MOTOROLA MPC603ERX100LN, MPC603ERX133LN, MPE603ERX100LN, MPE603ERX133LN, MPC603EFE100LN Technical data
...
( ° C)
±
查询MPC603ERX100LN供应商
ª
Application-SpeciÞc Information
PID6-603e_N PNS 980521
Motorola Part Numbers Affected:
MPC603ERX100LN MPC603ERX133LN
MPE603ERX100LN MPE603ERX133LN
MPC603EFE100LN MPC603EFE133LN
MPE603EFE100LN MPE603EFE133LN
MPC603ERX100TN MPC603ERX133TN
MPC603EFE100TN MPC603EFE133TN
PowerPC
603e
ª
RISC Microprocessor Family:
PID6-603e (Stretch) Part Number SpeciÞcations
This document deÞnes a unique part number for a PowerPCª 603e microprocessor manufactured by Motorola. It describes changes
to recommended operating conditions and revised electrical speciÞcations, as applicable, from those described in the
Hardware SpeciÞcation
SpeciÞcations provided in this data sheet supercede those in Revision 1 (11/96) of the
(order #: MPC603EC/D); speciÞcations not addressed herein are unchanged.
Note that headings and tables in this data sheet are not numbered; however, they are intended to correspond directly to the heading
or table affected in the general hardware speciÞcations. Any additional information (including tables) not included in the hardware
speciÞcations are noted.
Part numbers addressed in this document and a summary of their differences from the general speciÞcation are listed in the following
table. For more detailed ordering information see ÒOrdering Information for the PowerPC 603eÓ on page 4.Feature Changes
Motorola Part
Number
MPC603ERX100LN 100 MHz 3.3 V ± 5% 0 to 105 ModiÞed AC spec, BGA package
MPC603ERX133LN 133 MHz 3.3 V ± 5% 0 to 105 ModiÞed AC spec, BGA package
MPC603EFE100LN 100 MHz 3.3 V ± 5% 0 to 105 ModiÞed AC spec, QFP package
MPC603EFE133LN 133 MHz 3.3 V ± 5% 0 to 105 ModiÞed AC spec, QFP package
MPE603ERX100LN 100 MHZ 3.3 V ± 5% 0 to 105 ModiÞed AC spec, BGA package
MPE603ERX133LN 133 MHz 3.3 V ± 5% 0 to 105 ModiÞed AC spec, BGA package
MPE603EFE100LN 100 MHz 3.3 V ± 5% 0 to 105 ModiÞed AC spec, QFP package
MPE603EFE133LN 133 MHz 3.3 V ± 5% 0 to 105 ModiÞed AC spec, QFP package
MPC603ERX100TN 100 MHz 3.3 V ± 5% -40 to 105 ModiÞed thermal spec, extended temperature range, BGA
MPC603ERX133TN 133 MHz 3.3 V
.
PID6-603e Hardware SpeciÞcations
Part Numbers Addressed by this Part Number Specification
Operating Conditions
CPU
Frequency
Vdd T
5% -40 to 105 ModiÞed thermal spec, extended temperature range, BGA
J
(low frequency operation restricted to 80MHz minimum)
(low frequency operation restricted to 120MHz minimum)
(Low frequency operation restricted to 80MHz minimum)
(low frequency operation restricted to 120MHz minimum)
(ßoating point not supported, low frequency operation
restricted to 80MHz minimum)
(ßoating point not supported, low frequency operation
restricted to 120MHz minimum)
(ßoating point not supported, low frequency operation
restricted to 80MHz minimum)
(ßoating point not supported, low frequency operation
restricted to 120MHz minimum)
package
package
SigniÞcant Differences
PID6-603e
PID7v-603e Apple-Only Data Sheet
The PowerPC name is a registered trademark and the PowerPC logotype and PowerPC 603e are trademarks of International Busines Machines
Corporation, used by Motorola under license from International Business Machines Corporation.
This document contains information on a new product under development by Motorola. Motorola reserves the right to change or discontinue this product
without notice.
© Motorola Inc., 1998. All rights reserved.
