This Workshop Manual contains procedures
forremoval,disassembly,inspection,
adjustment, reassembly and installation, etc.
for service mechanics.
Allinformation,illustrationsandproduct
descriptions contained in this manual are
current as at the time of publication. We,
however, reserve the right to make changes
at any time without prior notice or obligation.
FILING INSTRUCTION
Please keep these manual pages in the binder
No. BN940001.
File these pages according to the signs
“Added”, “Revised” and “Deleted” on the “List
of effective pages” which are interpreted
below.
Added:
File the pages with this sign additionally in
your manual.
Revised, Deleted:
Replacetheexistingpageswiththe
corresponding pages with this sign.
Clutch
.........................................
F5MR1, F5MR2, F5MR3
Clutch
.........................................
F5M41, F5M42, W5M42
Manual Transmission
F5MR1, F5MR2, F5MR3
Manual Transmission
F5M41, F5M42, W5M42
Manual Transmission
F5M51
....................
....................
....................
21A
21B
22A
22B
22C
Missing sheets will be supplied upon request.
Mitsubishi Motors Corporation Jun. 2000
E
Pub. No. PWEE9508-G
INTRODUCTION
EXPLANATION OF MANUAL CONTENTS
Maintenance and Servicing Procedures
(1) A diagram of the component parts is
provided near the front of each section in
order to give the reader a better understanding of the installed condition of
component parts.
(2) The numbers provided with the diagram
indicate the sequence for maintenance and
servicing procedures.
: Indicates a non-reusable part.
The tightening torque is provided where
applicable.
Classification of Major Maintenance/Service Points
When there are major points relative to maintenance and servicing procedures
(such as essentialmaintenance and service points, maintenance and service standard values, information regarding the use of special tools, etc.), these are
arranged together as major maintenance and service points and explained in
detail.
AA" : Indicates that there are essential points for removal or disassembly.
"AA : Indicates that there are essential points for installation or reassembly.
D Removal steps:
The part designation number corresponds
to the number in the illustration to indicate
removal steps.
D Disassembly steps:
The part designation number corresponds
to the number in the illustration to indicate
disassembly steps.
D Installation steps:
Specified in case installation is impossible
in reverse order of removal steps. Omitted
if installation is possible in reverse order
of removal steps.
D Reassembly steps:
Specified in case reassembly is impossible
in reverse order of disassembly steps.
Omitted if reassembly is possible in reverse
order of disassembly steps.
Symbols for Lubrication, Sealants and Adhesives
Information concerning the locations for
lubrication and for application of sealants
and adhesives is provided, by using symbols, in the diagram of component parts, or
on the page following the component parts
page, and explained.
: Grease (multipurpose grease unless
there is a brand or type specified)
: Sealant or adhesive
: Brake fluid, automatic transmission fluid
: Gear oil
INTRODUCTION
Indicates the
group title.
Indicates the
section title.
Indicates the
group number.
Indicates the
section number.
Indicates the
page number.
Denotes tightening
torque.
Denotes non-reusable part.
Apply gear oil to all
moving parts before
installation.
This number corresponds to
the number appearing in
“Removal steps”,
“Disassembly steps”,
“Installation steps” or
“Reassembly steps”.
Operatingprocedures,cautions, etc. on removal, installation, disassembly and reassembly are described.
