Mitsubishi LANCER EVOLUTION-V, LANCER EVOLUTION-IV TECHNICAL INFORMATION MANUAL

ENGINE

ELECTRICAL

CONTENTS

16-1

CHARGING SYSTEM 2. . . . . . . . . . . . . . . .

ALTERNATOR 2. . . . . . . . . . . . . . . . . . . . . . . . . . .

IGNITION SYSTEM 4. . . . . . . . . . . . . . . . . .

ON-VEHICLE SERVICE 4. . . . . . . . . . . . . . . . . . .

1. Ignition Coil with Built-in Power Transistor

Check 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Spark Plug Check, Cleaning, and

Replacement 4. . . . . . . . . . . . . . . . . . . . . . . . . .

CAMSHAFT POSITION SENSOR AND
CRANK ANGLE SENSOR

5. . . . . . . . . . . . .

16-2

ENGINE ELECTRICAL – Charging System

CHARGING SYSTEM

ALTERNATOR

REMOVAL AND INSTALLATION

Pre-removal Operation

(1) Under Cover Removal
(2) Engine Mount Removal
(3) Strut Tower Bar Removal

12 – 15
{1.2 – 1.5}

6

9 {0.9}

22 {2.2}

Post-installation Operation

(1) Strut Tower Bar Installation
(2) Engine Mount Installation
(3) Under Cover Installation
(4) Drive Belt Tension Adjustment

(Refer to GROUP 11 – On-vehicle Service.)

3

10 – 13
{1.0 – 1.3}

2

4

7

12 {1.2}

24 {2.4}

1

Removal steps

AA" 1. Drive belt (Power steering, A/C)
AB" 2. Delivery pipe, injector and pressure

regulator assembly

3. Oil level gauge guide

5

44 {4.5}

Unit: Nm {kgf@m}

4. Pressure hose connection

AC" 5. Alternator

6. Water pump pulley

7. Alternator brace