( °
Part Numbers Addressed by this Part Number Specification (Continued)
Operating Conditions
Motorola Part
Number
MPC603EFE100TN 100 MHz 3.3 V ± 5% -40 to 105 ModiÞed thermal spec, extended temperature range, QFP
MPC603EFE133TN 133 MHz 3.3 V ± 5% -40 to 105 ModiÞed thermal spec, extended temperature range, QFP
CPU
Frequency
Vdd T
C)
J
package
package
SigniÞcant Differences
Feature Changes
This section summarizes signiÞcant feature changes between the revision of the 603e addressed by this document and the previous
widely available revision 1.4.1 (XPC603ERXnnnLJ or XPC603EFEnnnLJ where nnn is the core frequency).
This revision Þxes numerous errata which existed on the earlier revision but added no new features.
Errata
This section summarizes design defects or errors (errata) that are known to exist on this revision of the 603e. There may be additional
errata that are not known or are not yet documented here which may cause the part to deviate from the functional description
provided in the
website at http://www.mot.com/SPS/PowerPC/ for the latest version of this Part Number SpeciÞcation or to your local Motorola
sales ofÞce for later and/or more detailed description of the errata.
The known errata as of the date of this document are summarized below.
MPC603e & EC603eª RISC Microprocessor UserÕs Manual (order # MPC603EUM/AD Rev 1). Refer to the
# Problem Description Impact Solutions
1
Snoop causes cancelled
speculative load to corrupt
GPR/FPR.
2
Snoop copyback causes
every tenth dcbi to fail.
A snoop that hits to a pending but cancelled copy back
address can cause wrong
data to be loaded into a
GPR/FPR.
A snoop which causes a
copyback and occurring in a
one cycle window near every
tenth dcbi causes the dcbi to
fail to invalidate the cache.
All systems that use hardware coherency along with
speculative loads.
Only systems using both
software and hardware
coherency simultaneously
are affected.
Set G=1 to pages loaded
from during snooping.
After each dcbi, place an
additional dcbi to the same
address.
Electrical and Thermal Characteristics
This section provides any changes to the AC and DC electrical speciÞcations and thermal characteristics for the PID6-603e parts
described herein.
DC Electrical Characteristics
The following table describes the changed thermal operating conditions for the PID6-603e part numbers described herein.
Recommended Operating Conditions
Characteristic Symbol Value Unit Notes
Junction temperature Tj -40 to 105 ¼C 1
Note: 1. Parts with TN sufÞx only.
2 PID6-603e Part Number Specifications
PRELIMINARYÑSUBJECT TO CHANGE WITHOUT NOTICE
£
±
±
m
AC Electrical Characteristics
The AC timing speciÞcations described in the PID6-603e Hardware SpeciÞcation s include 100MHz, 120MHz, and 133MHz.
Motorola has discontinued the 120MHz offering for the revision described herein. Customers desiring to operate at 120MHz are
encouraged to purchase the 133MHz part. This section provides any other AC electrical characteristics that have been changed for
this revision.
Clock AC SpeciÞcations
The following table provides the revised clock AC timing speciÞcations for the parts described herein
Note that the minimum core frequency has been raised from the 16.67MHz value in the Hardware SpeciÞcation to 80MHz.
Some parts of this revision manufactured recently will not operate that slowly.
Clock AC Timing Specifications
Vdd = AVdd = 3.3 ± 5% V dc, OVdd = 3.3 ± 5% V dc, GND = 0 V dc, 0 £ T
Num Characteristic
Processor frequency 80 100 120 133.33 MHz 1
VCO frequency 100 200 133.33 266.66 MHz 1
SYSCLK (bus) frequency 16.67 66.67 16.67 66.67 MHz
1 SYSCLK cycle time 15.0 60.0 15.0 60.0 ns
2,3 SYSCLK rise and fall time Ñ 2.0 Ñ 2.0 ns 2
4 SYSCLK duty cycle measured at 1.4 V 40.0 60.0 40.0 60.0 % 3
SYSCLK jitter Ñ
Internal PLL relock time Ñ 100 Ñ 100
Notes :
1. Caution : The SYSCLK frequency and PLL_CFG[0Ð3] settings must be chosen such that the resulting
SYSCLK (bus) frequency, CPU (core) frequency, and PLL (VCO) frequency do not exceed their
respective maximum or minimum operating frequencies. Refer to the PLL_CFG[0Ð3] signal
description in the hardware speciÞcations for valid PLL_CFG[0Ð3] settings.