Issue date
Publication number-Revision code
LIST OF EFFECTIVE PAGES
PageRevision
Code
21A-0-1May 1995
21A-1-1BMay 1996
21A-2-1May 1995
21A-3-1 to 21A-3-3May 1995
21A-4-1 and 21A-4-2May 1995
21B-0-1EJun. 1998
21B-1-1 and 21B-1-2EJun. 1998
21B-2-1 and 21B-2-2EJun. 1998
21B-2-2a to 21B-2-2dEJun. 1998
21B-2-3EJun. 1998
21B-2-4CJan. 1997
21B-2-4aEJun. 1998
21B-2-4bCJan. 1997
21B-3-1EJun. 1998
21B-3-2CJan. 1997
21B-3-2aCJan. 1997
22A-0-1BMay 1996
22A-0-2 and 22A-0-3May 1995
22A-0-4BMay 1996
22A-1-1EJun. 1998
22A-1-2BMay 1996
22A-2-1 to 22A-2-4BMay 1996
22A-3-1 and 22A-3-2BMay 1996
22A-3-2a and 22A-3-2bBMay 1996
22A-3-3May 1995
22A-3-4 to 22A-3-16BMay 1996
22A-4-1 to 22A-4-9BMay 1996
22A-5-1 to 22A-5-6BMay 1996
22A-6-1 to 22A-6-6BMay 1996
22A-7-1 to 22A-7-3May 1995
22A-8-1 and 22A-8-2BMay 1996
22B-0-1GJun. 2000 Revised
22B-0-2ANov. 1995
22B-0-3 to 22B-0-6FJuly 1999
22B-0-7EJun. 1998
22B-1-1 and 22B-1-2FJuly 1999
22B-1-2a and 22B-1-2bFJuly 1999
22B-1-2c and 22B-1-2dGJun. 2000 Revised
22B-1-2eGJun. 2000 Added
22B-1-3EJun. 1998
22B-1-4 to 22B-1-9FJuly 1999
22B-2-1 to 22B-2-4EJun. 1998
22B-3-1 to 22B-3-4ANov. 1995
22B-3-5FJuly 1999
DateRemarksPageRevision
Code
DateRemarks
22B-3-6 to 22B-3-9ANov. 1995
22B-4-1FJuly 1999
22B-4-2 to 22B-4-8EJun. 1998
22B-5-1 and 22B-5-2FJuly 1999
22B-5-2a and 22B-5-2bFJuly 1999
22B-5-3 to 22B-5-6ANov. 1995
22B-5-7GJun. 2000 Revised
22B-6-1 to 22B-6-5EJun. 1998
22B-6-6GJun. 2000 Revised
22B-7-1 and 22B-7-2FJuly 1999
22B-7-2a and 22B-7-2bFJuly 1999
22B-7-3 and 22B-7-4ANov. 1995
22B-7-5FJuly 1999
22B-7-6GJun. 2000 Revised
22B-7-7FJuly 1999
22B-8-1 and 22B-8-2FJuly 1999
22B-8-3 to 22B-8-8EJun. 1998
22B-8-9GJun. 2000 Revised
22B-8-10EJun. 1998
22B-9-1EJun. 1998
22B-10-1ANov. 1995
22B-11-1ANov. 1995
22B-12-1EJun. 1998
22B-12-2CJan. 1997
22B-12-2aCJan. 1997
22B-13-1 and 22B-13-2EJun. 1998
22B-13-3FJuly 1999
22B-14-1ANov. 1995
22B-14-2FJuly 1999
22B-15-1 to 22B-15-4EJun. 1998
22B-16-1 to 22B-16-3EJun. 1998
22B-17-1 to 22B-17-3EJun. 1998
22C-0-1 to 22C-0-3CJan. 1997
22C-1-1DNov. 1997
22C-1-2 to 22C-1-6CJan. 1997
22C-2-1 to 22C-2-3CJan. 1997
22C-3-1 to 22C-3-8CJan. 1997
22C-4-1 to 22C-4-7CJan. 1997
22C-5-1 to 22C-5-8CJan. 1997
22C-6-1CJan. 1997
22C-7-1CJan. 1997
22C-8-1CJan. 1997
22C-9-1 to 22C-9-3CJan. 1997
22C-10-1 to 22C-10-3CJan. 1997
22C-11-1 and 22C-11-2CJan. 1997
22C-12-1 to 22C-12-3CJan. 1997
Missing sheets will be supplied upon request.
E
Jun. 2000Mitsubishi Motors CorporationRevised
PWEE9508-G
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.