Mitsubishi XD3200U Brochure

MULTIMEDIA DATA / VIDEO PROJECTORS

e New WD3300U and XD3200U
Comfort Redened

Large-screen reproduction of high-quality images. Breathtaking and powerful.

But image quality is not the only improvement to our large-screen projectors.

Mitsubishi Electric’s new projectors are designed for easy installation and maintenance,

superior operability and a comfortable viewing experience.

Welcome to the future of high-lumen projectors.

4000

lm

4500

lm

Operation simplified with Mitsubishi Electric’s user-friendly design

Low Maintenance & High Durability

New Color Wheel System

Dust would easily accumulate on the color wheel sensors of previous models. However,

the sensor is now mounted in the rotary shaft motor casing, which is almost fully enclosed,

making it much more resistant to dust.

Previous color wheel

Photo Sensor

Timing
Mark

Optical Signal

TM

DLP

projectors are virtually airtight, therefore an intake filter isn’t needed, eliminating

Dust would accumulate on
the sensor and thick part of the
timing mark, blocking the light
path when using the light
signal method. This dust
build-up interferes with the
color distinction process,
causing poor color alignment.

the need for filter changing and ultimately lowering overall cost.

New color wheel

Fixed

Hall­effect IC

Less than 1mm

Magnet

Magnetic Signal

Filter free

The base spins together with the color wheel.
The wind pressure created by the centrifugal
force keeps dust from entering through the gap
(less than 1mm or 1/25in). The magnet is
embedded in the base, so there is no protruding
part for dust to accumulate on. Since a magnetic
signal method is used, the signal passes through
any dust without the problem of color distortion.

WXGA

XGA

New Lamp Drive System

Arc Discharge

Electrode

100%

Electrode Abrasion

0%

Up until now, the electrodes in the lamp deteriorated quicker when using
the projector for extended periods of time, resulting in a loss of brightness.
These projectors incorporate an optical design that optimizes lamp operation
to realize a lamp drive that makes it possible to stabilize the shape of the
electrode during long-term use. As a result, the maximum lamp service life
is obtained for every projection mode and loss in projection brightness is
extended over a longer period of time.

Initially, the gap between the
electrodes is small and the
arc density is high, resulting
in high brightness.

Conventional Lamp
Drive System

New Lamp Drive System

Total Lamp Usage in Hour

The distance between the electrodes
increases as they wear. This causes
a decrease in arc density, which also
results in a loss of brightness.

Adoption of a new lamp drive system
prevents electrode wear—giving the
lamp a longer service life and enabling
it to retain projection brightness over
a longer period of time.

Long 4000hr Lamp Life

The WD3300U/XD3200U has a lamp temperature

controlling system that enables an estimated lamp life

of up to 4000hours.*

reductions in overall cost of ownership by reducing

the frequency of lamp replacement.

Lamp Replacement Frequency*

2,000hr lamp

Original Lamp

4,000hr lamp

(*1): When lamp is used in “Low” mode. Maximum life in “Standard” mode is 2000hr.
(*2): Lamp life refers to the average time required for brightness to be reduced by half, and not
the time specified in the warranty. Usage time may vary widely according to the environment
and conditions, and whether or not cleaning and other maintenance procedures are followed.

1

Long-life lamps make dramatic

2

Original Lamp

2,000 hours

1st replacement

Reduced

Replacements

4,000 hours

Lamp

Side Access Lamp & Center Lens Designs

The lamp can be accessed from the side of the

projector, simplifying the replacement process, as the

projector does not have to be turned around when

sitting on a shelf or turned

over when suspended from

the ceiling. The center-set

lens design makes set-up

easy since the projector

lens need only be aligned

with the center of the screen.

Quick Lens Change

The top cover has a removable section around the

lens. This advanced feature enables the lens to

be changed without removing the entire top cover.