Motorola BLUETOOTH STEREO HEADPHONES User Manual
BLUETOOTH
STEREO
HEADPHONES
Instruction Guide
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.
© Motorola, Inc. 2005. www.hellomoto.com
Table of Contents
Music source: Home Audio System
Wirelessly Listen to Music from Your Home Audio System on a Second Home Audio System
Wirelessly Listen to Music from Your Home Audio System on Bluetooth® Stereo Headphones
Wirelessly Listen to Music from Your Home Audio System on Bluetooth® Stereo Headphones
Music source: MP3 Player
Wirelessly Listen to Music from Your MP3 Player on Your Home Audio System
Wirelessly Listen to Music from Your MP3 Player on Bluetooth® Stereo Headphones Without Missing a Call
Wirelessly Listen to Music from Your MP3 Player on Bluetooth® Stereo Headphones
Music source: PC
Wirelessly Listen to Music from Your PC on Your Home Audio System
Wirelessly Listen to Music from Your PC on Bluetooth® Stereo Headphones Without Missing a Call
Wirelessly Listen to Music from Your PC on Bluetooth® Stereo Headphones (Option 1)
4
7
10
13
16
20
23
26
30
Wirelessly Listen to Music from Your PC on Bluetooth® Stereo Headphones (Option 2)
33
Wirelessly Listen to Music from Your Home Audio System
on a Second Home Audio System
Requires:
• Two Motorola Bluetooth® Home Stereo Adapters (DC800) *
Overview
The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your home audio
system on another home audio system.
Note: The distance between the two home stereo adapters can be up to 300 feet.
The initial setup procedure is:
Connect the first home stereo adapter to your music source.
Connect the second home stereo adapter to your audio listening device.
Pair the home stereo adapters.
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it is
easy to reconnect to the last device used after you have performed the initial pairing.
Connect Audio Cables
The provided cables allow you to connect the audio from your music source to the home stereo adapter.
The second stereo adapter connects to your audio listening device.
1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter.
Note: The jacks on your music source may be labeled Tape Out or Audio-R (red) and Audio-L (white or black).
Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect
from the headphone jack on your music source to the Audio In jacks on the home stereo adapter.
* The Motorola Bluetooth Home Stereo Adapter (DC800) is a Class 1 Bluetooth device. Bluetooth features and Bluetooth Class 1 power levels
are not allowed for outdoor operation in France. To avoid unlawful interference with radio signals, do not use the Bluetooth features in France
unless you are indoors.
To maintain compliance with RF (radio frequency) exposure guidelines, you must keep the Motorola Bluetooth Home Stereo Adapter (DC800)
at least 20 centimeters (8 inches) away from any person.
4
2. Connect the Line In jacks on your audio listening device to the Audio Out jacks on the second home stereo
adapter.
Note: The jacks on your audio listening device may be labeled Tape In or Audio-R (red) and Audio-L (white or
black).
Alternative: If you do not have two available Line In jacks, use the provided 3.5 mm to RCA cable to connect
from the microphone jack on your audio listening device to the Audio Out jacks on the second home stereo
adapter.
Connect Power Supply to Home Stereo Adapter
1. Connect the power supplies to the home stereo adapters using the provided power cords.
Pair the Stereo Adapters
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it is
easy to reconnect to the last device used after you have performed the initial pairing.
1. Turn on both stereo adapters.
5
2. On the home stereo adapter connected to your music source, press and hold the pairing button for about
5 seconds until the indicator light turns on and remains steadily lit. The stereo adapter connected to the
listening device is available to be found after it is turned on. When pairing is successful, the pairing button
changes from steadily lit to flashing.
Listen and Use
Play a song on your home audio system music source. You should hear the music on the speakers connected to
the second home audio system.
6
Wirelessly Listen to Music from Your Home Audio System
on Bluetooth® Stereo Headphones
Requires:
• Motorola Bluetooth® Home Stereo Adapter (DC800) *
• Motorola Bluetooth Stereo Headphones (HT820)
Overview
The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your home audio
system on your Motorola Bluetooth Stereo Headphones (HT820).
The initial setup procedure is:
1. Charge the battery in your stereo headphones.
2. Connect the home stereo adapter to your home audio system.
3. Pair the home stereo adapter and stereo headphones.
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so
it is easy to reconnect to the last device used after you have performed the initial pairing.
Charge the Stereo Headphones
Your stereo headphones have a non-removable rechargeable battery. A Motorola charger is included with your
headphones. You can also use a Motorola Original™ Vehicle Power Adapter (sold separately) to charge your
headphones while in your vehicle.
Before using the headphones for the first time, charge them for 2 hours as follows. You cannot use the
headphones while they are charging.
