Congratulations on purchasing an LS750 pager. Your new pager provides
exciting capabilities in messaging and can become a vital part of your
business and personal life. This compact pager combines messaging and
time keeping functions in a package that is conv enient to carry.
If your LS750 has the f symbol, it uses FLEX™ technology . The Motorola
FLEX protocol-based pagers offer extended battery life and improv ed
paging reliability .
To fully understand the features this pager offers, please take a fe w
minutes to read this user’s guide. This user’s guide also includes a
detachable quick reference card on the bac k cov er.
Effective Use of Your Pager
Y our pager can help y ou keep in contact with ev eryone important to you. By
giving your pager number to your business associates , f amily, and friends,
you can be contacted whenever needed.
If you have a cellular phone, giv e y our pager number instead of y our
cellular number. Then you can decide who to call back on your cellular
phone without paying for incoming calls.
INTRODUCTION
1
Battery Information
(+)
(-)
Battery
Compartment
Your pager operates with one AAA-size
alkaline battery (carbon zinc batteries are not
recommended).
Installing/Replacing the Battery
Turn the pager off. Refer to “Turning Your
➊
Pager Off” on page 6.
Locate the battery door on the back of the
➋
pager.
Slide the battery door in the direction of the arrow to unlatch the battery
➌
door.
Lift the battery door up to open.
➍
Remove the old battery , noting the polarity.
➎
GETTING STARTED
2
Position the new battery so the + and - markings on the battery match
➏
the polarity markings in the battery compartment.
Close the battery door.
➐
Slide the door until it is fully closed.
➑
Check your pager’s clock time after replacing the battery.
Note:
Sending a Test Page to Yourself
After you have read this guide and y our pager has been activated b y y our
service provider, send yourself a test page. Ref er to “Functionality and Use
of Your Pager” on page 37.
GETTING STARTED
3
Control Buttons
c
GETTING STARTED
4
Menu
Button
Read Button
d
MenuUsed to access pager menus and to turn on the
ReadUsed to turn the pager on, read messages, and
f
SelectUsed to select pager settings and features. Also
backlight.
navigate through menus.
used to read additional screens of messages.
Select
Button
Turning Your Pager On
m00:00o00/08hjlbe
MOTOROLA
m03:30o07r05h jlbe
NEW! =
m03:30o07r05h jlbe
Press c. The start-up screens are
➊
displayed and your pager activ ates the
power on chime (when in audible mode).
Press any button to stop the alert.
➋
The unread message screen is
displayed.
When your pager is on and no activity
is taking place, the Standby screen is
displayed. The Standby screen
displays the time and date and may
display other status indicators.
GETTING STARTED
5
Turning Your Pager Off
From the Standby screen, press d twice.
m53 :70o07r05hjlbe
PAGER OFF
m03:30o07/05hjlbe
OFF
m03:30o07r05hjlbe
➊
Press and release c until
➋
displayed, then press f.
is displayed momentarily before
OFF
the pager shuts off, and m is removed
from the display.
The off screen displays the time and
date, and if an alarm is set, the alarm
indicator.
Backlight
In low-light conditions, press and hold d for 2 seconds to turn on the
pager’s backlight. The backlight turns off automatically after the pager
GETTING STARTED
returns to the Standby screen.
6
PAGER OFF
is
Setting up Your Pager
This section gives instructions for setting the time and date and Private
Time. Access to these f eatures is obtained through the Setup Pager menu.
Setting the Time and Date
From the Standby screen, press d twice.
m63 :70o07/05hjlbe
SETUPPAGER
m13 :20o07/05hjlbe
TIME/DATE
m13:20o07/05hjlbe
FORMAT!AM/PM
➊
Press and release c until
➋
PAGER
is displayed.
➌ Press f.
TIME/DATE is displayed.
➍ Press f.
FORMAT!AM/PM or FORMAT!24HR is
displayed.
SET UP
GETTING STARTED
7
m13:20o07/05hjlbe
TIME! =2:00A
m13:20o07/05hjlbe
TIME! 03:00A
m13:20o07/05hjlbe
TIME! 03:30P
TIME AND DATE
8
➎ Press and release c until your choice
of FORMAT!AM/PM (for AM/PM time), or
FORMAT!24HR (for 24-hour time) is
displayed, then press f.
The screen used to set the time is
displayed with the hour digits flashing.
➏ Press c until the correct hour is
displayed, then press f.
➐ Repeat Step 6 to set the minutes and AM/
PM fields (if AM/PM time was selected
above).
m13:20o07/05hjlbe
DATE! 07/01
m13:20o07/05hjlbe
DATE! 07/05
m13:20o07/05hjlbe
SET
After the time has been set, the screen
used to set the date is displayed.
➑ Press and release c until the correct
month is displayed, then press f.
➒ Press and release c until the correct
day is displayed, then press f.
SET is displayed momentarily.
TIME AND DATE
9
To Turn Private Time On
You can set a time period during which your pager still receives messages
but it will not alert. Y our pager goes into the Priv ate Time mode daily until it
is turned off.
m63 :70o07/05hjlbe
SETUPPAGER
m23 :70o07/05hjlbe
PRIVATE TIME
m23:70o07/05hjlbe
PRIVATE OFF
PRIVATE TIME
➊ From the Standby screen, press d twice.
➋ Press and release c until SET UP
is displayed.
PAGER
➌ Press f, then press c.
PRIVATE TIME is displayed.
➍ Press f.
PRIVATE OFF or PRIVATE ON is
displayed depending on the current
setting.
10
m23:70o07/05ujlbe
PRIVATE ON
m23:70o07/05ujlbe
START!03!00A
m23:70o07/05ujlbe
START!03!30P
m23:70o07/05ujlbe
END! =2!00P
➎ Press and release c until PRIVATE ON
is displayed, then press f.
The screen used to set the start time
is displayed.
➏ Press and release c until the desired
start hour is displayed, then press f.
➐ Repeat Step 6 to set the min utes and
AM/PM fields (if your pager’s cloc k is set
to AM/PM time).
The screen used to set the stop (END)
time is displayed.
PRIVATE TIME
11
m23:70o07/05ujlbe
END! 05!00P
m23:70o07/05ujlbe
SET
To Turn Private Time Off
m23:70o07/05hjlbe
PRIVATE OFF
PRIVATE TIME
12
➑ To set the stop time, follow the same
procedure used to set the start time.
When finished, SET is displayed
momentarily.
When your pager has entered the
private time mode, s replaces the
alert mode indicator.
➊ Follow steps 1 through 4 in “To Turn
Private Time On” on page 10.
➋ Press and release c until PRIVATE OFF
is displayed, then press f.
The START screen is displayed
momentarily.
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.