Moog P1800TB Specsheet

PRODUCT SPECIFICATION

matrix systems and controls

QD104 Series Digital Quad Video Processor

COLOR/BLACK-WHITE, ALARMS

Product Features

• High-Quality Quad Display (1024H x 512V)

• Real-Time Quad Video

• Low Cost

• Four Camera Inputs with Four Looping Outputs

• Quad Monitor Output That Displays Continuous Four-Camera Image

• Call Monitor Output That Displays Full-Screen or Quad Image

• Sequencing of Full-Screen and Quad Views

• Automatic Time-Base Correction Eliminates the Need for Camera

Synchronization

• Five Alarm Inputs, One Alarm Output

The

QD104 Series Quad

black-white video processor capable of displaying full-screen or quad views of four camera inputs.

A quad monitor output displays a continuous quad image. For greater versatility, a call monitor output offers several additional viewing options. For more detail or easier viewing, the call monitor output can display a full-screen view of any camera output. Or this output can be used to display the quad image on a second monitor. And the call monitor output supports sequencing. Sequencing can include full-screen views of any of the four cameras as well as the quad image. Camera selection and sequence programming for the call monitor is done with front panel push buttons.

All camera inputs have looping outputs that add to the capability of the quad by providing connections for additional video equipment.

is a high quality, low cost, color/

There are ﬁve alarm inputs, one for each of the four cameras, plus one for the quad input. When there is an alarm, that camera is switched to the call monitor’s output for the duration of the alarm or until an operator acknowledges the alarm by pressing the front panel button associated with the alarmed camera. Multiple alarms will sequence at a two-second rate. An alarm output can trigger a VCR or an external alarm indicator, such as a light or buzzer.

The quad comes in a desktop cabinet of the same style as the

Genex

Series multiplexer. A 9-inch (23 cm) monitor can be placed on top of the unit. A separate rack kit provides all the hardware necessary to mount one or two quads in a standard 19-inch (48 cm) equipment rack. The rack kit includes a ﬁller panel when installing a single quad.

A real-time quad update rate assures live video on all camera outputs. And automatic time base correction means no external synchronization of cameras is required. If any camera input loses video, the monitor display for that camera appears black.

C660 / REVISED 1-07

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

MODELS

QD104C Color quad, NTSC, 120 VAC, 60 Hz QD104M Black-white quad, EIA, 120 VAC, 60 Hz

VIDEO

Input Level 1 Vp-p, composite Video Standard 525 lines, 60 ﬁelds/second Digital Image 1024 (H) x 512 (V) pixels Quad Update Rate Real time Analog Frequency

Response Better than 12 MHz Crosstalk at Color

Subcarrier Better than -60 dB Differential Gain Less than 2 percent Differential Phase Less than 2 degrees Signal-to-Noise Ratio Better than -60 dB

ELECTRICAL

Operating Voltage 12 VAC; unit includes power supply Power 6 watts Video Inputs Four, BNC, looping, 75-ohm/Hi Z termination Monitor Outputs Two, BNC, 75 ohms Alarm Inputs Five N.O. inputs Alarm Output 10K ohm output resistance; TTL, CMOS

compatible Alarm Clearance Automatic with manual override Sequence Dwell Times Programmable for 2, 4, 8, or 16 seconds

GENERAL

Operating Temperature 32° to 120°F (0° to 49°C) Relative Humidity 95%, non-condensing Dimensions 1.73" H x 10.20" D x 8.44" W

(4.39 x 25.90 x 21.43 cm) Finish Charcoal gray Unit Weight 3 lb (1.36 kg) Shipping Weight 4 lb (1.81 kg) approximate

CERTIFICATIONS

• FCC, Class B (QD104C)

• FCC, Class A (QD104M)

OPTIONAL ACCESSORIES

RK100 Rack-mount kit (1 RU) for mounting one or two

QD100 Series Quads in a standard 19-inch

rack. Blank ﬁller panel provided.

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

Notice: Judgment as to the suitability of the products for users’ purposes is solely the users’ responsibility. Users should refer to the Operation manuals for cautionary statements regarding user selected options and how they might affect video quality. Users shall determine the suitability of the products for their own intended application, picture rate and picture quality. In the event users intend to use the video for evidentiary purposes in a judicial proceeding or otherwise, users should consult with their attorney regarding any particular requirements for such use.

Pelco, the Pelco logo, and Genex are registered trademarks of Pelco, Inc.

Product speciﬁcations and availability subject to change without notice.