Rotary Knob Scroll Range.............................................................................................. 93
Setting Rotary Knob Talkgroup Selection.................................................................................. 94
Setting Rotary Knob Function Keys........................................................................................... 94
Group Setup.........................................................................................................................................................94
Scan......................................................................................................................................................... 94
Activating Talkgroup Scanning...................................................................................................94
Setting Talkgroups in the Active Scan List.................................................................................95
Setting Scan Lists........................................................................................................................ 95
Deleting Talkgroups from Scan Lists..........................................................................................95
My Groups...............................................................................................................................................95
Favorites.............................................................................................................................................................. 95
Favorite Folders.......................................................................................................................................96
Favorite Talkgroups................................................................................................................................ 96
Favorite Contact Numbers.......................................................................................................................96
Making Private Calls to Favorite Contact Numbers............................................................................... 96
Adding Folders to Favorites....................................................................................................................96
Adding Contact Numbers to Favorites....................................................................................................97
Page 8
8 | Contents
Adding Talkgroups to Favorites..............................................................................................................97
Managing Folders in Favorites................................................................................................................97
Deleting Items from Favorites Folder..................................................................................................... 98
Deleting All Items from Favorite Folders............................................................................................... 98
My Info................................................................................................................................................................98
Viewing and Modifying Personal Information....................................................................................... 98
Recent Calls.........................................................................................................................................................98
Viewing Recent Calls..............................................................................................................................99
Calling from Recent Calls....................................................................................................................... 99
Storing Recent Calls to Contacts.............................................................................................................99
Deleting Recent Calls............................................................................................................................100
Shortcuts............................................................................................................................................................100
Creating Menu Shortcuts.......................................................................................................................100
Editing Menu Shortcut Lists..................................................................................................................100
RUI.................................................................................................................................................................... 101
Logging On............................................................................................................................................101
Logging Off...........................................................................................................................................101
Networks........................................................................................................................................................... 101
Selecting Network Operation Mode......................................................................................................101
Selecting Your Network........................................................................................................................102
Using the Select Net Registration......................................................................................................... 102
Using the Foreign Network Registration...............................................................................................102
Using Any Network...............................................................................................................................102
Using the Migrate To Registration........................................................................................................102
Location.............................................................................................................................................................103
Viewing Your Position..........................................................................................................................103
Changing GPS Accuracy.......................................................................................................................103
Packet Data........................................................................................................................................................103
Viewing Data Statistics......................................................................................................................... 103
Viewing Encryption Status....................................................................................................................104
Chapter 6: Features............................................................................................. 105
Private Call........................................................................................................................................................105
Making Private Calls.............................................................................................................................105
Radio Messaging System (RMS)...................................................................................................................... 105
RMS Icons.............................................................................................................................................106
Sending an RMS Status.........................................................................................................................106
One-Touch Dial.................................................................................................................................................106
Talkgroup Dialing by Index.............................................................................................................................. 106
Viewing the Talkgroup Speed Number.................................................................................................107
Selecting Talkgroups by Index..............................................................................................................107
Phone and PABX Calls..................................................................................................................................... 107
Making Phone or PABX Calls.............................................................................................................. 107
Phone/PABX Speed Dial...................................................................................................................................107
Using the Phone/PABX Speed Dial...................................................................................................... 107
DTMF Overdial.................................................................................................................................................108
Short Number Dial............................................................................................................................................ 108
RUA/RUI...........................................................................................................................................................108
WAP.................................................................................................................................................................. 109
WAP Browser........................................................................................................................................109
Entering the Browser.............................................................................................................................109
Entering Browser Menu Panes..............................................................................................................109
Tips for Browsing..................................................................................................................................109
Creating Bookmarks through the Navigate Pane...................................................................... 109
Creating Bookmarks through the Bookmarks Pane.................................................................. 110
Page 9
Contents | 9
Using Bookmarks......................................................................................................................110
Creating Hotkeys.......................................................................................................................110
Using Hotkeys........................................................................................................................... 110
Saving Pages..............................................................................................................................110
Selecting Saved Pages...............................................................................................................111
Disabled Packet Data Service................................................................................................................111
Disabled Browser Entry........................................................................................................................ 111
Keys Usage............................................................................................................................................111
Browser Menu Panes Overview............................................................................................................112
Navigate Pane........................................................................................................................................113
Advanced...............................................................................................................................................113
Bookmarks Pane....................................................................................................................................114
Working with the Options Pane for Selected Bookmarks.........................................................114
Working with the Saved Pages Folder...................................................................................... 114
History Pane.......................................................................................................................................... 114
Navigating to Recently Visited URLs.......................................................................................114
Tools Pane............................................................................................................................................. 115
Options Pane..........................................................................................................................................115
Image Pane............................................................................................................................................ 115
Text Input Pane..................................................................................................................................... 115
WAP Push............................................................................................................................................. 116
New WAP Messages.................................................................................................................116
Viewing WAP Messages...........................................................................................................116
Call-Out.............................................................................................................................................................116
Types of Call-Out Alerts....................................................................................................................... 117
Call-Out Modes Interaction...................................................................................................................117
Call-Out Service Phases........................................................................................................................ 117
Shadow Groups (Address Bundle)....................................................................................................................118
Appendix A: Tones...............................................................................................119
Appendix B: LED Indications.............................................................................121
Appendix C: Troubleshooting.............................................................................123
Appendix D: Maintenance...................................................................................127
Storage...............................................................................................................................................................127
Extending Battery Life...................................................................................................................................... 127
Battery Charging Temperature..........................................................................................................................127
Battery Charging Rules..................................................................................................................................... 128
Additional Battery Warnings/Cautions............................................................................................................. 128
Looking after Your Radio................................................................................................................................. 128
Page 10
10 | Contents
Page 11
List of Figures | 11
List of Figures
Figure 1: Trunked Mode Operation ................................................................................................45
Figure 2: Direct Mode Operation ................................................................................................... 50
Figure 3: Repeater Mode Operation ............................................................................................... 59
Figure 4: Call-Out Message ..........................................................................................................117
Page 12
12 | List of Figures
Page 13
List of Tables | 13
List of Tables
Table 1: Special Notations ..............................................................................................................17
Table 2: Product Technical Information .........................................................................................19
Table 3: Battery Icons .....................................................................................................................22
Table 4: Controls and Indicators .....................................................................................................23
Table 5: Display ..............................................................................................................................26
Table 6: Colors of the Soft Key Area ............................................................................................. 26
Table 7: Status Icons .......................................................................................................................27
Table 8: Talkgroup Icon ................................................................................................................. 34
Table 9: One-Touch Button Features ............................................................................................. 36
Table 10: During the Call ............................................................................................................... 38
Table 11: Text Entry Screen Icons ................................................................................................. 39
Table 12: Keys Usage .....................................................................................................................40
Table 13: Other Keys ......................................................................................................................41
Table 14: Different Location Displays ........................................................................................... 62
Table 15: Menu Icons ..................................................................................................................... 65
Table 16: Inbox Icons ..................................................................................................................... 69
Table 17: Outbox Icons .................................................................................................................. 71
Table 18: Contact Types .................................................................................................................74
Table 19: RMS Icons .................................................................................................................... 106
Table 20: Browser Keys Usage .................................................................................................... 111
Table 21: Browser Menu Panes ....................................................................................................112
Table 22: Additional Menu Panes ................................................................................................ 113
Table 23: Browser Text Input Icons ............................................................................................. 115
Table 24: Radio Tones ..................................................................................................................119
Table 25: LED Indications ............................................................................................................121
Table 26: Displayed Messages ..................................................................................................... 123
Page 14
14 | List of Tables
Page 15
Chapter
1
General Information
Safety Information
RF Energy Exposure and Product Safety Guide For Two-Way Radios
ATTENTION!
Before using this product, read the RF Energy Exposure and Safety Guide that ships with the radio which contains
important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable
standards and regulations.
Copyrights
The Motorola products described in this document may include copyrighted Motorola computer programs. Laws in
the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer
programs. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described
in this document may not be copied or reproduced in any manner without the express written permission of Motorola.
©
2014 Motorola Solutions, Inc. All Rights Reserved.
No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language
or computer language, in any form or by any means, without the prior written permission of Motorola Solutions, Inc.
Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication,
estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the
normal nonexclusive, royalty-free license to use that arises by operation of law in the sale of a product.
Disclaimer
Please note that certain features, facilities, and capabilities described in this document may not be applicable to or
licensed for use on a particular system, or may be dependent upon the characteristics of a particular mobile subscriber
unit or configuration of certain parameters. Please refer to your Motorola contact for further information.
Trademarks
MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property
of their respective owners.
Send Feedback
| |
Page 16
16 | General Information
European Union (EU) Waste of Electrical and Electronic Equipment (WEEE)
directive
The European Union's WEEE directive requires that products sold into EU countries must have the crossed out
trashbin label on the product (or the package in some cases).
As defined by the WEEE directive, this cross-out trashbin label means that customers and end-users in EU countries
should not dispose of electronic and electrical equipment or accessories in household waste.
Customers or end-users in EU countries should contact their local equipment supplier representative or service centre
for information about the waste collection system in their country.
Open Source Software (OSS) Legal Notices
For details on OSS Legal Notices visit Motorola Online (emeaonline.motorolasolutions.com) or browse the CPS Plus
disc.
Icon Conventions
The following graphic icons, which help identify situations or settings crucial to proper radio operation and user
safety, are used throughout this document:
Danger: The signal word DANGER with the associated safety icon indicates information that, if
disregarded, will result in death or serious injury.
Warning: The signal word WARNING with the associated safety icon indicates information that, if
disregarded, could result in death or serious injury, or serious product damage.
Caution: The signal word CAUTION with the associated safety icon indicates information that, if
disregarded, may result in minor or moderate injury, or serious product damage.
Caution: The signal word CAUTION may be used without the safety icon to state potential damage or
injury that is not related to the product.
Important: IMPORTANT statements contain information that is crucial to the discussion at hand, but is
not CAUTION or WARNING. There is no warning level associated with the IMPORTANT statement.
Note: NOTE contains information more important than the surrounding text, such as exceptions or
preconditions. They also refer the reader elsewhere for additional information, remind the reader how to
complete an action (when it is not part of the current procedure, for instance), or tell the reader where
something is located on the screen. There is no warning level associated with a note.
Suggestion: SUGGESTION indicates a recommendation from Motorola that does not require to be
followed, but might be helpful. There is no warning level associated with SUGGESTION.
Using this Guide
The following special notations are used throughout the text to highlight certain information or items:
Send Feedback | |
Page 17
General Information | 17
Table 1: Special Notations
Example Description
MENU key or EMERGENCY button Capital letters indicate a name of a key or button.
Entering TMO tone
Powering Off Bold words indicate the soft menu items, MMI strings, or
Setup → Tones → All Tones Bold words with the arrow between indicate navigation
Italic words indicate a name of the tone.
messages displayed on the radio.
structure in the menu items.
Feature and Service Availability
This guide describes all available radio features and services. Your service provider may have customized your radio
to optimize its use for your individual needs. Check with you service provider to find out the differences from this
guide.
| | Send Feedback
Page 18
Page 19
Chapter
2
Getting Started
This chapter contains basic information on how to use the radio.
Product Technical Information
Table 2: Product Technical Information
Description Value
Maximum Voltage
Maximum Current
Maximum RF Power
Maximum Speaker Load
Antenna Impedance
Operating Temperature Range
Operating Time Duty Cycle Class 4 (1 W) Class 3L (1.8 W, 380–
Note: The communication system determines the radio transmit and receive time (operating cycle time).
During overload, or beyond the systems specifications at high ambient temperatures, the thermal control
cuts down the RF power output, which reduces the radio coverage range.
4.2 V
0.5 A
1 or 1.8 W (switchable)
0.5 W at 8 Ω
50 Ω
-25 °C to +60 °C
05/05/90
05/35/60
Talk Time
> 23 h
> 17 h
3.5 h
430 MHz only)
> 20.5 h
> 15.5 h
2.5 h
Before Power On
Read this section before you power on your radio for the first time.
Attaching the Antenna
Procedure:
1 Insert the screw-in base of the antenna into the antenna terminal on the top of the radio.
Send Feedback
| |
Page 20
20 | Getting Started
2 Turn clockwise until snug.
Installing the Battery
Procedure:
1 Remove the battery from its protective case.
2 Insert the battery top into the compartment as illustrated.
3 Carefully press the battery bottom downward until it clicks into place.
Note:
• Your service provider can configure the radio to turn on automatically after you insert the battery.
• Your radio always powers up, if you remove the battery for a period shorter than 3-5 seconds.
Related Links
Removing the Battery on page 21
Send Feedback | |
Page 21
Removing the Battery
Prerequisites: Turn off the radio.
Procedure:
1 Push the latch.
2 Lift the battery out.
Getting Started | 21
Related Links
Installing the Battery on page 20
Charging the Battery
Depending on a charger type, you can charge a battery alone or/and a battery attached to a radio.
Charging a battery attached to a radio can be done with the radio either turned on or off. Charging with the radio
turned off is recommended since this is more efficient (the battery charges faster).
Important: Motorola approved chargers provide optimum performance. Other chargers may not fully
charge your Motorola Lithium-Ion battery or may reduce the life of the battery.
Prerequisites:
Do not charge the battery in a hazardous area.
Procedure:
1 Connect the charger to an appropriate power source (100–240 V, 12 V), according to the specification of the
charger.
2 Perform one of the following actions:
• Desktop chargers – insert the battery or the radio with the battery attached into the appropriate socket of the
charger. Ensure that the battery/radio made good connection with the charger and that the LED on the charger
is indicating that charging is in progress
• Travel chargers and car chargers – connect the charger to the radio with the battery attached. Ensure that the
charger is firmly connected to the radio and that the radio display is indicating that charging is in progress.
| | Send Feedback
Page 22
22 | Getting Started
Note: If the radio cannot detect the charger and displays the Detecting Charger or Reconnect Radio
to the Charger messages, ensure that the charger is connected correctly and that the pins on the radio
and the charger are clean.
Post requisites: The battery may heat up during charging. After charging, make sure that the battery and the radio are
within the operating temperature range before using the radio.
Charging Indicators
When your radio is turned on while charging, it displays an icon of the battery in charging.
When your radio is turned off while charging, it displays the icon of the battery in charging and backlights the
display.
Table 3: Battery Icons
Battery Capacity Battery Charge Progress
Empty
5%–10%
Low
10%–20%
Middle
20%–90%
Full
90%–100%
Empty
5%–10%
Low
10%–20%
Middle
20%–90%
Low Battery Indication
The radio indicates low battery level by playing an audible alert when the battery charge falls to a preset level. The
low battery alert can be programmed by your service provider to 5, 10, or 20 per cent of remaining capacity. The
default setting is 5 per cent. The service provider also configures how frequently the alert repeats.
Full
90%–100%
Send Feedback | |
Page 23
Controls and Indicators
4
6
7
8
9
10
11
5
4
3
2
1
19
17
6
18
20
21
22
14
15
16
13
12
Getting Started | 23
Table 4: Controls and Indicators
Annotation Description
1 EMERGENCY button
Table continued…
| | Send Feedback
Page 24
24 | Getting Started
Annotation Description
2 ROTARY KNOB
3 EARPIECE
4 SIDE button
Press and hold EMERGENCY button to enter Emergency operation. When your radio is off,
press and hold to power on in Emergency Mode.
• Rotate to set the volume.
• Press and rotate to select a different talkgroup.
• Press and hold the ROTARY KNOB to lock/unlock it. Powering off also unlocks a locked
ROTARY KNOB.
The ROTARY KNOB and SIDE buttons programming are paired. When the ROTARY KNOB is set
to Volume or Dual, the SIDE buttons support the One-Touch Button feature. By default, the
upper SIDE button is set to Backlight feature and the lower SIDE button is set to Screen Saver
feature.
Note: The required time to press and hold SIDE button to activate an One-Touch
Button feature is set as default to 0,1 second.
5 PTT (Push-To-Talk)
• Press and hold to talk in simplex calls or to initiate a group call, release it to listen.
• Press to send status and text messages.
6 SOFT key
Press left or right SOFT key, to select the option that appears on the screen directly above the
them.
