Page 1
1 - 2 CONNECT
3 - 4 PAIR
5 TEST AND
USE
Get Connected in
5 Quick Steps
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The Bluetooth trademarks are
owned by their proprietor and used by Motorola, Inc. under
license. All other product or service names are the property of
their respective owners.
The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
© Motorola, Inc. 2005.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196 USA
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Part Number: 6809494A97-B
DC800
Bluetooth®
Home Stereo Adapter
2
Follow the numbered steps to connect
and use a Motorola Bluetooth® DC800
Home Stereo Adapter.
Note: The DC800 Home Stereo Adapter is
a Class 1 Bluetooth device. Bluetooth
features and Bluetooth Class 1 power
levels are not allowed for outdoor operation
in France. To avoid unlawful interference
with radio signals, do not use the Bluetooth
features in France unless you are indoors.
Note: To operate with the DC800 Home
Stereo Adapter, your Bluetooth audio
device must support A2DP Profile
capability.
Note: To maintain compliance with RF
exposure guidelines, you must keep the
DC800 Home Stereo Adapter at least 20
centimeters (8 inches) away from any
person.
POWER
CONNECTIONS
Plug the included AC power supply into
the Power Jack on the stereo adapter.
Plug the other end of the AC power supply
into a wall outlet.
1
2
Make the following power connection to
your stereo adapter:
Audio Out
Jacks
Audio In
Jacks
Make the following audio connections to your
stereo adapter (using the supplied cables):
Connect the Audio Out jacks on the stereo
adapter to unused Audio In jacks on your
home stereo system.
Connect the Audio In jacks on the stereo
adapter to unused Audio Out jacks (such as
Tape Out) on your home stereo system.
Note: If your home stereo does not support Line Out audio,
you may have to connect through the headphone jack with
the included RCA-to-headphone cable.
Note: To stream music from your phone (when equipped
with 2.5mm stereo output jack), use the included RCA-to-
2.5mm cable to connect to the adapter's Audio In jacks.
1
2
1
AUDIO
CONNECTIONS
Power Jack
PAIR WITH
BLUETOOTH HEADSET
3
Enable your gateway to transmit music to your
Bluetooth wireless headphone:
Note: This guide does not provide steps for pairing your
gateway with a
Bluetooth USB PC Adapter or a Bluetoothenabled PC. Consult the USB Adapter or PC's user guide
for details on completing this step.
Holding your headphone close to the
gateway, place the headset into pairing
mode.
If using the Motorola HT820 Bluetooth
Stereo Headphone, place in pairing mode
by pressing and holding the headphone's
Call button for approximately 6 seconds
until the indicator light is solidly lit. For
other products, refer to your headset's
user's guide for details.
Turn on the stereo adapter by pressing in
the Power button.
After a few moments,
the Pairing Button indicator light begins
blinking to indicate the power is on.
1
PAIR WITH BLUETOOTH
HEADSET
CONTINUED
3
Press and hold the Pairing button on the
stereo adapter until the indicator light
remains solidly lit (about 5 seconds).
The stereo adapter searches for Bluetooth
devices. When the stereo adapter finds the
headphone, the indicator light rapidly flashes
indicating that pairing is successful.
Once the connection is established, the
indicator light changes to a slower, pulsing
light.
3
PAIR WITH
BLUETOOTH PHONE
4
Turn on the stereo adapter by pressing in the
Power button.
After a few moments, the
Pairing button indicator light begins blinking
to indicate the power is on.
From the phone, perform a Bluetooth device
discovery while holding it close to the adapter.
The phone lists Bluetooth devices it finds.
Select Motorola DC800.
Select OK or Yes to pair your stereo adapter
and phone.
Enter the passkey: 0000
Select OK. The Pairing button indicator light
flashes rapidly to indicate pairing is successful.
1
3
4
5
6
Enable your stereo adapter to receive music
from the built-in MP3 player of your Bluetooth
A2DP-capable
phone:
Note: These steps are for most Motorola phones. Certain phones
require additional steps to enable stereo audio streaming (A2DP
Profile). See your phone's user's guide to verify proper steps.
5
TEST AND USE
Verify the headphone and stereo
adapter work together:
On your home stereo system, play
music from your favorite source and
turn the stereo receiver to that source.
Place the headphone on your head.
If your stereo adapter and headphone
are successfully paired, you will hear
music on the headphone.