2. Rise and fall times for the SYSCLK input are measured from 0.4 V to 2.4 V.
3. Timing is guaranteed by design and characterization, and is not tested.
4. Cycle-to-cycle jitter, and is guaranteed by design.
5. Relock timing is guaranteed by design and characterization, and is not tested. PLL-relock time is the
maximum amount of time required for PLL lock after a stable Vdd and SYSCLK are reached during the
power-on reset sequence. This speciÞcation also applies when the PLL has been disabled and
subsequently re-enabled during sleep mode. Also note that HRESET must be held asserted for a
minimum of 255 bus clocks after the PLL-relock time during the power-on reset sequence.
105 ° C
j
100 MHz 133.33 MHz
Min Max Min Max
150 Ñ
150 ps 4
Unit Notes
s 3, 5
PID6-603e Part Number Specifications 3
PRELIMINARYÑSUBJECT TO CHANGE WITHOUT NOTICE
Ordering Information
The following table provides the ordering information for the PID6-603e part numbers described herein.
Ordering Information for the PowerPC 603e
Package
Type
240
CQFP
255
CBGA
Device
Process Mask Code
Rev
4.1 PPC1.3 01H49P 100 MPC603EFE100LN
4.1 PPC1.3 71H49P 100 MPC603ERX100LN
CPU Frequency
(MHz)
133 MPC603EFE133LN
100 MPE603EFE100LN
133 MPE603EFE133LN
100 MPC603EFE100TN
133 MPC603EFE133TN
133 MPC603ERX133LN
133 MPE603ERX133LN
100 MPE603ERX100LN
100 MPC603ERX100TN
133 MPC603ERX133TN
Part Number
Motorola
4 PID6-603e Part Number Specifications
PRELIMINARYÑSUBJECT TO CHANGE WITHOUT NOTICE
Part Marking
This section provides information on Motorola device marking standards. Parts are marked as the example shown below.
MPC603ERX100LN
µ
µ
MPC603EFE100LN
MMMMMM YWWLA
MMMMMM ATWLYYWWA CCCCC
CQFP
Notes:
MMMMMM is the 6-digit mask code
ATWLYYWWA or YWWLA is the traceability code
CCCCC is the country of assembly (this space is left blank if parts are assembled in the United States)
Motorola Part Marking for CQFP and BGA Devices
BGA
Extended temperature parts are marked as shown below.
MPC603ERX100TN
µ
µ
MPC603EFE100TN
MMMMMM YWWLA
MMMMMM ATWLYYWWA CCCCC
CQFP
Notes:
MMMMMM is the 6-digit mask code
ATWLYYWWA or YWWLA is the traceability code
CCCCC is the country of assembly (this space is left blank if parts are assembled in the United States)
Motorola Part Marking for Extended Temperature CQFP and BGA Devices
Information in this document is provided solely to enable system and software implementers to use PowerPC microprocessors. There are no express or implied copyright licenses granted
hereunder to design or fabricate PowerPC integrated circuits or integrated circuits based on the information in this document.
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation consequential or incidental damages. ÒTypicalÓ parameters can and do vary in different applications. All operating parameters, including ÒTypicalsÓ must be validated
for each customer application by customerÕs technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed,
intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application
in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended
or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages,
and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/AfÞrmative Action Employer.
IBM is a registered trademark of International Business Machines Corporation.
The PowerPC name is a registered trademark and the PowerPC logotype and PowerPC 603e are trademarks of International Busines Machines Corporation, used by Motorola under
license from International Business Machines Corporation.
BGA
Copyright © Each Manufacturing Company.
All Datasheets cannot be modified without permission.
This datasheet has been download from :
www.AllDataSheet.com
100% Free DataSheet Search Site.
Free Download.
No Register.
Fast Search System.
www.AllDataSheet.com
Loading...