7 SEND key
Press to initiate or answer duplex calls, or send messages.
8 SPEAKER
9 KEYPAD
Use the keypad to enter alphanumeric characters for dialing, contact entries, and text
messages.
Your radio supports the One-Touch Button feature that allows you to activate commonly
used features by pressing and holding assigned key (0-9, * and #).
Note: The required time to press and hold assigned key to activate an One-Touch
Button feature is set as default to 1 second.
10 SPEAKER CONTROL key
Press the SPEAKER CONTROL key to activate the earpiece Speaker LOW or speaker Speaker
HIGH.
11 ACCESSORY CONNECTOR
Send Feedback | |
Note: In an Emergency Group Call, the speaker is activated regardless of the
speaker setting.
Table continued…
Page 25
Annotation Description
Provides connection for accessories and cable for data transfer.
Note: It is recommended to turn off the radio before connecting accessories.
12 ANTENNA
13 LED
14 TOP MICROPHONE
Activated during Simplex, high audio calls such as Group Calls.
15 EXTERNAL ANTENNA CONNECTOR
Used with the digital car kit to connect the RF signal to the external antenna.
16 DISPLAY
Provides alphanumeric text and images within 65,536 colors and 130 x 130 pixels with
backlight, scalable fonts, and contrast.
Getting Started | 25
17 MENU key
• From the home screen, press to enter the main menu.
• Used to enter the context-sensitive menu.
18 ON/OFF/END/HOME key
• Press and hold to turn on/off your radio.
• Press to end calls.
• Press to return to the home screen.
19 AUDIO ACCESSORY CONNECTOR
Provides connection for audio accessories.
Note: It is recommended to turn off the radio before connecting accessories.
20 NAVIGATION key
Press up, down, left or right NAVIGATION key for list scrolling, while moving around the
menu hierarchy, or for alphanumeric text editing.
From the home screen, press to activate one of the following:
• down NAVIGATION key — enters Recent Calls menu item.
• up NAVIGATION key — changes My Groups talkgroup folder.
• left and right NAVIGATION key — toggles through the talkgroups.
21 BACKLIGHT SENSOR
Your radio keypad can be illuminated whenever the backlight is on. The keypad backlight
sensor determines whether there is a need to light up the keypad backlight, by measuring the
ambient light intensity. This feature can improve power saving. When the radio is in the
battery charger, the keypad backlight remains illuminated and the BACKLIGHT SENSOR is
ignored.
Table continued…
| | Send Feedback
Page 26
26 | Getting Started
Annotation Description
22 BOTTOM MICROPHONE
Note: A detailed list of compatible accessories is included in Accessory Leaflet, part number: 6866537D83.
To obtain the document, contact your service provider.
Display
This section presents the radio's default home screen elements.
Table 5: Display
Annotation Description
1 Status icon area
2 Text display area
3 SOFT key area
4 MENU/Context sensitive icon
The color of the SOFT key area changes according to the mode the radio is in.
Table 6: Colors of the SOFT Key Area
Color Mode or State
Light blue Normal TMO and DMO Modes
Light red Emergency Mode or Disaster Alert Call
Olive Local Site Trunking Mode
Yellow Call Out — Standby
Red Call Out — Alert
Green Call Out — Accepted
Blue Radio Messaging Service (RMS)
Grey Radio User Assignment (RUA) — Limited service
Send Feedback | |
Page 27
Getting Started | 27
Related Links
Display on page 87
Display on page 87
Setting Time and Date on the Display on page 89
Configurable Idle Screen
Your service provider can configure the information that is displayed on the home screen below the status icon area.
Depending on the radio configuration and services supported, the following information can be displayed:
• Network alias
• Range alias
• Talkgroup alias
• Time and date
• Home mode display
• RMS/FMS
• ISSI
• Radio status
• Audio profile name
• Radios supporting SIM Card End-to-End Encryption: OPTA, BSI registration status
Status Icons
Status icons appear when your radio is engaged in certain activities or when you have activated certain features.
The icons can appear in normal or large size. To manually enable/disable large status icons, go to Menu → Setup →
Display → Extended Status Icons.
Table 7: Status Icons
Icon Description
Trunked Mode Operation
In Service
No Service
Signal Strength – The more bars, the stronger the signal.
RF Power — Indicates the High RF Power is enabled. Shows the signal strength. The more
bars, the stronger the signal.
Migration — Displayed when your radio is registered to the foreign network.
Broadcast Call — Displayed when the radio is in the Broadcast Call.
Scan — Indicates talkgroup scanning is activated in the radio.
Priority Scan — Indicates that priority scanning is activated in the radio.
Table continued…
| | Send Feedback
Page 28
28 | Getting Started
Icon Description
Direct Mode Operation
or
Data Connected — Displayed when the data connection is idle (standby).
Data Transmit/Receive — Displayed when the data connection is active. Number 1, 2, 3, or
4 indicates how much bandwidth is used during transmission (25%, 50%, 75%, or 100%).
Direct Mode Call — Displayed when the radio is receiving a Direct Mode call. The more
bars, the stronger the signal.
High RF Power: idle or transmitting — Displayed when the High RF Power option is
enabled and the radio is either in the idle mode or transmitting a call.
High RF Power: receiving — Displayed when the High RF Power option is enabled and the
radio is receiving a call.
Direct Mode — Displayed when the radio is in Direct Mode (radio-to-radio
communication).
DMO Gateway Communication Mode — Indicates that gateway is selected. The icon has
the following states:
General Icons
• Solid — while the radio is synchronized with the gateway.
• Blinking — while the radio is not synchronized or during attachment.
• No icon — during a radio to radio and repeater call.
DMO Repeater Communication Mode — Displayed when the Repeater or GW + Rep
option in DMO Mode is selected. This icon has the following states:
• Solid — while the radio has detected the repeater (for example when the radio receives a
presence signal).
• Blinking — while the radio has not detected the repeater or during attachment.
• No icon — during a radio to radio and gateway call.
All Tones Off and Duplex and Simplex Ring Muted — Indicates that all alert tones are off
and both duplex an simplex ring volume is set to 0.
• Volume is set to 0 (when Volume Adj. Mode is set to Common).
• Both simplex and duplex ring volume is set to 0 (when Volume Adj. Mode is set to
Individual).
Simplex Ring Muted — Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.
Duplex Ring Muted — Indicates that duplex ring volume is set to 0 and simplex ring volume
is set to more than 0.
Send Feedback | |
Vibrate On — Indicates that the radio vibrates to alert you of an incoming call.
Vibrate then Ring — Indicates that the radio vibrates and rings to alert you of an incoming
call.
Low Audio — Indicates that the audio mode is changed to low.
Table continued…
Page 29
Icon Description
High Audio — Indicates that the audio mode is changed to high.
Audio Profile Selected — Indicates that an audio profile associated with a particular icon is
/ / /
/
active. The icons can be either solid or blinking. For details on audio profiles available on
the radio, contact your service provider.
Earpiece Connected — Indicates that the earpiece is connected.
GPS Icon
• Solid - the radio has a location fix
• Blinking - the radio is acquiring a location fix. This is an optional setting and may not be
enabled on your radio.
RUI Logged on — Indicates that you are logged on into the radio.
RUI Pseudo Log On — Indicates that you are in pseudo logged on state.
Getting Started | 29
RUI Packet Data — Indicates Pseudo Log On state when the Packet Data feature is activated
and active data session is in progress.
RUI Packet Data — Indicates Pseudo Log On state when the Packet Data feature is activated
and the external device sets up data connection with the radio.
Battery Strength — Shows the charge of your battery.
Battery Charging — Indicates that the battery is charging.
Emergency — Appears while the radio is in Emergency Operation.
Disaster Alert Call — Appears while the radio is in the Disaster Alert Call.
List Scrolling — Displayed to indicate that the ROTARY KNOB is in list scrolling mode.
New Message Has Arrived — Indicates a new message just arrived.
New Message(s) in Inbox — Indicates that you have unread messages in your Inbox.
Unread (New) WAP Message — Indicates that new page was loaded to the browser.
Call-Out — Indicates Call-Out alert.
Call-Out Alert Arrived — Indicates a receipt of a new Call-Out message.
Call-Out Alert Unread — Indicates unread alert in the CO Box.
Table continued…
| | Send Feedback
Page 30
30 | Getting Started
Icon Description
End-to-End Encryption (E2EE)
Solid, when the E2EE is enabled
• for the selected talkgroup,
• for the highlighted private number,
• for the manually entered private number,
• when transmitting voice in Group Calls,
• when transmitting voice in Simplex Private Calls.
Blinking, when the End-to-End Encryption is enabled
• when receiving voice in Group Calls,
• when receiving voice in Simplex Private Calls,
• during encrypted Duplex Private Calls.
SDS End-to-End Encryption
Solid, when the E2E status of an SDS message, or the E2E status of a message recipient
address.
In High Security mode, when your radio processes only the encrypted information, this
icon is always visible in when you are in the messages menu (for example, Inbox).
Unread (New) WAP Message — Indicates that you have not entered WAP Box since last
WAP message was received (Blinks when the priority is high).
WAP Message Icon — Displayed next to the priority in the message list view.
WAP Message Time — Displayed next to the create date in the message list view.
WAP Message Expiration — Displayed next to the expiry date in the message list view.
WAP Message Title Icon — Displayed next to the title along with the text in the message
list view.
Keys Locked — Indicates that keys are locked.
Non Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available when the radio:
• Is in the Local Site Trunking Mode.
• Attempts to connect to a gateway.
Not Secured Call — Air Encryption Unavailable
Alternately blinking, indicates that Air Encryption is not available when the radio:
• Is in TMO Mode.
• Communicates through a gateway.
Send Feedback | |
Not Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available in DMO Mode. The icon appears
after the PTT button is pressed.
Table continued…
Page 31
Icon Description
Remote Control
Indicates that the radio is being remotely controlled and some commands are being
executed in the background. For example, when the radio is controlled via special SDS
messages or triggered to send a GPS location report.
The icon is not visible in the Extra Zoom Mode.
Related Links
Air Encryption on page 78
Powering On the Radio
Procedure:
1 Press and hold ON button.
2 Your radio performs a self-check and registration routine.
3 After successful registration, your radio is in service.
Getting Started | 31
Note: Your radio powers on without visible and audible notification if Covert Mode is activated.
Unlocking Your Radio
Your radio may be locked at power up. To unlock it after powering on, enter the code at the prompt. Your radio enters
the default home display.
Note: The unlock code is originally set to 0000. Your service provider may change this number before you
receive your radio.
Related Links
PIN Protect on page 76
Changing PIN Codes on page 77
Writing Text on page 38
Unblocking Your Radio
Prerequisites: You blocked your radio by entering incorrect PIN code for three times (by default).
Procedure:
1 Radio displays Unit BlockedEnter PUK.
2 Enter 8–digit PUK (Personal Unblocking Key) number.
Note: The PUK is an eight-digit master code provided by your service provider.
3 Enter the new PIN code twice.
| | Send Feedback
Page 32
32 | Getting Started
Locking/Unlocking the Keys/Buttons
Press MENU key and * key.
Note: The EMERGENCY button is not locked. Entering Emergency Mode unlocks all keys.
Related Links
Keylock Setup on page 77
Holding Your Radio
The radio has two microphones: a top microphone for simplex dispatcher/private calls and a bottom microphone for
duplex telephone-like calls.
Also, the radio is equipped with an internal speaker for high audio (located at the middle of the unit) and an internal
earpiece for low audio (located at the top of the unit).The audio can be routed either to the speaker or the earpiece
using the Audio Toggle menu (MENU → Setup → Audio → Audio Toggle) or the assigned One-Touch Button.
Note: When possible, it is recommended to speak into the top microphone.
Simplex Calls
When using high audio, hold the radio a vertical position with its top microphone 5 centimeters to 10 centimeters
away from your mouth. Speak into the top microphone. Listen through the internal speaker. Keep the antenna at least
2.5 centimeters from your head and body.
Duplex Calls
When using low audio, hold your radio as you would a telephone. Speak into the bottom microphone. Listen via the
earpiece. Keep the antenna at least 2.5 centimeters from your head and body.
Lapel/Shoulder Use
For Group and Private Calls turn your head towards your shoulder/lapel, and speak directly into the top microphone.
Listen through the internal speaker.
Speakerphone Use
Place your radio 30 centimeters to 60 centimeters away from you. In a noisy environment, you move the radio closer
to you for better transmission.
Send Feedback | |
Page 33
Getting Started | 33
Setting Flip Display
When and where to use:
The feature is useful for a user who has to wear the radio on a shoulder, belt, or lapel and at the same time wishes to
read the display upside down.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Flip Display.
3 Select one of the following:
• On – to activate this feature.
• Off – to deactivate this feature.
Entering TMO / DMO Mode
Procedure:
1 From the home screen, press Optns.
2 Select Trunked Mode / Direct Mode.
Related Links
Selecting Network Operation Mode on page 101
Networks on page 101
Transmit Inhibit Mode
The Transmit Inhibit Mode is a mode in which the radio sends no radio transmissions. It is recommended to activate
the mode in RF sensitive areas, for example hospitals, airplanes, where safety can be jeopardized due to transmission
radiation.
To activate, select MENU → More . . . → Networks → TXI Mode → Activate.
In this mode, the radio does not transmit under any circumstances except for the Emergency Calls. All the functions
and keys which cause transmission, for example registration to the network, changing talkgroup or folder, sending
SDS messages, or pressing the PTT button are disabled. Any transmission trial causes the radio to display Not
Allowed In TXI Mode notification and to play a tone.
Your radio can still receive:
• Group calls.
• Messages — stored in the Inbox.
• Private call attempts — stored in the Missed Calls list, without the option to respond.
When no danger to safety exists anymore (for example, you leave the RF sensitive area), you can deactivate the
Transmit Inhibit Mode and the radio returns to standard operation.
You can deactivate the mode by selecting MENU → More . . . → Networks → TXI Mode → Deactivate, pressing
One-Touch button, or implicitly when initiating an Emergency Call.
| | Send Feedback
Page 34
34 | Getting Started
Note: RF Transmissions from the radio are prevented under the following conditions:
• TXI Mode is activated.
• Battery is removed.
• The radio is turned off.
On entering or exiting the transmit inhibit mode, when the radio is camped on a cell, it sends a specially designated
SDS status message. This SDS message indicates to the SwMI that the radio is entering or exiting transmit inhibit
mode.
Mobility procedures that do not require the radio to send an uplink transmission are performed except for cell
reselection.
In transmit inhibit mode the radio joins group calls for any group that the radio is monitoring, but the transmitting on
that call is still prohibited.
The radio also displays any incoming SDS messages to the user. The missed call feature is active in the transmit
inhibit mode and allows checking what calls were missed. However, the radio attempts to prevent call setup
retransmission from being recorded as separate calls.
If you initiate an emergency call, the radio immediately leaves transmit inhibit mode and attempts to start the
emergency call if the radio is in service.
If the radio is turned off in the transmit inhibit mode, on turning on the radio asks whether to exit the transmit inhibit
mode. If you choose No, the radio turns off.
Selecting Talkgroups
From the home screen, use one of the following methods:
• Press left or right NAVIGATION key. Press Select to confirm.
• Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
• Select Optns → TG by Folder. Select a folder and then a talkgroup name.
• Press ROTARY KNOB and rotate it until the required talkgroup name is displayed. Press Select to confirm.
Note: If the ROTARY KNOB mode is set to Scroll, then you do not need to press it to enter the scrolling
mode.
Note: Your radio can have an access up to three levels of the folder structure.
Talkgroup Icon Selection
Table 8: Talkgroup Icon
Icon Description
Displayed when the talkgroup is from a different network than the one currently selected.
Send Feedback | |
Page 35
Getting Started | 35
Using Timed Talkgroup Change
This feature allows you to switch a selected talkgroup between the currently selected talkgroup and a predefined
talkgroup (TMO or DMO), making the predefined talkgroup the selected talk group for a predefined time by using a
One-Touch button. After the timer expires, your radio returns to the previously selected talkgroup.
Prerequisites: Timed Talkgroup Change is assigned to a One-Touch button.
