Moog NTK2TH-SD-3 Specsheet
NiteTrac 2
Thermal Pan / Tilt Imaging System for Night Surveillance
Hindered by night surveillance or low light applications?
Videolarm’s NiteTrac 2 system provides a state-of-the-art
solution to combat night surveillance by incorporating both
an advanced thermal and day / night camera system to a
high performance pan / tilt device.
Benet from the versatility of thermal video surveillance,
including a more covert monitoring experience vs standard
lighting or infrared illumination, ability to see through
several types of obstacles, and maximize detection by
targeting items that emit heat.
Oering 360° of continuous rotation and a sealed /
pressurized enclosure, the NiteTrac 2 comes factory-wired for
a true “Plug n’ Play” experience.
KEY FEATURES
• Advanced thermal camera (320 x 240 resolution) and day /
night camera systems
• Compact/ light weight design
• Rugged pan / tilt device with 360° continuous high-speed
rotation
• Mil-STD-810F, (Certied), sealed / pressurized
enclosure – IP66 rating
• Pelco D protocol translation - and support
• 26x Day / Night optical zoom
• 10 – 30VDC volt operation
• Factory-wired; true “Plug n’ Play” experience
• No exposed wiring
• Image Stabilization
NiteTrac 2
FPA Uncooled Microbolometer
Spectral Range 7-14 µm
Resolution 320 x 240
FOV 12°/H x 9°/V
Frame Rate 30 Hz (NTSC)
Analog Video Output PAL (768 x 574 pixels) or
NTSC (640 x 480 pixels
Controls Digital Zoom, Video Polarity, Video Format
Sensitivity
‹ 0.50 mK
Anti- blooming Active
Lens 12°W Athermalized, External Manual
Focus Adjustment
NiteTrac2 Thermal Camera Specications Chart
Image Sensor
¼”
Signal Format NTSC, PAL
Horizontal Resolution
470 TVL - NTSC
Digital Zoo 10x (260x with optical zoom)
Angle of View 54° (wide) to 2.5° (tele)
Min. Illumination Color:
B&W:
3 kux @ 1/60s, .2 lux @ ¼s
0.02 lux (¼s, IR cut lter removed)
S/N ratio 50 dB
Shutter Speed Auto/Manual (manual ½s -
1/30,000s)
White Balance Auto/Manual
Iris Control
Auto/Manual
Focusing System Auto/Manual
Low Light IR Auto/Manual
Backlight Compensation On / O
NiteTrac2 Camera Specications Chart
NiteTrac 2: Models
NiteTrac 2 with Thermal Imaging: NTK2TH-SD-3
Thermal camera: high resolution, 30 micron detector (320 x 240) Day / Night
camera, 26x optical and 12x digital zoom
Electrical Specications
Input Voltage: 10 to 30 VDC w/ reverse
polarity
Microprocessor Control: 32 presets and 2 preset tours
Environmental Specications
Operating Temperature: (-30° C to + 55° C)
Thermal Imaging - Benets
Thermal imaging provides a wealth of benets / features that far surpass alternate night
surveillance products (IRs and traditional bulbs).
• Targets objects that emit heat, resulting in quick detection and counter reactions.
• See through several types of obstacles, including fog, rain, and brush.
• Increase eld of view over traditional light bulbs and infrared illumination
alternatives.
Camera Specications Day & Night Thermal
Product Specications
Materials :
Enclosure:
Motor Type/Drive: Steppers with belt drive
Connector: Mil spec, bottom pigtail
Weight: Less than 22lbs (10kg) with
Control Formats: Serial RS422/RS485
Limits: Fixed tilt hard limit,
Repeatability: .25˚
Marine Resistant: Paint, bearings and gaskets
Position Feedback
Resolution and Readout:
Aluminum housing, stainless
steel hardware
IP67, sealed and pressurized
camera housings
dual cameras
adjustable soft limits
.01˚
Mechanical Specications PAN/TILT
Pan Movement: 360° Continuous pan rotation
Pan Speeds:
Tilt Speeds:
Tilt Range: -90° to +90˚ non-continuous
0.25˚ – 100˚/sec
.25˚ – 60˚/sec
Accessories
WMNT12:
Wall mount bracket
VLC485: RS485 Controller
Desk top model / 24Vac
input power with joystick
TriView : Tripod
Rapid deployment
tripod system
PB24L24 / 58:
2.4GHz or
5.8GHzwireless
box w/ an omnidirectional antenna
Loading...