Motorola MT7711 User Manual
Quick Start
24x8 Cable
Modem
Plus AC1900
Router
MG7700
Packaged with your MG7700 modem/router
Power Cube Coax Wrench
Ethernet Cable Velcro® Cable
Para una Guía de Inicio Rápido en
español, por favor vaya a
www.motorolacable.com/MG7700IR
Organizer
Let’s get started
If you don’t have cable Internet service, please order that from your
cable service provider.
Now connect your MG7700 as shown on the next panel.
Connecting to a Coax Cable
Soon you’ll need to connect your MG7700 to a “live”
coax cable. Sometimes a cable will already be
available. Sometimes there’s a coax wall jack
available, and you connect to the jack with a coax
cable. Your MG7700 can also share a coax cable
attached to a TV by using a coax splitter.
ON/OFF button
POWER
Connect the supplied
power cube between the
power jack and an
electrical outlet.
ETHERNET (LAN 1-4)
You can connect a
computer, HDTV, game
station, or other
Ethernet-capable device
to any of these 4 LAN
ports.
RESET
WPS button
COAX
Connect a “live” coax
cable to the modem’s
COAX connector as
discussed above.
(Tighten the nut so it’s
finger tight. You may
want to use the supplied
wrench. Make the
connection snug but not
over-tight.)
Prepare to activate
By now you should have:
Subscribed to cable Internet service.
Connected your MG7700.
Powered up your MG7700. To do this, the On/Off button needs to be
On. Wait for the green online connection light to stop flashing and
remain solidly lit. This may take up to 15 minutes.
You should have a recent cable bill handy because it has your
account number and you’ll probably need that.
If you’re asked for information about the MG7700, you can find this on
the label on the bottom of the MG7700.
Activate
For some service providers, you activate by calling them. Many
service providers including Comcast and Cox prefer that you activate
by opening the Web browser of a computer that’s plugged into one of
the MG7700’s Ethernet ports.
If you don’t have a computer, you can use the Web browser of a WiFi device such as a smartphone or tablet. In that case you’ll need the
unique Wireless Network Name and Password printed on the bottom
of your MG7700. You’ll use these in setting up your wireless device to
connect to the MG7700. Once you’ve connected, you can open the
browser of that wireless device.
Loading...