Procedure:
1 Press and hold and hold the One-Touch button.
2 Your radio switches the selected talkgroup to the predefined talkgroup for a predefined amount of time.
During the predefined time the radio initiates or joins group communication (SDS, status SDS, or call) on the
predefined talkgroup as the selected talkgroup.
Your service provider can assign a function to the second press of the One-Touch button to:
• Return to previously selected talkgroup
• Restart the predefined time
• No action
3 When the timer expires (potentially after being restarted a number of times) the radio switches to the previously
selected talkgroup.
Activating Talkgroup Scanning
When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Group Setup → Scan → Scanning.
3 Select Select List and then a list name.
Your radio displays list name Selected.
4 Select Scanning → On.
Your radio is scanning on the predefined scan list.
Related Links
Scan on page 94
Broadcast Call
The Broadcast Group Call (also called Site Wide Call) is a high-priority group call from the console operator (or
dispatcher) to all users located at one or more sites. The radios are configured to monitor a Broadcast Call, but you
cannot talk back. The call can be received as a normal Broadcast Call or an Emergency Broadcast Call. The Broadcast
Call preempts an ongoing Group Call that has the same or lower call priority.
| | Send Feedback
Page 36
36 | Getting Started
Ambience Listening (AL) Call
This feature allows a dispatcher to make a special call that allows listening to the conversations and background
noises within the range of a particular radio’s microphone. The call is set up without any indication to the affected
radio, and any lower priority ongoing voice call may be preempted.
After accepting the call, the radio transmits in a simplex call without any action from or indication to the user. The
Ambience Listening Call automatically ends when you initiate any voice call, switch to Emergency or TXI Mode, or
send Emergency Alarm.
One-Touch Button Feature
The One-Touch Button feature allows for quick activation of functions by pressing and holding keys or buttons
assigned to those functions.
Table 9: One-Touch Button Features
Feature Description
Backlight Toggle Toggles the backlight settings.
Change Audio Profile Change to the specific audio profile.
Change Talkgroup Changes the talkgroup to the programmed one by your service
provider.
Covert Mode Turns on/off the Covert Mode.
Display Time Displays universal time on the home screen.
Double Push PTT Sends the D- PTT tone to the currently used talkgroup.
Enable/Disable Howling Suppression Turns on/off Howling Suppression.
Extra Zoom On/Off Turns on/off Extra Zoom.
Flip Display Rotates the display by 180 degrees.
GPS Report Sends a message with the radio’s GPS location to a dedicated
address.
Hi/Low Audio Toggles high/low audio.
Initiate Call-Out Fallback Alert Sends Call-Out Fallback Alert.
PABX Call Initiates a PABX call to a predefined entry in the contact list.
Phone Call Initiates a phone call to a predefined entry in the contact list.
Previous Talkgroup Changes the selected talkgroup of the radio to the talkgroup (DMO or
TMO) that was selected previously.
Private Call Initiates a private call (simplex or duplex) to a predefined entry in the
contact list or to the last group call originator.
Rotary Switches Lock/Unlock Locks/unlocks the Rotary Switches.
RUA/RUI Log On/Off Asks for the credential or logs off the radio.
Table continued…
Send Feedback | |
Page 37
Getting Started | 37
Feature Description
Screen Saver Activation Turns on/off the Screen Saver feature.
Scroll Audio Profiles Scrolls through all available audio profiles.
Sending Predefined Message Sends a predefined message to a dedicated address.
Sending Status Sends a dedicated status message to a dedicated address.
Sending User Defined Message Sends a user defined message to a dedicated address.
Speaker Enable/Disable Per Call Enables the loudspeaker for a duration of the ongoing call..
Timed Talkgroup Change Makes a predefined talkgroup the selected talk group for a specified
amount of time. While using the predefined talkgroup, the second
press of the One-Touch Button results in: returning to the previously
selected talkgroup, restarting the predefined time, or no action
(depending on configuration). After the timer expires, the radio
returns to the previously selected talkgroup.
TMO / DMO Switch Toggles between TMO and DMO modes.
TMO Talkgroup Scan Turns on/off the Talkgroup Scan feature in TMO Mode.
Toggle RF Power Class Toggles the RF Power Class between High and Normal.
Transmit Inhibit Mode (TXI) Turns on/off the Transmit Inhibit Mode.
Turn On/Off Repeater Mode Turns on/off the Repeater Mode.
Volume Down
Volume Up
Your service provider can assign one-touch functions only to the side buttons and keypad keys.
Note: If the One-Touch Button feature is enabled, the One-Touch Dial is disabled. If no feature is assigned
to a button, your radio displays an Unassigned Button message.
• Press to decrease the volume by one level.
• Press and hold to continuously decrease the volume to its
minimum level.
• Press to increase the volume by one level.
• Press and hold to continuously increase the volume to its
maximum level.
Terminal Temporary Disable/Enable
Your radio is provided with a feature that allows your service provider to disable it temporarily in case it is stolen.
When your radio is disabled or is powered up in disabled state, it looks and acts like it is turned off.
If your radio is found, your service provider can enable it again over the air. After your radio is enabled, you may
resume normal operation.
Terminal Permanent Disable
Your radio is provided with a feature that allows your service provider to disable it permanently in case it is stolen or
lost. When your radio is disabled permanently, it becomes inoperable. After a Permanent Disable your service
| | Send Feedback
Page 38
38 | Getting Started
provider cannot enable your radio. It is recommended to Permanent Disable your radio only when you do not expect
to recover it. If it is recovered then a Permanent Disable radio can be reactivated by returning it to Motorola.
Note: This is a selling feature.
High/Low Audio Toggle
The user is able to switch from the external earpiece to the main speaker using SPEAKER CONTROL key and is not
required to disconnect the external earpiece or PHF.
The states of the routed audio are:
• Speaker HIGH — indicates that audio is routed to the main speaker.
• Speaker LOW — indicates that audio is routed to the earpiece or PHF earpiece, and not to the main speaker.
Using High Audio
When and where to use: Use it when placing and receiving a Group, Phone and Private calls.
Procedure:
1 Hold your radio in a vertical position with its top microphone 5–10 centimeters away from your mouth.
2 Speak into the top microphone and listen through the internal speaker.
Keep the antenna at least 2,5 centimeters from your head and body.
Using Low Audio
When and where to use: Use it when placing and receiving a Phone, PABX, and Duplex Private calls.
Procedure:
1 Hold your radio as you would a telephone.
2 Speak into the bottom microphone and listen through the earpiece.
Keep the antenna at least 2,5 centimeters from your head and body.
During the Call
During the call, label of the right SOFT key indicates the next possible change. Accessory default setup is:
Table 10: During the Call
Soft Key Label Audio Setting
Spkr Audio goes to the main speaker (Speaker HIGH is displayed)
Erpce Audio goes to the earpiece (Speaker LOW is displayed)
PHF Audio goes to the Personal Hands Free (Speaker LOW is displayed)
Writing Text
Every time that you see text entry screen, refer to this section.
Send Feedback | |
Page 39
Related Links
Unlocking Your Radio on page 31
Selecting Text Entry Modes
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENU → Entry Mode.
2 Select one of the following:
• Primary — for entering alphanumeric characters.
• Numeric — for entering numbers only.
• Symbol — for entering symbols only.
• Secondary — for entering alphanumeric characters (this mode is optional and you have to add it to the list). It
is convenient when you use one language, and sometimes wish to switch to another one.
Note: In the text entry screen, you can also press # key repeatedly to toggle through the entry modes.
Getting Started | 39
Selecting Text Entry Methods and Languages
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENU → Entry Setup.
2 Select one of the following:
• TAP — Enter letters, numbers, and symbols by pressing an alphanumeric key one or more times.
• iTAP — Let the radio predict each word as you press an alphanumeric key.
Note: You can use these methods in the languages programmed in the radio.
Text Entry Icons
In the text entry screen, icons tell you which text entry mode and method you are using. A character counter displayed
on the text entry icon, indicates the amount of characters that can be entered.
Press the # key to toggle through the text entry modes.
Table 11: Text Entry Screen Icons
Primary Icon Secondary Icons Description
TAP — no capitals
TAP — capitalise first letter only
TAP — all capitals
iTAP — no capitals
iTap — capitalise first letter only
Table continued…
| | Send Feedback
Page 40
40 | Getting Started
Primary Icon Secondary Icons Description
Numeric Icon Description
Enter numbers.
Symbolic Icon Description
Enter punctuation and symbols.
Keys Usage
List of keys and characters in Alphanumeric Mode (TAP/iTAP).
Table 12: Keys Usage
iTap — all capitals
Key Alphanumeric Mode (TAP/iTAP) Symbol Mode
0 to 9 keys Numeric Mode:
• Press to enter digit at insertion point.
• Press and hold any numeric key to enter TAP
alphanumeric mode.
• To exit TAP alphanumeric mode, press and hold
any numeric key.
0 key Press to cycle through single shift, caps lock, and
lower case.
1 key . , ? ! 0 1 @ ’ ” - ( ) / : _ ; + & % × * = < > € £ $ ¥ ¤ [ ] { } \ ~ ^ ¿ ¡ § #
2 key
3 key
4 key
5 key
A B C 2
a b c 2
D E F 3
d e f 3
G H I 4
g h i 4
J K L 5
+ - × * / \ [ ] = < > § #
@ _ \
/ , ;
” & ’
( ) [ ] { }
6 key
7 key
Send Feedback | |
j k l 5
M N O 6
m n o 6
P Q R S 7
p q r s 7
¿ ¡ ~
= < >
Table continued…
Page 41
Getting Started | 41
Key Alphanumeric Mode (TAP/iTAP) Symbol Mode
8 key
9 key
Table 13: Other Keys
Key Description
Any numeric key
* key
# key
T U V 8
t u v 8
W X Y Z 9
w x y z 9
• In TAP press any key to reject word completion and continue with text entry A new
completion will be displayed, if available, after the time-out for TAP expires.
• Press and hold to enter Numeric mode from TAP or iTAP alphanumeric.
• Press to insert a space.
• In TAP press to dismiss a word completion and insert a space.
• Enter a newly created word into the user dictionary.
• Press and hold to enter a carriage return.
• Press once to cycle through all entry modes (Symbol, Numeric, Primary, and
Secondary (if configured).
• Press and hold to return to the default entry mode.
€ £ $ ¥ ¤
# % *
Select Press to select the highlighted choice and place it in the main text area.
Delete
Up NAVIGATION key
Down NAVIGATION key
Left NAVIGATION key
Right NAVIGATION key
MENU If a context-sensitive menu is active, opens the Context Sensitive Menu.
• Press once to delete the last entered character.
• Press and hold to clear the entire main text area.
• In TAP press to reject word completion and scroll up.
• In TAP press to change previously entered small letter to capital.
• In TAP press to reject word completion and scroll within the text area.
• In TAP press to change previously entered capital letter to small.
• Press to navigate to the left. Press and hold to repeat.
• In TAP, if a word completion is available, press to reject the completion.
• Press to navigate to the right. Press and hold to repeat.
• In TAP if a word completion is available, press to accept the word.
Writing in iTAP Alphanumeric
Prerequisites: Your radio displays the text entry screen.
When and where to use: It allows you to write quicker. For example, try to write David 232!
Procedure:
1 Press MENU → Entry Setup → Prim..
2 Select iTAPEnglish and press Back.
| | Send Feedback
Page 42
42 | Getting Started
3 Press MENU → Entry Mode.
4 Select Primary.
5 Press 3 key.
The alternative row opens and shows D E F 3.
6 Continue entering the letters by pressing one key for each letter. Press 2, 8, 4, and 3 keys.
Note: Automatic shift to upper case is used at the beginning of a message, after punctuation followed
by space, or for the first letter of a word created as a new contact entry.
The alternative row highlights David.
7 Press * key.
8 Press 2 key and scroll the alternative row by pressing right NAVIGATION key to reach 2.
It automatically changes the entry mode to Numeric.
9 Press 3 and 2 keys.
10 Press and hold 1 key until 0 at the end changes to ..
The alternative row highlights 232..
11 Scroll the alternative row by pressing the right NAVIGATION key to reach the required symbol.
12 Press Select.
You have entered David 232!.
Writing in TAP Alphanumeric
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENU → Entry Setup → Seco..
2 Select TAPEnglish and press Back.
3 Press MENU → Entry Mode.
4 Select Secondary.
5 Press the key labeled with the desired character, once for the first character, twice for the second, and so on.
Example:
To enter letter s, press 7 key four times. To enter number 7, press the 7 key five times. If you do not
press a key for a few seconds, the character is accepted, and the cursor moves to the next position.
Word Locking
Prerequisites: Your radio displays the text entry screen.
When and where to use: To add the words that are not in the dictionary.
Procedure:
1 Press MENU → Entry Setup.
2 Select iTAPEnglish.
3 Try to enter the word. Scroll the alternate line for a word option. Each option is successively highlighted and
partially locked.
4 Enter the second part of the word. The first part remains unchanged (locked). The newly entered letters are
highlighted and then locked while you scroll to the next word option.
5 Press * key. The word is placed in the text area with a space and automatically added to the dictionary.
Send Feedback | |
Page 43
Getting Started | 43
Adding Words to the Dictionary
Each language comes with its own dictionary. You can create words (including alphanumeric abbreviations). Once
you enter a word followed by space, it is automatically stored in the dictionary and appears as a choice whenever you
press the same key combination in the future.
Home Display Text Message
Your radio is provided with a feature that allows your service provider to send special text messages to the display.
The message stays on the home screen until a new message is received. Power cycle your radio to replace the Home
Display message to the predefined one.
| | Send Feedback
Page 44
Page 45
Chapter
3
Modes
This chapter contains information on available modes that the radio can operate in.
Using Networks
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Networks.
3 Select one of the following:
• Trunked Mode
• Direct Mode
• TXI Mode
Your radio switches to the selected mode.
Trunked Mode Operation
Trunked Mode Operation requires the switching and management infrastructure. This operation mode enables various
voice and data communication types (for example, group calls, short data service messages) and access to the
infrastructure-related features (for example, packet data).
Figure 1: Trunked Mode Operation
Send Feedback
| |
Page 46
46 | Modes
Entering TMO Mode
Procedure:
1 From the home screen, press Optns.
2 Select Trunked Mode.
Selecting Talkgroups
From the home screen, use one of the following methods:
• Press left or right NAVIGATION key. Press Select to confirm.
• Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
• Select Optns → TG by Folder. Select a folder and then a talkgroup name.
• Press ROTARY KNOB and rotate it until the required talkgroup name is displayed. Press Select to confirm.
Note: If the ROTARY KNOB mode is set to Scroll, then you do not need to press it to enter the scrolling
mode.
Note: Your radio can have an access up to three levels of the folder structure.
Making Group Calls in TMO
The Group Call is received by all members of the selected group who have their units turned on and are in range.
Procedure:
1 Press and hold the PTT button.
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to
listen.
Note: To cancel making a group call, do one the following actions before the talk permit is granted
(depending on your service provider’s settings):
• Release the PTT button.
• Press the END key (default).
When the call is canceled, your radio displays Call Cancelled message (if configured by your service
provider).
Receiving Group Calls in Idle
Procedure:
1 The radio receives a Group Call.
Note: The incoming Group Call is signalled by a Receiving Group Call tone.
2 To respond, press and hold the PTT button.
Receiving Group Calls during Ongoing Group Calls
While in active Group Call, your radio receives a Group Call with a higher priority.
One of the following occurs:
• Your radio is forced to end the current group call and automatically join the incoming one.
• Your radio displays incoming group call screen with options:
• Join — ends current Group Call and starts the incoming one.
Send Feedback | |
Page 47
• End — cancels the incoming Group Call.
Dynamic Group Number Assignment (DGNA)
DGNA allows the network operator to dynamically manage talkgroups on your radio over the air interface. Using
DGNA, the network operator can:
• Add talkgroups.
• Attach or select newly added talkgroups.
• Delete talkgroups.
• Modify parameters of existing talkgroups.
All the above operations are performed by transmitting data to your radio.
DGNA Reception
When a DGNA message is received, your radio plays a tone and displays a message Talkgroup list updated. If
enabled by your service provider, your radio displays all added and deleted talkgroup list.
