Motorola H15 User Manual
d
m
w
BEFORE Y
O
s
Before using this product, read the Important Safety an
Take a moment before you get started to fa
H15 Bluetooth® Handsfree Headset. Along
provided for both charging and storage.
MOTOPURE™
H15
Quick Start Guide
U BEGIN
Legal Information pamphlet and follow its instructions.
iliarize yourself with your new MOTOPURE
ith your headset, a desktop charger is
Volume Up
Button
Speaker
Multi-Color
Indicator Light
Volume Down
Call
Button
1
Your Headset's Battery
You need to charge your headset using the
included travel charger or desktop charger.
Charging with travel charger:
CHARGE
Button
Boom
Power
Indicator
Light
Headset Charging
Connector
Charger
Port
START HERE >
Remove plastic seal off of ear cushion on
1
speaker.
Plug the Motorola charger into the end of the
2
headset.
The indicator light turns red when the battery i
charging. It may take up to 1 minute for the
indicator light to turn on. When the headset's
battery is fully charged (about 2 hours), the
indicator light turns green.
Disconnect the charger.
3
Note: Headset is not functional while charging with travel
charger.
Charging with desktop charger:
r.
e
2
Plug in the travel charger into the charger port.
1
Plug the headset into the port on the desktop
2
charger as shown.
The desktop charger light is lit, and the headset
indicator light turns red when the battery is
charging. It may take up to 1 minute for the
headset indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the headset indicator light turns green.
Remove headset from charger when ready to
3
use.
Note: Headset is functional while charging with desktop
charger with the boom open. To operate, remove from charge
Note: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
2
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
M
Press (
1
Bluetooth Link > Setup.
2
Scroll to Power.
3
Select Change.
Scroll to On.
4
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn it off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Menu) > Settings > Connection >
3
Your Heads
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Open the headset boom to power on the
headset and initiate pairing. The indicator light
first flashes during power up, then initiates
easy pairing. After a few moments, the
indicator light will be steadily lit in blue to
indicate headset is in pairing mode.
Indicator Light
(steadily blue
for pairing mode)
PA
IR
t and Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
On your Motorola phone, press (
1
Settings > Connection > Bluetooth Link > Handsfree
> Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H15.
2
Select OK or Ye s to pair your headset with
3
your phone.
Enter the passkey: 0000
4
Select OK.
5
When your headset successfully pairs with
your phone, the indicator light flashes
purple and blue.
M
Menu) >
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Motorola, Inc.
Motorola, Inc.
Consumer Advocacy Office
Consumer Advocacy Office
1307 East Algonquin Road
1307 East Algonquin Road
Schaumburg, IL 60196
Schaumburg, IL 60196
www.motorola.com
www.hellomoto.com
1-877-MOTOBLU
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
hearing impaired)
Guide Number: 68000240001-A
Guide Number: 6809500A86-O
Bluetooth QD ID:B013763
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls. To confirm they
are operating properly, make a call:
1
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
On the phone, dial the number you want
2
to call and press SEND key on your phone.
If your phone and headset are successfully
3
paired, you will hear ringing on the headset.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© 2008 Motorola, Inc. All rights reserved.
USING A SECOND PHONE?
Multipoint technology allows you to make and
receive calls from two Bluetooth enabled
devices like your personal and business phones.
To pair a second phone to your headset, follow
these steps:
Turn off any phones or devices that are
1
already paired with your headset.
Turn off your headset by closing the
2
headset boom.
Perform Step 2 (“Start Bluetooth Feature”),
3
Step 3 (”Pair”), and Step 4 (”Test and Use”)
to pair your headset with your second phone.
Your most recently paired phone is now your
primary phone for voice dial functionality.
After you have successfully paired your phone
and headset, you don't need to repeat these
steps. For daily use, ensure that your headset is
turned ON and that your phone's Bluetooth
feature is ON.
To conserve power, close the boom to turn your
headset off. Re-open the boom to make a call.
TIPS FOR USING H15
WITH TWO PHONES
Use the following tips when using H15's
multipoint technology:
Incoming calls can be answered from both
phones:
– When answering a call, the idle phone is
disconnected from the headset.
– When the call ends, the idle phone is
automatically reconnected to the headset.
Last number redial dials the last outgoing call
made from the primary phone.
Voice dial is accessible from either phone via
different key actions:
To connect to both phones, turn on first
4
phone.
Close the headset boom and then re-open it.
5
The headset automatically connects to both
phones. The last paired phone is now your
primary phone for voice dial functionality.
– For your primary device (last paired
phone), tap the Call button until you hear
the tone.
– For your secondary device (other paired
phone), tap the Call button and either
Volume button until you hear the tone.
Loading...