1
2
To verify the phone and stereo
adapter work together:
On your phone, select and play MP3
music.
On your home stereo system, select
the input the adapter is connected to.
If your stereo adapter and phone are
successfully paired, you will hear the
MP3 music on your home stereo
system.
1
2
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
TROUBLESHOOTING
My stereo adapter doesn't find my
headphone.
Make sure the headphone is close to the stereo
adapter and in pairing mode, and the Pairing
button indicator light on your stereo adapter is
on and steady (see step 3).
My stereo adapter worked with my phone
before but now it's not working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone. If the
Bluetooth feature was turned off or was turned
on only temporarily, you may need to restart
the Bluetooth feature and pair your phone and
stereo adapter again (see step 4).
Support.
If you need more help, contact us at
1- 877-MOTOBLU.
FOR DETAILS ABOUT YOUR STEREO
ADAPTER
visit us at www.hellomoto.com/bluetooth and
click Support.
2
Pairing Button with
Indicator Light
Power Button
2
Page 2
BACK PANEL
CONNECTORS
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side to
complete initial setup of
your DC800.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side to
complete initial setup of
your DC800.
DC800
Bluetooth®
Home Stereo Adapter
Play MP3s from your home computer
or laptop and listen to them over your
home audio speakers using the
Motorola Stereo PC Adapter or
embedded Bluetooth module.
Use your stereo adapter with any
Bluetooth stereo audio device, even
products from other manufacturers.
●
●
FEATURES CONTINUED
FRONT PANEL
CONTROLS
Pairing Button with
Indicator Light
Power Button
The DC800 Home Stereo Adapter contains the
following front panel controls and indicators.
Housing
Feet
Housing feet are built-in and can be rotated
90 degress allowing the stereo adapter to
stand vertically. For horizontal orientation,
the feet remain flush for compact storage.
OPERATING WITH
BLUETOOTH DEVICES
Once paired with a Bluetooth device, the
stereo adapter automatically connects to the
device when it is in range and turned on.
The DC800 Home Stereo Adapter stores
pairing information for up to eight Bluetooth
devices. Device IDs are stored in the
gateway's memory in the order entered. If you
try to pair with more than eight devices, the
oldest paired device is removed from memory.
INDICATOR LIGHTS
The Pairing button indicator light provides status
information about your DC800.
Indicator Light Status
Off Power off
On (steady) Pairing mode
10 rapid flashes Pairing successful
Slow pulse Connected
(music playing)
Quick flash Standby
(not music playing)
DC800 FUNCTIONS
Function Action
Turn On DC800 Press in the Power
button. The DC800
attempts to connect
to the last device it
was connected to.
Enter Pairing Mode Press and hold the
Pairing button until
the indicator light
remains solidly lit
(about 5 seconds).
The DC800 scans
for Bluetooth devices.
Stop Audio Transmission Tap Pairing button.
(audio is transmitting)
Reenable Audio Tap Pairing button.
Transmission Indicator light blinks
with a slow pulse.
Turn Off DC800 Press the Power
button.
FEATURES
Your DC800 Home Stereo Adapter
connects to your home audio system
and turns it into a wireless music
system. With your DC800, you can:
Listen to music from your Bluetooth
phone's built-in MP3 player over your
home audio system speakers (for
phones that support streaming stereo
music over Bluetooth using A2DP
profile).
Play music on your home audio system
and send the music wirelessly to your
Motorola Bluetooth Stereo Headphone.
Use the stereo adapter's high power
Bluetooth (Class 1) with other Class 1
devices to roam around your house
further than the 30 foot range of most
Bluetooth products.
●
●
●
Audio Out
Jacks
Audio In
Jacks
Power Jack
When you see this symbol on a Motorola product,
do not dispose the product with household waste.
Recycling Mobile Phones and Accessories
Do not dispose of mobile phones or electrical
accessories, such as chargers or headsets, with your
household waste. In some countries or regions,
collection systems are set up to handle electrical and
electronic waste items. Contact your regional
authorities for more details. If collection systems
aren't available, return unwanted mobile phones or
electrical accessories to any Motorola Approved
Service Centre in your region.
The DC800 Home Stereo Adapter contains
the following back panel connectors.
For additional assistance visit our
website at:
www.hellomoto.com/bluetooth
or call Motorola Help desk at:
1-877-MOTOBLU (1-877-668-6258)
Loading...