When your service provider deletes (de-assigns) the currently selected talkgroup, depending on the settings, the radio
can perform one of the following actions:
Modes | 47
• Enter the “No Group” state – the radio does not attach to any talkgroup automatically.
• Attach to the last selected TMO talkgroup. If the last selected TMO talkgroup is not available (it was deleted), the
radio enters the “No Group” state.
• Attach to a default talkgroup configured by your service provider. If the default talkgroup is not available (it was
deleted), the radio enters the “No Group” state.
At each talkgroup change, an appropriate notification is shown on the display.
If the DGNA message is received to delete all talkgroups, your radio displays All Talkgroups Deleted. To exit the
DGNA display, you can use the BackSOFT key or the END key.
DGNA Auto Select Group
If the DGNA Auto Select is configured, whenever your radio receives a DGNA, it switches to the added talkgroup.
DGNA Auto Reselect Group
If the DGNA Auto Reselect is configured, whenever a talkgroup assigned by the network operator via DGNA is
deassigned without the user action, the radio returns to the previously selected group.
Viewing DGNA Talkgroups
Prerequisites: Your radio receives the DGNA message.
Procedure:
1 To view the added talkgroups details press View.
2 Scroll through the list to select required talkgroup.
3 To select the DGNA group, press Attach.
Broadcast Calls Initiated by Users
This feature allows you to make a Broadcast Call from the radio that is initiated on the predefined talkgroup. Your
service provider predefines the alias and the priority of the Broadcast Call.
Note: If the type of the encryption is defined by the SIM Card, the Broadcast Call is always clear.
Otherwise if the radio uses other encryption service the type of the encryption used for that Call is up to the
encryption settings of that service.
| | Send Feedback
Page 48
48 | Modes
Note: This feature is not supported on the Dimetra infrastructure.
Initializing Broadcast Calls
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Services → Broadcast.
Your radio displays the predefined alias and the Broadcast Call icon.
3 To start the call press the PTT button.
Phone and PABX Calls
The Phone Call allows you to call a landline telephone number or a cellular mobile phone number. The Private
Automatic Branch Exchange (PABX) Call allows you to call local (office) extension numbers.
Private Call
The Private Call, also called point-to-point, or individual call, enables calling between two individuals. No other radio
can hear the conversation. This call type can be carried out in two ways:
• Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time.
• Simplex call, in TMO or DMO Mode. Only one party can speak at a time.
When a DMO Private Call takes place, radios not involved in this call receive the channel busy indication. The radios
are identified using its radio numbers.
Related Links
Emergency Individual Calls (Private or MS-ISDN) on page 56
Making Private Calls
Procedure:
1 From the home screen, enter a number.
2 If Private is not the first type of call presented, press Ctype repeatedly to select it.
3 When you are in the following mode:
a TMO — For simplex calls, press and release the PTT button. You hear a ringing tone. Otherwise, press and
hold the PTT button. Wait for the talk permit tone before talking, and release the PTT button to listen. For
duplex calls, press and release the SEND key. You hear a ringing tone.
b DMO — Only simplex calls are available. Press and hold the PTT button. Wait for the talk permit tone before
talking, and release the PTT button to listen.
4 To end the call, press the END key.
Assistance Call
This feature allows you make a private call to ask for assistance during normal and non-critical situations.
Note: Your service provider can configure the number, priority, and the type of the call (simplex or
duplex).
You can start an Assistance Call in one of the following way:
• Dial a predefined number and press SEND key.
• Menu → More . . . → Services → Assistance Call
Send Feedback | |
Page 49
Call Modification
Call Modification is a feature that allows your service provider to modify the call in order to optimize it and adjust to
a current situation.
Modification can cover:
• Call priority — modified during call setup.
• Call type — modified during call setup.
• Call encryption — modified during an ongoing call (but not in the transmission phase).
When the call is modified, your radio displays Call Modified message.
When a recently modified call requires the PTT button to transmit, your radio displays Call ModifiedUse PTT.
All modifications are made by your service provider and the radio only follows them. You have no influence on
ongoing call modifications.
When call priority is changed to emergency:
• The display indicates that an Emergency Group Call has been received.
• The radio plays a special audio alert.
Note: If a Group Call is modified into an Emergency Group Call, no emergency related features are
triggered.
Modes | 49
If call modification requested by your service provider cannot be followed by the radio (due to its settings), the radio
rejects it and displays Service Not Available message.
Local Site Trunking
This mode is also called as Fallback Mode and it allows more than one radio from the same site to communicate when
the link between the site and the network central controller fails. Entering and exiting Local Site Trunking (that is,
returning to System Wide Services) is done automatically. In this mode some services are unavailable.
Note: Your service provider can disable this mode.
Entering Local Site Trunking
When your radio receives a Local Site Trunking indication from the system, the following occurs:
• Your radio plays an Entering Local Site Trunking tone.
• Display shows the Local Area Service message.
• Display icons and soft keys turn olive.
Note: Noticeable only on the color display.
• Any call in progress is dropped upon entering Local Site Trunking Mode.
If configured by your service provider, this message/alert is periodically repeated to remind you that your radio is still
operating in Local Site Trunking Mode. The following features are available:
• Registration
• Attachment
• Group Call
• Emergency Call
• Emergency Alarm
| | Send Feedback
Page 50
50 | Modes
Note: Your service provider can turn on/off all the visual and audio indications, when you enter Local Site
Trunking Mode.
Exiting Local Site Trunking
When the link with the central network controller is reestablished, your radio exits Local Site Trunking, and the
following occurs:
• Your radio plays an Exiting Local Site Trunking tone.
• Any call in progress during Local Site Trunking is dropped.
• Display icons and soft keys turn blue.
Note: Your service provider can turn on/off all the visual and audio indications, when you exit Local Site
Trunking Mode.
Direct Mode Operation
Direct Mode Operation is a mode of simplex operation where radios communicate directly.
Figure 2: Direct Mode Operation
Entering DMO Mode
To enter the DMO Mode:
• From the home screen, press the MENU key. Select More . . . → Networks → Direct Mode.
• From the home screen, select Optns → Direct Mode.
Selecting Talkgroups
From the home screen, use one of the following methods:
• Press left or right NAVIGATION key. Press Select to confirm.
• Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
• Select Optns → TG by Folder. Select a folder and then a talkgroup name.
• Press ROTARY KNOB and rotate it until the required talkgroup name is displayed. Press Select to confirm.
Send Feedback | |
Page 51
Note: If the ROTARY KNOB mode is set to Scroll, then you do not need to press it to enter the scrolling
mode.
Note: Your radio can have an access up to three levels of the folder structure.
Making Group Calls in DMO
The Group Call is received by all members of the selected group who have their units turned on and are in range.
Procedure:
1 Press and hold the PTT button.
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to
listen.
Receiving Group Calls in Idle
Procedure:
1 The radio receives a Group Call.
Note: The incoming Group Call is signalled by a Receiving Group Call tone.
Modes | 51
2 To respond, press and hold the PTT button.
Private Call
The Private Call, also called point-to-point, or individual call, enables calling between two individuals. No other radio
can hear the conversation. This call type can be carried out in two ways:
• Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time.
• Simplex call, in TMO or DMO Mode. Only one party can speak at a time.
When a DMO Private Call takes place, radios not involved in this call receive the channel busy indication. The radios
are identified using its radio numbers.
Related Links
Emergency Individual Calls (Private or MS-ISDN) on page 56
Making Private Calls
Procedure:
1 From the home screen, enter a number.
2 If Private is not the first type of call presented, press Ctype repeatedly to select it.
3 When you are in the following mode:
a TMO — For simplex calls, press and release the PTT button. You hear a ringing tone. Otherwise, press and
hold the PTT button. Wait for the talk permit tone before talking, and release the PTT button to listen. For
duplex calls, press and release the SEND key. You hear a ringing tone.
b DMO — Only simplex calls are available. Press and hold the PTT button. Wait for the talk permit tone before
talking, and release the PTT button to listen.
4 To end the call, press the END key.
| | Send Feedback
Page 52
DMODMO
52 | Modes
Private Call With Presence Check
This feature allows you to see if the calling party is available in DMO. When this feature is enabled, you can only
initiate a Private Call if the called radio is present on the same channel and responds with a presence check
acknowledgement.
Otherwise your radio displays Party Not Available.
Talkgroup for Individual Calls
Talkgroup for Individual Calls is a talkgroup that operates on a separate frequency allocated for individual (private)
calls only. Using this talkgroup optimizes frequency resources and helps not to block other talkgroups. The only
supported call types are: private calls and emergency calls (both private and group). Use this talkgroup each time you
need to make a private call.
When you select a Talkgroup for Individual Calls, your radio is not able to receive or initiate any group or broadcast
calls with priority lower than Emergency.
When you have selected a Talkgroup for Individual Calls and press the PTT button to start a Group Call, the radio:
• Rejects the call
• Plays a tone
• Displays the Individual Calls Only message
Communication through Repeaters
Radios that are out of range and cannot communicate directly one with another in DMO Mode can do it through the
repeater. The repeater is a radio that repeats all communication on a chosen channel, and as a result increases radios’
DMO range.
When the radio connects to a repeater, it plays a tone, displays the Repeater available message, and shows an
appropriate icon. When the radio looses connection with the repeater, it plays a tone, displays the Repeater not
available message, and the repeater icon is blinking.
Communication through Gateways
Gateway provides connectivity between radios operating in DMO Mode and the TETRA network, so that the DMO
radios can communicate with the TMO radios.
Send Feedback | |
Page 53
DMO
TMO
TMO
Modes | 53
When the radio connects to a gateway, it plays a tone, displays the Gateway available message and shows an
appropriate icon. When the radio looses connection with the gateway, it plays a tone, displays the Gateway not
available message, and the gateway icon is blinking.
Selecting DMO Group Call Options
When and where to use: Helps to communicate with other radio users on the same talkgroup through the Gateway or
Repeater.
Procedure:
1 From the home screen, press Optns.
2 Press Config.
3 Select one of the following:
• MS - MS — Your radio can communicate only with other radios within its range.
• Gateway — Your radio uses a gateway to communicate with the infrastructure.
• Automatic — Your radio uses the first available gateway for that talkgroup.
• Specific — Your radio uses only the Gateway with the specified Gateway address for that talkgroup. If
your radio displays Selected Gateway:None, press Edit to enter the current gateway address.
• Repeater — Uses the first available repeater for that talkgroup.
• GW + Rep — Uses the first available gateway or repeater for that talkgroup.
• Automatic — Uses the first available gateway for that talkgroup.
• Specific — Uses only the Gateway with the specified Gateway address for that talkgroup. If your radio
displays Selected Gateway:None, press Edit to enter the current Gateway address.
Note: When the Gateway and the Repeater cannot be communicated even though a talkgroup to use
them is configured, the radio attempts the direct MS-MS communication.
When your radio detects the appropriate Gateway and/or the Repeater, the Gateway and/or Repeater icons turns solid,
respectively.
Transmit Inhibit Mode
The Transmit Inhibit Mode is a mode in which the radio sends no radio transmissions. It is recommended to activate
the mode in RF sensitive areas, for example hospitals, airplanes, where safety can be jeopardized due to transmission
radiation.
| | Send Feedback
Page 54
54 | Modes
To activate, select MENU → More . . . → Networks → TXI Mode → Activate.
In this mode, the radio does not transmit under any circumstances except for the Emergency Calls. All the functions
and keys which cause transmission, for example registration to the network, changing talkgroup or folder, sending
SDS messages, or pressing the PTT button are disabled. Any transmission trial causes the radio to display Not
Allowed In TXI Mode notification and to play a tone.
Your radio can still receive:
• Group calls.
• Messages — stored in the Inbox.
• Private call attempts — stored in the Missed Calls list, without the option to respond.
When no danger to safety exists anymore (for example, you leave the RF sensitive area), you can deactivate the
Transmit Inhibit Mode and the radio returns to standard operation.
You can deactivate the mode by selecting MENU → More . . . → Networks → TXI Mode → Deactivate, pressing
One-Touch button, or implicitly when initiating an Emergency Call.
Note: RF Transmissions from the radio are prevented under the following conditions:
• TXI Mode is activated.
• Battery is removed.
• The radio is turned off.
On entering or exiting the transmit inhibit mode, when the radio is camped on a cell, it sends a specially designated
SDS status message. This SDS message indicates to the SwMI that the radio is entering or exiting transmit inhibit
mode.
Mobility procedures that do not require the radio to send an uplink transmission are performed except for cell
reselection.
In transmit inhibit mode the radio joins group calls for any group that the radio is monitoring, but the transmitting on
that call is still prohibited.
The radio also displays any incoming SDS messages to the user. The missed call feature is active in the transmit
inhibit mode and allows checking what calls were missed. However, the radio attempts to prevent call setup
retransmission from being recorded as separate calls.
If you initiate an emergency call, the radio immediately leaves transmit inhibit mode and attempts to start the
emergency call if the radio is in service.
If the radio is turned off in the transmit inhibit mode, on turning on the radio asks whether to exit the transmit inhibit
mode. If you choose No, the radio turns off.
Emergency Operations
Emergency Operations are used in critical situations.
Pressing and holding the EMERGENCY button, or entering the Emergency Number and pressing the SEND key,
activates one or more services (depending on your service provider settings):
• Emergency Alarm
• SDS Status
• Silent Emergency
• Hot Microphone operation
• Emergency Individual Call (Private or MS-ISDN)
• GPS location information
Send Feedback | |
Page 55
Note: It is possible to turn on the radio by pressing the EMERGENCY button. Depending on the service
provider settings, the radio can start Emergency Operations automatically. If the radio is PIN-protected
(except for SIM PIN), Emergency Operations will bypass the PIN lock for the duration of the Emergency
Operations.
When starting Emergency Operations, any ongoing voice call is aborted or cleared down, and any packet data transfer
in progress is aborted. However, the session is kept open.
During Emergency Operations, the radio rejects phone, PABX, and private calls, and does not monitor the talkgroups
in the selected scan list.
To terminate Emergency Operations, press the rightSOFT key.
Emergency Group Call
The Emergency Group Call has the highest communication priority that means it is the pre-emptive kind of call.
Emergency Group Call is available in both TMO and DMO. During Emergency Operations, Emergency Group Call
can be started by pressing pressing the EMERGENCY button. The radio can also support Hot Microphone operation,
which allows the Emergency Call to be conducted without pressing the PTT button.
If the radio receives an incoming group call with emergency priority, the display shows that an emergency call has
been received, and a special audio alert is played.
Modes | 55
An emergency group call can be configured as:
• A non-tactical call – initiated on a talkgroup preprogrammed by your service provider. When in non-tactical
emergency mode, you cannot switch talkgroups.
• A tactical call – initiated on the currently selected talkgroup.
In TMO, if the radio enters Emergency Operations while the Emergency Broadcast Call is active, the radio continues
on the call without initiating any calls and sends the Emergency Alarm.
When the Emergency Group Call you participate in terminates, your radio can behave in several ways, depending on
your service provider settings:
• If you are the call initiator, the radio can either stay in the Emergency Mode, or return to TMO.
• If you are not the call initiator, the radio always returns to TMO.
Making Emergency Group Calls
Prerequisites: Ensure that your radio is in Emergency Mode.
Procedure:
1 Press and hold the PTT button.
2 Wait for the talk permit tone (if configured) and talk.
3 Release the PTT button to listen.
Note: It is possible to cancel making an emergency group call in TMO. To do this, perform one of the
following actions before the talk permit is granted (depending on your service provider settings):
• Release the PTT button.
• Press the END key (default).
When the call is canceled, your radio displays Call Cancelled message (if configured by your service
provider).
Receiving Emergency Group Calls
The radio receives an Emergency Group Call from a selected pre-programmed group. An incoming call is indicated
by an appropriate tone, status icon, and red color of the display.
| | Send Feedback
Page 56
56 | Modes
Non-Tactical Emergency
In Non-Tactical Emergency, the radio switches to a designated Emergency talkgroup when starting Emergency
Operations. This talkgroup is used for the complete duration of the Emergency Operations (you cannot change the
talkgroup).
