Motorola BRAVOLX User Manual
A
™
CONTENTS
Introduction............................................................ 1
Controls................................................................. 1
Turning Your Pager On ......................................... 2
Turning Your Pager Off ......................................... 2
Receiving and Reading Messages........................ 3
Turning the Light On and Off................................. 4
Changing Alert Modes........................................... 4
Selecting an Audible Alert ..................................... 5
Setting the Time .................................................... 5
Setting the Alarm................................................... 6
Setting the Date..................................................... 6
Saving Messages.................................................. 7
Erasing Messages................................................. 7
Selective Erasing of Messages ............................. 7
Effective Use of Your
Battery Information................................................ 8
Features ................................................................ 9
Cleaning Your
Repair and Maintenance ..................................... 10
Patent Information............................................... 11
BRAVO LX
BRAVO LX
Pager............... 8
Pager........................ 10
Page
BRAVO LX
User’s Guide
INTRODUCTION
Congratulations on your purchase of a Motorola
BRAVO LX
advances in electronic and wireless technology
which allow you to receive numeric messages instantly and affordably.
CONTROLS
Buttons
W On/Read/Select − turn pager on, read incoming
V Backlight/Reset − turn the display light on and
X Menu - scroll through the menu.
After performing any pager function described in this
user’s guide (setting the time, date, alarm, and so
on), your
the standby screen and activates the selections you
made.
Function Indicators
[
Audible Alert − one of several pleasing audible
D
\ Alarm − the alarm alerts you at the set time.
=
Message Lock − this message is locked against
Continuous Message − more message informa-
B
pager. This compact pager uses many
messages, and select the function displayed.
reset the pager to the standby screen, which
shows time, date, alarm status, and alert status.
Press V twice to reset to the standby screen.
BRAVO LX
Silent Alert − the pager alerts without audible
alerts for incoming messages.
alerts sound for an incoming message.
deletion.
tion is on the next screen.
pager automatically returns to
TURNING YOUR PAGER ON
Press W to turn your pager on.
Your pager giv es an alert by either a sound or a vibra-
tion, indicating it is on. After displaying the power-up
screen, the time of day, the date, and an alert indicator are shown on the standby screen.
TURNING YOUR PAGER OFF
❶ Press Xuntil pager off? is displayed.
❷ Press W to turn your pager off.
NOTE: The pager displays the time and date, but not
an alert mode indicator. If the alarm is set, the alarm
indicator \ remains on the screen when the pager is
off.
1
2
RECEIVING AND READING MESSAGES
BRAVO LX
Your
character messages. When a message is received,
the pager alerts for eight seconds.
❶ Press any button to stop the alert.
❷ Press W to display the message.
❸ Press V twice while reading your message to
return to the standby screen.
Messages longer than 12 characters display on a
second screen, indicated by the
to display the second screen. The second screen is
displayed automatically after one minute, e v en if W is
not pressed.
The last screen of your message displays the message slot number and the time received.
If a message is not read, the pager gives a reminder
alert every two minutes and the screen displays the
number of unread messages (i.e., 1 Page, 2 Pages)
until all messages are read.
If the pager receives more messages than its available memory can hold, the new message replaces
the oldest read, unlocked message.
An overflow condition occurs when all message slots
are filled with unread messages and a new message
is received. Upon receipt of a message, while the
pager is in the overflow condition, the oldest unread
message is discarded. In this mode, the overflow indicator replaces the default idle display
with overflow. Messages must be read and er ased
to clear the overflow displa y.
pager can receive up to sixteen 20-
B
symbol. Press W
TURNING THE LIGHT ON AND OFF
❶ Press Vto turn the light on.
❷ To turn the light off, press V again. The light turns
off automatically two seconds after returning to
the standby screen.
CHANGING ALERT MODES
❶ Press X. Either silent ? or audio ? is
displayed, depending on the current mode.
❷ If audio ? is displayed, the pager is in “Silent”
mode. Press W to change to “Audible” mode. The
pager chirps.
❸ If silent ? is displayed, the pager is in “Audible”
mode. Press W to change to “Silent” mode. The
pager vibrates.
For your pager to vibrate when a message is received, it must be in “Silent” mode .
SELECTING AN AUDIBLE ALERT
❶ Press Xuntil set alert ? is displayed.
❷ Press W. The current alert number is displayed,
for example: alert 3, and the pager gives a
sample of the alert tone.
❸ Press Xuntil the desired alert type is displayed.
As each alert number is displayed, the pager
gives a sample of the alert tone.
❹ Press W to select the alert number, set the alert
tone to be used, and return to the standby screen.
When messages are received, your pager gives
the selected alert only when in the audible mode
SETTING THE TIME
❶ Press Xuntil set time ? is displayed.
❷ Press W to set the time. The hour flashes.
❸ Press Xto change the hour. Press W to switch to
the minutes. The first digit of the minutes flashes.
❹ Press Xto change the first minute digit. Press W
to switch to the second digit. The second digit of
the minutes flashes.
❺ Press Xto change the second minute digit. Press
W to switch to AM/PM. The a or p flashes.
❻ Press Xto change AM/PM.
3
D
.
4
❼ Press W to display the 12/24 hour screen.
❽ Press Xto change the 12/24 hour mode.
❾ Press Vtwice to return to the standby screen.
SETTING THE ALARM
❶ Press X until set alarm ? is displayed.
❷ Press W to select the alarm on/off sequence. on
or off flashes.
❸ Press Xto turn the alarm on or off. Press W to
switch to the hours. The hour flashes.
❹ Press Xto change the hour. Press W to switch to
the minutes. The first digit of the minutes flashes.
❺ Press Xto change the first minute digit. Press W
to switch to the second digit. The second digit of
the minutes flashes.
❻ Press Xto change the second minute digit. Press
W to switch to AM/PM. The a or p flashes.
❼ Press Xto change AM/PM.
❽ Press V twice to return to the standby screen.
Note: Steps 6 and 7 apply when in the 12 hour mode.
The symbol \ is displayed when the alarm is turned
on. The pager vibrates or gives a 20-second alert
and alarm is displayed at the selected time .
If set, the alarm activates even when the pager is off .
Press any button to stop the alarm alert.
SETTING THE DATE
❶ Press Xuntil set
❷ Press W. The month flashes.
date ? is displayed.
5
6
Loading...