4. Plug one end of the Motorola charger into the stereo headphones and the other end into an electrical outlet.
5. While the battery is charging, the indicator lights are steadily lit. When the battery is fully charged, the lights
turn off.
6. Unplug the charger from the outlet, then disconnect from the stereo headphones.
* The Motorola Bluetooth Home Stereo Adapter (DC800) is a Class 1 Bluetooth device. Bluetooth features and Bluetooth Class 1 power levels
are not allowed for outdoor operation in France. To avoid unlawful interference with radio signals, do not use the Bluetooth features in France
unless you are indoors.
To maintain compliance with RF (radio frequency) exposure guidelines, you must keep the Motorola Bluetooth Home Stereo Adapter (DC800)
at least 20 centimeters (8 inches) away from any person.
7
Connect Audio Cables
The provided cables allow you to connect the audio from your home audio system to the home stereo adapter.
Note: Avoid removing any existing cable connections on your home audio system. Removing them might prevent
your home audio system or the home stereo adapter from functioning properly.
1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter.
Note: The jacks on your music source may be labeled Tape Out or Audio-R (red) and Audio-L (white or black).
Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect
from the headphone jack on your music source to the Audio In jacks on the home stereo adapter.
Connect Power Supply to Home Stereo Adapter
1. Connect the power supplies to the home stereo adapters using the provided power cords.
8
Pair the Stereo Headphones and Home Stereo Adapter
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it
is easy to reconnect to the last device used after you have performed the initial pairing.
1. Make sure the stereo headphones are turned off and unplugged. If the headphones are on, press and hold the
Call button for about 3 seconds until the indicator light flashes rapidly and turns off.
2. Place the stereo headphones as close as possible to the home stereo adapter (about 1 - 3 inches is
recommended).
3. On the stereo headphones, press and hold Call button for about 6 seconds until the indicator light turns on and
remains steadily lit.
4. On the home stereo adapter, press and hold the pairing button for about 5 seconds until the indicator light
turns on and remains steadily lit. When pairing is successful, the pairing button on the home stereo adapter
flashes rapidly and the indicator light on the headphones changes from steadily lit to flashing.
Listen and Use
Play some music on your home audio system. You should hear the music on your stereo headphones.
For information on using the music controls on the stereo headphones,
visit www.hellomoto.com/bluetoothsupport.
9
Wirelessly Listen to Music from Your Home Audio System
on Bluetooth® Stereo Headphones
Requires:
• Motorola Bluetooth® Home Stereo Adapter (DC800)*
• Motorola Bluetooth Stereo Headphones (HT820)
Overview
The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your home audio
system on your Motorola Bluetooth Stereo Headphones (HT820).
The initial setup procedure is:
1. Charge the battery in your stereo headphones.
2. Connect the home stereo adapter to your home audio system.
3. Pair the home stereo adapter and stereo headphones.
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it
is easy to reconnect to the last device used after you have performed the initial pairing.
Charge the Stereo Headphones
Your stereo headphones have a non-removable rechargeable battery. A Motorola charger is included with your
headphones. You can also use a Motorola Original™ Vehicle Power Adapter (sold separately) to charge your headphones while in your vehicle.
Before using the headphones for the first time, charge them for 2 hours as follows. You cannot use the headphones while they are charging.
4. Plug one end of the Motorola charger into the stereo headphones and the other end into an electrical outlet.
5. While the battery is charging, the indicator lights are steadily lit. When the battery is fully charged, the lights
turn off.
6. Unplug the charger from the outlet, then disconnect from the stereo headphones.
* The Motorola Bluetooth Home Stereo Adapter (DC800) is a Class 1 Bluetooth device. Bluetooth features and Bluetooth Class 1 power levels
are not allowed for outdoor operation in France. To avoid unlawful interference with radio signals, do not use the Bluetooth features in France
unless you are indoors.
To maintain compliance with RF (radio frequency) exposure guidelines, you must keep the Motorola Bluetooth Home Stereo Adapter (DC800)
at least 20 centimeters (8 inches) away from any person.
10
Connect Audio Cables
The provided cables allow you to connect the audio from your home audio system to the home stereo adapter.
Note: Avoid removing any existing cable connections on your home audio system. Removing them might prevent
your home audio system or the home stereo adapter from functioning properly.
1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter.
Note: The jacks on your music source may be labeled Tape Out or Audio-R (red) and Audio-L (white or black).
Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect
from the headphone jack on your music source to the Audio In jacks on the home stereo adapter.
Connect Power Supply to Home Stereo Adapter
1. Connect the power to the home stereo adapter using the provided power cord.
11
Loading...