In TMO, it is possible to configure the radio to make Emergency Non-Tactical Group Calls without sending
attachment. If this is set, the radio assumes implicit attachment after receiving a temporary address.
In DMO, the Non-Tactical Emergency proceeds on the same frequency as the previously selected talkgroup. The
service provider can designate any ITSI address to be used for Emergency Operations, (this can be an Open Group –
broadcast address).
After exiting from Non-Tactical Emergency, the radio goes back to the previously selected talkgroup.
Emergency Individual Calls (Private or MS-ISDN)
The Emergency Individual Calls are Simplex or Duplex Calls with emergency priority. On pressing the
EMERGENCY button, the radio initiates an Individual Call to the provisioned address (private or MS-ISDN). During
this kind of call all user indications are unavailable and all other services are rejected. Emergency Operation ends as
soon as the Emergency Individual Call is ended.
Related Links
Private Call on page 48
Emergency Alarm
The Emergency Alarm is a special status message sent to the infrastructure while starting the Emergency Operations.
The radio can wait for infrastructure acknowledgment for this alarm and attempts retries.
Each time the radio enters the Emergency Operation, it sends the Emergency Alarm. When the Emergency Alarm is
sent successfully, the respective audible tone sounds.
In addition, once the radio is in the Emergency Operation on pressing the EMERGENCY button, an additional emergency
alarm is sent (exception: during Hot Microphone transmission).
The message can be dispatched both in TMO and DMO.
Emergency SDS Status
Radio sends a status message with a preprogrammed value to the destination address set by your service provider.
Emergency SDS Status is available in TMO only. If no status acknowledgment or negative acknowledgment is
received, the radio retries sending the message. Status is not resend if Emergency Alarm or Hot Microphone is
configured.
Emergency Hot Microphone
The Hot Microphone allows you to talk without pressing the PTT button during Emergency Operations. The
transmission continues for a provisioned amount of time. Pressing the PTT button before the Hot Microphone time
expires ends the Hot Microphone operation. Then normal PTT operation in Emergency group call takes over (that is,
the transmission is ongoing for the time the PTT button is held).
Subsequent EMERGENCY button presses during the Emergency Operation restarts the Hot Microphone
transmission.
If a talk permit is granted to another member of the group, the Emergency Call received tone is played. If configured,
the radio automatically attempts to get talk permit again.
Pressing EndSOFT key or END key ends the Hot Microphone operation.
Send Feedback | |
Page 57
Alternating Hot Microphone
The Alternating Hot Microphone is an enhancement of the Hot Microphone. After activation, the radio alternately
enters transmission phases (your microphone is active) and reception phases (you can only listen) for an amount of
time precisely determined by your service provider.
If this feature is enabled, you can initiate the Alternating Hot Microphone by pressing the EMERGENCY button. If you
want to finish earlier or skip the transmission phase, press the END key.
The Alternating Hot Microphone terminates when one of the following conditions is met:
• The radio exits the Emergency Mode.
• The Alternating Hot Microphone timer expires.
• The PTT button is pressed.
• The right SOFT key is pressed (only during the transmission phase).
Note: When the radio goes out of the service, it enters the reception phase and the Alternating Hot
Microphone is on hold. When the radio is back to the service, the Hot Microphone transmission and the
Alternating Hot Microphone resume.
Note: When you are in the Emergency Mode, pressing the EMERGENCY button restarts the Alternating Hot
Microphone.
Modes | 57
Silent Emergency Mode
The Silent Emergency Mode is a type of emergency services that provides no audible indications and no keypad tones
at the entrance. All the display indications are as in the home mode. However, the radio cannot use any services
except for:
• Receiving Ambience Listening
• Sending Silent Emergency Alarms
• Sending GPS location reports
Note: If you try to activate any other feature, it is blocked.
If the Silent Emergency feature is enabled, the radio enters Silent Emergency Mode on pressing the EMERGENCY
button. After entering this Mode the radio stays in TMO or switches to it, depending on the actual state. Once in
TMO, the radio sends Silent Emergency Alarm.
Note: If the radio is in a private or group call, the radio waits until the call ends and then enters the Silent
Emergency Mode.
The radio keeps re-sending the alarm until successful sending is confirmed. After the alarm is successfully delivered,
the radio stays in Silent Emergency Mode and waits for the Ambience Listening.
Your radio exits the Silent Emergency Mode, under the following conditions:
• Press MENU and then # key within 3 seconds.
• Press MENU simultaneously with right NAVIGATION key.
• Press both SOFT keys simultaneously.
• No success in sending the Silent Emergency Alarm and the maximum number of retries has been reached.
• The control room terminates the Silent Ambience Listening.
• The Ambience Listening is disconnected due to another reason.
If you turn off the radio in the Silent Emergency Mode, the radio switches to pseudo power off state. In this state, the
radio appears to be turned off. However, the radio is still on and in the Silent Emergency Mode. On turning the radio
on during the pseudo power off state, the radio acts as during turning on and still is in the Silent Emergency Mode.
| | Send Feedback
Page 58
58 | Modes
Invisible Emergency
It is possible for the service provider to disable visual and audible indications of performing Emergency Operations
on the radio. The purpose of this feature is to hide the fact of using Emergency Operations in a critical situation (e.g.
direct attack on the user) and thus to provide additional layer of safety.
Emergency Mode by Dialing
This feature allows you to trigger Emergency Mode by dialing a predefined number. It initiates the same Emergency
services as you would use the EMERGENCY button. Your radio can store up to eight Emergency numbers.
Note: If this Emergency Mode was triggered by Emergency number (not by EMERGENCY button), you can
press the END key to exit the Emergency Mode.
Disaster Alert
Disaster Alert call is a broadcast emergency call initiated by the radio, with emergency pre-emptive priority that
everyone in a broadcast area can hear. This feature is specifically designed for catastrophic situations, such as
earthquakes, and has the highest priority over other calls. All radios under Disaster Alert display emergency
notification on their screens. The alert message, its duration and destination talkgroup can be configured in the
codeplug.
In order to initiate Disaster Alert, switch the radio to Disaster Alert mode and press PTT button. When the call ends,
the radio will exit the Disaster Alert state.
During Disaster Alert, other functionality is impacted:
• When Disaster Alert begins, any other ongoing services are terminated.
• No other services can interrupt this type of call.
• Hot Mic functionality cannot be used.
• Speech can only be in Clear mode, even if any of the encryption services are enabled. The only exception is E2E
Encryption.
Note: Not all infrastructures support this feature. Please consult with your service provider before enabling
this feature.
Initializing Disaster Alert Calls
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Services → Disaster Alert.
Your radio enters Disaster Alert Mode and it displays Disaster Alert icon.
3 To start the call press PTT.
Your radio displays Disaster AlertIn Use.
Exiting Emergency Operations
Prerequisites: Make sure that your radio is engaged in Emergency Operations.
Procedure:
1 If your radio screen displays Emergency Mic On, press End.
2 Press and hold Exit.
Note: If an Emergency Operation was triggered by Emergency number (not by EMERGENCY button), you
can press the END key to exit the Emergency Operation.
Send Feedback | |
Page 59
3 If your radio displays Do you want to exit?, press Yes to exit.
DMODMO
Your radio exits Emergency Operations.
Repeater Mode
The Repeater Mode provides repeater connectivity between radios operating in the DMO Mode.
Figure 3: Repeater Mode Operation
Modes | 59
A DMO repeater is used to extend the DMO range by retransmitting received information from one radio to another.
It retransmits group calls, private calls and data on a given frequency.
The repeater sends presence signal periodically on a free channel to allow other radios to synchronize on a given
frequency.
Only the radios on the same talkgroup can communicate with each other through the repeater.
Note: This is a selling feature.
Entering the Repeater Mode
To enter Repeater Mode, use one of the following ways:
• From the home screen, select Optns → Repeater Mode.
• From the home screen, press MENU key. Select More . . . → Networks → Repeater Mode.
Setting Monitor Option
Procedure:
1 From the home screen, press Optns.
2 Press Monitor.
3 Select one of the following:
• Off — Your radio works as a repeater only, no operation is available.
• Receive Only — Allows you to listen.
• Receive&Transmit — Allows you to listen and transmit by pressing PTT.
| | Send Feedback
Page 60
60 | Modes
Encryption in the Repeater Mode
While in the Repeater Mode, the radio supports Air Encryption and is able to repeat encrypted calls and messages.
If SCK keys installed on the radio are invalid:
• The radio transfers calls and messages without deciphering them (provided that the encryption level is not the
highest).
• The LED indicator turns orange.
• On pressing the PTT button, Channel Busy or DMSCK is Invalid message appears.
• You cannot make any call.
Send Feedback | |
Page 61
Chapter
4
GPS Location Service
The GPS Location Service feature uses information from Global Positioning System (GPS) satellites orbiting the
Earth to determine the approximate geographical location of your radio.
The GPS Location Service availability, accuracy, and the position calculation time vary depending on the
environment in which you use the radio. The GPS Location Service can assist your dispatcher or colleagues in many
ways such as more efficient deployment of resources or locating your radio when you trigger your emergency service.
The radio can display the location information directly on the screen or send it over the air to your dispatcher to
display it in the control center. Check your radio configuration details with your service provider.
Important: Where the signals from satellites are not available, the GPS Location Service does not work.
This situation usually happens when your radio cannot establish a view of a wide area of open sky, for
example, when the GPS antenna is covered or facing the ground. Such situations include being:
• In underground locations
• Inside buildings, trains, or other covered vehicles
• Under any other metal or concrete roof or structure
• Near a powerful radio or television tower
• In extreme temperature outside the operating limits of your radio
Even if your location information can be calculated in such situations, it may take longer to do so. Therefore, in any
emergency situation, always report your location to your dispatcher. Where adequate signals from multiple satellites
are available, your GPS Location Service feature provides a location, most probably near to your actual location.
The radio can be triggered to send Location Reports in various circumstances, for example:
• Upon a request
• Entering Emergency Mode
• At specified time intervals
• At specified distance intervals
The Location Reports can be sent both in TMO and DMO by using:
• SDS messages
• Packet Data
The radio can be configured to give audio-visual notifications upon sending the Location Reports.
Depending on the radio settings, viewing the radio position and the status of the visible satellites is available. The
position may consist of longitude and latitude, UK, or Irish grid coordinates.
Note: This is a selling feature.
Related Links
Location on page 103
Send Feedback
| |
Page 62
62 | GPS Location Service
Enhancing GPS Performance
Sometimes the GPS feature is unable to complete a location calculation successfully. You hear an audible tone
indicating that your radio cannot see the satellites.
To maximize the ability of your radio to determine a location fix please note the following guidelines:
• Stay in the open — The GPS feature works best where there is nothing between your radio and a large amount of
open sky. If possible, go outside, away from tall buildings and foliage. While the performance in a building is
improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.
• Position your radio to enhance reception — Signals from GPS satellites are transmitted to your GPS antenna,
which is in your radio antenna. Hold your radio away from your body, giving the antenna clear access to satellite
signals. Do not cover the antenna area with your fingers or anything else.
• Stand still — If possible, stand still until your radio is finished determining your location. Moving your radio at a
walking pace while your radio is calculating your approximate location may substantially decrease GPS
performance.
Enabling GPS
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Location → Interface.
3 Select On.
Note: Your service provider can enable this feature.
GPS Icon
When GPS is enabled, the following icon is displayed in the status icon area: Depending on the current GPS state,
the icon can be solid – GPS has a fix, or blinking – GPS is searching for a fix. The blinking GPS icon can be disabled/
enabled by your service provider.
GPS Different Location Displays
Table 14: Different Location Displays
Latitude / Longitude
UK Coordinates Irish Coordinates UTM Coordinates
MGRS Coordinates
Time Time Time Time Time
Latitude 2–Letter Code 1–Letter Code 3–Letter Code 3–Letter Code and 2–
Letter Code
Longitude Easting and Northing
Coordinate
Altitude Altitude Altitude Altitude Altitude
Send Feedback | |
Easting and Northing
Coordinate
Easting and Northing
Coordinate
Easting and Northing
Coordinate
Table continued…
Page 63
GPS Location Service | 63
Latitude / Longitude
Satellites Satellites Satellites Satellites Satellites
• Time — indicates when the last time the location was calculated. The time is provided in Universal Time
Coordinated.
• Letter Code — grid zone or square on the map for different coordinate standard
• Latitude — expressed in degrees, minutes, and seconds.
• Longitude — expressed in degrees, minutes, and seconds.
• Number of satellites — used to calculate the location. In general, more satellites make for better accuracy. The
maximum is 12 satellites.
• Easting — refers to the eastward-measured distance expressed in meters.
• Northing — refers to the northward-measured distance expressed in meters.
Note: Skipping each digit of easting and northing coordinates decreases the accuracy by the factor of 10.
UK Coordinates Irish Coordinates UTM Coordinates
MGRS Coordinates
Viewing Your Position
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Location → Position.
3 Scroll to view the results about the last time your location was calculated.
Note: To refresh your position:
• Select Position — the radio refreshes its position automatically
• Press Refresh
Changing GPS Accuracy
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Location → Accuracy.
3 Select one of the following:
• Medium (default) — Power consumption optimization is combined with less position accuracy.
• High – Better position accuracy is combined with less power consumption optimization.
Note: If connected to an external charging device, the radio automatically enters the High mode.
GPS – Things to Keep in Mind
Where adequate signals from multiple satellites are not available, the GPS feature of your radio does not work. Such
situations include but are not limited to:
• In underground locations
• Inside of buildings, trains, or other covered vehicles
| | Send Feedback
Page 64
64 | GPS Location Service
• Under any other metal or concrete roof or structure
• Near a powerful radio or television tower
• When your GPS antenna is covered (for example, by your hand or other object) or facing the ground
• In temperature extremes outside the operating limits of your radio
Even where location information can be calculated in such situations, it may take longer to do so. Therefore, in any
emergency situation, confirm your location with your dispatcher.
Furthermore, please note that even where adequate signals from multiple satellites are available, your GPS feature
provides only an approximate location, often within 20–100 meters from your actual location.
Send Feedback | |
Page 65
Chapter
5
Main Menu
This chapter contains information on items in the main menu.
You can enter the menu items during a call. If you are viewing a menu when a new call starts, the radio exits the
menu.
Important: Some menu items are model specific and may not be activated or available on your radio.
Scrolling through the Menu
Procedure:
1 From the home screen, press the MENU key.
2 Scroll to the required item by pressing NAVIGATION keys. Press the SOFT key assigned as Select or right NAVIGATION
key to select.
If the menu item contains a further set of menu items, repeat step 2.
Note: You can use shortcuts to access frequently used items.
Menu Icons
The following icons make it easy to identify the menu items at first glance.
Table 15: Menu Icons
Menu Icon Description
Main Menu Items / Context Sensitive Menu
It is assigned to MENU when the main menu items / context-sensitive menu are active.
Messages
Send status messages,
Send text messages (free text or according to user defined or predefined templates),
Received messages in Inbox.
Contacts
Add, search, edit, or erase entries in the contact list.
Table continued…
| | Send Feedback
Page 66
66 | Main Menu
Menu Icon Description
Browser
Starts the WAP browser.
Security
Lets you turn on/off and verify security features, and change passwords.
Setup
Allows you to customize your radio.
More...
Contains additional setup menu items.
Group Setup
Contains additional menu items for Scanning Talkgroups features.
Favorites
Contains shortcuts to frequently used talkgroups and contact numbers.
My Info
Displays information about your radio and its numbers.
Recent Calls
Contains a list of recent calls.
Shortcuts
Allows you to view and manage shortcuts to menu items.
RUI
Allows you to log in and log out of the radio.
Networks
Allows you to select a network.
Location
Displays location of your radio.
Packet Data
Send Feedback | |
Allows you to send data from your radio to other devices.
Services
Allows you to manage Broadcast, Assistance and Disaster Calls.
Page 67
Messages
This feature allows you to send and receive text messages. A message can contain up to 1000 characters, depending
on your service provider settings.
Pressing the PTT button when a message is highlighted can cause one of the following actions, depending on your
service provider settings:
• The radio ignores the PTT button request.
• The radio starts a Private Call with the message sender.
• The radio starts a Group Call on a currently selected talkgroup.
