Mitsubishi Electronics PMX 602 User Manual

6 Channel Mixer Amplifier

INSTRUCTION

PMX 602

1.

OWNERS MANUAL

RISOUE DE CHOCKRISOUE DE CHOCK

ESECTRIQUE N OUVREZESECTRIQUE N OUVREZ

TO PREVENT ELECTRONIC SHOCK DO NOT REMOVE

TOP OR BOTTOM COVERS . NO USER SERVICEABLE

PARTS INSIDE SERVICING TO QUALIFIED SERVICE

PERSONNEL .DISCONNECT POWER CORD BEFORE

REMOVING BACK PANEL COVER TOACCESS GAIN

SWITCH .

WARNING!

TO REDUCE THE RISK OF ELECTRIC SHOCK ,

DO NOT EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE .

A PREV ENIR LE CHOC ELECTRIQUE N ENLEVEZ

PAS LES COUVERTURES , RIEN DES PARTILES

UTILES AL INT ERIEUR .DEBR ANCHER LA BORNE

AVANT D DUVRIR LA MODULE EN ARRIERE

Magnetic Field

Watch for these symbols:

The exclamation point Trangie

is used to important operating

or maintenance instructions .

CAUTION ! noticed sensitive high - gain equipment

such as pre amplifiers or tape desks directly above or

below the unit .Because this amplifier has a high power

dansk .It has a strong magnetic field which can induce

hum into unshielded devices that are locating nearby .

The field is strongest just above and below the unit . If

and equipment rack is used .We recommend locating the

amplifier(s) in the bottom of the rack and the pre amplifier

or other sensitive at the top .

The lighting bolt triangle is used

to alert .User to the risk of electric

shock .

2.

OWNERS MANUAL

PMX602