modway MOD-5423, MOD-5424, MOD-5422, MOD-5421, MOD-5425 User Manual
...
MOD-5421/5422/5423/5424/5425/5426 BED
Thank you for purchasing the MODWAY BED！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approx assembly time: 45 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.
Hardware:
Component:
P1
P9
P5
P4
P11
A
B
C
D
E
F
G
H
P7
P10
Bolt M8x20mm x28
Bolt M8x35mm x12
Bolt M8x60mm x3
Spring Washer x8
Flat Washer x8
Nut M8 x6
Allen Wrench x1
Open Wrench x1
P13
P3
P3
P8
P8
P2
P4
P6
P12
P14
P10
P9
Headboard x1
P1 P2
Metal Corner x4
P5
Leg x2
P9
P12
Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 6
Center Support Leg x1
Footboard x1
Stretcher x1
P6
Short Support Leg x2
P10
P13 P14
Plastic Cover x12
Side Rail x2
P3
Center Rail x2
P7
Side Rail x2
P4
Leg x2
P8
Long Support Leg x2
P11
Slat x24
MOD-5421/5422/5423/5424/5425/5426 BED
STEP 1:
Attach 1 piece of Leg (P8) and 1 piece of Leg (P9) into Headboard (P1) as shown.
Secure by using 4 pieces of Bolt (B), 4 pieces of Spring Washer (D) and 4 pieces of Flat Washer (E).
Use Allen Wrench (G) to tighten Bolts (B) clockwise until secure.
Repeat the same steps for Footboard (P2).
P1
P9
P1
P8
P8
E
D
E B
D
G
B
Bx8 Dx8 Ex8
STEP 2:
Attach 2 pieces of Metal Corner (P5) into Headboard (P1).
Secure by using 4 pieces of Bolt (A) as shown.
Use Allen Wrench (G) to tighten Bolts (A), do not fully tighten Bolts (A) at this step.
Repeat the same steps for Footboard (P2).
Gx1
P8
P2
P9
Hardware & Tool required
P1
P5
A
P5
P5
P1
P2
A
P5
G
P5
Ax8 Gx1
Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 6
Hardware & Tool required
Loading...