New Message
This menu item allows you to create a new message.
Sending Messages to Private/Phone
Procedure:
Main Menu | 67
1 From the home screen, press the MENU key.
2 Select Messages → New Message.
3 Enter your message and press Send.
4 If needed, select Private/Phone.
5 Enter recipient number or press abc to choose it from your contacts.
Note:
For Private target selection, you can enter either Individual Short Subscriber Identity (ISSI) or Group
Short Subscriber Identity (GSSI) of the recipient.
ISSI – a unique, individual ID assigned for each radio.
GSSI – in Dimetra called Group ID or Talkgroup ID.
6 Press Send, or SEND key, or the PTT button.
Sending Messages to Groups
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → New Message.
3 Type your message and press Send.
4 If needed, select Group.
5 Select a group to send the message.
Sending Store and Forward Messages
Prerequisites: Your service provider enables the Store and Forward feature.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → New Message.
3 Press MENU key and select Message Setup → On/Offline users.
4 Enter your message and press Send.
5 If asked for the Target selection, select one of the following:
| | Send Feedback
Page 68
68 | Main Menu
• Private – enter the private number or press abc to choose the destination number from the contact list.
• Phone – enter the phone number or press abc to choose the destination number from the contact list.
Note: Your service provider can enable to send a Store and Forward message to a talkgroup.
6 Select Send, or press SEND key or PTT button.
Delivery Report
Delivery Report is an acknowledgment that the radio can request upon sending a message to an individual recipient.
You can define what type of Delivery Report your radio requests, or turn on/off this feature.
If the Delivery Report is received shortly after the message was sent, the radio:
• Displays a pop-up with one of the following messages:
• Message Sent – if no Delivery Report is requested (and when a Store and Forward message has been received
at the Store and Forward server)
• Message Delivered – if the Delivery Report is requested and the message has been received by the target radio
• Message Read
– if the Consumed Delivery Report is requested and the message is opened on the target radio
• Message Failed – if the Delivery Report is requested and the message has not been received by the target
radio within a defined time period
• Saves the Delivery Report in Outbox along with a copy of the message.
If the Delivery Report is received after a longer period of time, the radio:
• Saves the Delivery Report in Outbox along with a copy of the message.
• If Delivery Report Notifications functionality is configured by your service provider, the radio also:
• Temporarily saves a Delivery Report message in Inbox. The notification disappears after it is read.
• Displays New Message icon.
• Displays New Delivery Status notification screen (if possible).
Viewing Delivery Reports
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Find a required message and select Read.
4 Press MENU key.
5 Select Delivery Status.
Configuring Delivery Reports
Prerequisites: Your service provider enabled the delivery report configuration.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → New Message.
3 Press MENU key and select Delivery Report.
4 Select one of the following:
• None — the radio does not request any delivery report.
• Received — the radio requests reports on your messages that were received.
• Consumed — the radio requests reports on your messages that were read.
• Both — the radio requests reports on your messages that were received and read.
Send Feedback | |
Page 69
Inbox
It contains up to 100 new or old incoming messages.
Table 16: Inbox Icons
Icon Description
Unread (New) Message
Read (Old) Message
Sender Information in Message View — name or number
Time and Date Stamp in Message View — arrival time and date
Delivery Status Received — delivery status for Store & Forward messages
Main Menu | 69
Messages sub-menu indicates the number of the messages. If the indication is for example 2/4, it means that two
unread and four read messages are in the Inbox.
Entering the Inbox
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
Note: The status (if any) of the list is displayed for a few seconds:
• No New or Old Messages — The screen returns to the previous display within a few seconds.
• Inbox Full — Select Ok.
Receiving New Messages
Procedure:
1 New message received.
Your radio displays an animation and plays a New Mail Received tone.
2 Select one of the following:
• Read — opens the entire message.
• Back — dismisses the message. You can access the message later from the Inbox.
Using Submenus in the Inbox and the Outbox
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox or Outbox.
3 Highlight the required message and press MENU key.
4 Select one of the following:
• Store — Saves a message as a template. Change the default template name and press Ok.
• Delete — Deletes the selected message. Press Yes to confirm.
• Delete All — Deletes all the messages in the Inbox/Outbox. Press Yes to confirm.
| | Send Feedback
Page 70
70 | Main Menu
• Reply (only for Inbox) — Invokes the edit screen with the old message as default text and the message
originator as a recipient. After editing, press Send, the PTT button, or the SEND key to send.
• Resend (only for Outbox) — Invokes the edit screen with previously entered text with the same recipient.
After editing, press Send, the PTT button, or the SEND key to send.
• Forward — Invokes the edit screen with the old message to send it to a different participant. After editing,
press Send, the PTT button, or SEND key to send.
• Refresh — Re-orders the message list and displays the new messages.
• Delivery Status (only for Outbox) — Shows the date and time of the message when it sent, delivered, read,
and expired was not delivered, expired was not read, failed unknown.
Embedded Number
This feature allows you to call a number from a message or to start a group call with the message sender talkgroup.
Storing Numbers from Messages
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can save the sender's or embedded number from the message to a new or existing
contact.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 Highlight the required number and press Store.
7 Highlight required contact and press View.
Note: To store a number for a new contact, select [New Contact] and fill out the required fields. Press
Done to save it..
8 Select Edit.
9 Choose the Type of the new number and press Done.
Calling Numbers in Messages
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can return a voice call to the sender of a message or to any number that is embedded in
the message text.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 To call, highlight to the required number and press the PTT button or the SEND key.
7 Select Ctype to choose the type of call (Private, Phone, or PABX).
8 Press the PTT button or the SEND key.
Making Group Calls on theTalkgroup of the Message Sender
Prerequisites: Embedded Number feature is enabled by your service provider.
Send Feedback | |
Page 71
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and press the PTT button.
Immediate Message
When the new immediate message is received, radio plays the New Mail Received tone and displays the content
overlapping your previous screen. All immediate messages are stored in the Inbox. If the radio is in PIN Lock state,
immediate message is displayed after correct PIN is entered.
Note: This is a selling feature.
Outbox
Outbox stores all sent messages.
Table 17: Outbox Icons
Main Menu | 71
Icon Description
Delivery in Progress
Delivery Accomplished
Delivery Failed
Successful Outgoing Message
Failed Outgoing Message
CO Box
CO Box contains incoming and outgoing Call-Out messages arranged chronologically with the newest at the top of
the list. Clicking Select on a Call-Out message headline displays more detailed information on the item.
When the radio is in normal mode, you are able to browse through all messages in the CO Box. However, if the radio
is in the Call-Out mode, you can only browse through the information regarding the currently ongoing Call-Out
message.
Related Links
Call-Out on page 116
RMS Box
RMS Box stores all incoming and outgoing Radio Messaging System (RMS) messages, both Status messages and
Free Text messages.
WAP Box
Each WAP Push message can be loaded immediately or stored as a message in WAP Box. Then it can be accessed by
pressing MENU → Messages → WAP Box. All the WAP Push messages are passed to the browser.
| | Send Feedback
Page 72
72 | Main Menu
Related Links
WAP on page 109
WAP Push on page 116
Templates
This feature is used to store up to 100 predefined and your message templates. Each of the Inbox and Outbox
message can be stored as a template. Each template name and text can be edited afterwards.
Sending User-Defined Templates
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Templates.
3 Highlight the required template name and press Send.
4 Do one of the following:
• Enter the number or press abc to select the name from your contact list. Press Send.
• Select required talkgroup from the TalkGroup List.
Setting User-Defined Templates
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Templates.
3 Highlight the required template and press MENU.
4 Select one of the following:
• View — Displays template text.
• Delete — Deletes the template.
• Edit Text — Opens edit screen with the template text. Edit the text and press MENU. Select Save Changes to
save edited template, or Store to save the edited template as a new one.
• Edit Name — Opens edit screen with the template name. Press Ok to save the template.
Predefined Templates
Predefined message templates are programmed into your radio. You are allowed to perform limited edit operations of
the predefined template. You can send it, but you are not able to store the edited template or erase it from the
predefined template list.
Viewing Predefined Templates
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Predefined.
3 Highlight the required template and press MENU key.
4 Select View.
Sending Predefined Templates
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Predefined.
Send Feedback | |
Page 73
Main Menu | 73
3 Highlight the required template and press Send, the PTT button, or the SEND key.
Note: You can edit the predefined template before you send it. Press the MENU key and select Edit. Edit
screen opens with the template text. You are only allowed to replace the existing text.
Status Messages
The radio allows you to send two types of status messages: statuses and targeted statuses. Your service provider
determines which type is enabled on the radio.
Statuses can be sent either to a selected talkgroup or to a private number programmed by your service provider.
Targeted statuses can be sent to any talkgroup defined for the radio or to any private number (from the contact list or
entered manually).
Viewing a Status Message Number
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Send Status.
3 Press the MENU key and select View.
Sending Status Messages
This procedure allows you to send status messages to either a selected talkgroup or a programmed private number.
Only one option can be enabled at a time.
Prerequisites:
• If sending statuses to talkgroups is enabled: switch to the talkgroup to which you want to send a status message.
• If sending statuses to private numbers is enabled: no action is needed, the private number is set up by your service
provider
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Send Status.
3 Do one of the following:
• Highlight the required status message and press Select, the PTT button, or the SEND key.
• If the status list is empty, enter a 5 digit status message number and press Send.
Targeted Status Messages
This feature enables sending status messages to user selectable addresses. By default, targeted status messages can be
sent to private or talkgroup addresses. Your service provider may restrict valid addresses to numbers stored in
Contacts.
Sending Targeted Status Messages
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Send Status.
3 Do one of the following:
• Highlight the required status message and press Select, the PTT button, or the SEND key.
• If the status list is empty, enter a 5 digit status message number and press Send.
4 Do one of the following:
• Enter the number or press abc to select the name from your contact list. Press Send.
| | Send Feedback
Page 74
74 | Main Menu
• Select required talkgroup from the TalkGroup List.
The display shows one of the following delivery reports:
• Status Sent.
• Status Failed.
Contacts
This sub-menu stores all your contact numbers. Each entry requires the following information:
• Name — if you store more than one number to one contact, this entry is required.
• Type — each contact must be assigned to one of the following types:
Table 18: Contact Types
Contact Icon Description
Private
Cannot have a speed dial number.
Mobile
Home
Work
PABX
Other
Pickers
Indicate more than one number in a contact.
• # (number) — each contacts entry must contain a number.
• Speed # — accept the default Speed Dial number or change it.
Creating Contacts
Procedure:
1 From the home screen, select Contcs.
2 Select [New Contact].
3 Highlight Name and press Change. Enter the name of your contact and press Ok.
4 Highlight Type and press Change. Select the required type of your contact.
Note: You can use the left and right NAVIGATION keys to select the type of your contact from the
Contact Details screen.
5 Highlight # (number) and press Change. Enter the number of your contact and press Ok.
6 If needed, highlight Speed # and press Change. Enter the speed dial number (1– 1000) of your contact and press
Ok.
Send Feedback | |
Page 75
Note: If the entered number exist, the radio displays Overwrite? message. Press Yes to confirm, or No
to enter the speed dial number again.
7 Press Done.
You have create a contact with one number. To add additional number repeat steps 4–6.
Editing Contacts
Procedure:
1 From the home screen, press Contcs.
2 Highlight the contact you want to edit.
3 Press the MENU key.
4 Press Edit.
5 Highlight one of the following entries and press Change to edit:
• Name
• Type
• # (number)
• Speed #
6 Press Done.
Main Menu | 75
Deleting Numbers
Procedure:
1 From the home screen, press Contcs.
2 Select a contact you want to edit.
3 Use left or right NAVIGATION keys to choose the required number.
4 Press MENU.
5 Select Delete number.
Note: If an entry contains only one number, deleting the number deletes the entry.
6 Press Yes.
Deleting Contacts
Procedure:
1 From the home screen, select Contcs.
2 Highlight a contact you want to delete.
3 Press the MENU key.
4 Select Delete contact.
5 Select Yes.
Checking Capacity
When and where to use: To see how many numbers are stored in the radio.
Procedure:
1 From the home screen, select Contcs.
2 Press the MENU key.
3 Select Capacity.
4 Select one of the following:
| | Send Feedback
Page 76
76 | Main Menu
• Private
• Phone / PABX
• Contact
Dialing through the Contact List
Procedure:
1 From the home screen, press Contcs.
2 To highlight the required contact, use up and down NAVIGATION keys, or enter up to 12 characters of the contact
name.
3 If the contact has more than one number, use left and right NAVIGATION keys to select the required number.
4 Press the PTT button to initiate a simplex call with a Private number. Otherwise use the SEND key to initiate a
duplex call.
Browser
This menu item activates a WAP browser that allows you to browse the Internet from your radio.
Related Links
WAP on page 109
Security
This sub-menu stores all your security settings.
PIN Protect
This feature allows you to enable PIN code authentication at the next power on. This code protects your radio against
unauthorized use.
If you are unable to unlock the radio, you can only send or receive Emergency Calls and adjust the volume level with
the ROTARY KNOB.
Related Links
Unlocking Your Radio on page 31
Changing PIN Codes on page 77
Protecting the Radio with a PIN Code
Procedure:
1 From the home screen, press MENU → Security → PIN Protect.
2 Select On.
3 Enter 4-digit PIN code. By default it is 0000 (four zeros).
Suggestion: To increase security, set your own PIN code.
Post requisites: Each time you turn on the terminal, PIN code is required.
Unblocking Your Radio
Prerequisites: You blocked your radio by entering incorrect PIN code for three times (by default).
Send Feedback | |
Page 77
Procedure:
1 Radio displays Unit BlockedEnter PUK.
2 Enter 8–digit PUK (Personal Unblocking Key) number.
Note: The PUK is an eight-digit master code provided by your service provider.
3 Enter the new PIN code twice.
Changing PIN Codes
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Change Code.
3 Radio prompts for the Old Code. Enter currently used 4-digit security code (default setting is 0000).
4 If the entered code matches the old code, radio prompts for the new code twice.
Your radio displays Code Accepted.
Related Links
Unlocking Your Radio on page 31
PIN Protect on page 76
Main Menu | 77
Keylock Setup
The keypad lock feature allows locking the keypad to prevent pressing a key accidentally. The keypad lock/unlock
can be invoked by using an appropriate option from the radio menu or by using a predefined menu shortcut. By
default press MENU, and then * key.
Your service provider can determine which of the following elements are additionally inoperative while the keypad is
locked:
• The PTT button
• Side buttons
• The ROTARY KNOB
• The ON/OFF/END/HOME key
The EMERGENCY button is always operative.
Related Links
Locking/Unlocking the Keys/Buttons on page 32
Keypad Lock Notification
When the keypad is locked, your service provider can configure one of the following instructions:
• None — no notification is displayed.
• Notification Only — Keys Locked is displayed.
• Notification and Instruction — Press Menu * to lock/unlock keypad is displayed.
Setting Automatic Keylock Delay
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Keylock Setup → Delay.
3 Use up and down NAVIGATION keys to change the minutes and press Done.
| | Send Feedback
Page 78
78 | Main Menu
Setting Keylock on Startup
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Keylock Setup → Start Locked.
3 Select On/Off.
Air Encryption
Air Encryption is a feature that enables encryption of entire communication between the radio and infrastructure,
which results in increased security of calls, messages, and data.
If configured by your service provider, the radio plays a sound and displays Call & Data Not Encrypted when
encryption is on and you receive a clear call (unencrypted). This feature provides service confidentiality between you
and the system.
In the TMO Mode, when Air Encryption is enabled on you radio but cannot be supported due to an infrastructure
failure, the following icon appears on the display: .When encryption is not available in the DMO Mode, the radio
displays:
This menu item allows you only to view air encryption state.
Related Links
Status Icons on page 27
.
Note: This is a selling feature.
Viewing the Air Encryption State
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → AirEncrypt.
3 Your radio displays:
a Air Encryption Is Off.
b Air Encryption Is On.
Air Encryption Key Deletion
Please check with your service provider whether the radio is provided with Air interface encryption keys. You can
delete the Air interface encryption keys from the radio by entering the following sequence: **00##.
Note:
• It takes a minute for this feature to delete all the encryption keys from the radio. During this time, do
not remove the battery.
