Page 1
M68CPA08QF80UM/D
Version 1.0
June 24, 2003
User’s Manual
© Motorola, Inc., 2003
M68CPA08QF80
Programming Adapter
User’s Manual
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
Page 2
M68CPA08QF80 Programming Adapter - Version 1.0 User’s Manual
2 MOTOROLA
Important Notice to Users
While every effort has been made to ensure the accuracy of all information in
this document, Motorola assumes no liability to any party for any loss or
damage caused by errors or omissions or by statements of any kind in this
document, its updates, supplements, or special editions, whether such errors are
omissions or statements resulting from negligence, accident, or any other cause.
Motorola further assumes no liability arising out of the application or use of any
information, product, or system described herein: nor any liability for incidental
or consequential damages arising from the use of this document. Motorola
disclaims all warranties regarding the information contained herein, whether
expressed, implied, or statutory, including implied warranties of
merchantability or fitness for a particular purpose. Motorola makes no
representation that the interconnection of products in the manner described
herein will not infringe on existing or future patent rights, nor do the
descriptions contained herein imply the granting or license to make, use or sell
equipment constructed in accordance with this description.
Trademarks
This document includes these trademarks:
Motorola and the Motorola logo are registered trademarks
of Motorola, Inc.
Windows is a registered trademark of Microsoft Corporation in the U.S.
and other countries.
Intel is a registered trademark of Intel Corporation.
Motorola, Inc., is an Equal Opportunity / Affirmative Action Employer.
For an electronic copy of this book, visit Motorola’s web site at http://e-www.motorola.com/
© Motorola, Inc., 2003; All Rights Reserved
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
Page 3
User’s Manual M68CPA08QF80 Programming Adapter - Version 1.0
MOTOROLA M68CPA08QF80 Quick Start Guide 3
User’s Manual — M68CPA08QF80 Programming Adapter
M68CPA08QF80 Quick Start Guide
The M68CPA08QF80 is a low-cost programming adapter for HC08 family
MCUs. It is designed to work with programmers that use a 16-pin MON08
interface. It supports 80-pin 0.5mm QFP and 80-pin 0.65mm QFP packages.
1 - Connect wire jumpers
MON08 connector J3 has the same pin signals as connector J2. You must
connect up to 16 supplied jumpers from J3 to J1 and J4 for either package type.
These jumpers provide power and programming signals to the MCU.
Connections will vary depending on the specific device you are using. Refer to
the device data sheet and the programer documentation for connection
information.
2 - Insert a device to be programmed
Be sure that power is removed before inserting a device. Socket U1 is used for
80-pin 0.5mm QFP devices and socket U2 for 80-pin 0.65mm QFP devices.
Open the desired socket and insert device. You should not use force when
closing the socket lid. Close the socket latch to secure the device.
3 - Connect the MON08 programmer and program the device
Connect a MON08 programmer to connector J2 of the programming adapter
board. Be sure to verify that pin one of the programmer connects to pin one of
connector J2. You may now use the programmer to program the inserted device.
Refer to your programmer documentation for further operating instructions.
Once the programmer indicates that the device has been properly programmed
you may open the socket and remove the device.
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
Page 4
Freescale Semiconductor, Inc.
nc...
I
cale Semiconductor,
Frees
For More Information On This Product,
Go to: www.freescale.com
Page 5
Freescale Semiconductor, Inc.
nc...
I
Approval Date:06/02/03
cale Semiconductor,
Frees
LABEL, PART NUMBER/REVISION 1"x 0.25"
PRINTED WITH "RE11340B REV O" VENDOR
QFP80_PSOC_5M
M_ENP SKT 0.5mm 80 PINS Enplas FPQ-80-0.5-04
QFP80_PSOC_65M
M_ENP SKT 0.65mm 80 PINS Enplas FPQ-80-0.65-02B
BILL OF MATERIALS - DRAWING NO. 01A11340B REV O for PWB P/N RE11340B contained in MPN: M68CPA08QF80
1 1 C1 C300_CKR23 CAP CER 0.1uF 50V 20% Z5U TH Kemet C410C104M5U5CA --
2 2 J1,J4 HDR220 HDR 2X20 TH 100mil CTR 330H Au SAMTEC TSW-120-07-S-D --
3 1 J2 HDR208_4W HDR 2X8 TH 100mil CTR 330H Au SHRD Samtec TST-108-01-S-D --
4 1 J3 HDR208 HDR 2X8 TH 100mil CTR 330H Au Samtec TSW-108-08-G-D --
ITEM QTY REF DES JEDEC DESCRIPTION MFGR PART NUMBER NOTES
5 2 J5,J6 HDR105 HDR 1X5 TH 100mil CTR 330H Au Berg 68001-605 --
6 3 R1-R3 R600_MF50 RES TF 0 Ohm 1/4w 5% Yageo/DigiKey ZOR-25-R/ 0.0QTR-ND --
71U1
81U2
9 1 N/A
For More Information On This Product,
Go to: www.freescale.com
10 1 N/A THA BARE BOARD (P/N RE11340) DDI RE11340F REV O
Motorola / Metrowerks B11340.xls Page 2 OD 2
Page 6
HOW TO REACH US:
World Wide Web Address
Motorola: http://e-www.motorola.com
Information in this document is provided solely to enable system and software
implementers to use Motorola products. There are no express or implied copyright licenses
granted hereunder to design or fabricate any integrated circuits or integrated circuits based
on the information in this document.
Motorola reserves the right to make changes without further notice to any products herein.
Motorola makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does Motorola assume any liability arising out of
the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation consequential or incidental damages. “Typical”
parameters which may be provided in Motorola data sheets and/or specifications can and
do vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. Motorola does not convey any license under its patent rights
nor the rights of others. Motorola products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the
Motorola product could create a situation where personal inju ry or death may occur. Should
Buyer purchase or use Motorola products for any such unintended or unauthorized
application, Buyer shall indemnify and hold Motorola and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark Office.
digital dna is a trademark of Motorola, Inc. All other product or service names are the
property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative
Action Employer.
© Motorola, Inc. 2003
M68CPA08QF80UM/D
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
Loading...