BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H385 Headset.
motorola
H385
Quick Start Guide
1
Your Headset's Battery
CHARGE
2
Volume
Buttons
Earhook
Speaker
Power Button
Microphone
Call Button
Indicator
Light
START BLUETOOTH
FEATURE
Charging
Por t
Plug the Motorola charger into the end of
1
the headset.
The indicator light turns on when the
battery is charging. It may take up to 30
seconds for the light to turn on. When the
headset's battery is fully charged (about 3
hours), the indicator light is steadily lit in
blue.
Unplug the charger from the headset.
2
Note: Headset is not functional while charging.
Your Phone
Your phone's Bluetooth® feature is off by
default. To use your headset, you must turn on
the Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
Press (
1
M
Menu) > Settings > Connection >
Bluetooth Link > Setup.
2
Scroll to Power.
3
Select Change.
Scroll to On.
4
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
3
PAI R
Your Headset
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Power on headset by pressing the Power
button to initiate easy pairing. After a few
moments, the indicator light will be steadily lit
in blue to indicate headset is in pairing mode.
Power
Button
Indicator Light
(steadily blue
for pairing mode)
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809516A51-O
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2007.
3
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
On your Motorola phone, press (
1
PAIR
CONTINUED
Your Phone
M
Menu) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H385.
2
Select OK or Ye s to pair your headset with
3
your phone.
Enter the passkey: 0000
4
Select OK.
5
When your headset successfully pairs with
your phone, the indicator light flashes purple
and blue.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
4
Your phone and headset are now paired and
connected to make and receive calls.
To make a call:
Place headset ear bud on your ear with the
1
earhook also securely fitted over your ear.
On the phone, dial the number you want to
2
call and press SEND key on your phone.
If your phone and headset are successfully
3
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, turn OFF the
headset when you don't use it for an
extended time by pressing and holding the
Power button.
TEST AND USE
USING YOUR H385
TROUBLESHOOTING
See
Features and
Functions Guide
on the reverse side
for information on
using your H385
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, first turn off the
other device, then turn your headset off and on.
The indicator light becomes steadily lit in blue
indicating the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
Features and
Functions Guide
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
TURNING HEADSET
ON AND OFF
To turn your headset on, press and hold
the Power button until the indicator light
flashes.
To turn your headset off, press and hold
the Power button until the indicator light
flashes rapidly and then turns off.
Power Button
Indicator
Light
of this guide
to complete initial setup
of your H385.
WEARING THE HEADSET
CHANGING FOR USE
Your H385 headset is supplied with both roundand oval-shaped earbuds to provide personal
choice for maximum comfort.The earbud is fitted
onto the end of your headset’s earpiece speaker,
and placed onto your ear when using your
headset as shown.
To wear your headset, flex the earhook and
loop it over your ear as shown.
ON OTHER EAR
You can wear your H385 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
Firmly lift and pull the
1
top of the earhook up
and off speaker stem
as shown.
Flip the headset over.
2
Firmly attach the
3
earhook to the speaker
stem as shown.
CHANGING VOLUME
BUTTON ORIENTATION
You can also change the orientation of the
volume buttons on your headset.
Turn the headset power off.
1
Press and hold the Volume button you
2
want to assign as the "volume up" button
and the Power button to power on the
headset. The indicator light flashes three
times in blue.
Power Button
Volume Buttons
European Union Directives Conformance
Statement
Hereby, Motorola declares that
this product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Product
Approval
Number
MAKING CALLS
CHECKING BATTERY LEVEL
Function Action
Make a voice dial call Tap the Call button
and speak the
name after the tone
End a call Tap the Call button
Answer a call Tap the Call button
Ignore a call Press and hold either
Volume button until
incoming call stops
ringing
Redial last call Press and hold the
Call button for at least
2 seconds until you
hear a beep
Mute or unmute a call Tap both Volume
buttons
Note: Some features are phone/network dependent.
Note: Your H385 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which profile
your phone supports. See your phone's user's guide for more
information.
To check battery level while headset is powered on,
press and hold both volume buttons for 5 seconds
until you hear a beep. The indicator light displays the
following charge status for a few seconds.
Indicator Light Charge Level
Red Battery at less than
10% charge
Purple Battery at between
10% and 80% charge
Blue Battery at more than
80% charge
Indicator Light Charge Status
Red Charging (battery
level less than 10%
charge)
Purple Charging (battery
level more than 10%
charge)
Blue Charging complete
CHARGING STATUS
With the Charger Plugged In
OPERATING STATUS
With No Charger Plugged In
Indicator Light Headset Status
Off Power off
Three blue flashes Powering on/off
Steady blue Pairing mode
Rapid blue/purple flashes Pairing/connect
successful
Quick blue flash Incoming/outgoing call
Slow blue flash Connected (on a call)/
Standby (not on a call)
Slow red flash Idle (not connected
to phone)
Slow purple flash Connected call muted
Quick red flash Low battery
Note: After 30 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
AUDIO TONES
Audio Tone Headset Status
Ascending tone Powering on
Descending tone Powering off
Two ascending Pairing successful
tones
Ring tone Incoming call
Two short tones when Volume at minimum
pressing Volume button or maximum
High/low tones Low battery
repeated every 60 sec.
No audio indications; Out of range
deteriorating quality
Three ascending tones Connected call
Three descending tones Ended call
Two rapid ascending Mute enabled
tones
Two rapid descending Mute disabled
tones
Loading...