• Deletion is performed in idle TMO/DMO or Emergency Operation.
Caution: Using this feature will disable the radio, and your service provider will need to re-enable the
radio.
K Validity
K (Key) is a secret key the infrastructure uses to authenticate the radio in the system. It is part of the authentication
that provides service confidentiality between your radio and the system.
Send Feedback | |
Page 79
Main Menu | 79
Verifying K Validity
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → K Validity.
3 Your radio displays:
• K is Valid — the infrastructure can authenticate your radio.
• K is Invalid — the infrastructure is unable to authenticate your radio. Please call your service provider to
restore the key to your radio.
SCK (Air Interface Encryption Class 2)
SCK (Static Cipher Key) is a secret key used for the Air Interface Encryption Class 2. It may be used to encrypt calls
and data in TMO and DMO. The SCK air interface encryption provides service confidentiality between radios and
infrastructure when in TMO, and between radios when in DMO. A radio is capable of being loaded with up to 32
SCKs. Specific keys are used for encrypting the air interface.
Any mismatch between radios and/or infrastructure impacts communication – only those using the same key as the
transmitting party are able to decode and hear the communication.
TMO SCK
Use of SCKs in TMO needs to be enabled by your service provider. The SCKs used in TMO are called TMSCKs.
DMO SCK
Use of SCKs in DMO needs to be enabled by your service provider. The SCKs used in DMO are called DMSCKs.
Changing DMO SCK
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → DMO SCK.
3 Press Next.
4 Radio displays Change to version .
5 Select one of the following:
• Yes — to change the key. Your radio displays Key version changed.
• No — to leave the key. Your radio displays Code Not Changed.
Verifying TMSCK Validity
When and where to use: To ensure that the TMSCKs in the radio are valid and can be used for the air interface
encryption.
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → TMSCK Validity.
3 The radio displays:
• TMSCK is Valid – the radio can work encrypted in TMO.
• TMSCK is Invalid – the radio cannot work encrypted in TMO. Please contact your service provider to restore
SCKs to your radio.
| | Send Feedback
Page 80
80 | Main Menu
Verifying DMSCK Validity
When and where to use: To ensure that the DMSCKs in the radio are valid and can be used for the air interface
encryption.
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → DMSCK Validity.
3 The radio displays:
• DMSCK is Valid – the radio can work encrypted in DMO.
• DMSCK is Invalid – the radio cannot work encrypted in DMO. Please contact your service provider to restore
SCKs to your radio.
Covert Mode
This feature enables you to completely shut down all visible and audible alerts and notifications making the radio
unnoticeable even in a silent and dark environment.
When your radio is in the Covert Mode, you cannot enter the following menu items of the Setup menu.
• Vibrate.
• Set Volume
• Tones
• Backlight (in Display menu item)
When the Covert Mode is turned on:
• All tones are set to Off (corresponding to All Tones menu entry).
• Group audio is set to Spkr Cntrl (corresponding to Audio Toggle menu entry).
• The private speaker is set to Off (this setting causes all the calls are routed through the earpiece).
• Backlight is set to Disabled (corresponding to Backlight menu entry).
• The LED indicator is switched off.
The radio powers up in the mode set before turning off. Thus if the Covert Mode was set before turning off, the radio
turns on in the Covert Mode .
When the Covert Mode is turned off, all the changed settings are reverted to the previous state.
This feature can be used as the One-Touch Button.
Activating the Covert Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Covert Mode.
3 Select one of the following:
• On — all tones are set to off, and the backlight and the LED are disabled immediately. The group audio is
routed to the earpiece. The radio displays Covert Mode On.
• Off — all settings for tones, backlight and audio are restored. The radio displays Covert Mode Off.
Setting to Vibrate in the Covert Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Covert Mode → Vibrate.
3 Select one of the following:
Send Feedback | |
Page 81
Main Menu | 81
• On — To restore all vibrations.
• Off — To disable all vibrations.
SDS Remote Control
SDS Remote Control is a feature that enables to remotely control behavior and configuration of the radio via special
SDS messages. The messages can be sent both in TMO and DMO (including the Repeater Mode) by any radio
capable of controlling other radios. During the execution of the Remote Control messages, depending on your service
provider settings, the radio can play a tone, vibrate, or display an appropriate icon in the status icon area.
Note: This is a selling feature.
Setting SDS Remote Control
When and where to use: To enable/disable support of special SDS messages that allow remote control of the radio.
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Remote Control.
3 Select On to enable, or Off to disable remote control.
Setup
This sub-menu allows you to change your radio configuration.
Vibrate
This sub-menu allows you to determine if your radio vibrates, or rings, or both vibrates and rings when receiving a
call.
Setting Default Vibrate
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Vibrate.
3 Select one of the following:
• Vibe then Ring
• Vibe Only
• Ring Only
Setting Detail Vibrate
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Vibrate → Details....
3 Select one of the following:
• Duplex Calls — Sets the vibrate settings for Phone, PABX, and Duplex Private calls.
• Simplex Calls — Sets the vibrate settings for Simplex Private Calls.
• Group Call — Sets the vibrate settings forGroup Calls.
• Messages — Sets the vibrate settings for status messages and text messages.
| | Send Feedback
Page 82
82 | Main Menu
4 Select the required setting, and press Select.
Note: If you choose Duplex Calls, Simplex Calls or Messages, the settings available are Vibe then
Ring (for messages it is Vibe & Ring), Vibe Only or Ring Only. If you choose Group Call, the
settings available are Vibe On or Vibe Off only.
Ring Style
This sub-menu allows you to set the incoming call ring style.
Setting Ring Style
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Ring Style.
3 Select one of the following:
• Duplex — To set the new ring style to all duplex calls.
• Simplex — To set the new ring style to all simplex calls.
Note: Upon entry into this sub-menu, the display shows the current ring style used.
4 Scroll to the desired style and press Select.
Note: New ring style is played immediately for a few seconds. If necessary, adjust the volume level.
Set Volume
This menu item allows you to adjust the Simplex, Duplex, Earpiece, Speaker, and Keypad tone volume.
Related Links
Volume Adjustment Mode on page 84
Setting Volume
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Set Volume.
3 Select one of the following:
• Duplex Vol — sets the volume level for duplex ringtones.
• Simplex Vol — sets the volume level for simplex ringtones.
• Earpiece Vol — sets the volume level for the earpiece.
• Speaker Vol — sets the volume level for the speaker.
• Keypad Vol — sets the volume level for keypad tones.
Note: If the display shows only one option Volume, you can adjust all of the above settings at once.
You have the option to change the settings individually when the Volume Adj. Mode is set to
Individual.
4 Press right or left NAVIGATION key to change the value.
Note: When the battery level is low it is not recommended to attach the 4 Ohm speaker to the radio as it
can cause reset or shutdown of the radio.
Related Links
Setting Volume Adjustment Mode on page 85
Send Feedback | |
Page 83
Language
This sub-menu allows you to change the language of the radio.
Setting Language
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Language.
3 Select desired language.
Data Setup
This menu item allows you to set up your radio to transmit and receive data from the external device.
To connect your radio accessory connector to the external device, use the PMKN4025 cable. The external device
must run an application complying with the TETRA standards.
Note:
• Data services are available only in TMO Mode.
• Data services are blocked in TXI Mode.
• When set to Voice Only, the built in data modem is disabled to conserve battery power.
Main Menu | 83
Setting Data Function
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Data Setup.
3 Select one of the following:
• Voice Only — Your radio receives and transmits voice calls only.
• Data Only — Your radio acts as a modem. It rejects incoming and outgoing voice calls (except for Emergency
Calls), status and text messages.
• Voice & Data — Your radio acts as a modem but voice calls have priority over data calls and can interrupt
them.
Audio
This menu item allows you to adjust your radio audio settings.
Audio Profiles
An audio profile is a set of audio parameters, such as the volume of alert tones, that are configured by your service
provider to fit a particular operating environment. For example, the audio parameters can be adjusted to situations
when the radio operates inside a building or on a noisy street.
If programmed, the radio displays a name of a currently used audio profile (on the home screen) and/or an appropriate
icon associated with the profile (in the status icon area).
Your service provider can configure a maximum of ten audio profiles.
For a detailed description of a specific audio profile, contact your service provider.
| | Send Feedback
Page 84
84 | Main Menu
Setting Audio Profiles
When and where to use: To adjust the audio parameters of the radio its current operating environment.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Audio → Audio Profile.
3 Select a required profile.
Howling Suppression
The howling suppression is a mode increasing the stability of the acoustic feedback loop. The radio eliminates
howling caused by the feedback loop from the receiving radios to the sending radio in simplex calls. You can toggle
the howling suppression during an active call.
To enable this anti-howling function, you can either use the radio menu or the corresponding One-Touch Button.
Setting Howling Suppression
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Audio → Howling Suppr..
3 Select required setting.
Note: Your service provider can set up the state of the howling suppression on powering up the radio.
Depending on the settings, the radio can either disable the howling suppression or set the last
remembered state.
Audio Toggle
You can control audio routing (speaker/earpiece) for any private or group call through the dedicated SPEAKER CONTROL
key. You can also define through the menu to have all group calls in high audio or controlled by the SPEAKER CONTROL
key.
Setting Audio Toggle
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Audio → Audio Toggle.
3 Select one of the following:
a Always Loud — The audio sound comes from the speaker (high audio only).SPEAKER CONTROL key is disabled.
b Spkr Cntrl — The audio goes through the earpiece or the speaker. You can switch between low and high
audio by pressing SPEAKER CONTROL key.
Volume Adjustment Mode
You can set the volume to Individual or Common. When it is set to Individual, the volume level for Voice, Duplex,
Simplex, Earpiece, Speaker and Keypad can be set per user preferences. When set to Common, the audio has one
setting for all items.
Related Links
Set Volume on page 82
Send Feedback | |
Page 85
Setting Volume Adjustment Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Audio → Volume Adj. Mode.
3 Select one of the following:
• Individual — You can set Duplex, Simplex, Earpiece, Speaker and Keypad per your preferences in MENU
→ Setup → Set Volume.
• Common — You can set one value for all the items in MENU → Setup → Set Volume.
Related Links
Setting Volume on page 82
Tones
This field sets the volume level for the tones set.
Keypad Tone
Main Menu | 85
You can activate/deactivate keypad tone at every key press.
Setting Keypad Tone
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → Keypad Tone.
3 Select one of the following:
• On — Activates keypad tone.
• Off — Deactivate keypad tone.
All Tones
You can activate/deactivate all tones.
Setting All Tones
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → All Tones.
3 Select one of the following:
a On — Activates all the tones.
b Off — Deactivates all the tones.
Talk Permit
You can set a different tone upon pressing the PTT button.
Setting Talk Permit
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → Talk Permit.
| | Send Feedback
Page 86
86 | Main Menu
3 Select one of the following:
• No Tone — No tone heard upon pressing the PTT button.
• Short Tone — Short tone heard upon pressing the PTT button.
• Normal Tone — Factory-default tone heard upon pressing the PTT button.
Clear to Send
You can activate/deactivate tone for the transmitting radio that the receiving radio is ready to accept the transmission.
Setting Clear to Send
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → Clear to send.
3 Select one of the following:
• Tone On — Activate clear to send tone.
• Tone Off — Deactivates clear to send tone.
Periodic Alert
You can activate/deactivate periodic tone indication for the missed calls, the unread messages, and low battery level.
For each notification, your radio generates an unread message tone with the amber LED color indication.
Setting Periodic Alert
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → Periodic Alert.
3 Select one of the following:
• Alert — Activates/deactivates periodic tone.
• Period — Indicates the time between each periodic tone.
D-PTT Tones
This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in idle or the
Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, the user can press and hold the PTT button once again to get the permission to talk.
Otherwise, if the user presses the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent keeping the PTT button pressed, it results in permission to talk. The D-PTT tone is not
audible on a sending radio.
Note: This feature needs to be enabled by your service provider.
Setting D-PTT Tones
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → D-PTT Tones.
3 Select one of the following:
Send Feedback | |
Page 87
• D-PTT Mode — Activates/deactivates D-PTT tone.
• Tone Style— Indicates how many times the D-PTT tone is played.
Display
This menu item allows you to adjust your radio display settings.
Related Links
Display on page 26
Display on page 26
Setting Time and Date on the Display on page 89
Setting Flip Display
When and where to use:
The feature is useful for a user who has to wear the radio on a shoulder, belt, or lapel and at the same time wishes to
read the display upside down.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Flip Display.
3 Select one of the following:
Main Menu | 87
• On – to activate this feature.
• Off – to deactivate this feature.
Setting Font Level
When and where to use: To increase/decrease text size so you can adjust the interface readability to existing
conditions.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Font Level.
3 Select one of the following:
• 1 – small font size
• 2 – medium font size
• 3 – large font size
Note: In some languages number of available font levels can be limited.
Setting Large Idle Font
When and where to use: To enable/disable large font on the home screen.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Large Idle Font.
3 Select On to enable, or Off to disable displaying large font on the home screen.
Note: Large Idle Font is not available in some languages.
| | Send Feedback
Page 88
88 | Main Menu
Setting Extra Zoom
Enabling Extra Zoom simultaneously changes three settings: switches Font Level to the largest possible one,
activates Large Idle Font, and sets Extended Status Icons to Idle Only
If you modify any of these settings, for example decrease the font level, the radio leaves the Extra Zoom Mode.
However, to restore all the three previous settings, you need to manually change the values of Font Level, Large Idle
Font, and Extended Status Icons. If you cannot restore a setting, contact your service provider.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Extra Zoom.
3 Select On to enable or Off to disable extra zoom.
Note: Extra Zoom is not available on radios using the SIM card encryption.
Setting Extended Status Icons
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Extended Status Icons.
3 Select one of the following:
• Disabled – the radio always displays icons in normal size.
• Idle Only – the radio displays enlarged icons only on the home screen.
• Always – the radio displays enlarged icons both on the home screen and when browsing though the radio
menu.
Setting Screen Saver
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Screen Saver.
3 Select one of the following:
• Activate — To activate/deactivate this feature.
• Text — To set the text on the screen saver when this feature is activated.
Setting Backlight
When and where to use: To save the battery power.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Backlight.
3 Select one of the following:
• Auto – backlight is triggered by turning on the radio, by pressing any key on the device or on the accessory
that is connected to it. Also charging or getting signal from the services like: Call-Out message, RUA request,
DGNA and TX timeout during priority call are going to turn on the backlight.
• Semi Auto – backlight is turning on when you are switching on the radio, pressing assigned button to the
backlight feature, or charging.
• Disabled – backlight is disabled and the display is always dimmed.
• On – backlight is always on.
Send Feedback | |
Page 89
Note: Setting the backlight intensity level by pressing the BACKLIGHT key changes the LED, keypad
backlight, and EMERGENCY button backlight intensity.
Setting Wallpaper
When and where to use: To change the look of the home screen.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Wallpaper.
3 Select one of the following:
• On — To activate this feature.
• Off — To deactivate this feature.
Setting Contrast
When and where to use: This feature sets the contract of the display to enhanced visibility of the interface.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Contrast.
3 Use left and right NAVIGATION key to change the value.
4 Press Ok.
Main Menu | 89
Time and Date
This sub-menu controls the displayed time and date on the home screen.
Note: If the Home Display Text Message feature is enabled, Home Mode Display Text may cover time and
date, depending on the Configurable Idle Screen settings.
Note: Infrastructure synchronizes the time and date. When not within the infrastructure signal range you
can set the values manually.
Setting Time and Date on the Display
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Display.
3 Select one of the following:
• Time & Date — Your radio displays time and date.
• Time Only — Your radio displays time only. Format Date sub-menu is disabled.
• Date Only — Your radio displays date only. Format Time sub-menu is disabled.
• Off — Your radio does not display time nor date. Format menu is disabled.
Related Links
Display on page 26
Display on page 87
Setting the Time Format
Prerequisites: If MENU → Setup → Time & Date → Display is set to Time & Date or Time Only.
| | Send Feedback
Page 90
90 | Main Menu
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Format → Format Time.
3 Select one of the following:
• 12-Hour — Displays the time with am (before noon) or pm (after noon) indication.
• 24-Hour.
Setting the Time Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Set → Set Time.
3 Enter current time using NAVIGATION keys or keypad.
4 Press Done.
Setting the Date Format
Prerequisites: If MENU → Setup → Time & Date → Display is set to Time & Date or Date Only.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Format → Format Date.
3 Select (D — day, M — month, Y — year):
• DD/MM/YY
• MM/DD/YY
• DD-MON-YY
• YY/MM/DD
Setting the Date Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Set → Set Date.
3 Enter current time using NAVIGATION keys or keypad.
4 Press Done.
Setting Time Offset
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Set → Time Offset.
3 Enter time offset using NAVIGATION keys.
Note: You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or behind.
4 Press Done.
Send Feedback | |
Page 91
Setting Automatic Updates for the Time and Date
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → System Update.
3 Select one of the following:
• Off — All the infrastructure informations are ignored. The radio uses internal time and offset.
• Time Only — Time displayed is calculated from the offset programmed by your service provider added or
subtracted from the infrastructure time.
• Time & Offset — Time and offset are updated after receiving from the infrastructure.
Energy Economy
Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all downlink time
slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode is not needed.
Enabling Energy Economy
Procedure:
Main Menu | 91
1 From the home screen, press the MENU key.
2 Select Setup → Energy Economy → EE Selection.
3 Select one of the following:
• On — Activates Energy Economy feature.
• Off — Deactivates Energy Economy feature.
Viewing the Energy Economy Status
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Energy Economy → EE Status.
3 The Energy Economy status is displayed as:
• Energy Ecnmy Is Supported By System
• Energy Economy Is Currently Not Supported By System
Transmission Power Class
Transmission Power feature enables your radio to choose whether to transmit with Class 3L or Class 4. The signal
strength icon indicates when the radio uses this feature.
Selecting RF Power
When and where to use: If you are entering the area that requires higher signal strength.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → RF Power.
3 Select one of the following:
• Hi RF Power — Activates this feature.
• Normal RF Pwr — Deactivates this feature.
| | Send Feedback
Page 92
92 | Main Menu
Note:
• Changing RF Power Class to Normal RF Pwr during calls may result in dropping the call. The
power level may be not sufficient to sustain the transmission.
• Battery consumption is higher when Hi RF Power is selected.
Note: This is a selling feature.
Book On
This menu item allows you to edit RUA/RUI feature settings to automatically accept or reject book on requests.
Related Links
RUI on page 101
RUA/RUI on page 108
Editing Book On Settings
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Book on Setup.
3 Select one of the following:
• Book on Accept — Radio accepts all the book on requests.
• Book on Reject — Radio rejects all the book on requests without any notification.
Rotary Knob
This menu item allows you to set all the related functionality of the ROTARY KNOB.
Setting Rotary Knob Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Rotary Mode.
3 Select one of the following:
• Dual — Both modes are available. Turn the ROTARY KNOB to adjust the volume or press and then turn to
switch to a different talkgroup.
• Volume — The knob is used only as a volume control. Turn it clockwise to increase the audio volume level.
• Scroll — The knob is used only to change the talkgroup, or in the menu to scroll menu items.
Note: If you choose Scroll and the display shows:
• Scroll Selected — To adjust volume level go to the main menu, select Setup → Set Volume.
• Function Keys are set to Adjust Volume — You can use your programmable SIDE buttons to
adjust volume.
Note: The ROTARY KNOB and the SIDE buttons are paired. When the ROTARY KNOB mode is set to
Volume or Dual, the SIDE buttons support the One-Touch Button feature.
Related Links
One-Touch Button Feature on page 36
Send Feedback | |
Page 93
Setting Rotary Lock
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Rotary Lock.
3 Select one of the following:
• Locked — Locks ROTARY KNOB, you can unlock it by selecting Unlocked or by pressing and holding ROTARY
KNOB.
• Unlocked — Unlocks the ROTARY KNOB.
• Disabled — Locking function is unavailable. Your ROTARY KNOB is unlocked all the time.
Setting In Keypad Lock
When and where to use: To set behavior of the rotary knob when the keypad is locked.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → In Keypad Lock.
3 Select one of the following:
Main Menu | 93
• Lock None — Scrolling and volume setting functionality is available.
• Lock Volume — ROTARY KNOB can be only used for scrolling.
• Lock Scroll — ROTARY KNOB can be only used for setting the volume.
• Lock Both — Scrolling and volume setting functionality is unavailable.
Setting Rotary Knob Wrap Around
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Wrap Around.
3 Select one of the following:
• On — Scrolling through the talkgroup list is looped or is moved to the next folder.
• Off — Scrolling through the talkgroup list stops after reaching first or last talkgroup in the current selected
folder.
Note: Only when Wrap Around is set to On and the Scroll Range is set to Scroll To Next, you are
able to scroll through all the talkgroups and folders.
Setting Rotary Knob Scroll Range
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Scroll Range.
3 Select one of the following:
• Stay In Range — Scrolling through the talkgroups in the current folder only.
• Scroll To Next — Scrolling through all the talkgroups and folders.
Note: Only when Wrap Around is set to On and the Scroll Range is set to Scroll To Next, you are
able to scroll through all the talkgroups and folders.
| | Send Feedback
Page 94
94 | Main Menu
Setting Rotary Knob Talkgroup Selection
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Confirm TG Sel..
3 Select one of the following:
• On — You need to confirm the talkgroup selection by pressing Select or pressing the PTT button to
immediately start a call on a new talkgroup.
• Off — Attaches to the selected talkgroup without any additional prompt
Setting Rotary Knob Function Keys
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Function Keys.
3 Select one of the following:
• Auto — Sets the SIDE buttons according to the Rotary Mode.
Note: If the Rotary Mode is set to:
• Dual or Volume — Display shows Auto Selected (OTB), volume can be set only through
ROTARY KNOB.
• Scroll — Display shows Auto Selected (Volume), volume can be set only through SIDE buttons.
• Volume Adjust. — Sets the SIDE buttons to adjust volume level.
• OTB Feature — Sets the SIDE buttons to the predefined One-Touch Button features.
Group Setup
This sub-menu allows you to set the scanning and my groups folder.
Scan
This menu item allows you to activate/deactivate scanning, view the active scan list, and edit the scan lists. This
feature is available only for the TMO Mode. Your radio joins any group call as long as this group is defined in the
scan list and scan is turned on.
Related Links
Activating Talkgroup Scanning on page 35
Activating Talkgroup Scanning
When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Group Setup → Scan → Scanning.
3 Select Select List and then a list name.
Your radio displays list name Selected.
4 Select Scanning → On.
Your radio is scanning on the predefined scan list.
Related Links
Send Feedback | |
Page 95
Scan on page 94
Setting Talkgroups in the Active Scan List
When and where to use: If you want to edit talkgroups in the active scan list.
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Group Setup → Scan → Active List.
Note: If Scanning is Off is displayed, go to More . . . → Group Setup → Scan → Scanning → On to
enable scanning.
3 Select View and highlight the required talkgroup.
4 Press MENU.
5 Select one of the following:
• Delete — Erases this group from the active scan list.
• Priority and select new priority to Low, Medium or High.
Setting Scan Lists
Main Menu | 95
When and where to use: If you want to set up any scan list.
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Group Setup → Scan → Scan Lists.
3 Highlight required scan list and press MENU to see additional settings:
• Rename — Enters new name for that scan list.
• Capacity — Displays the number of assigned and unassigned talkgroups for the scan list.
• Clear — Deletes all the talkgroup assigned to that scan list.
• Add Group — Adds a talkgroup to the scan list. Select one talkgroup from your talkgroup folders and assign
appropriate priority.
• Edit — Changes the priority of the required talkgroup or deletes it.
Deleting Talkgroups from Scan Lists
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Group Setup → Scan → Scan Lists.
3 Highlight the required scan list and press MENU → Edit.
4 Highlight the required talkgroup and press MENU → Delete.
My Groups
My Groups is equivalent to Favorites (next section). Both menu items contain shortcuts to favorite talkgroups and
contact numbers, as well as allow to perform the same operations. For a detailed description of the feature, please
refer to Favorites.
Favorites
Favorites contains shortcuts to frequently used talkgroups and contact numbers that are organized in favorite folders.
| | Send Feedback
Page 96
96 | Main Menu
To quickly access favorite folders, from the home screen press the up NAVIGATION key. To scroll through items inside
favorite folders, you can either use the NAVIGATION keys or the ROTARY KNOB.
Favorite Folders
Favorite talkgroups and contact numbers are stored in favorite folders. The folders are common for all types of
talkgroups and contact numbers, which means that in one folder you can have items available in different modes.
Additionally, to indicate the type of each item, the radio displays a small icon next to it.
By default the radio has one favorite folder that can store up to 128 favorite items. However, you can create two
additional folders inside Favorites and give them meaningful names reflecting their content.
If Favorites contains only one favorite folder and it is empty, the only operations you can perform are adding an item
to the folder, renaming the folder, and creating a new folder.
Favorite Talkgroups
You can add any talkgroup programmed in the radio to Favorites. The radio adjusts the mode it is in according to the
currently selected favorite talkgroup. For example, if the radio is in DMO and you select a TMO talkgroup, the radio
switches to TMO, and vice versa.
Scrolling through favorite talkgroups during an ongoing group call does not terminate the call. Also deleting a
currently selected talkgroup from Favorites during an ongoing call does not lead to the call termination.
If before powering off the last selected talkgroup was a talkgroup from Favorites, the radio:
• On powering up in DMO attaches to the last selected favorite DMO talkgroup.
• On powering up in TMO attaches to the last selected favorite TMO talkgroup.
To make a call on a favorite talkgroup, use the standard procedures for group calls described in this document.
Favorite Contact Numbers
You can add any contact number from Contacts to Favorites. In case of contacts containing more than one contact
number, you need to use the right or left NAVIGATION key to specify which particular contact number to add. There are
no limitations regarding adding single contact numbers assigned to one contact – you can add all contact numbers as
separate entries. Removing a single contact number from Contacts automatically removes it from Favorites.
Similarly, removing a contact from Contacts automatically removes all the related contact numbers from Favorites.
It is impossible to make a call to a favorite contact number during emergency operations.
Making Private Calls to Favorite Contact Numbers
Procedure:
1 To select a contact number you want to call, from the home screen do one of the following:
• Press the right or left NAVIGATION key.
• Go to Optns → TG by Folder, select the required favorite folder, and highlight the contact number.
2 When you are in the following mode:
a TMO — For a simplex call, press and release the PTT button. You hear a ringing tone. Otherwise, press and
hold the PTT button. Wait for the talk permit tone before talking, and release the PTT button to listen. For a
duplex call, press and release SEND key. You hear a ringing tone.
b DMO — Only simplex call is available. Press and hold the PTT button. Wait for the talk permit tone before
talking, and release the PTT button to listen.
3 To end the call, press the END key.
Adding Folders to Favorites
Prerequisites: Favorites contains less than three favorite folders.
Send Feedback | |
Page 97
Main Menu | 97
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Favorites.
3 Select [New Folder].
4 Enter a name and select Ok.
Adding Contact Numbers to Favorites
Procedure:
1 From the home screen, press the MENU key.
2 Select Contacts
3 Highlight a contact that you want to add to Favorites and using the left or right NAVIGATION key select the required
number.
4 Press the MENU key and select Add to Favorites.
5 Select a folder you want to add the contact number to and press Select.
Adding Talkgroups to Favorites
Prerequisites:
To add a DMO talkgroup, ensure that the radio is in DMO.
To add a TMO talkgroup, ensure that the radio is in TMO.
Procedure:
1 From the home screen, press the Optns key.
2 Select one of the following:
• TG by Folder – contains talkgroups arranged by folders.
• TG by abc – contains talkgroups arranged alphabetically.
3 Find and highlight a talkgroup that you want to add to Favorites.
4 Press the MENU key and select Add to Favorites.
5 Select a folder you want to add the talkgroup to and press Select.
Related Links
Entering DMO Mode on page 50
Managing Folders in Favorites
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Favorites.
3 Highlight a required folder.
4 Press the MENU key.
5 Select one of the following:
• Rename Folder – changes the name of the folder. Enter a new folder name and press Ok.
• Delete Folder – removes the selected folder from Favorites. Press Yes to confirm deletion.
Note: You cannot delete the last favorite folder or a folder that contains at least one non-erasable
item.
| | Send Feedback
Page 98
98 | Main Menu
Deleting Items from Favorites Folder
When and where to use: To delete a single contact number or a talkgroup from a favorite folder.
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Favorites.
3 Select a folder containing the item you want to remove.
4 Highlight the item and select Delete. Press Yes to confirm deletion.
Deleting All Items from Favorite Folders
When and where to use: To delete all contact numbers and talkgroups stored in a favorite folder.
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Favorites.
3 Select a required folder.
4 Press the MENU key and select Delete All. Press Yes to confirm deletion.
My Info
This sub-menu allows you to view your own private, phone, and radio info.
Viewing and Modifying Personal Information
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → My Info.
3 Select one of the following:
• My Private Num – displays your radio private number.
• My Phone Num – displays your radio phone number.
Note: To modify the displayed phone number, select Edit. Type the number and press Ok.
• Radio Info – displays radio information: manufacturer, product type, ISSI, TEI, Serial Number, and OPTA.
Note: OPTA information is optional.
Recent Calls
You can view the history of all calls:
• Dialed — calls you initiated.
• Received — calls you answered.
• Missed — calls you received but not answered or rejected.
Each list of calls may contain up to 50 numbers, the most recent call being at the top of the list. If the number of a
recent call is stored in the contact list, the name associated with the number appears in the recent calls list. A number
dialed more than once, appears only once in the list.
Send Feedback | |
Page 99
Viewing Recent Calls
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Recent Calls.
3 Select one of the following:
• Dialed
• Received
• Missed
4 Select a required call from the list.
5 Press the MENU key.
6 Select View.
Suggestion: Press down NAVIGATION key to bypass first two steps.
Note: Call time information is only available if the time and date are set in the radio. Call duration is
not available in the missed calls list.
Main Menu | 99
Calling from Recent Calls
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Recent Calls.
3 Select one of the following:
• Dialed (from the home screen press SEND key to access Dialed Calls list)
• Received
• Missed
Note: From the home screen press down NAVIGATION key, to access Recent Calls menu item.
4 Highlight the required call and press the PTT button for private calls or press theSEND key to make a phone call.
Note: Phone calls are only available in TMO Mode.
Storing Recent Calls to Contacts
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Recent Calls.
3 Select Dialed, Received or Missed.
4 Press Store.
Note: If Store is not assigned to the left SOFT key, the number is already stored in your contact list.
5 To store the number as a new entry, select [New Contact]. Or, to store the number to an existing entry, select the
entry, and press View then select Edit.
6 With the contact type field highlighted, scroll left or right to display the contact type you want to assign the
number.
7 Select Done.
| | Send Feedback
Page 100
100 | Main Menu
Deleting Recent Calls
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Recent Calls.
3 Select Dialed, Received or Missed.
4 Press MENU on the required call.
5 Select Delete.
Note: To erase all the calls, select Delete All.
Shortcuts
This sub-menu allows you to set up shortcuts to access frequently used menu items.
Creating Menu Shortcuts
When and where to use: To assign a shortcut for the menu item.
Procedure:
1 From the home screen, press the MENU key.
2 Scroll to the item you want as a shortcut.
3 Press and hold MENU when the item is highlighted.
Example:
Creating a shortcut to the All Tones options.
1 From the home screen, press the MENU key.
2 Select Setup → Tones.
3 Highlight All Tones and press and hold MENU until Assign Shortcut for:All Tones is
displayed.
4 Select Yes and ShortcutsKey:1 is displayed.
5 Press Done.
Note: To use this shortcut, from the home screen, press MENU and the key 1.
Editing Menu Shortcut Lists
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Shortcuts.
3 Highlight a required shortcut and press MENU.
4 Select one of the following:
• Edit — Changes the assigned key. Type required number and press Ok.
Note: Type a number between 1–20.
• Delete — Erases highlighted shortcut. Select Yes to confirm.
Send Feedback | |
Loading...